HELP! Live or death question :(

Hello guys
im in the final week of a college project and i need to do some things in labview.
I am receving from a FPGA trhough serial communication. The transmission is working OK as i receive the data im sending from the FPGA. With this, my fpga is sending 8 bits packets.what i need to to is to put them is a matrix or table is an especific way.
sorry if this is not very understandable. here is a picture of what im looking.
the matrix or table has 4 colums (1 to 4 from right to left) and 16 rows (1 to 16 from top to buttom). the first 8bit packet needs to be placed on colum 1-row 1. next packet in colum2-row 1 and so on. when it gets to colum 4-row1, the next packet needs to be placed in colum 1-row 2 and so on.
i really hope someone could give me some suggestions.
Solved!
Go to Solution.
Attachments:
Dibujo.JPG ‏32 KB

Initialise a 64 element 1D array
Each new packect needs to replace the next element of the array starting at 0.
OR
Enlarge an array with build array with each new packet.
Reshape the array to be 2D.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Similar Messages

Live Streaming Basic Question

I am using the AWS version of the flash media server and attempting to stream content however, I am getting stuck. Following the instructions at http://help.adobe.com/en_US/flashmediaserver/amazonec2/WS6fc2df2b6d2ce24359910e2812c396a83 eb-7ff8.2.html, it says "4. Go to the Flash Media Playback Setup page at http://www.osmf.org/configurator/fmp/ and do the following:" That link is broken. Can you advise where the updated link is?
Thanks,
Matt

The answer was to go back to Wowza. Adobe dropped the ball.
RT
ashish gupta. <mailto:[email protected]>
December 15, 2014 at 3:44 AM
>
Live Streaming Basic Question
created by ashish gupta.
<https://forums.adobe.com/people/ashish+gupta.> in /Adobe Media
Server/ - View the full discussion
<https://forums.adobe.com/message/7015154#7015154>

Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

What about this?
https://itunes.apple.com/ru/app/best-secret-folder/id488030828?l=en&mt=8

Please help me with this questions "if I purchased items through mac or windows is it possible to re-download those purchases on Apple TV though iCloud"

Please help me with this questions "if I purchased items through mac or windows is it possible to re-download those purchases on Apple TV though iCloud"

It depends on what country you're in and whether or not they're still available in the iTunes Store. Some purchased movies and all rentals won't be available.
(108225)

Please help me with some questions with batch input session?

hello everyone.
I come to some questions like
1 What is a batch input session ,
2 What is the alternative to batch input session?
3 An ABAP program creates a batch input session.   We need to submit the program and the batch session in back ground. How to do it?
   would you please help me with the questions, couldn't thank you more.
   Best regards
                                                                      Frank

Hi
Batch Input Session:
BATCH INPUT SESSION is an intermediate step between internal table
and database table. Data along with the action is stored in session
ie data for screen fields, to which screen it is passed, program
name behind it, and how next screen is processed.
Three processing modes of executing Batch Input Session :-
Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
Display Errors only : You can correct faulty transactions online.   Transactions not yet executed, but without error, run in the background.
Run in Background .
2) What is the alternative to batch input session?
Call transaction.
3) An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
go to SM36 and create background job by giving
     job name,job class and job steps (JOB SCHEDULING)

HELP NEEDED WITH SOME QUESTIONS

Could ye guys help, I have some questions and I dont know the answers of them! any solutions would be great
Distinguish between composition and inheritance as used in object-oriented programming. As part of your answer, provide examples of different situations in which each would be more appropriate.
What is meant by recursion as an algorithmic strategy in working with abstract data structures, and why is such an approach considered worthwhile? Illustrate your answer with an example sorting algorithm in Java that can be sorted linearly and recursively.
Given an alphabet of {x,y,z} possessing the following frequency distributions {1/8, 1/4, 5/8}, show how this information may be used to construct a prefix code binary tree. Given the code 11000111100, show how this is decoded using this construct.
Any ideas??

086kerry wrote:
lad if you had seen what I had to do already, its not as if I want the answers, just help. I cant find anything satisfactory on the web.Not to quick are ye?
If you can't do more than post your assignment and cry for help then you might as well give up now. Nobody is going to do your work for you. You have done NOTHING yet so start working on it and if you run into problems come back with your code and ask questions about it.

HT5787 How do you get help with your security questions if you forget your answers?

How do you get help with your security questions if you forget your answers?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97108)

HT5699 The country I am living in is not on the Apple Contact Support list and I need help with my security questions.

I am currently living in Tunisia but it's not on the Apple Contact Support list. I need help with my security questions which I cannot remember the answers. There is no link to send a reset email. What do I do?

Click here and ask the iTunes Store staff for assistance.
(114040)

Flash live streaming encoder question

Does flash8 pro encode STREAMING video as VP6 or Sorenson?
Non live streaming is VP6, but there seems to be no
conclusive answer as to whether live streaming uses the same
encoder.
I guess not, otherwise something like on2 flix live would
have no reason to exist if you already own flash pro...

The answer was to go back to Wowza. Adobe dropped the ball.
RT
ashish gupta. <mailto:[email protected]>
December 15, 2014 at 3:44 AM
>
Live Streaming Basic Question
created by ashish gupta.
<https://forums.adobe.com/people/ashish+gupta.> in /Adobe Media
Server/ - View the full discussion
<https://forums.adobe.com/message/7015154#7015154>

Please can someone help, I have a question in my coursework that I don't know the answer to! Explain how PostScript fits into the design process?

Please can someone help, I have a question in my coursework that I don't know the answer to! Explain how PostScript fits into the design process?

The simple answer is that today PostScript really doesn't fit at all into the Graphic Design process, at least in terms of what the graphic designer needs to know.
Historically, though, the PostScript imaging model, first introduced circa 1984 provided the basis for the initial publishing software including PageMaker, Illustrator, QuarkXPress, and even Ventura Publisher. This imaging model included support for continuously scalable text, vector, and raster imagery as well as the concepts of a current transformation matrix that allowed arbitrary scaling, rotation, etc. and multiple color spaces (grayscale, RGB, CMYK, spot, device independent, and color-managed).
The PostScript imaging model was effectively replaced by the PDF imaging model, a significant superset of the PostScript imaging model, by the time Illustrator 9 and InDesign 2 were released in terms of support of ICC color management, transparency, etc.
The fact is that a good graphic designed doesn't need to know anything about PostScript or PDF per sé, but rather about the basics of color (such as issues associated with color gamut and what how that affects display and printing), use of text versus vector versus raster images and why one should keep content at the highest level of abstraction all the way to the rendering (or screen) or RIP process for printing. Some knowledge of typography also helps.
- Dov

I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set

I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set, so i can also not buy apps without entering my question awnsers please help

Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

HT201363 pls help to change security question, i don't remember

pls help to change security question, i don't remember
Tks
<Email Edited by Host>

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105126)

White Screen of Death Questions [PLEASE HELP!]

If someone actually cares about my issue, they will read all of the following. Let's see how many of you are out here and how many just want to answer simple short questions for reputation.
Okay, so I've ran into my first ever iPod Touch issue. I've never owned an iPhone, but I have had an iPod in the past and know a bit about them. I'm going to be 100% honest and I need a serious answer because I'm upset and angry. If anyone can be bothered to read the following, THANK YOU. If anyone could help me out in any way by giving me suggestions/tips and/or a solution, THANK YOU. But anything that can help is appreciated.
I had my board shorts on when this ocurred. I went to the toilet, doing my own business. I had my iPod Touch in my bank pocket which went to about half way down my thigh. The iPod Touch at the time was facing away from my thigh. Pulling down my pants, the iPod Touch hit the tiled floor. It hardly even hit the floor, all I heard was a little click and I realised it was my iPod. It was flat at the time, I picked it up and pressed the Home button immediately to ensure it was okay. It sort of lit up like a white background, but had a very low opacity. Since it was flat, I assumed it was normal.
Putting my iPod on charge right after my toilet break, I waited and waited for it to charge quickly enough for me to see the screen as I was a little worried not having seen that faded screen before. When the Apple logo was to appear, it gave me a lit up white screen. I was so confused as there were no marks AT ALL on my screen or any other part of the iPod.
NOTE: My iPod is still under warranty.
Did my research and came to the conclusion that it was the infamous 'White Screen of Death'. Where do I go from here? I have no clue!
I have important information such as a To Do list and my Contacts within the iPod. I NEED to retrieve this information. Is there any way I can do this?
I can still use the iPod, as if the screen were showing. Sounds are working, but there is just a blank, lit up white screen. Sometimes when I hold the Home button, On/Off button & the Volume Up buttoon all at the same time for ~10-20 seconds, the Apple logo comes up as if the screen was all fixed. 5 Seconds later, it goes all funny as if there were faded white lines and a faded white background but still being able to see the logo/screen. When the iPod loads, it just goes back to the lit up white screen.
Here's another odd thing to this, when I leave my iPod Touch sitting in a spot remotely, without touching it for a few hours, when I come back to it and hit the Home button, the iPod will begin to work fine as if nothing ever happened. No white screen, no nothing, just simply use it as I wish. I can even sometimes lock it, and then unclock it again with it still showing perfectly. However, when I tend to click the On/Off button after this happens, or if I just continue to use it for ~1 minute, it will eventually do the same as the above paragraph in second last sentence.
This may be important:
The iPod charges fine.
The iPod can be used with my computer and iTunes fine.
To sum it all up, everything can be done, including using the iPod, but with a lit up white screen.
Here are some questions I have for you guys:
Will Apple cover this in my warranty?
If they won't, what should I do?
How much would a replacement screen cost?
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
What could be the cause and why?
How can I retrieve that important information? (Contacts & To Do List)
Have you got any suggestions/tips for me?
I need this resolved guys. I'm very upset and angry over the whole situation. If a little thump on the tiles like that (it's not like I dropped it or anything) can damage the screen that much, then this devices from Apple can't be very reliable. All I'm asking for is some genuine service/help to resolve my issue. If this can be done, I will be one VERY happy person.
Daniel

Will Apple cover this in my warranty?
As stated above it is not covered by the warranty as it will be deemed accidental damage. You can try explaining what happened to somebody at the Genius Bar and they may cut you some slack and replace it at no cost. They might not though as Apple has started to really come down hard on eliminating replacing accidentally damaged iPods at no cost.
If they won't, what should I do?
Again, bring it into them anyways and explain what happened. You have nothing to lose either way. Otherwise, you really only have 2 other options. Send it to a third party service center to have them take a look at it and possibly repair the iPod, or do some studying online and learn how to open up the device yourself and take a look. There are some excellent step-by-step repair guides at http://www.ifixit.com/.
How much would a replacement screen cost?
This depends on where or how you have it repaired. Here is Apple's repair pricing guide.
http://www.apple.com/support/ipod/service/prices/
Third party repair centers will cost less and they'll actually swap out the bad part rather than just replace the entire iPod as Apple does.
Should I attempty to open my iPod if they do not cover it by warranty? (I have not attempted as I don't want to void anything).
If you have a warranty on it still, I wouldn't quite yet. Take it to your local Apple store as explained above. Otherwise, I would only if you feel comfortable working with small electronics and consider yourself handy with them.
What could be the cause and why?
As stated already, it could be a damaged or loose LCD ribbon cable or the LCD screen itself is damaged. As to what exact component, there is no way to tell.
How can I retrieve that important information? (Contacts & To Do List)
Make a backup of the device in iTunes before taking or sending it in for service or before you decide to open it up (if you do happen to go that route). See here what is included in the backup of the device.
iTunes: About iOS backups
If you get a new or replacement device you can restore it from that backup.
Have you got any suggestions/tips for me?
As I have already stated numerous times, try taking it into your local Apple Store and see if there is anything can do for you such as swap it out. Remember that they are not obligated to do so since the damage is technically accidental. Be kind and polite when explaning what happened. You never know what could happen!
B-rock

Live cache backup question

Hello Experts,
Iam new to Livecache and AP0 and was trying to understand the process of backups reason i need to perform complete SCM 7.0 systemcoopy . In past i have done system copies and well aware of the procedures .
Here it goes Presently we are on SCM 7.0
Question :--> I see our Livecache is installed on one machine and AP0 on another machine. Iam not aware how Livecache
                       was integrated with AP0.
                       Iam trying to understand how to take backup of livecache and then restore the same in Target.
In LC10
LCA --> ProblemAnalysis --> Logs --> DBA History
i can see that the live cache backups are in getting successfully everyday.
I see that Backup Label as DAT_000000<xxx> and Backup Template as bac214<xxx>.
Where can i see this Backup Template defined ( the path ) .
Can someone provide an insight regarding the live cache backups.
Checked SAP Note 457425 .
--> After system copy how would i integrate Livecache and AP0 .
Thanks in Advance.
Medha

Hello Medha,
1.
a)
Please review all recommended steps in the SAP note:
886103     System Landscape Copy for SAP SCM
when you are planning to do the SCM system copy.
For SAP liveCache documentation please see the SAP note 767598.
b)
SAP link:
SAP liveCache technology
-> Best Practices for Solution Management: mySAP SCM
review:
"Checklist for Recovery of SAP APO liveCache >= 7.4"
< It will be helpful to practice the steps of the document on the test liveCache instance first >
2.
Sessions: http://maxdb.sap.com/training/
=>
Session 2: Basic Administration with Database Studio
Session 3: CCMS Integration into the SAP System
Session 11: SAP MaxDB Backup and Recovery
Those sessions will help you. If you still have some questions after that => update the thread.
4.
Took classes for the MAXDB database administration or get the SAP consulting support.
Regards, Natalia Khlopina

HELP! Live or death question :(

Similar Messages

Maybe you are looking for