Help me for consolidation of multiple databases

Hi all Oracle Gurus,
I need some help, could anyone please help me in my problem?
Here is my problem,
I have three seperate Oarcle Databases installed on three different machine. I am in search of any tool or the way to get access all databases from one new machine where I can access all my three database simultaneously, consolidate as per my requirement.
Is there any tool available or is there any other mathod with the help of which I can do these.
Regards,
Paras
Edited by: user10761296 on May 7, 2009 12:36 PM

Hello,
I appreciate your reply.
Actually I am having three databases for three different modules which are interrelated. Now I have to generate report which requires data from all these data bases. All these reports are for the purpose of consolidation.
     So what I have to do is to get data from these databases consolidate and sometimes modify the respective databases if required. I don’t know where we have any tools or method available which can help me to achieve this.
Thanks again for replying.
Regards,
Paras.

Similar Messages

  • Pros and cons for using single/multiple database

    hi
    could anyone tell me in which senario we can use multiple databases and advantages and disadvantages using multiple databases over single database (with different tablespace)
    thaks in advance
    hari

    depending on your situation you can probably think of different answers. You ask for a 'general' rule of thumb... well, some things that pop into my mind:
    - different usage by applications. e.g. you have a transactional application storing and modifying data and you also want to do analytics. You might want to build a seperate database/datawarehouse that you can use for analytics. by splitting it up you can tune both databases to work best with the application using it.
    - sensitive data and many different users. e.g. the marketing department does not need to have access to the finance department's data (salaries, etc). give each department a separate database and only load the data needed/give access to the data needed.
    Just some thoughts, you can think of more when confronted with a certain situation.
    Lennert

  • Can you have multiple databases on the same LUN in Exchange 2010?

    I'm sure you can but is it possible with exchange 2010 to have multiple databases on the same LUN.  We currently have 8 DB's all writing to their own DB drive and separate log drive so 16 drives in total.  I need to spin a new DB up this week and
    wanted to double check this is possible.  I've looked online and cant find anything that I've seen before that says this is possible.
    Thanks.

    Hi,
    Yes, multiple databases could be placed on the same LUN, but it's not recommended.
    If you have 2 drives fail at the same time (it happens more than you think), then losing 100% of your DBs is a lot worse than losing one of them or some of them depending on where the failures are.
    Here is a similar thread for your reference:
    Multiple databases on the same LUN in Exchange 2010
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • RMAN backup multiple database on multiple hosts using recovery catalog

    I would like to know if I create one schema called "rman" is enough for repository for backing up multiple database on multiple machines using recovery catalog.
    Or is there any better way to handle for reporting peposes.
    Quick response is appreciated.
    OS Solairs9.
    Oracle 9i.
    Thanks.
    Srini

    This worked perfectly fine except for putting sbt in single quotes.
    See the reults below.
    You are just great Daljith.
    Thanks and I do appreciate your help.
    Still you did not answe my question.
    How come I see backups from June and May even though they are from
    diffierent catalog database?
    RMAN> allocate channel for maintenance device type 'sbt';
    allocated channel: ORA_MAINT_SBT_TAPE_1
    channel ORA_MAINT_SBT_TAPE_1: sid=9 devtype=SBT_TAPE
    channel ORA_MAINT_SBT_TAPE_1: VERITAS NetBackup for Oracle - Release 5.0GA (200)
    RMAN> crosscheck backup;
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_2_1_624018818 recid=1 stamp=624018818
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_1_1_624018817 recid=2 stamp=624018818
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_3_1_624019733 recid=3 stamp=624019733
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_5_1_624020641 recid=4 stamp=624020642
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_4_1_624020641 recid=5 stamp=624020642
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_6_1_624020677 recid=6 stamp=624020677
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_8_1_624115253 recid=7 stamp=624115253
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_7_1_624115252 recid=8 stamp=624115253
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_9_1_624116161 recid=9 stamp=624116161
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_11_1_624117067 recid=10 stamp=624117068
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_10_1_624117067 recid=11 stamp=624117068
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_13_1_624365687 recid=12 stamp=624365687
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_12_1_624365686 recid=13 stamp=624365687
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=bk_14_1_624366605 recid=14 stamp=624366605
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_16_1_624367501 recid=15 stamp=624367502
    crosschecked backup piece: found to be 'EXPIRED'
    backup piece handle=al_15_1_624367501 recid=16 stamp=624367502
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_22_1_628264333 recid=17 stamp=628264333
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_21_1_628264333 recid=18 stamp=628264333
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_23_1_628265249 recid=19 stamp=628265249
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-00 recid=20 stamp=628266151
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_26_1_628266195 recid=21 stamp=628266196
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_25_1_628266195 recid=22 stamp=628266196
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-01 recid=23 stamp=628266233
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_29_1_628267004 recid=24 stamp=628267004
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_28_1_628267004 recid=25 stamp=628267004
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=bk_30_1_628267919 recid=26 stamp=628267920
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-02 recid=27 stamp=628268832
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_32_1_628268875 recid=28 stamp=628268876
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=al_33_1_628268875 recid=29 stamp=628268876
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=c-2926506834-20070718-03 recid=30 stamp=628268913
    Crosschecked 30 objects
    RMAN> delete expired backup;
    List of Backup Pieces
    BP Key BS Key Pc# Cp# Status Device Type Piece Name
    11820 11804 1 1 EXPIRED SBT_TAPE bk_2_1_624018818
    11821 11805 1 1 EXPIRED SBT_TAPE bk_1_1_624018817
    11822 11806 1 1 EXPIRED SBT_TAPE bk_3_1_624019733
    11823 11807 1 1 EXPIRED SBT_TAPE al_5_1_624020641
    11824 11808 1 1 EXPIRED SBT_TAPE al_4_1_624020641
    11825 11809 1 1 EXPIRED SBT_TAPE al_6_1_624020677
    11826 11810 1 1 EXPIRED SBT_TAPE bk_8_1_624115253
    11827 11811 1 1 EXPIRED SBT_TAPE bk_7_1_624115252
    11828 11812 1 1 EXPIRED SBT_TAPE bk_9_1_624116161
    11829 11813 1 1 EXPIRED SBT_TAPE al_11_1_624117067
    11830 11814 1 1 EXPIRED SBT_TAPE al_10_1_624117067
    11831 11815 1 1 EXPIRED SBT_TAPE bk_13_1_624365687
    11832 11816 1 1 EXPIRED SBT_TAPE bk_12_1_624365686
    11833 11817 1 1 EXPIRED SBT_TAPE bk_14_1_624366605
    11834 11818 1 1 EXPIRED SBT_TAPE al_16_1_624367501
    11835 11819 1 1 EXPIRED SBT_TAPE al_15_1_624367501
    Do you really want to delete the above objects (enter YES or NO)? y
    deleted backup piece
    backup piece handle=bk_2_1_624018818 recid=1 stamp=624018818
    deleted backup piece
    backup piece handle=bk_1_1_624018817 recid=2 stamp=624018818
    deleted backup piece
    backup piece handle=bk_3_1_624019733 recid=3 stamp=624019733
    deleted backup piece
    backup piece handle=al_5_1_624020641 recid=4 stamp=624020642
    deleted backup piece
    backup piece handle=al_4_1_624020641 recid=5 stamp=624020642
    deleted backup piece
    backup piece handle=al_6_1_624020677 recid=6 stamp=624020677
    deleted backup piece
    backup piece handle=bk_8_1_624115253 recid=7 stamp=624115253
    deleted backup piece
    backup piece handle=bk_7_1_624115252 recid=8 stamp=624115253
    deleted backup piece
    backup piece handle=bk_9_1_624116161 recid=9 stamp=624116161
    deleted backup piece
    backup piece handle=al_11_1_624117067 recid=10 stamp=624117068
    deleted backup piece
    backup piece handle=al_10_1_624117067 recid=11 stamp=624117068
    deleted backup piece
    backup piece handle=bk_13_1_624365687 recid=12 stamp=624365687
    deleted backup piece
    backup piece handle=bk_12_1_624365686 recid=13 stamp=624365687
    deleted backup piece
    backup piece handle=bk_14_1_624366605 recid=14 stamp=624366605
    deleted backup piece
    backup piece handle=al_16_1_624367501 recid=15 stamp=624367502
    deleted backup piece
    backup piece handle=al_15_1_624367501 recid=16 stamp=624367502
    Deleted 16 EXPIRED objects
    RMAN> list backup summary;
    List of Backups
    ===============
    Key TY LV S Device Type Completion Time #Pieces #Copies Tag
    11895 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11896 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11897 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11916 B F A SBT_TAPE 18-JUL-07 1 1
    11926 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T142315
    11927 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T142315
    11935 B F A SBT_TAPE 18-JUL-07 1 1
    11939 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11940 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11941 B F A SBT_TAPE 18-JUL-07 1 1 HOT_DB_BK_LEVEL0
    11960 B F A SBT_TAPE 18-JUL-07 1 1
    11970 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T150755
    11971 B A A SBT_TAPE 18-JUL-07 1 1 TAG20070718T150755
    11977 B F A SBT_TAPE 18-JUL-07 1 1
    RMAN>
    Message was edited by:
    user539835

  • How to add multiple databases for a single frontend

    We have a project based on distributed databases and we have to workout on .Net framework.I want to know some information of connecting multiple databases for a single frontend and how can we access them.
    If so we have connected 2 databases for a single frontend in future if I want add one more database to it how it will be possible to do it without disturbing the current connectivity.
    Please help me in resolving this problem.
    Thanks......

    hi,
    what do you mean by connecting 2 databases? can you explain further?
    using entityframework you can connect to different databases
    public class CustomerContext : DbContext
    public ReportContext()
    : base("DefaultConnection")
    public DbSet<Customers> Customers { get; set; }
    and your connectionstring (config file)
    <connectionStrings>
    <add name="DefaultConnection" connectionString="Data Source=(LocalDB)\v11.0;AttachDbFilename=D:\\Database\Project.mdf;Integrated Security=True" providerName="System.Data.SqlClient" />
    </connectionStrings>
    you can add more connection strings on it.
    https://msdn.microsoft.com/en-us/library/vstudio/cc716756(v=vs.100).aspx
    https://msdn.microsoft.com/en-us/library/ms254978(v=vs.110).aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Use 1 listener for multiple database in a server

    hi guys,
    just want to check whether this is the right way to configure my Listener.ORA . I am using 1 listener.ora to listen for incoming request connection from remote client. There are multiple databases installed in a server.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ora03)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = O11R2)
    (ORACLE_HOME = /oracle/app/oracle/product/11.2.0/db_1)
    (SID_NAME = O11R2)
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = O10G)
    (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
    (SID_NAME = O10G)
    )sorry i am reading about it so did not install another database to test out. Just thinking in the line that it mention that the list of SID is refering to the multiple database that is installed in a server and i am using 1 listener.
    Please further advice.

    Shivananda Rao wrote:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ora03)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = O11R2)
    (ORACLE_HOME = /oracle/app/oracle/product/11.2.0/db_1)
    (SID_NAME = O11R2)
    (SID_DESC =
    (GLOBAL_DBNAME = O10G)
    (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
    (SID_NAME = O10G)
    )Please use as above. You can have one listener for multiple databases.right right so it the pattern goes like this:
    SID_LIST_LISTENER =
         (SID_LIST =
              (SID_DESC =
              (GLOBAL_DBNAME = AAAA)
              (ORACLE_HOME = /oracle/app/oracle/product/11.2.0/db_1)
              (SID_NAME = AAAA)
              (SID_DESC =
              (GLOBAL_DBNAME = BBBB)
              (ORACLE_HOME = /oracle/app/oracle/product/10.2.0/db_1)
              (SID_NAME = BBBB)
         )thanks !

  • Can I use Bridge CS6 as a central image database for linking to multiple documents?

    Can I use Bridge CS6 as a central image database for linking to multiple documents?

    It's only really good for Adobe document formats, if you want to be able to view and/or tag documents.

  • Error: ORA-16778: redo transport error for one or more databases.   please help.

    Hello everyone :
    I can't switchover to primary. following is error and information.
    RHEL 6.3 x86-64
    Oracle database 11.2.0.3.0 Enterprise edition
    Primary database = orclprmy
    Standby database = orclstby1
    ##### /etc/hosts on orclstby1
    [root@orclstby1 admin]# cat /etc/hosts
    127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
    ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
    192.168.50.211    ttprmy
    192.168.50.212    orclstby1
    ### DG broker error
    DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
    Copyright (c) 2000, 2009, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    Connected.
    DGMGRL> show configuration;
    Configuration - TTDGConfig1
      Protection Mode: MaxPerformance
      Databases:
        orclstby1 - Primary database
          Error: ORA-16778: redo transport error for one or more databases
        orclprmy  - Physical standby database
    Fast-Start Failover: DISABLED
    Configuration Status:
    ERROR
    DGMGRL>
    ########### listener.ora on orclstby1
    [root@orclstby1 admin]# cat listener.ora
    # listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME=orcl)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1_DGMGRL)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    ADR_BASE_LISTENER = /u2/oracle
    ############## tnsnames.ora on orclstby1
    ORCL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
    orclprmy =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
    orclprmy_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
    orclstby1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
    orclstby1_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
    ##### alert log on orclstby1.
    Fatal NI connect error 12504, connecting to:
    (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
      VERSION INFORMATION:
            TNS for Linux: Version 11.2.0.3.0 - Production
            TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
      Time: 06-SEP-2013 13:19:55
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12564
    TNS-12564: TNS:connection refused
        ns secondary err code: 0
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    There is problem  in alert log.
    In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
    Is any idea?
    Thanks for help.
    消息编辑者为：user4914135

    #### on primary database
    SQL>  select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
    LOG_ARCHIVE_DEST_2   VALID     REMOTE  LGWR       PENDING  ALL_LOGFILES    PRIMARY_ROLE orclstby1
    LOG_ARCHIVE_DEST_3   INACTIVE  LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
    #### on standby database
    SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
    LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING  ONLINE_LOGFILE  PRIMARY_ROLE orclprmy
    ORA-12504: TNS:listener was not given the SERVICE_NAME in
    CONNECT_DATA
    LOG_ARCHIVE_DEST_3   INACTIVE  PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE 
    ####  log_archive_dest on primary database  
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclprmy
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                     NOAFFIRM delay=0 optional comp
                                                     ression=disable max_failure=0
                                                     max_connections=1 reopen=300 d
                                                     b_unique_name="orclstby1" net_ti
                                                     meout=30, valid_for=(all_logfi
                                                     les,primary_role)
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    ####  log_archive_dest on standby database
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclstby1
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                     =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                      db_unique_name=orclprmy
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    log_archive_dest_23                  string
    log_archive_dest_24                  string
    log_archive_dest_25                  string
    #### spfile on standby database
    </u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
    orcl.__db_cache_size=1040187392
    orclstby1.__db_cache_size=1090519040
    orcl.__java_pool_size=16777216
    orclstby1.__java_pool_size=16777216
    orcl.__large_pool_size=16777216
    orclstby1.__large_pool_size=16777216
    orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=536870912
    orclstby1.__pga_aggregate_target=536870912
    orcl.__sga_target=1610612736
    orclstby1.__sga_target=161061273
    orcl.__shared_io_pool_size=0
    orclstby1.__shared_io_pool_size=0
    orcl.__shared_pool_size=503316480
    orclstby1.__shared_pool_size=469762048
    orcl.__streams_pool_size=16777216
    orclstby1.__streams_pool_size=0
    *.archive_lag_target=0
    *.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_nam
    e_convert='orcl','orclstby1'
    *.db_name='orcl'
    *.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
    *.db_recovery_file_dest_size=5218762752
    *.db_unique_name='orclstby1'
    *.deferred_segment_creation=FALSE
    *.dg_broker_start=TRUE
    *.diagnostic_dest='/u2/oracle'
    *.fal_client='orclstby1'
    *.fal_server='orclprmy'
    *.log_archive_config='dg_config=(orclprmy,orclstby1)'
    *.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
    *.log_archive_dest_2='ser
    vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
    *.log_archive_dest_state_2='ENABLE'
    orcl.log_archive_format='orcl_%t_%s_%r.arc'
    *.log_archive_format='orclstby1_%t_%s_%r.arc'
    orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
    *.log_archive_max_processes=4
    *.log_archive_min_succeed_dest=1
    orcl.log_archive_trace=0
    orclstby1.log_archive_trace=0
    *.log_file_name_convert='orcl','orclstby1'
    *.open_cursors=300
    *.pga_aggregate_target=536870912
    *.processes=
    1500
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sessions=1655
    *.sga_target=1610612736
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    </u2/oracle/product/11.2.0/dbhome_1/dbs>
    Thank you for your help.

  • Multiple Keyword Sets (For Multiple Databases)

    I work with several different Lightroom databases and it would be nice to be able to have separate sets of keywords that go with each database.
    In my specific case, I use one database for my personal photographic endeavors and another for an image library for our church. The keywords tags used for my Nature photography images and the tags used for the event photography shots for church are very different. Hence, there are lots of keywords in both libraries that have zero images attached to them.
    It would be very useful in you could allow multiple keyword sets to track with multiple databases.
    Dave Mayfield

    There issues'Purge unused Keywords' option under Menu/Metadata.
    Don't ya know.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Discoverer Reporting Solution for Multiple Databases

    I have to build oracle discoverer reports (single point of access) for four different applications. Each application is having separate databases. So whether i should create separate EULs for each applications (in respective databases) or Should i create a single EUL in any one of the databases and then use db links to connect rermaining databases (for reports from the other applications).
    Can u suggest me which method will work good if you see the performace?. I need a dingle point of access for all the discoverer reports.
    The worksheets need to be deployed with oracle portal for access of reports in a single click. Is there any way to pre configure the db credentila for each worksheet...?

    Hi
    My replies below make the assumption that you are not allowed to do any ETL and therefore the data from each database has to be pulled as is. If you do have ETL capability the situation changes dramatically.
    In addition to what Sharon has said the cost based optimiizer will have a difficult job rewriting your query efficiently if you use database links, and if you attempt to have queries with some tables from one database and some from another the optimizer will not work at all. I mean. How could it? How could the optimzier in database A know anything about the statistics in databases B, C or D? Wherever the EUL is, that is where the driving optimizer will be so choose wisely obi-wan :-)
    For me it's more about user needs than IT needs. If the business has a need to combine data from multiple databases then having a single EUL with database links would be a necessity. However, if they really are disparate systems with nothing in common such as say having Peoplesoft HR in one and E-Busines Suite Inventory in another with perhaps an in-house tracking system in another then I would look at having separate EULs, one in each.
    Having one EUL across non-related systems means you have to mix users and roles and can be hard to manage. It actually becomes messy when just two databases are involved never mind four. So even though you might think it is more difficult to maintain 4 EULs, if the objects really are different and you have differing roles and usernames it actually will probably be simpler. They will be simpler to backup, simpler for exporting and importing and it will be faster for Discoverer to maintain workbooks as there will be fewer of them. Plus your system will have access to its local optimzier thereby ensuring the SQL is efficient.
    If you are going to use one EUL you need to start out on a sound foundation. This means using libraries to control access too business areas and workbooks. You'll need to adopt some simple naming standards to keep things separate and manageable. I wrote a paper about libraries a few years ago and it is available free of change here on my website: http://ascbi.com/downloads.htm. The paper is called Discoverer Libraries - a Concept.
    Best wiishes
    Michael

  • [ask] Multiple database for a user

    Hi,
    pardon for my very basic question since i'm new in database world. Currently I've been playing with XE and I cannot find a complete documentation on the subject, therefore I venture myself to ask some basic tasks of XE, such as:
    1. Can a user have multiple database (or schema) or only 1?
    2. If it can have multiple database, how can them be viewed?
    3. How can I delete one of them if no 1 is true?
    4. How can I delete a table?
    5. Where can I find a thorough documentation on XE besides tutorial?
    Best Regards,
    Joe

    user11357901 wrote:
    Hi,
    pardon for my very basic question since i'm new in database world. Currently I've been playing with XE and I cannot find a complete documentation on the subject, therefore I venture myself to ask some basic tasks of XE, such as:
    1. Can a user have multiple database (or schema) or only 1?User infact IS a schema , and so schema IS user. They don't own the database;they belong to only one database,although they could
    perform some actions on other databases
    2. If it can have multiple database, how can them be viewed?You can access objects on remote database B with the user from database A by using database links
    3. How can I delete one of them if no 1 is true?N/A
    4. How can I delete a table?If using SQL, then DROP command is the one you want. DELETE command is used to delete row/s from a table, not to delete table
    5. Where can I find a thorough documentation on XE besides tutorial?oracle.tahiti.com would be the best choice
    >
    Best Regards,cheers

  • How do you run CalcMgrCmdLineLauncher.cmd for a ruleset that runs rules in multiple databases?

    Hi all,
    Just having recently upgraded to 11.1.2.2, I'm just trying to update our batch files to automate the running of some business rulesets using CalcMgrCmdLineLauncher.cmd. I can get business rules working ok, and rulesets that only run rules within the same database working, but I can't seem to get the rulesets running where the rules are running against multiple databases.
    I know the syntax is CalcMgrCmdLineLauncher.cmd -f:%PWD% /A:%PlanAPP% /U:%RUNUSR% /D:%EssbCapexDB% /S:%BR%
    but for the /D: argument, putting one of the databases in there doesnt work.
    The batch runs, it even says its successful in the log but its too quick and looking at the job console it didnt run.
    I can run the ruleset manually no problems.
    Anyone know how to fix this?
    Thanks

    One stated to "search cmd, right click, and run as admininstrator" but where is this?
    In the search field in your Vista start menu, type cmd
    Next, right-click on the cmd that comes up and select "Run as administrator".

  • Can iDSIE (Meta-directory) be used as a single authentication point from iPlanet Web Server for multiple databases using direct "or" indirect connectors?

    Basically, the latest release of iPlanet Web Server forces the user/group information source to be an LDAP database. Currently, the user accounts are in Active Directory, NT, Oracle and NetWare Directory Service in this heterogeneous environment.
    What I am looking for is a meta-directory product which can do two things:
    1-Single authentiation point for users in mulitple databases from iPlanet Web Server.
    2-Single administration point for all of the databases listed above.
    For example, can I add/modify/delete a user account at the meta-directory level and have this propagate to all of the databases listed above reducing the administration to one meta-directory product?

    With an Virtual Directory solution, you can authenticate Iplanet Web Server against nearly anything including any LDAPv3 Directory Server, Microsoft Active Directory, Windows NT Domains, Oracle RDBMS, IBM DB2 RDBMS, Microsoft SQL, and others.
    All of this is done dynamically and doesn't require any heavyweight synchronization process. The Virtual Directory acts as a dynamic schema / DIT / data translation engine for different types of repositories.
    OctetString's Virtual Directory Engine is one such example. You can download a 30 day evaluation copy at:
    http://www.octetstring.com
    It will take you all of 30 minutes to get iPlanet Web Server authenticated against and using groups from things like Oracle RDBMS, Windows NT Domains, or Active Directory.

  • RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP

    First question.
    Can primary and standby database have the same SID name?
    As I recall it is yes.
    I believe they must have different GLOBAL or DB_UNIQUE_NAME?
    Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
    Permissions Issue on STANDBY machine?
    RMAN> connect target backup_admin/backup_admin
    connected to target database: LABDG (DBID=1973403623)
    RMAN> connect auxiliary sys/oracle@STANDBY;
    connected to auxiliary database: LABDG (not mounted)
    RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
    Starting Duplicate Db at 18-JUL-11
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=10 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
    '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
    executing Memory Script
    Starting backup at 18-JUL-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=151 device type=DISK
    Finished backup at 18-JUL-11
    contents of Memory Script:
    backup as copy current controlfile for standby auxiliary format '/u01/oradat
    restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
    '/u01/oradata/LABDG/control01.ctl';
    executing Memory Script
    Starting backup at 18-JUL-11
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting datafile copy
    copying standby control file
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
    ORA-17628: Oracle error 19505 returned by remote Oracle server

    Hi,
    Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
    From the documentation.
    The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
    create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
    http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
    Rgds,
    Tycho

  • Multiple databases in one file: a small snafu

    Hello everyone,
    Opening multiple databases in a single file is an administrative convenience. It is well explained in the manual (see db/docs/ref/am/opensub.html). Normally, there is little difference between databases in their own physical files or grouped together in a single physical file. There is one small sentence in the manual that says the following:
    (begin fragment)
    However, since multiple databases in a file exist in a single physical file, opening two databases in the same file simultaneously requires locking be enabled unless all of the handles are read-only. As the locks for the two databases can only conflict during page allocation, this additional locking is unlikely to affect performance.
    (end fragment).
    I didn't pay attention to it, except the "unlikely to affect performance" part which told me that I wasn't to worry about it. The sun was shining. Life was good.
    And I was wrong. It was one of those "epic bug quests" I had to embark on, only to realise that it may not be a BDB bug, but my carelessnes. Nevertheless, I'm left with an uneasy feeling which I would like to explain here.
    Consider BDB configured as a concurrent data store.
    There are 2 threads. The first thread has the following pseudocode:
    cursor1 = db1->cursor(...)
    while(cursor1->c_get(... DB_NEXT...))
    // 1
    cursor2 = db2->cursor(...)
    while(cursor2->c_get(... DB_NEXT...))
    The second thread does only the following:
    db3->put(...)
    db1, db2 and db3 are all distinct databases. All cursors are read-only (the cursor implicitly used in db3->put is of course a write cursor).
    While the first thread is running, the second thread executes db3->put(...) at "//1".
    Question: what happens?
    Answer 1: if db1, db2 and db3 reside in different physical files, nothing special happens. Everything proceeds as it should.
    Answer 2: if db1, db2 and db3 reside in the same physical file, both threads block "sometimes".
    The "sometimes" used here means "when the put operation in thread 2 needs to allocate a new page".
    Reading the BDB source code is extraordinarily difficult (which says more about my limitations than about the clarity of the code) but here is what happens, as far as I could determine:
    (thread 1) cursor1 needs and acquires a read lock on db1
    (thread 2) db3->put needs a write lock on db2 to allocate a new page. Since db2 is in the same physical file as db1 and thread 1 already has a read lock, thread 2 waits until the read lock is released. Thread 2 blocks.
    (thread 1) cursor 2 needs a read lock on db3. For some reason, BDB detects that the another thread is waiting for a write lock on the physical file, and thread 1 blocks.
    Both threads block waiting on each other to complete.
    I suppose the system is the way it is to avoid starvation, but there you have it: be careful when you're lumping together multiple databases in one file!
    Anyone who can clarify or confirm this is welcome.
    Vincent

    I had experienced a similar problem. I run multiple process. Each one of them starts a transaction that does db->put and db->pget to its own database (which also has a secondary index). When each database is in a separate physical file there is no problem but when I put all databases in a single file the processes start to dead-lock.
    The following combination of options solved the deadlocking problem:
    - use serializable isolation level instead of snapshot, i.e. do not pass DB_TXN_SNAPSHOT to txn_begin
    - do not pass the DB_NO_WAIT option to txn_begin
    - use Btree instead of a Hash
    Hope that helps.

Maybe you are looking for