Help me out in developing LC application

I am beginner to this technology , and It will be great if somebody can drive me on how to complete a livecycle application.
I have read much about this LC and, I know, we have LC Designer or LC Workebench designer perspective to design our forms and process perspective to create workflow.
I have LC installed in my machine and now, i would like to develop an application based on the below use case.Kindly help me out to reach this objective.
Summary of Use case:
An employee fills up (online or offline whichever is suitable for him/her) and sends an Expense Reimbursement Form to his/her Head of Department (HOD) for approval. Employee can also use Adobe Livecycle Workspace to fill up the said form. HOD has rights to approve or reject the said form. In case of rejection, employee will be notified through email. If HOD approves the form, it then redirects to Accounts Department for reimbursement. After the operations of Accounts Department like valuation of expense etc., the form then redirects to Administration Department for further processing like cheque no. entry etc. Finally, employee will be notified through email to collect his/her cheque from concerned department.
Looking forward for valuable suggestions and guidance on how to develop this application(a kind of step by step walkthrough).
Thanks,
Vinod Chattergee.S

There is an end-to-end tutorial that is available at http://www.adobe.com/go/learn_lc_firstApplication_82 that steps you through creating an application. The scenario in the tutorial shows you how to create a form design and a process where users interact with it in Workspace ES. You will also need to download the assets require to step through the tutorial located at http://www.adobe.com/go/learn_lc_firstApplicationZip_82. Go to the provided URLs to get the most updated versions.or
To start this tutorial, it is recommended that you install a JBoss Turnkey installation of LiveCycle ES Update1 (server) and Workbench ES. I presume you have done this, but if you require more information, please let me know and I'll provide more information.
Hope that helps!
...Gil

Similar Messages

Hi..do help me out in this Cross Applications scenarios

hi guys,
thanx for all of you for helping me out last time..i hope u all will be helping me out again in this regard even....i ould like to know about
1) Distribution Scenarios
2) Inbound and Outbound process
3) Reference model
4) Distribution of Customer model...
Do help me out in knowing all these presently....
thanx in advance....
regards
kalpana

Hi melvin victor,
Welcome to the Support Communities!
The information below may help you troubleshoot your iPhone battery issue:
iPhone Battery and Power - Apple Support
http://www.apple.com/support/iphone/repair/battery-power/
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
I hope this information helps ....
- Judy

I have written employee data code in C#..which has add,delete n display employee data...i have written for add...could u pls help me out to develope delete,display code

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace Employee_data
class Employee
public string ename { set; get; }
public string edpt { set; get; }
public int eno { set; get; }
class Program
int index = 0, menu;
Employee[] emps = new Employee[100];
public Program()
while (true)
Console.WriteLine("1.Add Employee");
Console.WriteLine("2.Delete Employee");
Console.WriteLine("3.Dispaly Employee");
Console.WriteLine("Enter your option:");
menu = Convert.ToInt32(Console.ReadLine());
switch (menu)
case 1:
Console.WriteLine("Add Employee");
Console.WriteLine("Enter Employee name:");
string ename = Console.ReadLine();
Console.WriteLine("Enter department name:");
string edpt = Console.ReadLine();
Console.WriteLine("Enter employee id:");
int eno = Convert.ToInt32(Console.ReadLine());
Employee e = new Employee();
e.ename = ename; e.edpt = edpt; e.eno = eno;
emps[index] = e;
int i = 1;
foreach (Employee e1 in emps)
if (e1 != null)
Console.WriteLine("----------------------------------");
Console.WriteLine("Sno: {0}", i); i++;
Console.WriteLine("Employee Name: {0}", e1.ename);
Console.WriteLine("Employee Department: {0}", e1.edpt);
Console.WriteLine("Employee Number: {0}", e1.eno);
Console.WriteLine("----------------------------------");
index++;
break;
case 2:
Console.WriteLine("Delete Employee");
break;
case 3:
Console.WriteLine("Display Employee");
foreach (Employee e1 in emps)
if (e1 != null)
Console.WriteLine("----------------------------------");
Console.WriteLine("Sno: {0}", i); i++;
Console.WriteLine("Employee Name: {0}", e1.ename);
Console.WriteLine("Employee Department: {0}", e1.edpt);
Console.WriteLine("Employee Number: {0}", e1.eno);
Console.WriteLine("----------------------------------");
index++;
break;
//default:
// Console.WriteLine("Exit");
// break;
public void addemply(string name, string dpt, int num)
//emps[0] = "kotesh";
//emps[1] = "IT";
//emps[2] = "31";
public void delemply(string name, string dpt, int num)
public void display()
static void Main(string[] args)
new Program();
Console.ReadLine();

Hello,
Please do not post requirement as helping develop a function or an application, this forum is used to discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools. You can attempt to do it yourself and if you meet some
question, you can post it to here.
For the requirement, it is beyond the scope of our support.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Search Help in ITS Custom Development

Hello Gurus,
I need your help, please.
I develop an application and its IAC templates for internal ITS.
Everything works fine, except the Search Help.
I wonder how can I put a button next to a field, where he appeared to load a search help for the field. This search should help such an IAC. Do i need to develop a IAC to the search help and then call the screen when i push the button? Or are another way to do this?
Thanks for you help
Best Regards.
Paulo

Hi Klaus,
I tried with the code
`searchhelp(~fieldname=u201CEXT_SEARCH-ZINSPECTORu201C)`
, but don't work. When i try to open the template, show me a error telling that:
Erro interno 0x2103: Interpreter: The input contains errors.
I'm using SRM 4.0 with integrated ITS.
Thanks in advanced.
Best regards.

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

Need help in developing mobile application?

Hi all,
I am learning how to develop mobile applications in Jdeveloper environment. I have been searching a lot in google but unable to come to a conclusion on the way in which I could get this.
Kindly post some links where I can get some documents on this and I need to develop a mobile application which should be able to render in almost all the mobile platfoms so far I have gone through
the links where the applications can be rendered only in some selected mobiles like blackberry. so Kindly help me in searching for the best possible options.
Thanks,
Phanindra.

Hi,
Check following will useful
http://www.oracle.com/technetwork/developer-tools/adf/overview/adf-mobile-096323.html
http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/mobile/mobile.htm

Hi all I am from India,I purchased whatsapp application on14th July for Rs.55 but they charged me Rs.60 for that and also yesterday again they charged Rs.55 for the same app..what should I do??Please help me out guys..

Hi all I am from India,I purchased whatsapp application on14th July for Rs.55 but they charged me Rs.60 for that and also yesterday again they charged Rs.55 for the same app..what should I do??Please help me out guys..

Have you added or changed your credit card details on your iTunes account ? If you have then each time that you do so a small temporary store holding charge (the Rs 60) may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702
For the second charge for 55, you used the same account to re-download the app ? If you did then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Help me in developing an application

hi frnds,
I have to develop an application similar to flexstore.But i
am confused with "states" and how to integrate other mxml to the
main mxml.Will you help me in this.Pls give a tutorial.
regards

Usually you use view states for cases where a rather smaller
portion of your application needs to change appearance for some
specific purpose, and then often use ViewStack for app navigation
between components:
Here is a sample app I created to show using ViewStack for an
entire website:
------------------------- ViewStack1.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns:comp="components.*"
layout="vertical" width="100%" height="100%" >
<comp:TopBar />
<mx:HBox width="100%" height="100%">
<comp:LeftBar />
<mx:VBox width="100%" height="100%">
<mx:ViewStack id="myViewStack" borderStyle="none"
width="100%" height="100%">
<mx:VBox id="home" width="100%">
<comp:MainIntroText />
<mx:HRule width="50%" height="3"
strokeColor="0xCC3333"/>
<comp:MainSecondaryText />
<mx:HRule width="50%" height="3"
strokeColor="0xCC3333"/>
<comp:MainFinalText />
</mx:VBox>
<mx:VBox id="about" width="100%">
<comp:About />
</mx:VBox>
<mx:VBox id="contact" width="100%">
<comp:Contact />
</mx:VBox>
</mx:ViewStack>
</mx:VBox>
</mx:HBox>
</mx:Application>
------------------------------- About.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%">
<mx:VBox width="65%">
<mx:Text fontSize="14" width="100%" text="This page tells
you about us." />
</mx:VBox>
</mx:HBox>
----------------------------------- Contact.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%">
<mx:VBox width="65%">
<mx:Text fontSize="14" width="100%" text="This page tells
you how to contact us." />
</mx:VBox>
</mx:HBox>
------------------- LeftBar.mxml -------------------------
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="200" height="100%">
<mx:LinkButton label="Adobe Labs - Flex"
click="navigateToURL(new URLRequest('
http://labs.adobe.com/technologies/flex'),
'_blank');"/>
<mx:Spacer height="20"/>
<mx:Label fontSize="16" text="Flex Blogs"/>
<mx:LinkBar direction="vertical" width="90%"
itemClick="navigateToURL(new URLRequest(event.item.data),
'_blank');">
<mx:Object label="Adobe Flex Team Blog" data="
http://weblogs.macromedia.com/flexteam/"/>
<mx:Object label="Flex Blog Aggregator" data="
http://www.allyourflexarebelongtous.com/"/>
<mx:Object label="Adobe Flex Blog Aggregator" data="
http://weblogs.macromedia.com/mxna/index.cfm?query=byCategory&categoryId=5&categor yName=Flex"/>
</mx:LinkBar>
<mx:Spacer height="20"/>
<mx:Label fontSize="16" text="Example Flex Apps"/>
<mx:LinkBar direction="vertical" id="addlRscList"
width="90%" itemClick="navigateToURL(new
URLRequest(event.item.data), '_blank');">
<mx:Object label="Adobe Flex Store" data="
http://www.adobe.com/devnet/flex/samples/flex_store_v2/"/>
<mx:Object label="Adobe Dashboard Example" data="
http://examples.adobe.com/flex2/inproduct/sdk/dashboard/dashboard.html"/>
<mx:Object label="Buzzword Word Processor" data="
http://preview.getbuzzword.com/?s=true"/>
<mx:Object label="Adobe Style Explorer" data="
http://examples.adobe.com/flex2/consulting/styleexplorer/Flex2StyleExplorer.html"/>
<mx:Object label="Adobe Component Explorer" data="
http://examples.adobe.com/flex2/inproduct/sdk/explorer/explorer.html"/>
</mx:LinkBar>
</mx:VBox>
----------------------- MainFinalText.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%">
<mx:Text width="100%" fontSize="12"
text="Here is the final text I want to show you." />
</mx:VBox>
--------------------------- MainIntroText.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%">
<mx:Text width="100%" fontSize="12"
text="Here is the main text I want to show you." />
</mx:VBox>
----------------------- MainSecondaryText.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%">
<mx:Text width="100%" fontSize="12"
text="Here is the secondary text I want to show you." />
</mx:VBox>
--------------- TopBar.mxml --------------------------------
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="
http://www.adobe.com/2006/mxml"
width="100%">
<mx:Script>
<![CDATA[
private function goToViews(view:String):void {
if(view == "home"){
this.parentApplication.myViewStack.selectedChild=this.parentApplication.home;
if(view == "about"){
this.parentApplication.myViewStack.selectedChild=this.parentApplication.about;
if(view == "contact"){
this.parentApplication.myViewStack.selectedChild=this.parentApplication.contact;
]]>
</mx:Script>
<mx:LinkButton label="MySnazzyLogo" fontSize="20"
click="goToViews('home');" />
<mx:VBox width="100%">
<mx:HBox width="100%">
<mx:Spacer width="100%" />
<mx:LinkBar fontSize="14"
itemClick="goToViews(String(event.item.data));">
<mx:Array>
<mx:Object label="About Us" data="about"/>
<mx:Object label="Contact Us" data="contact"/>
</mx:Array>
</mx:LinkBar>
</mx:HBox>
<mx:HBox width="100%">
<mx:Spacer width="150" />
<mx:Label fontSize="25" text="Here is Some Additional
Text" />
</mx:HBox>
</mx:VBox>
</mx:HBox>

Help in developing Composite application in Oracle SOA suite

Hi,
I am new to Oracle SOA suite and I would like to start developing composite applications in Windows machine.Please help me understand what all things I should install in my machine to make it work - Development till deploying the application.
Thanks in advance.

Hi,
For installation and relevant links:
http://ariklalo.wordpress.com/2012/05/26/oracle-soa-suite-11gr1-installation/
For configuration (if needed and wanted):
http://docs.oracle.com/cd/E17904_01/integration.1111/e10226/bp_config.htm
For JCA/All adapters User's Guide:
http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/partpage1.htm
For examples bpel:
http://java.net/projects/oraclesoasuite11g/pages/BPEL
Arik

HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

Hi melvin victor,
Welcome to the Support Communities!
The information below may help you troubleshoot your iPhone battery issue:
iPhone Battery and Power - Apple Support
http://www.apple.com/support/iphone/repair/battery-power/
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
I hope this information helps ....
- Judy

Installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

installed itunes, checked in, I try to download free applications out the window: this Apple ID has not yet been used with the iTunes Store. But the mail I receive, that I'm registered, and I have an Apple ID, please help find out!

Diana,
This could be a delay while internal service records were updated. Check it out again - is it okay for now?

Help needed 4 developing an application

Hello ppl ,
i am new to this community but have developed some apps in J2ME.Recently i got an idea of developing an application by which i can connect my mobile device to the computer(pc) using bluetooth.And i can control my pc with the mobile device and actually see the whole GUI of the pc on my mobile device.so that i dont need to sit on the pc again & again.
I have heard that there are softwares that are used by administrators for viewing the desktop of their hosts and also control to them through lan,so i want to develop the same thing for the mobile also.
Can anyone tell me if this is possible or not on J2ME platform.i know its very restricted but if this is possible then what platform should u think i should go for.
And also tell me how to setup a lan using bluetooth b/w my pc & mobile device.Like what APIs r there for doing so and what books/tutorials i should refer 2.
Thanks
(Need sincere replys )

This is not the best place for open ended questions like this.
Try looking at how OSS versions do this (argouml for example).

Need help regarding develpment of a chat application in java

hi
well, i would like to know what is the best and simple technolgy to develop a simple chat application. I was searching this on internet and found some using servlets and JSP's, applets, RMI etc. I dont know exactly which to use. Infact iam new to java and if someone can help me out with this, i can start reading the specific technology.
Thanks in advance.
ravi.

follow this tutorial and you might get some clues: http://java.sun.com/docs/books/tutorial/networking/sockets/index.html

Help me out to run Interactive forms in CE7.1

Hi experts,
I am new to this SAP webdynPro for java World.Can you please help me to run interactive Forms.
I have installed CE7.1 Dev_studio and J2EEServer.To Develop Adobe Interactive Forms i have installed Adobe Designer7.1.
When i run the Application i am getting following exception.
com.sap.engine.services.webservices.espbase.discovery.TargetNotMappedException: Logical Target ConfigPort_Document not mapped to a physical system.
    at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getDSTTemplateForSystem(DestinationsHelperImpl.java:894)
    at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getWSDLUrl(DestinationsHelperImpl.java:397)
    at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.getWSDLUrl(GenericServiceFactory.java:222)
    at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:187)
    at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:175)
Full exception Chain is
com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Interactive Form Operation Failed
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:633)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:940)
     at com.sap.tc.webdynpro.clientserver.phases.RespondPhase.execute(RespondPhase.java:60)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1388)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1208)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:145)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:80)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:457)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:248)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:698)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:230)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:228)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:192)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process RenderRequest...
     at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
     at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:89)
     at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:112)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:567)
     ... 61 more
Caused by: com.sap.tc.adobe.pdfobject.core.PDFObjectRuntimeException: Logical Target ConfigPort_Document not mapped to a physical system.
     at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:349)
     at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.doSoapCall(PDFObjectDII.java:81)
     at com.sap.tc.adobe.pdfobject.core.PDFObject.render(PDFObject.java:3610)
     at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:152)
     at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
     ... 64 more
Caused by: com.sap.engine.services.webservices.espbase.discovery.TargetNotMappedException: Logical Target ConfigPort_Document not mapped to a physical system.
     at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getDSTTemplateForSystem(DestinationsHelperImpl.java:894)
     at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getWSDLUrl(DestinationsHelperImpl.java:397)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.getWSDLUrl(GenericServiceFactory.java:222)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:187)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:175)
     at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:160)
     at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:278)
     ... 68 more
Can anybody please help me out from this Issue.
Do we need any configuration in J2EE server to Develop interactive forms .
if we need configuration can you please send the Detail steps to configure.
Thanks and Regards,
Shashikiran.b

Hi,
I created folder structure manually as mentioned in the Document and placed that .pfx file there..
But in NWA configuration if i try to configure as mentioned in Document i am getting this msg in right pane.
1. Navigate to http://:/nwa to start the SAP NetWeaver Administrator.
Note
is the AS Java where the Adobe document services are installed and is the HTTP port of the AS Java.
2. Choose Configuration Management ® Infrastructure Management ® Adobe Document Services
3. Choose Configuration in the left pane.
in right pane i am getting following message.....
There are no Adobe document services running on the selected system
If i run application i am getting following error on browser.
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (500) Internal Server Error. The requested URL was:"http://Shashikiran_B.spanservices.com:50000/inspection.wsil/, used user to connect: ADSUSER"
    at com.sap.esi.esp.service.server.query.discovery.WSTransportSettingsResolver.resolveEntity(WSTransportSettingsResolver.java:366)
    at com.sap.esi.esp.service.server.query.discovery.WSTransportSettingsResolver.resolveEntity(WSTransportSettingsResolver.java:354)
    at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.initialize(WSQueryImpl.java:281)
    at com.sap.engine.services.webservices.espbase.query.WSQueryImpl.findWSEndpoints(WSQueryImpl.java:165)
    at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getEndpointConfigurations(DestinationsHelperImpl.java:924)

I can't update my flash player and i might have a virus help me out with any advice on getting my mac on track ?

i can't update my flash player and i might have a virus help me out with any advice on getting my mac on track ?

You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Help me out in developing LC application

Similar Messages

Maybe you are looking for