Help! Need to generate a color from these settings

Hi,
I have a white layer with it's blending mode set to multiply, I need to add these settings to create a tint to that layer. I have no idea how to do so using the info I was given. If anyone has any insight it would be of HUGE help...
Also if you are able to do this, can you explain it please. I have many more colors to generate.
Alpha range: -.64
Alpha Offset range: 255
Red range: .22
Red Offset range: 44
Green range: .29
Green Offset range: 255
Blue range: 1
Blue Offset range: 254

> Hi everyone. I am new to Labview and must prove that using LV and a
> data acquisition card that it is possible to produce a sinewave of
> 1kHz out of the analog out port and also be able to read in the
> results thru an external filter to the analog input ports.
>
> The other requirement is the sine wave must run continuosly for at
> least 10 seconds without having an glitches from restarting the loop.
>
> I have tried several vendors for acquisition cards and believe that I
> need a card that has some sort of FIFO buffer. Anyone have any ideas
> on how I accomplish all this?
A FIFO buffer will help in this, but more importantly, you need
a driver for the card that supports a kernel level buffer that
can hold the points not stored on the card and access them at
interrupt time. Without this, you are trying to get the OS
to do something every 1ms, and that is too much to ask. There
will be times when it is busy and ignores you for 10ms or more.
If you are using NI-DAQ, there are icons for analog output,
or AO. There are single point AO functions for setting up
a DC voltage, and there are buffered AO routines so that you
can send the entire signal and set it to repeat.
In parallel, you can configure an analog input or AI task
that acquires and does whatever to the signal.
Better yet, you should be able to browse through the Solution
Wizard and find an example that does this or something close
right out of the box.
Greg McKaskle

Similar Messages

Help needed in generating random colors...

Please review my code. I'm trying to generate ten triangles in random colors but each time I run the app the triangles are always in the same color (but a different color with each run). What am I doing wrong?
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
public class DrawTriangles extends JFrame
public DrawTriangles ( )
super ( "Drawing Random Triangles" );
setSize ( 400, 400 );
setVisible ( true );
public void paint ( Graphics g )
super.paint ( g );
int [ ] xArray = { 10, 40, 70, 100, 130, 160, 190, 220, 250, 280 };
int [ ] yArray = { 30, 60, 90, 120, 150, 180, 210, 240, 270, 300 };
Graphics2D g2d = ( Graphics2D ) g;
GeneralPath triangle = new GeneralPath ( );
for ( int counter = 0; counter < 10; counter++ )
triangle.moveTo ( xArray [ counter ], yArray [ counter ]);
for ( int count = 1; count < 3; count++ )
triangle.lineTo ( xArray [ counter ] + 20, yArray [ counter ] + 40 );
triangle.lineTo ( yArray [ counter ] + 20, xArray [ counter ] + 20 );
triangle.closePath ( );
g2d.setColor ( new Color (
( int ) ( Math.random ( ) * 256 ),
( int ) ( Math.random ( ) * 256 ),
( int ) ( Math.random ( ) * 256 ) ) );
g2d.fill ( triangle );
public static void main ( String args [ ] )
DrawTriangles application = new DrawTriangles ( );
application.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );

You're are only drawing one thing, the GeneralPath, not ten things. If you want your things to have ten different colors then you will need ten different things. (ie, use 10 different general path instances)

Help needed in Connecting to SAP From Eclipse

Hi All,
Currently, we have a requirement where we need to retrieve data from SAP System and need to upload the same in a Third Party Application (Java based system).
We are able to create an account in Java Application using Eclipse IDE by hard coding the Account details. We are stuck up in establishing the SAP connection and retrieving the details and then creating the extracted account details in Java application from Eclipse.
Any pointers on this will be of great help.
Regards,
Eureka

Hi Eureka,
Please refrain from creating cross-posts in parallel forums, moreover this question is JCo-related and is not directly connected with Java EE 5. The Help needed in Connecting to SAP From Eclipse in the Java Programming forum would be enough. Please continue the discussion there.
Regards,
Vladimir

Why do v need 2 generate new smartform from scratch when v have a standard

hi experts
why do v need 2 generate new smartform from scratch when v have so many standard smartforms can any one explain in detail the scenario where v have 2 do that
thanks
bhanu

Hello Bhanu,
Standard smartforms are for standard SAP applications.
Every client will customise standard SAP to suit their own requirements. So if there is a requirement specific to the cleint, they can ask us to develop a custom Smartform.
Award points if found useful.
Regards
Indrajit.

When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
My history is only displaying one day even though I have never changed my settings even after I updated it last year.
Need to know how to restore these settings.
***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

Are you using cleanup software like CCleaner?
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Help needed in returning multiple columns from one field

Hi,
I have been given a task to rewrite the query (see below), so that I get three columns from the one field, based on their contents.
The script returns all the columns and concatenates them into one, but returns them as comma delimmited within the returned column, to generate a report.
These tables are from Siebel.
Our Oracle version is:
select banner from sys.v_$version;
--returns
Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
PL/SQL Release 8.1.7.4.0 - Production
CORE 8.1.7.0.0 Production
TNS for Solaris: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
Here is what I was given;
set arraysize 200
Spool d:\Daily_reports\Data\RegManage\Electricity\eCISPLUS_Product_Switch_Not_Started_Discount.csv
-- this will concatenate all the returned columns into one
SELECT DISTINCT '"'||
rtrim(ltrim(S_ORG_EXT.OU_NUM)) || '","' ||
rtrim(ltrim(S_ORG_EXT.NAME)) || '","' ||
rtrim(ltrim(S_EVT_ACT.TODO_CD)) || '","' ||
rtrim(ltrim(S_EVT_ACT.EVT_STAT_CD)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_SOURCE_TYPE)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_TXU_PRICELIST_NAME)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_CLASS_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_PEAKANYTIME_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_PA_CLASS_ELEC)) || '","' ||
rtrim(ltrim(S_ORG_EXT.X_OTH_ACCOUNT_NUMBER)) || '","' ||
rtrim(ltrim(S_ADDR_PER.X_NMI_NUM)) || '","' ||
rtrim(ltrim(S_ADDR_PER.X_NMI_CHECKSUM)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.QUOTE_NUM)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_COOLING_OFF_DATE)) || '","' ||
rtrim(ltrim(S_PROD_INT.NAME)) || '"'
The field S_PROD_INT.NAME is the one that I need to split so that it is retured
into three different columns.
1st column needed -
where S_PROD_INT.NAME Like 'Electricity TRUenergy Business Edge __ %'
OR S_PROD_INT.NAME Like 'Electricity TRUenergy Business Now __ %'
OR S_PROD_INT.NAME Like 'Electricity Go for More __ %'
OR S_PROD_INT.NAME Like 'Electricity Mates Rates __ %'
2nd column needed -
where S_PROD_INT.NAME Like 'Gas TRUenergy Business Edge __ %'
OR S_PROD_INT.NAME Like 'Gas TRUenergy Business Now __ %'
OR S_PROD_INT.NAME Like 'Gas Go for More __ %'
OR S_PROD_INT.NAME Like 'Gas Mates Rates __ %'
3rd column needed from
S_PROD_INT.NAME Like '* ___ Discount for Paying Your Bill by the Due Date')
-- Tables
FROM SIEBEL.S_ADDR_PER S_ADDR_PER,
SIEBEL.S_DOC_QUOTE S_DOC_QUOTE,
SIEBEL.S_EVT_ACT S_EVT_ACT,
SIEBEL.S_ORG_EXT S_ORG_EXT,
SIEBEL.S_PRI_LST S_PRI_LST,
SIEBEL.S_PROD_INT S_PROD_INT,
SIEBEL.S_QUOTE_ITEM S_QUOTE_ITEM
WHERE S_EVT_ACT.TARGET_OU_ID = S_ORG_EXT.ROW_ID
AND S_DOC_QUOTE.ROW_ID = S_QUOTE_ITEM.SD_ID
AND S_ADDR_PER.ROW_ID = S_ORG_EXT.PR_ADDR_ID
AND S_PROD_INT.ROW_ID = S_QUOTE_ITEM.PROD_ID
AND S_ORG_EXT.ROW_ID = S_DOC_QUOTE.TARGET_OU_ID
AND S_DOC_QUOTE.PRI_LST_ID = S_PRI_LST.ROW_ID
AND S_EVT_ACT.TODO_CD = 'Product Switch-Electricity'
AND S_EVT_ACT.EVT_STAT_CD In ('In Progress','Not Started','On Hold')
AND S_DOC_QUOTE.STAT_CD In ('Completed','Verbal Acceptance','Written Acceptance')
AND S_DOC_QUOTE.X_OFFER_TYPE = 'Product Switch'
AND (S_PROD_INT.NAME Like 'Electricity TRUenergy Business Edge __ %' OR S_PROD_INT.NAME Like 'Electricity TRUenergy Business Now __ %'
OR S_PROD_INT.NAME Like 'Electricity Go for More __ %' OR S_PROD_INT.NAME Like 'Electricity Mates Rates __ %'
OR S_PROD_INT.NAME Like 'Electricity __ Discount for Paying Your Bill by the Due Date' or S_PROD_INT.NAME Like 'Electricity TRUenergy Business Edge ___ %'
OR S_PROD_INT.NAME Like 'Electricity TRUenergy Business Now ___ %'
OR S_PROD_INT.NAME Like 'Electricity Go for More ___ %'
OR S_PROD_INT.NAME Like 'Electricity Mates Rates ___ %'
OR S_PROD_INT.NAME Like 'Electricity ___ Discount for Paying Your Bill by the Due Date')
UNION
SELECT DISTINCT '"'||
rtrim(ltrim(S_ORG_EXT.OU_NUM)) || '","' ||
rtrim(ltrim(S_ORG_EXT.NAME)) || '","' ||
rtrim(ltrim(S_EVT_ACT.TODO_CD)) || '","' ||
rtrim(ltrim(S_EVT_ACT.EVT_STAT_CD)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_SOURCE_TYPE)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_TXU_PRICELIST_NAME)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_CLASS_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_PEAKANYTIME_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_PA_CLASS_ELEC)) || '","' ||
rtrim(ltrim(S_ORG_EXT.X_OTH_ACCOUNT_NUMBER)) || '","' ||
rtrim(ltrim(S_ADDR_PER.X_NMI_NUM)) || '","' ||
rtrim(ltrim(S_ADDR_PER.X_NMI_CHECKSUM)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.QUOTE_NUM)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_COOLING_OFF_DATE)) || '"'
FROM SIEBEL.S_ADDR_PER S_ADDR_PER,
SIEBEL.S_DOC_QUOTE S_DOC_QUOTE,
SIEBEL.S_EVT_ACT S_EVT_ACT,
SIEBEL.S_ORG_EXT S_ORG_EXT,
SIEBEL.S_PRI_LST S_PRI_LST
WHERE S_EVT_ACT.TARGET_OU_ID = S_ORG_EXT.ROW_ID
AND S_ADDR_PER.ROW_ID = S_ORG_EXT.PR_ADDR_ID
AND S_ORG_EXT.ROW_ID = S_DOC_QUOTE.TARGET_OU_ID
AND S_DOC_QUOTE.PRI_LST_ID = S_PRI_LST.ROW_ID
AND S_EVT_ACT.TODO_CD = 'Product Switch-Electricity'
AND S_EVT_ACT.EVT_STAT_CD In ('In Progress','Not Started','On Hold')
AND S_DOC_QUOTE.STAT_CD In ('Completed','Verbal Acceptance','Written Acceptance')
AND S_DOC_QUOTE.X_OFFER_TYPE = 'Product Switch'
AND NOT EXISTS (SELECT /*+ unnest */ 'X'
FROM SIEBEL.S_PROD_INT S_PROD_INT, SIEBEL.S_QUOTE_ITEM S_QUOTE_ITEM
WHERE S_DOC_QUOTE.ROW_ID = S_QUOTE_ITEM.SD_ID
AND S_PROD_INT.ROW_ID = S_QUOTE_ITEM.PROD_ID
AND (S_PROD_INT.NAME Like 'Electricity TRUenergy Business Edge __ %'
OR S_PROD_INT.NAME Like 'Electricity TRUenergy Business Now __ %'
OR S_PROD_INT.NAME Like 'Electricity Go for More __ %'
OR S_PROD_INT.NAME Like 'Electricity Mates Rates __ %'
OR S_PROD_INT.NAME Like 'Electricity __ Discount for Paying Your Bill by the Due Date' or S_PROD_INT.NAME Like 'Electricity TRUenergy Business Edge ___ %'
OR S_PROD_INT.NAME Like 'Electricity TRUenergy Business Now ___ %'
OR S_PROD_INT.NAME Like 'Electricity Go for More ___ %'
OR S_PROD_INT.NAME Like 'Electricity Mates Rates ___ %'
OR S_PROD_INT.NAME Like 'Electricity ___ Discount for Paying Your Bill by the Due Date'));
spool off
This is what one row looks like;
"1-UWLHY","Alpha Vic Kelly Kay","Product Switch-Electricity","Not Started","AMBASS_50REBATE","Go Green PKANY-Powercor","QEGS1","GG","QEGS1","GG","","6407421678","8","1-UWLI6","12-JUN-07","Electricity Mates Rates 7% Discount"
we want
"1-UWLHY","Alpha Vic Kelly Kay","Product Switch-Electricity","Not Started","AMBASS_50REBATE","Go Green PKANY-Powercor","QEGS1","GG","QEGS1","GG","","6407421678","8","1-UWLI6","12-JUN-07",'Electricity Mates Rates 7% Discount","Gas TRUenergy Business Edge 10% Discount","Electricity 3% Discount for Paying Your Bill by the Due Date"
I have tried to:
- create a cursor
- each column as - ie
S_PROD_INT.NAME as "EVD",
S_PROD_INT.NAME as "GVD",
S_PROD_INT.NAME as "PbDDD"
but when I try to use them in where "EVD" Like 'etc...'
error that table does not exist
I have tried also as
where 'EVD' Like 'etc...' -- error
where EVD Like 'etc...' -- error
- create them as %TYPE variable
- more
but keep getting errors
Any ideas and help will be most appreciated as I have tried and researched all I can think and get my hands on with my limited skills.
Thanks.
Regards, Steve

Unfortunately my skills are not high enough as I obviously don't know where to put the code exaclty.
I am first just running it on the top part of the script but get the error;
ORA-00900: invalid SQL statement
What I am running is; -- Commented
WITH s_prod_int AS
SELECT 1 row_id, 'Electricity Mates Rates 7% Discount' name FROM s_prod_int --these were 'FROM dual' originally, I changed to s_prod_int (Received same error regardless whether from dual or s_prod_int)
UNION ALL
SELECT 1, 'Gas TRUenergy Business Edge 10% Discount' FROM s_prod_int
UNION ALL
SELECT 1, 'Electricity 3% Discount for Paying Your Bill by the Due Date' FROM s_prod_int
SELECT DISTINCT '"'||
rtrim(ltrim(S_ORG_EXT.OU_NUM)) || '","' ||
rtrim(ltrim(S_ORG_EXT.NAME)) || '","' ||
rtrim(ltrim(S_EVT_ACT.TODO_CD)) || '","' ||
rtrim(ltrim(S_EVT_ACT.EVT_STAT_CD)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_SOURCE_TYPE)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_TXU_PRICELIST_NAME)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_CLASS_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_PEAKANYTIME_ELEC)) || '","' ||
rtrim(ltrim(S_PRI_LST.X_TXU_CISRATE_PA_CLASS_ELEC)) || '","' ||
rtrim(ltrim(S_ORG_EXT.X_OTH_ACCOUNT_NUMBER)) || '","' ||
rtrim(ltrim(S_ADDR_PER.X_NMI_NUM)) || '","' ||
rtrim(ltrim(S_ADDR_PER.X_NMI_CHECKSUM)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.QUOTE_NUM)) || '","' ||
rtrim(ltrim(S_DOC_QUOTE.X_COOLING_OFF_DATE)) || '","' ||
rtrim(ltrim(a.name)) ||'","'|| --I assume I am still able to right and left trim
rtrim(ltrim(b.name)) ||'","'||
rtrim(ltrim(c.name))||'"' name -- not sure what this name is here for (have ran with and without it here
FROM SIEBEL.S_ADDR_PER S_ADDR_PER,
SIEBEL.S_DOC_QUOTE S_DOC_QUOTE,
SIEBEL.S_EVT_ACT S_EVT_ACT,
SIEBEL.S_ORG_EXT S_ORG_EXT,
SIEBEL.S_PRI_LST S_PRI_LST,
s_prod_int a, -- I assume these needed to go in here
s_prod_int b,
s_prod_int c
SIEBEL.S_QUOTE_ITEM S_QUOTE_ITEM
WHERE S_EVT_ACT.TARGET_OU_ID = S_ORG_EXT.ROW_ID
AND S_DOC_QUOTE.ROW_ID = S_QUOTE_ITEM.SD_ID
AND S_ADDR_PER.ROW_ID = S_ORG_EXT.PR_ADDR_ID
AND S_PROD_INT.ROW_ID = S_QUOTE_ITEM.PROD_ID
AND S_ORG_EXT.ROW_ID = S_DOC_QUOTE.TARGET_OU_ID
AND S_DOC_QUOTE.PRI_LST_ID = S_PRI_LST.ROW_ID
AND S_EVT_ACT.TODO_CD = 'Product Switch-Electricity'
AND S_EVT_ACT.EVT_STAT_CD In ('In Progress','Not Started','On Hold')
AND S_DOC_QUOTE.STAT_CD In ('Completed','Verbal Acceptance','Written Acceptance')
AND S_DOC_QUOTE.X_OFFER_TYPE = 'Product Switch'
AND a.NAME LIKE 'Electricity TRUenergy Business Edge%' --Placed all the where part in the original where clause
OR a.NAME LIKE 'Electricity TRUenergy Business Now%'
OR a.NAME LIKE 'Electricity Go for More%'
OR a.NAME LIKE 'Electricity Mates Rates%'
AND a.row_id = b.row_id
AND (
b.NAME LIKE 'Gas TRUenergy Business Edge%'
OR b.NAME LIKE 'Gas TRUenergy Business Now%'
OR b.NAME LIKE 'Gas Go for More%'
OR b.NAME LIKE 'Gas Mates Rates%'
AND b.row_id = c.row_id
AND (
c.NAME LIKE '%Discount for Paying Your Bill by the Due Date'
NAME -- Not sure what this NAME is for - tried with and without - same error

Help needed on upgrading portal application from sp3 to weblogic portal 10

Hi Guys
I have an application which is currently running on BEA Weblogic Portal 8.1 sp3. We need to upgrade our application from 8.1 sp3 to BEA Weblogic 10 version.
(1) Is there any way for upgradation from 8.1 sp3 to portal 10 directly or do I need to upgrade it from sp3 to sp4 and then from sp4 to portal 10? Pls clarify?
(2) How reliable are the BEAs automated scripts for retaining the personalization/customization of my application on sp3 to upgraded version i.e portal 10?
(3) I believe, we do not need to do any coding/design changes/architectural changes into my application for this upgrade.
Any help on this will be highly appreciated
Thanks
Jameel

1) I believe only sp4 and later to weblogic 10 is supported (http://www.bea.com/content/news_events/white_papers/BEA_WL_Portal10_ds.pdf)
so yes i think you need to upgrade from sp3 to a later version of the service pack
2) You tell us :)
3) Depends on your application and the features you have used. E.g. I believe Content management has changed between sp3 and what 10 supports.
regards
deepak

Need some help trying to generate thumbnail images from large Jpegs

Hello,
I have some ActionScript 3.0 code, created with Flex that
will load a large JPEG image (say 3000x2000 pixels) that I'm trying
to create a 100 pixel thumbnail. I have the code working where I
generate the thumbnail, but it's not maintaining the aspect ratio
of the original image. It's making it square, filling in white for
the part that doesn't fit.
I've tried just setting the height or width of the new
image, but that doesnt render well, either.
To see what I'm talking about, I made a screen shot, showing
the before image, and the rendered as thumbnail image:
http://www.flickr.com/photos/taude/533544558/.
Now, there's a few things important to note. I'm saving the
thumbnail off as a JPEG. As you can see in my sample application,
the original renders fine with the proper aspect ratio, it's when
I'm copying the bytes off the bitmapdata object, where I need to
specify a width and height, that the trouble starts. I've also
tried using .contentHeight and .contentWidth and some division to
manually specify a new bitmapdatasize, but these values seem to
always have NaN.
private function makeThumbnail():void{
// create a thumbnail of 100x100 pixels of a large file
// What I want to create is a a thumbnail with the longest
size of the aspect
// ratio to be 100 pixels.
var img:Image = new Image();
//Add this event listener because we cant copy the
BitmapData from an
/// image until it is loaded.
img.addEventListener(FlexEvent.UPDATE_COMPLETE,
imageLoaded);
img.width=100;
img.height=100;
img.scaleContent=true;
img.visible = true;
// This is the image we want to make a thumbnail of.
img.load("file:///C:/T5.jpg");
img.id = "testImage";
this.addChildAt(img, 0);
private function imageLoaded(event:Event):void
// Grab the bitmap image from the Input Image and
var bmd:BitmapData =
getBitmapDataFromUIComponent(UIComponent(event.target));
//Render the new thumbnail in the UI to see what it looks
theImage.source = new Bitmap(bmd); //new Bitmap(bmd);
public static function
getBitmapDataFromUIComponent(component:UIComponent):BitmapData
var bmd:BitmapData = new
BitmapData(component.width,component.height );
bmd.draw(component);
return bmd;

Dev is 10gR2 and Prod is earlier version of Oracle, 10gR1.
The schema (or table(s)) export file created by Oracle Database Control in Oracle 10gR2 is not importable into 10gR1, by default.
Workaround.
Use the Schema (table(s) export wizard of in the Maintenance section
of the Oracle Database Control in ver 10R2,
but when you get to the end of the wizard (I recall Step 5),
show the data pump export source PL/SQL code, cut and past to editor,
and find the variable where you can set the Oracle database version
to your prod database version,
then run the script from the SQL Plus prompt in 10gR2 dev,
and this creates an Oracle 10gR1 compatible data export file.
Then go to Prod and run the schema (table(s)) import data wizard,
and import the export file. You will have to option to move the data
to another schema or tablespace if required.
Just to not run into troubles, I use the same schema and tablespace name
in both dev and prod.
the variable you must modify in the 10gR2 datapump export script looks like
h1 := dbms_datapump.open (operation => 'EXPORT', job_mode => 'SCHEMA', job_name => 'ExportTableToProdJob', version => 'COMPATIBLE');
and you must change manually to
h1 := dbms_datapump.open (operation => 'EXPORT', job_mode => 'SCHEMA', job_name => 'ExportTableToProdJob', version => '10.1.0.1');
This creates a 10g1.0.1 or later compatible export data file.
You must have read/write privileges to the folder were the export data file will be created, and imported from. (Oracle Directory Object)

Javascript array help needed to generate narrative from checkboxes

For context... the user will indicate symptoms in cardiovascular section, selecting "deny all", if none of the symptoms apply. The narrative sub-form needs to processes diagnosis sub-form and generate text that explains the symptoms in a narrative form. For example, if the user selects "deny all" in the cardiovascular section, the Cardiovascular System Review field would have: "The patient denies: High Blood Pressure, Low Blood Pressure. The logic associated with the narrative needs to account for "deny all" and all the variations of selections.
I have what I think is a pretty good start on the logic, but would like some help with the following:
1) loading selected fields into the cv_1s array
2) loading fields not selected into the cv_0s array
3) generating the narrative
See "phr.narrative.cv_nar::calculate - (JavaScript, client)" for the coding I've done thus far. Feel free to comment on any efficiency opportunities you see. I have a SAS programming background, but I'm new to Javascript. Thanks...
Rob

Hi Rob,
One approach would be to give your checkboxes the same name so they can then be referenced as a group and use the caption as the source of your text, so you shouldn't have to duplicate the text and will make it easier to add more later.
Attached is a sample doing that.
Hope it helps.
Bruce

Help needed to generate new target group for contacts from BP Target Group

In CRM 5.0, we have a functionality in which say we have created a target group (T1) for 10 BPu2019s (organization) and each of these BPu2019s have one or more contact persons associated to them. Now if I want to create a target group for all these contact persons associated to the 10 BPu2019s, in CRM 5.0 I have the option to right click on the target group (T1) and then I get an option u201C generate new target group from contactsu201D. By doing so another target group for all the contacts associated to those BPu2019s will be generated. I am not able to find out the similar option in CRM 2007 (web UI) where in I can create target group for contacts associated to BPu2019s (organization). There should be some work around for this requirement.
Please let me know how to achieve this requirement.
Thanks,
udaya

Hi udaya,
we're also using that functionality in CRM 5.0. I think it would be worth a combined OSS message to get this functionality back in standard if it isn't there.
Best regards
Gregor

What can be done to change screen colors from these pale blues & reds that i need to strain my eyes to see?

'''bold text'''

You can use the NoSquint extension to set a default font size and page zoom and colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Need to generate the payment from my credit card for adobe muse ... who can help me please

hello, a banking problem, my card has no funds when the automatic payment of adobe muse, and I resolved the problem and I want to pay now, can do I now ?

Hi Jhon,
Please contact the customer service team using this page here and get further assistance on this, Contact Customer Care
- Abhishek Maurya

16:9 Help needed. Workflow: extracted video from DVD, FCE HD edit & DVDSP.

Hi,
I have a project where according to the camera person it was shot in 16:9 with the camera (assuming a DV camcorder of some sort). It was captured from the camera and converted to a DVD (VIDEO_TS folder and everything) and sent to me for editing.
What I need help with is a workflow (and settings) to edit and output this properly.
1) My first hiccup comes in the extract. When I view the DVD that was sent to me, the video looks squished as it squeezes the video into the 4:3 aspect ratio. I was using MPEG Streamclip to extract it. I've extracted it in a 16:9 QT format and it looks fine in FCE HD. However, once I started reading more about editing 16:9 video in the FCE PDF manual, I'm wondering if I should have kept it as 4:3 and then toggled the Anamorphic setting for the sequence.
2) Once I have the correct source to edit - are there any considerations on export for compression? I read somewhere about a program to set the anamorpgic bit for iDVD, but plan to use DVDSP so I'm assuming I can skip this step. I also read in the forum about a QT Conversion setting to use. Do I need to? I was planning to export a reference movie and use Compressor with that. I was planning to use a "Widescreen" compressor option. Is this correct?
3) I know this is beyond this forum, but any advice on what settings should I use in producing the DVD? As noted above I plan to use DVDSP 3 to create the DVD, and I do notice the 16:9 settings in there for each track. I was planning to use the 16:9 Letterbox track setting. Is this correct?
Any other pitfalls I should be aware of as I navigate the 16:9 jungle?
Thanks in advance.
Sean
12 PB Rev C (1.33 GHz G4) & PowerMac G5 Dual 2.0 Mac OS X (10.4.7)

Chandan
First, with regard to your chipset - graphics/video card:
Mobile Intel® GM45 Express Chipset, featuring the Mobile Intel® Graphics Media Accelerator (GMA) 450...
Your graphics card has no video RAM (VRAM) of its own. So, it must use some of your system RAM to be able to function. This is 'dynamically allocated'. That is, your system decides how much system RAM to allocate to the graphics card. I am not aware of anyway to manually control this.
Next, you said you have installed Windows XP. Toshiba India has not posted any XP drivers for your system. Toshiba laptops are very finicky about using Toshiba 'tweaked' hardware drivers to be able to function properly. This computer is a Toshiba European version of your model, and it would appear to have a full set of XP drivers, these will work just fine in your system:
Satellite Pro C650 PSC11E Downloads
The order you load the hardware drivers and Toshiba utilities is critical. The files available for download above are all zip files, so you will have to extract the .exe files to be able to install them. Install the drivers first, then the Toshiba utilities, and given that you already have XP basically working install in this order:
1st Drivers:
1) Chipset
2) Storage Manager
3) Display
4) Sound
5) then all other XP hardware drivers
2nd Utilities:
1) Common modules
2) Hotkey utility
3) all other XP Toshiba utilities.
Good luck.
Mike

Help needed to report open orders from R/3 SD!

Hello all,
I need to report net open order value from SAP R/3 SD to BW. I'm using cube 0SD_C05 to report inquiry vs. quotation vs. orders. Is there any standard ods object in business content which can be used to report open orders? If not, will it be a good idea to create a ODS object and use it directly for reporting open orders? This BW installation is for a small IT company and we don't generate a lot of quotations or orders on a daily basis. Please guide.
Thanks and Regards,
Sumit

hi Sumit,
check if you can use 0SD_O01 - order item data
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/2b4f815f153014e10000000a114e5d/content.htm
other business content ods objects are 0sd_o02-05.
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/f5cc3c7dea9006e10000000a114084/frameset.htm
(expand left side 'ods')
hope this helps.

Help - Need to Get Max(Date) from An Unrelated Table in PowerPivot

I have two tables in my Power Pivot model:
Table A (a many table)
Asset
SerialNumber
User
CTUT111
YC112233
Bob
CTUT222
ZZ221144
Susy
CTUT222
ZZ221144
Larry
CTUT333
AB332244
Bob
Table B (a many table, a CSV import from another system)
Asset
SerialNumber
CheckIn_Date
CTUT111
YC112233
6/15/2014
CTUT111
YC112233
6/20/2014
CTUT222
ZZ221144
6/18/2014
CTUT333
AB332244
6/20/2014
I know it appears odd that Table B would have two entries for the same Asset (CTUT111), but it does.
I know I could write a SQL query that gave me the MAX(CheckIn_Date), but I’m not staging these datasets in a SQL server first.
I’m pulling directly from CSV tables.
I don’t want to have bridge tables either, if possible.
So, I’m left with a many-to-many situation in Power Pivot.
I want to add a Calculated Column to Table A, called ‘Latest CheckIn Date’ – which I get from Table B, matching on Serial Number.
So, when I’m done, I would expect the value for Asset=CTUT111 to be 6/20/2014 (since it’s the MAX of a value of dates)
I’m trying this pattern from Marco Russo in which you don’t need to relate two tables to exchange information, but it doesn’t appear to be working.
=CALCULATE (
MAX ( VALUES ( TableB[CheckIn_Date] ) ),
FILTER (
TableB,
'TableA'[SerialNumber]
= TableB[SerialNumber]
I’ve also tried to use LOOKUPVALUE, but I can’t seem to figure it out.
Would appreciate the help.
Thanks in advance.
-Eric

Hi Eric,
Please, try this one formula:
=CALCULATE (
MAXX ( VALUES( TableB[CheckIn_Date] ); TableB[CheckIn_Date] );
FILTER (
TableB;
'TableA'[SerialNumber] = TableB[SerialNumber]
P.S. In my locale I use ";". According to your locale you should use ",".
Truly yours,
Paul

Help! Need to generate a color from these settings

Similar Messages

Maybe you are looking for