Help me! Use CallBack in Outbound at UCCE

Hello everybody. I want to know how can I enable the call back button, because i started an outbound campaign and everything as well, but i don't know how to use the callback utility.
I read the official outbound guide from cisco, but i don't know how to enable the callback. When the outbound call arrives, i accept the call but the calllback button still disable.
I tryied to see in Cisco Administrator Desktop but didn't help.
Anyone can help me?

Hi,
the call must be established with the customer in order to have the Callback functionality available.
If you have preview campaigns, it means: first the reservation call arrives. Accept it. The system will dial the customer. Customer picks it up. You talk. Then you may be able to shcedule a callback.
G.

Similar Messages

C++: Is it possible using callback function with ncacn_http and rpcproxy server ?

I have a remote procedure and I can call it using http over rpc. I pass trough an rpc proxy server for arriving to my rpc server.
But I cannot call a callback function to my client inside the server function.
Is it possible using callback function with ncacn_http and rpcproxy server ?
We are using IIS on windows server 2008 R2 and the server rpc and the client on the same PC with rpc rpoxy.
If I use ncan_ip_tcp all works fine.
Thanks
Gianluca

Hi,
About the develop question please post to the MSDN forum.
MSDN forum Developer Network
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesVirtualNetwork&filter=alltypes&sort=lastpostdesc
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why do we use inbound and outbound plugs in abap webdynpro?

hi all,
why do we use inbound and outbound plugs in abap webdynpro?
Thanks

Actually we have 2 types of plugs
1.View plugs
2.Window plugs/Interface Plugs
plugs are for navigating one view to the other and also you can pass the parameters along with the plugs.
Outbound plug is to navigate from one view to other view,also we can pass parameters along with the plug.
Inbound plug is like event handler/receiver of the outbound plug.
Using window plugs we can call other Web Dynpro applications.for more information check this link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
Thanks
Suman

Need help in using FM BAPI_MATERIAL_SAVEDATA

Gurus,
I need help in using the FM BAPI_MATERIAL_SAVEDATA. The FM is returning a message that says "The field MARA-MEINS/BAPI_MARA-BASE_UOM(_ISO) is defined as a required field; it does not contain an entry".
I have supplied the necessary details and yet the FM won't push through.
If possible, please post sample codes.
Below is my sample code:
===============================================
REPORT zmm_materialupload.
eject
$$******************************************************************************
$$    TYPES
$$******************************************************************************
eject
$$******************************************************************************
$$    INTERNAL TABLES (custom structure
$$******************************************************************************
eject
$$******************************************************************************
$$    RANGES
$$******************************************************************************
eject
$$******************************************************************************
$$    FIELD-SYMBOLS
$$******************************************************************************
eject
$$******************************************************************************
$$    PARAMETERS & SELECT-OPTIONS
$$******************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-001.
*SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECT-OPTIONS: s_mtart FOR mara-mtart.
SELECT-OPTIONS: s_mbrsh FOR mara-mbrsh DEFAULT 'P'.
SELECT-OPTIONS: s_werks FOR marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS: s_lgort FOR marc-lgpro DEFAULT 'OPSL' OBLIGATORY.
PARAMETERS: p_path LIKE rlgrap-filename DEFAULT 'C:\Documents and Settings\training_11\Desktop\Book4 (2ITEMS).txt' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      field_name = 'P_FNAME'
    IMPORTING
      file_name = p_path.
eject
$$******************************************************************************
$$    START-OF-SELECTION
$$******************************************************************************
START-OF-SELECTION.
PERFORM check_input.
PERFORM get_file.
PERFORM filter_input.
PERFORM populate_tabs.
PERFORM bapi_mat.
eject
$$******************************************************************************
$$    FORMS
$$******************************************************************************
FORM bapi_mat.
LOOP AT it_tab INTO wa_tab.
    CALL FUNCTION 'BAPI_MATERIAL_GETINTNUMBER'
      EXPORTING
        material_type    = wa_tab-mtart
        industry_sector = wa_tab-mbrsh
        required_numbers = 1
      TABLES
        material_number = it_matnr.
ENDLOOP.
LOOP AT it_matnr INTO wa_matnr.
    READ TABLE it_tab INTO wa_tab INDEX sy-tabix.
    wa_tab-matnr = wa_matnr-material.
    MODIFY it_tab FROM wa_tab INDEX sy-tabix.
ENDLOOP.
PERFORM populate_tabs.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
     headdata                   = it_headdata
    clientdata                 = it_clientdata
    clientdatax                = it_clientdatax
    plantdata                  = it_plantdata
    plantdatax                 = it_plantdatax
    FORECASTPARAMETERS         =
    FORECASTPARAMETERSX        =
    PLANNINGDATA               =
    PLANNINGDATAX              =
    STORAGELOCATIONDATA        =
    STORAGELOCATIONDATAX       =
    valuationdata              = it_valuationdata
    valuationdatax             = it_valuationdatax
     WAREHOUSENUMBERDATA        =
    WAREHOUSENUMBERDATAX       =
    SALESDATA                  =
    SALESDATAX                 =
    STORAGETYPEDATA            =
    STORAGETYPEDATAX           =
    flag_online                = ' '
    flag_cad_call              = ' '
    NO_DEQUEUE                 = ' '
    NO_ROLLBACK_WORK           = ' '
   IMPORTING
     return                     = it_return
   TABLES
     materialdescription        = it_materialdescription
     unitsofmeasure             = it_unitsofmeasure
     unitsofmeasurex            = it_unitsofmeasurex
     internationalartnos        = it_internationalartnos
     materiallongtext           = it_materiallongtext
     taxclassifications         = it_taxclassifications
     returnmessages             = it_returnmessages
    PRTDATA                    =
    PRTDATAX                   =
    EXTENSIONIN                =
    EXTENSIONINX               =
IF sy-subrc = 0.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait   = 'X'
    IMPORTING
      return = it_return.
ENDFORM.                    "bapi_mat
*&      Form GET_FILE
      text
FORM get_file.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Getting data from file...'.
MOVE: p_path TO gv_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gv_file
      filetype                = 'ASC'
      has_field_separator     = 'X'
      read_by_line            = 'X'
    TABLES
      data_tab                = it_tab
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "GET_FILE
*&      Form check_input
      text
FORM check_input.
Material Type
IF s_mtart-low IS INITIAL AND s_mtart-high IS INITIAL.
   s_mtart = 'IEQ'.
   s_mtart-low = 'ABF'.        "Waste
   s_mtart-high = 'ZTRD'.      "Stock Items
   APPEND s_mtart.
ENDIF.
IF s_mtart-low IS NOT INITIAL AND s_mtart-high IS INITIAL.
    MOVE: s_mtart-low TO s_mtart-high.
ENDIF.
Industry Sector
IF s_mbrsh-low IS INITIAL AND s_mbrsh-high IS INITIAL.
   s_mbrsh = 'IEQ'.
   SELECT mbrsh
   FROM mara
   INTO TABLE it_mbrsh.
   s_mbrsh-low = wa_mbrsh-mbrsh.
   LOOP AT it_mbrsh INTO wa_mbrsh.
     s_mbrsh-high = wa_mbrsh-mbrsh.
   ENDLOOP.
   APPEND s_mbrsh.
ENDIF.
IF s_mbrsh-low IS NOT INITIAL AND s_mbrsh-high IS INITIAL.
    MOVE: s_mbrsh-low TO s_mbrsh-high.
ENDIF.
Plant
IF s_werks-low IS INITIAL AND s_werks-high IS INITIAL.
    s_werks = 'IEQ'.
    s_werks-low = '1000'.
    s_werks-high = '2000'.
ENDIF.
IF s_werks-low IS NOT INITIAL AND s_werks-high IS INITIAL.
    MOVE: s_werks-low TO s_werks-high.
ENDIF.
Storage Location
IF s_lgort-low IS NOT INITIAL AND s_lgort-high IS INITIAL.
    MOVE: s_lgort-low TO s_lgort-high.
ENDIF.
ENDFORM.                    "check_input
*&      Form Filter_input
      text
FORM filter_input.
SORT it_tab BY matnr mtart mbrsh werks lgort.
LOOP AT it_tab INTO wa_tab.
   IF wa_tab-mtart NOT IN s_mtart.
     DELETE it_tab WHERE mtart NOT IN s_mtart.
   ENDIF.
   IF wa_tab-mbrsh NOT IN s_mbrsh.
     DELETE it_tab WHERE mbrsh NOT IN s_mbrsh.
   ENDIF.
    IF wa_tab-werks NOT IN s_werks.
      DELETE it_tab WHERE werks NOT IN s_werks.
    ENDIF.
    IF wa_tab-lgort NOT IN s_lgort.
      DELETE it_tab WHERE lgort NOT IN s_lgort.
    ENDIF.
ENDLOOP.
ENDFORM.                    "Filter_input
*&      Form populate_tabs
      text
FORM    populate_tabs.
LOOP AT it_tab INTO wa_tab.
    MOVE: wa_tab-matnr TO wa_headdata-material,
          wa_tab-mbrsh TO wa_headdata-ind_sector,
          wa_tab-mtart TO wa_headdata-matl_type,
                   'X' TO wa_headdata-basic_view,
                   'X' TO wa_headdata-sales_view,
                   'X' TO wa_headdata-purchase_view,
                   'X' TO wa_headdata-mrp_view,
                   'X' TO wa_headdata-account_view.
         wa_tab-matkl TO wa_clientdata-matl_group,
         wa_tab-meins TO wa_clientdata-base_uom,
         wa_tab-groes TO wa_clientdata-size_dim,
         wa_tab-gewei TO wa_clientdata-unit_of_wt,
         wa_tab-ntgew TO wa_clientdata-net_weight,
                  'X' TO wa_clientdatax-matl_group,
                  'X' TO wa_clientdatax-base_uom,
                  'X' TO wa_clientdata-size_dim,
                  'X' TO wa_clientdatax-unit_of_wt,
                  'X' TO wa_clientdatax-net_weight,
         wa_tab-werks TO wa_plantdata-plant,
         wa_tab-ekgrp TO wa_plantdata-pur_group,
         wa_tab-prctr TO wa_plantdata-profit_ctr,
         wa_tab-werks TO wa_plantdatax-plant,
                  'X' TO wa_plantdatax-pur_group,
                  'X' TO wa_plantdatax-profit_ctr,
         wa_tab-werks TO wa_valuationdata-val_area,
         wa_tab-bklas TO wa_valuationdata-val_class,
         wa_tab-peinh TO wa_valuationdata-price_unit,
         wa_tab-verpr TO wa_valuationdata-moving_pr,
         wa_tab-stprs TO wa_valuationdata-std_price,
         wa_tab-xlifo TO wa_valuationdata-lifo_fifo,
         wa_tab-werks TO wa_valuationdatax-val_area,
                  'X' TO wa_valuationdatax-val_class,
                  'X' TO wa_valuationdatax-price_unit,
                  'X' TO wa_valuationdatax-moving_pr,
                  'X' TO wa_valuationdatax-std_price,
                  'X' TO wa_valuationdatax-lifo_fifo.
    APPEND wa_headdata TO it_headdata.
   APPEND wa_clientdata TO it_clientdata.
   APPEND wa_plantdata TO it_plantdata.
   APPEND wa_valuationdata TO it_valuationdata.
   MODIFY it_tab FROM wa_tab TRANSPORTING matnr.
ENDLOOP.
ENDFORM.                    "populate_tabs
$$******************************************************************************

Hai.
check the below example.
REPORT z34332_bdc_create_material .
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_return type BAPIRET2.
data: i_materialdescription type table of BAPI_MAKT,
wa_materialdescription like line of i_materialdescription.
la_headdata-MATERIAL = '000000000000000004'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'FERT'.
la_clientdata-BASE_UOM = 'FT3'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '01'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
wa_materialdescription = 'TEST'.
append wa_materialdescription to i_materialdescription.
clear: wa_materialdescription.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
PLANTDATA =
PLANTDATAX =
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA =
VALUATIONDATAX =
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
write: la_return-TYPE, ',', la_return-MESSAGE.
clear: la_headdata, la_return, la_clientdata, la_clientdatax.
regards.
sowjanya.b.

Need help in using ActiveX to retrieve a VARIANT

Need help in using ActiveX to retrieve a VARIANT.
Variant is shown as var{VT_Ul1,1} in debug
Using the following
hr = CA_VariantGetShort (&var, &value);
I get 0 for my answer instead of 1.
Solved!
Go to Solution.

Answered my own question.
VT_Ul1 is an unsigned char and not a short.

TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Performance of AQ when using callback procedure (using PL/SQL notification)

I am enqueueing XMLType in AQ.XML file is large in size.NOw I want to dequeue the AQ using PL/SQL notification(using callback procedure which will call DBMS_AQ.DEQUEUE to dequeue the AQ and process the XML.After fetching the data from XML ,I want to store these data in another table columns).
Please suggest,In this case which approach would be better to dequeue the AQ table :
1.PL/SQL notification(using callback procedure)
OR
2.Scheduling the call to DBMS_AQ.DEQUEUE to dequeue the AQ table
What would be the impact on performance of above two approaches?

Hi,
The question of performance is not down to the technique one employes to enqueue/dequeue, but at a basic level, is relative to the number of messages!
The is what the Oracle documentation states:
>
When persistent messages are enqueued, they are stored in database tables. The performance characteristics of queue operations on persistent messages are similar to underlying database operations. The code path of an enqueue operation is comparable to SELECT and INSERT into a multicolumn queue table with three index-organized tables. The code path of a dequeue operation is comparable to SELECT, DELETE, and UPDATE operations on similar tables.
>
So, if anything, the dequeue is a fraction more time & resource consuming. However, it is only a "fraction". You could always add multiple subscribers to dequeue if you want!
You could ofcourse choose to have non-persistent messages if your application does not need the kind of fault-tolerance that persistent messaging offers, which speed things up, but only a bit, so don't get too excited about it!
There are other things to consider however, which you may wish to read up on before getting bogged down on whether you should use notification or the scheduler:
- Is your system clustered?
- Concurrency on a single queue (i.e. multiple enqueues/dequeues, but single queue)
- Propogation latency issues
Read about these and much more at:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14257/perform.htm
Finally, whether you pl/sql notification or not and whether you use dbms_scheduler is down to your application requirements!
P;

I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

I have updated my iPhone 4s to iOS7 but when i connect it to itunes on my PC it give me a msg to restore your iPhone in summary tab, Please help m using win 7 and updated itunes.

What is showing on the screen of the iPhone?
Does iTunes say the iPhone is in recovery mode?

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

Attachments help - C# using Obect API

I'm in my first attempt at integrating GW functionality into a C# application. I am not an expert C# programmer either. Thus far I've been successful at getting logged into GW, creating a new mail message and sending it successfully. However adding code to attach a file to my message returns an exception from the GroupwareTypeLibrary with the unhelpful error message "Unknown Error". Below is my code. If I comment out the line:
objMessage.Attachments.Add("c:\reg.log",1,"reg.log ");
the program runs successfully, happily sending my mail to the recipent mailbox. I know the c:\reg.log file exists and I have permissions to it.
Any advice as to what I'm doing wrong would be of tremendous help, as I've already search and cruised all the forums on GW API I can find to no avail. Running GW 7.03 I think on client and server side.
using System;
using System.Collections.Generic;
using System.Text;
using System.IO;
using GroupwareTypeLibrary;
namespace GWEmailTest
class Program
public static void Main()
GroupwareTypeLibrary.Application objApplication = new GroupwareTypeLibrary.Application();
GroupwareTypeLibrary.Account objAccount;
GroupwareTypeLibrary.Messages objMessages;
GroupwareTypeLibrary.Message objMessage;
GroupwareTypeLibrary.Folder objMailBox;
GroupwareTypeLibrary.Recipients objRecipients;
GroupwareTypeLibrary.Recipient objRecipient;
objAccount = objApplication.Login("dpuls", "", "password", "", "");
objMailBox = objAccount.MailBox;
objMessages = objMailBox.Messages;
objMessage = objMessages.Add("GroupwareTypeLibrary.Message",4," ");
objRecipients = objMessage.Recipients;
objRecipient = objRecipients.Add("dpuls","","");
objMessage.Subject.PlainText = "Here's the message from C#!.";
objMessage.BodyText.PlainText = "Here's the report you wanted.";
objMessage.Attachments.Add("c:\reg.log",1,"reg.log ");
objMessage.Send();

Markus,
Thanks so much for your quick reply. I appreciate your willingness to help me overcome my ignorance. Here's what I found:
objMessage = objMessages.Add("GW.MESSAGE.MAIL", 4);
results in a C# compiler error "no overload method for 'add' requires '2' arguments". This tells me the third paramater is required for the GroupwareTypeLibary COM object, so I added the third null parameter back in, eliminating the compiler error. Then I still got the same "unknown error" exception back from the COM library as before.
So I went back to my shotgun approach of trying variations on parameter passing (instance variables instead of literals, etc). I noticed at one point when I tried another test file that I got a compiler error on a string literal of the path\filename "c:\csharptest.txt". Aha, says I ......
To make a long story short, by happenstance, my "c:\reg.log" parameter gets read in C# as containing an escape sequence reference, i.e. "\r" and when I changed to another test file it read "c:\csharptest.txt" as an INVALID escape sequence "\c". The fix then was to correct the problem of the reading of escape sequences in my string literal by changing my line of code to :
objMessage.Attachments.Add(@"c:\reg.log","1","");
Problem solved! Thanks again for your help.
dennis puls
Originally Posted by Markus Colorado
I suppose the way you're adding a draft message to the collection is false.
>> objMessages = objMailBox.Messages;
>> objMessage = objMessages.Add("GroupwareTypeLibrary.Message",4," ");
The function "Add()" takes only 2 parameters, 'ClassName' + 'ObjType'.
'ClassName' stands for the sort/subtype of message you'd like to create.
'ObjType' stands for 'draft' or 'personal'
Try the following:
objMessages = objMailBox.Messages;
objMessage = objMessages.Add("GW.MESSAGE.MAIL", 4);
The rest should be fine; the code for adding the attachment seems OK.
Markus
"dpuls" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
>
> I'm in my first attempt at integrating GW functionality into a C#
> application. I am not an expert C# programmer either. Thus far I've
> been successful at getting logged into GW, creating a new mail message
> and sending it successfully. However adding code to attach a file to my
> message returns an exception from the GroupwareTypeLibrary with the
> unhelpful error message "Unknown Error". Below is my code. If I
> comment out the line:
> objMessage.Attachments.Add("c:\reg.log",1,"reg.log ");
>
> the program runs successfully, happily sending my mail to the recipent
> mailbox. I know the c:\reg.log file exists and I have permissions to
> it.
>
> Any advice as to what I'm doing wrong would be of tremendous help, as
> I've already search and cruised all the forums on GW API I can find to
> no avail. Running GW 7.03 I think on client and server side.
>
> ****************************
> using System;
> using System.Collections.Generic;
> using System.Text;
> using System.IO;
> using GroupwareTypeLibrary;
>
> namespace GWEmailTest
> {
> class Program
> {
> public static void Main()
> {
> GroupwareTypeLibrary.Application objApplication = new
> GroupwareTypeLibrary.Application();
> GroupwareTypeLibrary.Account objAccount;
> GroupwareTypeLibrary.Messages objMessages;
> GroupwareTypeLibrary.Message objMessage;
> GroupwareTypeLibrary.Folder objMailBox;
> GroupwareTypeLibrary.Recipients objRecipients;
> GroupwareTypeLibrary.Recipient objRecipient;
>
> objAccount = objApplication.Login("dpuls", "", "password", "",
> "");
> objMailBox = objAccount.MailBox;
> objMessages = objMailBox.Messages;
> objMessage = objMessages.Add("GroupwareTypeLibrary.Message",4," ");
> objRecipients = objMessage.Recipients;
> objRecipient = objRecipients.Add("dpuls","","");
> objMessage.Subject.PlainText = "Here's the message from C#!.";
> objMessage.BodyText.PlainText = "Here's the report you wanted.";
> objMessage.Attachments.Add("c:\reg.log",1,"reg.log ");
> objMessage.Send();
> }
> }
> }
> ****************************
>
>
> --
> dpuls
> ------------------------------------------------------------------------
> dpuls's Profile: NOVELL FORUMS - View Profile: dpuls
> View this thread: Attachments help - C# using Obect API - NOVELL FORUMS
>

How can I print stuff from the 'Help' file using my MacBook Air?

How can I print stuff from the 'Help' file using my MacBook Air?

Open the Help viewer, select a category then from the menu bar top of your screen, click File > Print

I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

Goto > Settings > Safari... Enable Cookies > Always
Good luck!

Help in using listagg function for more than 8000 char.

Hi Friends,
Need you urgent help in using listagg function for more than 8000 char.
I did the below sample SQL and in "e_orig" and "d_orig" for upto 4000 char it is working fine but I have to use it for more than 8000 char. and it is giving error,
I checked the listagg function is having limitation of 4000 char.
I tried but I am unable to achive this. Can someone provide me a sample example to achive this
select d.dname,d.loc,e.hiredate
,listagg(e.ename,',' ) within group (order by e.deptno) over (partition by e.deptno) as e_orig
,listagg(e.ename, ',') within group (order by e.sal) over (partition by e.deptno) as d_orig
from emp e, dept d
where e.deptno=d.deptno;[ This is my first post, I gone through the guideline for posting a post , and try to go according to that ( I have not pasted here create table and insert as I have used basic table emp, dept for example), please let me know if still I should give this, I will take care from my next post ]
Thanks in advance

Interesting, I didn't know you could do that, but...
BluShadow wrote:
You could write some PL/SQL code that does it all for you, but that would involve loops and would be slow.Well, objects are written in PL/SQL aren't they? And presumably there'll be implicit looping too? So it's not at all obvious that this method will be faster than doing the joining in PL/SQL in memory. The only way to find out is to benchmark them - so I have done that.
I noticed that OP's ref cursor actually only ever retrieves a single record for a bound department number, so I decided the best thing would be to test using a procedure that passes an output string back. I selected all (109) employees and put spaces in to ensure above 4000 characters. I also noticed that as he is using PL/SQL he probably can use a VARCHAR2 type, but just not ListAgg in the query, so I wrote short procedures as follows:
SimpleAggChr     - bulk collect and array processing, VARCHAR2 output
ClobAggPrc     - the custom aggregation method, CLOB output
SimpleAggClob     - bulk collect and array processing, CLOB output
I then wrote a driving script that calls them in the order above and times each call (I like benchmarking so I have my own timing object to make it easy). I then print the lengths for checking, and my object writes the timings to my output table. Running a few times I got varying results, but generally it looks like there isn't a lot to choose between them for performance.
Here's the procedure code:
CREATE OR REPLACE TYPE char100_list_type AS TABLE OF VARCHAR2(100)
CREATE OR REPLACE PROCEDURE SimpleAggChr (x_out OUT VARCHAR2) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggChr;
CREATE OR REPLACE PROCEDURE SimpleAggClob (x_out OUT CLOB) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggClob;
SHO ERR
PROMPT ClobAggPrc
CREATE OR REPLACE PROCEDURE ClobAggPrc (x_out OUT CLOB) IS
BEGIN
SELECT clobagg(first_name || '                                        ' || last_name || ',')
    INTO x_out
    FROM employees
   ORDER BY salary;
END ClobAggPrc;
SHO ERRand the driving script:
SET SERVEROUTPUT ON
SET TIMING ON
DECLARE
l_enames_c1     CLOB;
l_enames_c2     CLOB;
l_enames_v     VARCHAR2(32767);
l_timer     timer_set_type := timer_set_type ('Aggregation');
BEGIN
Utils.g_id := 'Aggregation';
SimpleAggChr (l_enames_v);
l_timer.Increment_Time ('SimpleAggChr');
ClobAggPrc (l_enames_c1);
l_timer.Increment_Time ('ClobAggPrc');
SimpleAggClob (l_enames_c2);
l_timer.Increment_Time ('SimpleAggClob');
DBMS_Output.Put_Line ('SimpleAggChr returned string of length ' || Length (l_enames_v));
DBMS_Output.Put_Line ('ClobAggPrc returned string of length ' || Length (l_enames_c1));
DBMS_Output.Put_Line ('SimpleAggClob returned string of length ' || Length (l_enames_c2));
l_timer.Write_Times;
END;
SET TIMING OFF
SET LINES 150
SET PAGES 1000
COLUMN id FORMAT A30
COLUMN line_text FORMAT A120
SELECT line_text
FROM output_log
WHERE id = 'Aggregation'
ORDER BY line_ind
/and the results:
SimpleAggChr returned string of length 5779
ClobAggPrc returned string of length 5779
SimpleAggClob returned string of length 5779
PL/SQL procedure successfully completed.
Elapsed: 00:00:27.05
LINE_TEXT
Timer Set: Aggregation, constructed at 03 Nov 2011 16:27:07, written at 16:27:35
================================================================================
[Timer timed: Elapsed (per call): 0.02 (0.000016), CPU (per call): 0.01 (0.000010), calls: 1000, '***' denotes corrected
line below]
Timer              Elapsed          CPU          Calls        Ela/Call        CPU/Call
SimpleAggChr          9.84         0.36              1         9.84400         0.36000
ClobAggPrc            9.37         0.32              1         9.37400         0.32000
SimpleAggClob         8.25         0.22              1         8.25000         0.22000
(Other)               0.00         0.00              1         0.00000         0.00000
Total                27.47         0.90              4         6.86700         0.22500
13 rows selected.

Help needed using adobe exportpdf

The first time I used adobe export pdf it worked well. However the next time and every other time I try to convert a pdf doc to word docx I get the error message at the end of the uploading session. "pdf doc failed to export to m,icrosoft word. There was an unexpected problem.
Anyone overcome this problem?

Hi Stacy
               Thanks for that info. I was aware of the 100MB limit but
your response made me think again and go back to the problem and this is
what I found. The first pdf document I uploaded into Adobe export pdf was 43
MB and it went through fine. when I looked at the conversion to Word docx I
found it had been transformed into 83MB.
So the conversion (which was a children's book with lots of images in it)
resulted in an increase of MBs by a factor of 1.7.
The second pdf document I uploaded was 64MB and this failed. If I apply the
1.7 factor then the Word docx I wanted was going to be 109MB and therefore
over the 100MB limit.
I didn't know that converting pdf to word would increase the MB like that.
Why, I don't know so thanks for your help I've learnt something new.
Cheers
            Garth
In a message dated 07/10/2013 04:42:36 GMT Daylight Time,
[email protected] writes:
Re: Help needed using adobe exportpdf
created by StacySison (http://forums.adobe.com/people/StacySison) in
Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/5740689#5740689)

Alv field with f4 help without using class

Hi,
Can any one give me a program of "Alv field with f4 help without using class".
Thanking you in advance.

hi
<b>Linking F4 Help to Fields</b>
For the last section, we will deal with linking F4 help to fields. It is easy. As usual, define, implement and register the event onf4 at proper places in your code. For F4 help, you must register the fields whose F4 request will trigger the onf4 event. For this you must prepare a table of type LVC_T_F4 and register this table using the method register_f4_for_fields. While preparing table you must include a line for each field which will trigger F4 event. For each field in the structure;
􀂾 Pass the fieldname to FIELDNAME
􀂾 Set REGISTER to make the field registered,
􀂾 Set GETBEFORE to provide field content transport before F4 in editable mode
􀂾 Set CHNGEAFTER to make the data changed after F4 in editable mode.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE .
lt_f4-fieldname = 'PRICE'.
lt_f4-register = 'X' .
lt_f4-getbefore = 'X' .
APPEND lt_f4 .
CALL METHOD gr_alvgrid->register_f4_for_fields
EXPORTING
it_f4 = lt_f4[] .
Preparing table for the fields to be registered to trigger F4 event
METHOD handle_on_f4 .
PERFORM f4_help USING e_fieldname es_row_no .
er_event_data->m_event_handled = 'X' .
ENDMETHOD .
A sample onf4 method implementation
Again, we set the attribute er_event_data->m_event_handled to prevent further processing of standard F4 help.
regards
Ravish
<b>
reward if useful</b>

Help me! Use CallBack in Outbound at UCCE

Similar Messages

Maybe you are looking for