HELP!! Microphone with Audigy 2 ZS not worki
I have one of those headphone sets with the microphone built in. I've got my headphones and the microphone plugged in. I cannot record or anything. I've tried chaning the settings in mixer but to no avail. Any ideas or suggestions would be greatly appreciated!
Pat,
When you unmute your microphone input on your Audigy 2 ZS with your mic plugged in are you able to hear the mic over the speakers? If so and you select the microphone as your recording source and it still doesn't record then you will want to try cleansweeping and reinstalling the drivers for the sound card. If it doesn't make any sound whatsoever you may want to call Technical Support to see if a repair is needed. Their contact page is here:
http://us.creative.com/support/custsup
The cleansweep procedure for the card is here:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy
Similar Messages
-
Help Needed With "Extend Marker" Function Not Working
I have several Clips and used the "DV Start/Stop Detect" function to find the time code breaks, which seems to work well. I've now got a clip full of Segment markers.
The problem arises when I try to use Extent Markers "Option + `" to make subclips. When I put the play head on a subsequent marker, the Marker/Extend function is grayed out.
Extending a marker that I have created using the M key works perfectly.
Why can I not use the Extend function on Segment Markers?
Any help on this is greatly appreciated. I have 30 odd clips that I need to set up segments for, and doing it manually will add hours to my workload.
Thanks
Gary
Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD Mac OS X (10.4.3) Final Cut Studio FCP 5.0.4Thanks for the reply.
I am completely aware of items 1 through 3, and never Extend markers in the Timeline. Only the Viewer.
To perform an Extend Marker and avoid headaches, load the captured clip - the one with the video icon in the Browser - into the Viewer. Then, as you scrub along in the Viewer, Option-` as needed.
That is precisely what I am doing.
To Extend the marker I first double click the clip to load the entire clip into the Viewer, where all the Section markers are displayed. I then check Mark>Markers>Extend and the function is grayed out. However, if I move the playhead one frame prior to the Section marker, the previous Section marker extends to the frame prior to the new play head position.
If I do this with manually entered markers (using the M key, creating Marker 1, 2, 3.... in sequence on the Viewer timeline), then the Previous marker is extended to the frame immediately prior the the current play head position - i.e. from Marker 1 to Marker 2. I do not have to move off the Marker 2 position to be able to extend Marker 1.
Also, simply selecting all your Markers and either dragging them to another bin (or pressing Command-U) does not produce the needed subclips?
Of this I am also aware. I find the Command-U process just confuses the issue, creating more clips to manage (others may disagree). I prefer to simply drag the "Subclips" directly from the Main clip into a Timeline.
Because you're doing all this to get subclips, right? Or wrong?
If I understand your reply correctly, I think you misunderstood my problem. I have been using subclips for several years, and find them VERY useful, especially with multi-camera shoots. So, I am quite familiar with creating and extending markers.
I just started experimenting with the Detect feature and find it works quit well (most of the time). My problem is that the Segment markers created by the Detect process, do not perform the same as manually place markers, as far as the Extend marker function is concerned, anyway.
BTW - By using the TC display in my Panasonic PV-GS400 Camera, and sending the FCP video via Firewire to the camera, the camera displays the TC on the captured clip, which I then rename the marker to for TC reference. As long as the Date/Time on the cameras are properly synced, syncing clips in the Timeline is a breeze!!
Anyway, to clarify, my process is as follows:
1. Capture a clip.
2. Display the clip in the Viewer
3. Select "DV Start/Stop Detect" and watch as the section markers appear in the Viewer.
4. In Viewer, place play head on the first Section marker
5. Press the M key to Edit Marker.
6. Change the Name of the marker to the timecode of the Marker now displayed in the Camcorder window.
7. Use Shift-Down Arrow to move to the next Section Marker
8. Press Option+` to Extend the previous marker - which does not work and is grayed out in the Mark>Markers>Extend menu.
9. Back to step 5.
This process works perfectly with manually created markers. Because the Extend works if I move the play head one frame prior to the current Section marker, this tells me there is something "special" about the Section marker that disables the Extend function, unlike a manually created marker.
BTW - If I delete the Section marker, and create a manual marker at the same frame, the Extend marker function works again. Again, indicating that Section markers are different somehow from manual Markers.
Hopefully, this wordy explanation of my process clarifies my problem.
Aside: The clips are supplied to me by a customer on a 500GB FW800 drive. FCP5 was used to capture the clips from the original Tapes (which I do not have access to). I am the editor for the project.
Thanks again for the reply. It is greatly appreciated. If there is any other info that I have missed that will help figure this out, please let me know and I will post a response a quickly as possible.
Gary -
ASIO with Audigy 2 NX not work
I am having trouble with this -
My Soundblaster 2 NX has too much latency when using the standard drivers. My midi triggers way before the audio plays from the soundblaster. After some research I realize that I could decrease this latency by using the ASIO drivers. I updated to the latest drivers and firmware and when I try chosing the "CREATIVE ASIO USB" from within Fruity Loops it says "ERROR WHILE CREATING THE ASIO DRIVER". Anyone know why this is?Message Edited by badlieu on -28-2004 05:2 PMcrazynorvegian wrote:
so... what is this CREATIVE ASIO USB driver that shows up? It appears to be installed, but is completely non-functional. What I mean is this: The sound card "works" fine, for most audio applications. But I have an audio app (FL Studio) that it has issues with, and I can select which audio device I want the program to output to. It gives the options of the NX (peachy), the onboard SoundMAX (works too), and then this third option is there: CREATIVE ASIO USB. When I try to select it, it says "Error creating ASIO driver." It's not a 3rd party driver because I haven't installed anything other than the latest Creative driver package. So what is it, why is it there, since it doesn't work?
It maybe is the Windows USB audio Driver which gets listed there as asio (or CT USB driver). As I mentioned, there never before have been CT bundled ASIO for NX (it's not very hard to prepare, so perhaps they're done one (not working yet ofcourse)).
Could you post a picture showing all those selectable device drivers showing on FL (you can use free imagshack for hosting http://www.imageshack.us/). Also, have you searched the system registry for possible ASIO keys --> pointing some DLL -file (the Device Driver name (i.e. Creative USB ASIO) maybe is showing there but is there a DLL linked)?
Did you try the Asio4All? It should work w/ under 0ms latency on FL.
jutapaMessage Edited by jutapa on 06-28-2006 0:2 AM -
Audigy 2 card with Audigy Front Panel not worki
I've just bought a used audigy 2 card with an audigy front panel. I have installed everything and have sound from the card to my speakers.
The front panel has a blinking light on the optical out and when I plug headphones into the panel, I can hear static and control the volume of the static from the knob on the panel.
I can't hear anything else through the headphone jack and can't get any input signal using the line 2 input on the front panel.
Connections and drivers appear to be OK, am I missing something......
Thanks,Dave.David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy -
microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.
Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair. -
My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?
There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine. -
Please help me my apple id its not working what do i do?
please help me my apple id is not working what do i do
If you desire speedy resolution it helps to be more specific with error messages etc. when asking a question here.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
We need to get some help and explanations about iChat video not working.
I've read so many postings about iChat Video hoping for an answer to my problem, but not only did I not find an answer, no one else has been receiving an answer either.
I've had multiple problems with my ichat video not working.
I either get an error saying someone didn't accept which isn't the case, or I get some error-8 or something ridiculous like that.
Can we get some help from apple support or something?!Short answer: No, we can´t...!
Apple don´t care about us users, unless you pay for an Apple Care Service. Try your best to follow some advices from around this forum. That´s the only help you will get.
Some people have got their iChat video working again after following some advice. By the way. I´m not one of them... I´ve tried every single tip I read here, but I´m still stuck with text chat only...
Good luck. -
Hyperlink with tracking applied does not work in PDF
We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.
Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
> -
XI ALERTS with out BPM Are not working.
Hi All,
We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
<b>Note -
Object -
Name</b>
906044 -
function---- SXMS_ALERT_ERROR_RECEIVE
906044 -
function --- SXMS_ALERT_ERROR_SEND
906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
906044 -
method -
CL_XI_ALERT_UTIL GET_MDT_URL
905896 -
method -
CL_XI_ALERT CREATE_ALERT
Thank you
Ganges Leaves.Ganges
Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
Regards,
---Mohan -
"no serializer is registered..." error with a web service not working
I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
DanI'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan -
Converting WordPerfect to PDF with desktop printer tool: Not working
I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.
Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
Please help again and soon, :).
Date: Tue, 7 Jan 2014 11:52:08 -0800
From: [email protected]
To: [email protected]
Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
Re: Converting WordPerfect to PDF with desktop printer tool: Not working
created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Please do following
(A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
(B). If you have not installed Adobe Postscript driver yet then please install one as below:
How to Install PS printer:
1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
2. Select "Add a local printer"
3. Select "Use an existing port: LPT1: (Printer port)
4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
Adobe PS driver files:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
(C) Go to the printer configure port and verify your Adobe ID and password
1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
2. Click right mouse to open “Printer properties”.
3. Select “Ports” tab
4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
5. Click “Configure Port…” button at the bottom
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
When printing to PDF you will see below and an email is delivered to your email inbox. The converted PDF file will be stored at https//files.acrobat.com.
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
Thank you
Hisami
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
When turn on stereo expand ,it doesn't upmix!!i get the normal sound with less dialouge.Please helpppp!!!!
Re: HELP!!!! CMSS not working!!!8 This is a necro, but:
The CMSS-3D Stereo Expand mode is rather subtle. It should be used when you have 2.0 source, but surround speaker system, like 5..
Most of the time it does not do much: on regular music it just gives slightly wider stereo picture, with very slight backstage sounds, but hardly any.
Sometimes the Stereo Expand then kicks in, and can create wonderful 3D sound from 2.0 source. Lately I have been noticing excellent surround sound from regular television 2.0 stereo sound! For some reason CMSS-3D Stereo Expand can really separate "background" sounds and move them to the surround speakers. And it does indeed create the center speaker effect from (tight middle) stereo effects.
But you need to listen to hear this.
Of course you need to have the settings proper: have the actual speaker system matching your output devices, and then have CMSS on and the source needs to be 2.0.
CMSS-3D Headphones is quite another mode, and I will not go into it here. I do not have good enough information about it when listening to 2.0 source.
For 5. source the CMSS-3D Headphones works admirably. However the Bass Redirect or possible bass boost is extracted from all the (virtual) spekares, which have just received the new signal from the "upmix algorithm": if you have any bass enhancements, you may need to drop them for CMSS-3D Headphones.
Notice: having "synchronize with windows spekers" is best to be on, so you don't have 2.0->5.(Windows)->5.(virtual)->Headphones transition, this may muffle the sound a lot, and add too much bass boost. It's best to have 2.0 Headphones mode direct on the sound device, and let it extract the 5. signal from the surround sources and do it's magic for 2.0 mapping. This way you avoid extra Bass Redirect as well. -
I am having real problems with my hotmail account not working on my iMac
I am having real problems with my hotmail account not working on my IMac but works absolutely fine on my Iphone 5. Can anyone help with the setup for iMac. I am with BT for my Broadband. I am cionverned if I route my Hotmail accoutn to GMail will iy stop working on my Ipone.
How are you accessing Hotmail? Via your web browser? Are you using Apple Mail? Outlook?
The answer will be different depending on how you want to access Hotmail.
If you are using an email client (like Apple Mail, Outlook, Entourage, etc.)) then you need to set up a mail account in your email software.
The incoming Hotmail settings are these:
Incoming server: pop3.live.com
User name: Your full Hotmail email address (aka "me @ hotmail.com" or "me @ live.com")
Password: Your Hotmail password
POP port: 995
Use SSL to connect : yes
The outgoing Hotmail settings are:
Outgoing server: smtp.live.com
User name: Your full Hotmail email address
Password: Your Hotmail password
SMTP port: 587 (override the default port if necesssary)
Use SSL to connect : yes
Maybe you are looking for
-
My MacBook and my iphone - 2 Apple IDs,Diff Cloud Accounts..Seeking Advice
I know I should have been able to decode an answer to my dilemma from other posts, but I can't. I apologize in advance and would be grateful for any advice. I have a .mac apple ID from years past which has been the ID that I have used (and my three
-
Hi All, I've asked this before, but did not get the answer I was hoping for; maybe I didn't state my problem clear enough. Let me ask again. If I have a table as below(format is: int, string, string): 1, Todd, Smith 10, Chris, Lee 5, Sue, Wilson How
-
Connect OS 9 G4 to an iMac with 10.6
Hi I want to connect a G4 Mac running 9.1 to a new iMac running 10.6, using ethernet- will this work? I would like to know before I buy. Thanks.
-
my ipad2 wifi +3G version 4.3.5.(8L1) was bought in sigapore and been offered to me as a a gift. if i want to update it to version 5.0.1 do i need to check if its factory unlocked ?.i'm using the ipad in mauritius not in singapore
-
hi gurus, can anyone please tell me some reporting tools in java. where i can embed MS Excel . Our's is swing application thanks in advance , kiran