Help me write an application?

Hi,
I have been programming for about 4 years now, mainly in PHP, C++ and AJAX and i have been working in java a little at my current job but want to learn more about it.
I have trying to think of an application that i could write in Java which would be good to do for both: learning more java and hopefully a usefull
application for work.
Im struggling to think of a good idea, so i was wondering if anyone had any good ideas or even want me to do something for them? Nothing major as im quite busy at work, but something i could do to learn more on java and hopefully helpful in general.
Thanks in advance for any suggestions.

I have trying to think of an application that i
could write in Java which would be good to do for
both: learning more java and hopefully a usefull
application for work.That would depend on your work, wouldn't it? :-)
Think of some tedious task that you have to do manually often. Perhaps you can write a program to automate (part of) it.

Similar Messages

Can anyone help me write a script that would click "get info" and then "enter" on each movie in my itunes library? I am asking because my itunes 11 repeatedly loses the artwork to my movies in my itunes library.

Can anyone help me write a script that would click "get info" and then "enter" on each movie in my itunes library? I am asking because my itunes 11 repeatedly loses the artwork to my movies in my itunes library. I can restore the artwork (and make my apple tv see the movie exists as well) by going into the movie library and clicking on each movie by hand, slecting get info, and then selecting enter. Now doing this 10 times in 20 days was fun and all BUT I would really like to automate the process so everytime itunes screws it up I can fix it easier.
I saw this example of an itunes script that restores artwork for music
tell application "iTunes" set theSelection to selection repeat with i from 1 to count of theSelection tell (item i of theSelection) set artworkCount to count of artwork repeat artworkCount times set theArtwork to data of artwork 1 delete artwork 1 set data of artwork artworkCount to theArtwork end repeat end tell end repeat end tell
but I need to tweak this to fit my needs for simply clicking the "get info" button and "enter" in the movie library rather than all the stuff this guy has listed. Any ideas or help on writing this? Thanks.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I need help with a VB Application

I need help with building an application and I am on a tight deadline. Below I have included the specifics for what I need the application to do as well as the code that I have completed so far. I am having trouble getting the data input into
the text fields to save to a .txt file. Also, I need validation to ensure that the values entered into the text fields coincide with the field type. I am new to VB so please be gentle. Any help would be appreciated. Thanx
•I need to use the OpenFileDialog and SaveFileDialog in my application.
•Also, I need to use a structure.
1. The application needs to prompt the user to enter the file name on Form_Load.
2. Also, the app needs to use the AppendText method to write the Employee Data to the text file. My project should allow me to write multiple Employee Data to the same text file. The data should be written to the text file in the following format (comma
delimited)
FirstName, MiddleName, LastName, EmployeeNumber, Department, Telephone, Extension, Email
3. The Department dropdown menu DropDownStyle property should be set so that the user cannot enter inputs that are not in the menu.
Public Class Form1
Dim filename As String
Dim oFile As System.IO.File
Dim oWrite As System.IO.StreamWriter
Dim openFileDialog1 As New OpenFileDialog()
Dim fileLocation As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
openFileDialog1.InitialDirectory = "c:\"
openFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
openFileDialog1.FilterIndex = 1
openFileDialog1.RestoreDirectory = True
If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
fileLocation = openFileDialog1.FileName
End If
'filename = InputBox("Enter output file name")
'oWrite = oFile.CreateText(filename)
cobDepartment.Items.Add("Accounting")
cobDepartment.Items.Add("Administration")
cobDepartment.Items.Add("Marketing")
cobDepartment.Items.Add("MIS")
cobDepartment.Items.Add("Sales")
End Sub
Private Sub btnSave_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
'oWrite.WriteLine("Write e file")
oWrite.WriteLine("{0,10}{1,10}{2,10}{3,10}{4,10}{5,10}{6,10}{7,10}", txtFirstname.Text, txtMiddlename.Text, txtLastname.Text, txtEmployee.Text, cobDepartment.SelectedText, txtTelephone.Text, txtExtension.Text, txtEmail.Text)
oWrite.WriteLine()
End Sub
Private Sub btnExit_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
oWrite.Close()
End
End Sub
Private Sub btnClear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
txtFirstname.Text = ""
txtMiddlename.Text = ""
txtLastname.Text = ""
txtEmployee.Text = ""
txtTelephone.Text = ""
txtExtension.Text = ""
txtEmail.Text = ""
cobDepartment.SelectedText = ""
End Sub
End Class

Hi Mikey81,
Your issue is about VB programming, so Visual Basic forum is a better forum for your case. I moved this thread there,
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need help with a small application

Hi all, I please need help with a small application that I need to do for a homework assignment.
Here is what I need to do:
"Write an application that creates a frame with one button.
Every time the button is clicked, the button must be changed
to a random color."
I already coded a part of the application, but I don't know what to do further.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class ColourButton extends JFrame {
     JButton button = new JButton("Change Colour");
     public ColourButton() {
          super ("Colour Button");
          setSize(250, 150);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JPanel panel = new JPanel();
          panel.add(button);
          add(panel);
          setVisible(true);
     public static void main(String[] args) {
          ColourButton cb = new ColourButton();
}The thing is I'm not sure what Event Listener I have to implement and use as well as how to get the button to change to a random color everytime the button is clicked.
Can anyone please help me with this.
Thanks.

The listener:
Read this: [http://java.sun.com/docs/books/tutorial/uiswing/components/button.html]
The random color:
[Google this|http://www.google.com/search?q=color+random+java]

Error on Mac: couldn't write the application to the hard drive

A Mac user can load the Connect meeting interface but when he
tries to share screen he gets a pop-up that says:
"Couldn't write the application to the hard drive. Please
verify the hard disk is available" with options to retry or cancel.
On retry same error.
Any idea of what is going on and how to fix it?
thanks

Hi rpembroke,
I don't know if this will help you or not. I found the fix for me, for this problem and several others I was having.
I created, or I should say, since I am still working on this, a new user account. Once I created a new account and tried to install no more can't install to harddrive. Many of the other problems I was having are now gone also.
I am in the process of moving over just what I need as far as apps, docs, book marks etc... So far everything is working fine. So you can try creating a new account and see.
Hope this works for you.
Z

How could u write this application?

write an application to read an unknown number of integer pairs representing binary numbers from a file redirected input from the command line. do not use sentinel value or prompt.
1. Echo print in colums 1 and 2 the numbers that were read.
2. Convert each number to decimal for columns 3 and 4.
3. Count the number of 1's in the numbers for columns 5 and 6.
4. Find the larger of the decimal versions of the first and second number of each integer pair, and print that number in column 7.
5. Keep separate cumulative sum of the decimal versions of the first and second number of each integer pair, and print that number below the appropriate column after all numbers have been read.
Sample output:
10 11 101 1111 111 10000 101011 0
thanks for your interest

> hey young fella, its not a HW or something!! everyone
talks alot here like they know everthing(which they
aint gotta clue), i decided to put an easy
application to c how many people are going to be able
to write this application??
That's a little tough to believe. It's far more likely that you need some help on figuring out how to go about writing such an application. There's nothing wrong with that; just know that most folks who volunteer to help here aren't particularly interested in "proving their skills" by way of programming "challenges". They typically get far more satisfaction by helping others learn Java.
i guess u r one those fellas who dont have a clue about java!!! b/c if u
were not, this would take ur 5-6 mins of time..
So, do you have a specific question regarding those requirements? If you do, please ask. If, on the off chance you've got some special insight regarding an implementation, post your idea and get some feedback from the community.
Also, please make the extra effort to write out words such as "see", "you", "are", "your", and "because". The extra keystrokes won't cost much in the way of time, and the enhanced clarity will be appreciated by those communicating on a forum with international readership. Also, it will give the appearance that you take your question seriously, which will in turn make your question look more interesting to answer.
Thanks!
~

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

How to create a help page in my application like the one in HTMLDB ?

Hi,
What's the best way to create a help file for my application and link it like the help link at the top right of HTMLDB ?
Thank you.

That's what I did, but I have a lot of screen captures. Where would be the best place to save those gif, server or in the database by loading them via the images tab in HTMLDB ?
Thank you.

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

How to write a application using WDJ with the adobe form ?

Hi, experts,
I don't know how to write a application using !!webdynpro for java!! with the adobe form so that I can fill data to the adobe form and get data from the adobe form.
Note: I have configed the ADS(adobe document services),and I can create a application with a interactiveform in webdynpro for abap and run it successfully, so that I can fill data to the adobe form and get data from the adobe form.
Do you give me some hint?
Thanks a lot.
Best regards,
tao
Edited by: wang tao on Sep 9, 2008 8:59 AM

Hi,
Refers the following links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4fd2d690-0201-0010-de83-b4fa0c93e1a9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c9a954-aa20-2a10-64bb-ea0835204e03
Thanks
Abhilasha.

Help me connect my application

hello,
I try to connect to my database from an application. do somebody have a sample settings file to give to me? what I mean is: how can i fell the following statement:
string
' designate the following (in this order):
' DB Index, DB Name, DB Type, DB Filepath, Server Name, Username, Password
I think that my "DB Type,DB Filepath,server name" are wrong so could you give me your DB Type,DB Type,Server Name as an example?
thanks

Wow! A quintuple posting. Are you going for a record?
settings file
help me connect my application
help me connect my application
help me connect my application
help me connect my application
This may actually constitute spam.

Need a help to write the query

Hi,
I need a small help to write the query.
I have a table contains couponid,coupon,createdate,expirationdate,assigndate from couponday table
i want to write the query to select the coupon whose Expiry date in the table is NOT within 30 days.
Thanks in advance

Hi,
user586 wrote:
i want to write the query to select the coupon whose Expiry date in the table is NOT within 30 days.If you mean expirationdate (datatype: DATE) is not within 30 days (past or future) of run time, then:
SELECT coupon          -- or whatever columns you want
FROM    table_x
WHERE   expirationdate NOT BETWEEN SYSDATE - 30
                            AND      SYSDATE + 30
;

HTML Help in a JAVA Application?

Hope someone can answer this question. I thought that there
was a way to use HTML Help with a JAVA application, but I am being
advised by my programmer that I must use JAVA Help. I don't have a
problem with using RoboHelp to convert my HTML Help file to JAVA
Help but I do have very serious concerns about the finished output.
In a word, it is "ugly." Numbers do not align properly with text,
bullets are huge, bolded words do not come over bolded, text only
popups appear as huge windows and the list goes on... Any help will
be greatly appreciated!
Regarads,
Fran

Our Java applications work just fine with webhelp. See the
topic on my site.

Can any one help me sending Oracle application server Cloning document 9.0.4 version

Can any one help me sending Oracle application server Cloning document 9.0.4 version (Mail id removed by moderator)
Many Thanks in advance
Deepak

Hi Deepak,
In first place application server 9.0.2 is desupported since 30th June 2007.So oracle would always recommend its customer to be on the latest versions.
Please follow the below URL for cloning Appplciation Server 9.0,.4
Cloning Application Server Middle-Tier Instances
Regards,
Prakash.

How do I write javacard applications and run them in Eclipse 4.2

Greetings-
I have seen some content online about javacard on older versions of Eclipse. I like to ask if it is possible to write javacard applications in Eclipse 4.2? I have an Android development environment, which is basically the bundle that Google provides. I want to know if it is possible for me to use this instance of Eclipse. If not, which version of Eclipse is the one to go with please?

I will recommend you this plugin (JCDE for eclipse)
http://sourceforge.net/projects/eclipse-jcde/
Note that it will only work with JavaCard framework 2.2.2, I am developing applets on Eclipse Kepler (4.2 probably).
If you dont want to use this plugin, I suggest you try to find or write ANT script which would convert your class files into cap. You would be implementing the applet using standard Java project.

Help me write an application?

Similar Messages

Maybe you are looking for