Help me stop Safari showing souce code for all pages

Safari has been doing this for all pages including apple.com
The only change to the system was the new combo update. Now I'm using Firefox. Can someone give me a reason to go back to Safari?

I better add that this also affects any of the help windows for other products. Many times I just get a long line of the different help topics without formatting. It is very annoying that i cannot read the Hlep menus properly. Can anyone help me please?

Similar Messages

Display address omitted postal code for all countries in sapscript

Hi everyone
Does anyone know how to omit the postal code for all countries(eg. US ) when displaying address in sapscript form?
I want to avoid to display postal code even the country is US.
coz my firm doesn't want to show postal code.....
Also, how to use combination keys of PRIORITY parameter?
For example, if i want PRIORITY '1' 'S' 'L' 'N' 'C'
I cannot write like this as following....
/: ADDRESS DELIVERY PARAGRAPH AS PRIORITY 1 S L N C LINES 5
/: ADDRESSNUMBER &VBDKR-ADRNR_WE(K)&
/: FROMCOUNTRY &VBDKR-SLAND&
/: ENDADDRESS

Hi,
Bold text describes the usage of Priority.
ADDRESS: Formatting of addresses
The command ADDRESS - ENDADDRESS formats an address according to the postal standards of the
destination country defined in the parameter COUNTRY. The reference fields are described in the
structure ADRS. Both constants and symbols can be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: STREET street
/: POBOX PO box [CODE zip code]
/: POSTCODE zip code
/: CITY town1[,town2]
/: REGION region
/: COUNTRY country
/: FROMCOUNTRY from country
/: ENDADDRESS
Both formatting data and address data are given as parameters. Address data is formatted for output in accordance with the parameters COUNTRY, PRIORITY and LINES. If available, the P.O. box is used instead of the street as the default.
DELIVERY: Defines the street address. If this parameter is selected, the system prints the street address on the layout output instead of the P.O. box.
PARAGRAPH: Defines in which paragraph format the address is output. If the parameter is not defined, the address is output in the default paragraph format.
PRIORITY: Defines which address lines can be omitted if necessary. You can enter a combination of the following values:
A form of address
P mandatory blank line 1
Q mandatory blank line 2
2 name2
3 name3
4 name4
L name of country
S line for the street
O line for the city

LINES: Defines how many lines are available for formatting the address. If all the address data cannot be formatted due to an insufficient number of lines, the data entered in the parameter PRIORITY is omitted. If the LINES specification is missing and this command is in a layout set window whose type is not MAIN, the lines available for the address layout are then calculated automatically by means of the current output line item and window size.
TITLE: Required form of address.
NAME: Up to four separate names, separated by commas, can be defined.
STREET: Street specification including address number.
POBOX: Post Office box number.
CODE: P.O. box Postal or ZIP code if it is different from the postal code of the city.
POSTCODE: Postal or ZIP code of the city.
CITY: Up to two place names can be defined.
REGION: Determines the administrative area.
COUNTRY: Specifies the country according to whose specific postal standards the address is formatted.
FROMCOUNTRY: Defines in which language the name of the destination country is formatted. In EC countries, only the international country identification letter is put before the postal code with a hyphen.
Example:
/: ADDRESS
/: TITLE Company
/: NAME Widget Technology, Inc., All Kind of Widgets
/: STREET 1005 Lido Lane
/: POBOX 2935 CODE 94400
/: POSTCODE 94404
/: CITY Foster City
/: REGION CA
/: COUNTRY USA
/: FROMCOUNTRY USA
/: ENDADDRESS
Generates the following address:
Company
Widget Technology, Inc.
All Kind of Widgets
PO box 2935
Foster City, CA 94400
If the supplement DELIVERY is specified for the command ADDRESS, then the street is entered instead of
the PO box.
Company
Widget Technology, Inc.
All Kind of Widgets
1005 Lido Lane
Foster City, CA 94404
Regards,
Sailaja.
Reward points if answer helps you.

Awesome Site with Example Code For All Classes

Very cool site that has example code for all the Java classes and APIs. You can submit example code yourself too!
http://www.kickjava.com/

kevjava wrote: Some things that I think would be useful:
Suggestions reordered to suit my reply..
kevjava wrote: 2. Line numbering, and/or a line counter so you can see how much scrolling you're going to be imposing on the forum readers.
Good idea, and since the line count is only a handful of lines of code to implement, I took that option. See the [line count|http://pscode.org/stbc/help.html#linecount] section of the (new) [STBC Help|http://pscode.org/stbc/help.html] page for more details. (Insert plaintiff whining about the arbitrary limits set - here).
I considered adding line length checking, but the [Text Width Checker|http://pscode.org/twc/] ('sold separately') already has that covered, and I would prefer to keep this tool more specific to compilation, which leads me to..
kevjava wrote: 1. A button to run the code, to see that it demonstrates the problem that you wish for the forum to solve...
Interesting idea, but I think that is better suited to a more full blown (but still relatively simple) GUId compiler. I am not fully decided that running a class is unsuited to STBC, but I am more likely to implement a clickable list of compilation errors, than a 'run' button.
On the other hand I am thinking the clickable error list is also better suited to an altogether more abled compiler, so don't hold your breath to see either in the STBC.
You might note I have not bothered to update the screenshots to show the line count label. That is because I am still considering error lists and running code, and open to further suggestion (not because I am just slack!). If the screenshots update to include the line count but nothing else, take that as a sign. ;-)
Thanks for your ideas. The line count alone is worth a few Dukes.

OTL: Timecard Audit Template require reason code for all transaction.

We are currently using OTL with CLA template with interface time entry from external system.
When monthly time entry interfaced into OTL each employee have to review and update their time and submit to manager, but when process to audit template they has been forced to update reason code for all transactions.
We suppose to update the reason code only for the modified transactions. Please help me.
Nonny.

nondhasid,
If you are not modifying those records which are asking for a reason field to be filled, then it should be coming from the Late setup. Check the CLA setup.
--Shiv

HT1879 i bought all episodes of breaking bad and it shows I paid for all . I was able to watch season 6 ep 1. Where are the other episodes?

I bought the entire season 6 of Breaking Bad and it shows I paid for all, but I have not been able to see more than the first episode. Where are the others?

Hi Mizmichele,
Welcome to the Support Communities!
The following information should help you understand how Season passes work:
Click on the links below for more details and screenshots:
iTunes Store: Download options when purchasing TV seasons, Season Passes, Multi-Passes, movie bundles, music box sets, or individual movies or TV episodes
http://support.apple.com/kb/HT5731
iTunes 11 or later
Season Passes and completed TV seasons
When you purchase a TV season or Season Pass, you'll be presented with three options:
Clicking the Later button will not download any episodes. You'll be able to download your episodes at any time from iTunes in the Cloud.
Clicking the Download All button will download all available episodes.
Clicking the Download button will download the earliest unseen episode of the season.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
TV Shows
Make sure you're signed in with the same Apple ID you used for the original purchase.
Tap the Videos app.
Tap TV Shows, at the bottom of the page.
Find and tap the show and season you want to download.
Tap the download icon next to the episode you want to download.
The TV show will begin downloading.
Cheers,
Judy

Make safari remember zoom level for individual pages

is it possible to make individual zoom levels for pages in safari or can you only make a global setting on that?
Safari has to remember this setting of course for this to be interesting

Afrad not ... not on Safari.
The Fireworks browsesr may work better for your needs.
How to set the zoom out or in for all pages permanently? | Firefox Support Forum | Mozilla Support
Download Firefox

Is there any T-codes for all these............

Hello all
I came to know that there are T-codes for all these like
Infoprovider,Infosource,PSA and etc.........
pl let me know
regards
balaji

Hi Balaji,
the tcodes are
rsa11   InfoProvider
rsa12   InfoSources
rsa15   PSA
Have a look in Tabele TSTCT, select your language an filter for transaction RS* to get a list of most BW-related Transactions
regards
Robert

LMS 4.1 shows "No records" for all devices

Hello everyone,
One of our end clients noticed that there is a "No records" message when choosing to show syslog messages for all devices that are configured on his LMS.
Under "LMS - Admin > System > Server Monitoring > Processes" I can see that the "SyslogAnalyzer" and "SyslogCollector" are showing as "Running normally"
Also see attached screenshot:
I would really appreciate your advise on this issue.

hello Daniel,
you are getting syslogs but they are getting filtered .
go to >>
Admin > Network > Notification and Action Settings > Syslog Message Filters
and change the filter settings . Try >> KEEP and Enabled combination. after changing settings check the syslogs collector status , Keep an Eye on the Forwarded column, you should see counts in it instead of zero .
you might need to play with filter settings to get this worked.
This is how Filters works:
Scenario 1:
All filters are disabled. Mode:Keep (Like in Our case with
Disabled the LINKUPDOWN and Mode is Keep .so all the messages for that
LINKUP DOWN will be only Forward)
All messages will be forwarded.
Scenario 2:
All filters are disabled. Mode:Drop
All messages will be filtered.
Scenario 3:
Atleast one filter is enabled. Mode:Keep
Only those syslog messages that satisfy the enabled filters will be
forwarded and all others will be filtered.
Scenario 4:
Atleast one filter is enabled. Mode:Drop
Only those syslog messages that satisfy the enabled filters will be filtered
and all others will be forwarded
Thanks-
Afroz
[Do rate the useful post]

How to make the common control button for all pages in TABCONTROL?

Dear all,
I'm using TABCONTROL for my application. I'm having STOP and SAVE control. I have to show this button to all pages in TABCONTROL.. How do i make it?
Kindly help me?..
Regards,
Srinivasan.P
Solved!
Go to Solution.

Hi srinivasan,
If you want to keep "Save" and "Stop" common, Why do you want to keep them on Tab control? Is your tab control taking entire space on Front panel? If so, you can have SAVE and STOP on other vi, and you can call this vi (MODAL).
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Identical Related Link for all pages

We're trying to put a set of identical Related Link pages for all pages.
I tried the following.
Modify the DefaultFramework Page.
Drill into Desktop Innerpage
It consists of :
Detailed Navigation
Dynamic Navigation
Drag&Relate
Related links
Portal Favorites
Content Area
Made of a Copy of the Content Area iview, and added 2 Relate Links into this iview (save it as Content_Area_2)
Removed the Original Content Area under Desktop Innerpage and added Content_Area_2)
What I essentially did was assigned related links to the content area of the Desktop Innerpage. That should bring up the Related Links for all iViews.
Is that how it can be done ?
Does not seem to work.
Is there another way of doing it.

boerli wrote:
> In GoLive there was a wonderful feature which allowed
you to click any image in
> the bin and it would display instantly all the links to
pages on which that
> picture was used. It allowed you to find content and
other pics on other pages
> related to that image instantly. It prevented
duplication. Wonderful feature I
> used constantly on running our huge websites.
>
> I can't find anything like that in DW. Now I have to try
to remember on which
> other pages I used that image. It's a nightmare...
>
> Can anyone help?
>
> boerli
>
> Am I missing something? Can anyone help me find this
feature?
You want to find all pages that have a particular image on
it?
From the Edit menu select Find and Replace.
In the Find In drop down select Entire Current Local Site
In the Search drop down select Source Code
Then in the Find field type in the filename
Now click Find All
The search results will show you all pages, you can double
click on each
file and the page will open with the filename highlighted in
the code.
Its not perfect, but Dreamweaver isn't GoLive. If its a
feature you
would like to see ask Adobe:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Dooza

I dw file.dwt files may insert server side code supposed all pages depended are in the same code eg

I dw file.dwt (exact like this ext) files may insert server side code supposed all pages depended are in the same code eg cfml?

I'm sorry, but your English is pretty difficult for me to figure. I'm assuming your asking how to have a Dreameraver template support ColdFusion. It hat is what you are asking, the template file extension should be: YourTemplateName.dwt.cfm - this tells Dreamweaver is a ColdFusion template.
I hope I understood you and that this helps.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

Show the Textbox in all page print

I need to show the Textbox in all page of report to print . Currently its showing in only one page last page only
I need to show the Textbox in
all page print
Need Help!!
Thanks

Hi ,
IF you are showing each page based on group or number of rows.
If you don't have any group then you must create on group based on number of rows as
Group expression =Ceiling((RowNumber(Nothing)) /5)
this will create group of 5 Rows, you can increase it.
After adding Group Remove Group Column not Group.
Just add Group footer and merge all the columns in the group footer, add the Text in the group footer.
you can follow how to create this type of group in below link.
https://msbitips.wordpress.com/2012/10/18/solution-for-issue-max-65536-rows-limitation-while-exporting-ssrs-report-to-excel-2003/
Thanks
Prasad
Mark this as Answer if it helps you to proceed on further.

Event Receiver for all Page Libraries in a Site Collection

We have a single site collection with many different page libraries. I'd like to create a single event receiver for ALL page libraries in the site collection (850- Page Library). Can you do this?
The event receiver will essentially remove/expire something we have stored in the System.Web.HttpRuntime.Cache. We are caching the content in the Page Library and would only like to expire the cache when a new page or change is performed on some
content in the page library.

Hi,
We can create a new feature and add an event receiver to the feature for all Page Libraries.
For more information, you can see the link below:
http://msdn.microsoft.com/en-us/library/ee231604.aspx
Here are two similar threads for you to take a look at:
http://sharepoint.stackexchange.com/questions/37555/how-to-add-event-receivers-to-all-the-lists-in-a-site-collection
http://social.technet.microsoft.com/Forums/en-US/f1297543-9035-49d6-9299-d82f546eeddd/event-receiver-for-specific-list-fires-for-all-lists-on-site-collection?forum=sharepointcustomizationprevious
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Open with [Pages4.3] for ALL Pages docs not working

Hi there,
I am unable to set the default application for all PAGES document to open in a lesser version (Pages version 4.3) to that of Pages version 5.1 which came pre-installed on my machine.
The reason why I want Pages 4.3 opening on default instead of Pages 5 is because Pages 4.3 contains the features version 5 no longer has. I also wish to retain Pages 5 to open historical documents.
I am running OS10.9.5 with Pages version 5.1 (1769) as standard with the machine when I bought it. I copied to my machine the application Pages 4.3. It runs, I have no problem opening both copies of Pages.
I now want all my Pages documents to open in v4.3 as default (not v5). This is where I fall over.
1. I "Get info" on a Pages document,
2. In the "Open with" panel I select Pages 4.3 from the dropdown menu. Upon changing the application the "Change All" button is becomes active.
3. I click on "Change All" button and confirmation message appears (see image). I click "Continue" and the confirmation message disappears.
4. ISSUE - The default application reverts back to "Pages" (see image) which is the same selection as when I started (step 1)
(Note: I also selected "Other" from the dropdown menu and selected Pages 4.3 from the applications folder through the dialogue window, but without joy)
5. When I double-click the selected document (the document I selected in step 1) it opens in Pages 4.3. However, when I double-click any other Pages document it opens in Pages5, not Pages4.3.
I might add, others in my office, with varying OS (10.10, and 10.7) and Pages 5.5.2 have not had the same issue as I have. They followed the same process as above and in Step4, their selection of Pages4.3 remained as the dropdown value, not "Pages".
I would be grateful to hear from those who have had similar issue and overcome it. Many thanks

Hi stutteringfish,
was hoping for something more definitive... something more like what the feature "open with [for all]" is designed to do.
I am afraid not. That setting does not stick with Pages 5 (or Numbers 3).
My solution is to keep icons for the old and new versions on my Dock. Then I can launch whichever and Menu > File > Open (or Open Recent) from within the appropriate version..
Wayne Contello has written a User Tip for working with the old and new versions of iWork.
Need newer version of Numbers to open file
Regards,
Ian.

SAP HR-- In form 16 , i am not able take print out for all pages..

Hi,
In SAP HR module , i have totally 5 pages, i need to take the printout for all pages.. but i am getting only 1 pages.pls could u solve this problem
Regards
senthil

There is no relation with module to printer settings
check the printer settings for declared printer in output devices
otherwise contract basis guy
regards
sateesh

Help me stop Safari showing souce code for all pages

Similar Messages

Maybe you are looking for