Help! Need two profiles on an external hard drive for two ipods

Hi,
The issue is that I have a very outdated labtop with limited storage space. Wanting to expand my music collection, I downloaded music. However, I soon ran out of hard drive space so I purchased a large external hard drive. To add to the complication, I then purchased a new ipod. The problem is that I am unable to get itunes to work with this configuration. I contacted technical support but recieved no helpful advice.
So, my question to you is how do I recieve the intended results?
To clarify, I want the capability to have two seperate "profiles" of sorts, one for one ipod one for the other with the music stored on an external hard drive.
Any assistance you could offer would be GREATLY appreciated as this has caused nothing but problems.
Thank you in advance.

You don't have to use 2 profiles, I certainly don't.
But it's personal preference....here is an article on that
Using Multiple iPods With One Computer
I like method 2, because then you don't have to hassle with iTunes not dealing with Windows fast user switching properly.
Fast user switching in Windows XP is not supported

Similar Messages

Need advice on purchasing an external hard drive for video editing

Hi,
I looking for advice on which external hard drive to get. The main purpose for the hard drive will be storing video files on for use with Final Cut Pro. I have the 12 inch powerbook G4 so I plan to use the FireWire (400) port to connect the drive. I'm interested in getting comment from others who use their external hard drives for video editing.
Thanks!

Firstly your decision to use FireWire is a good one, as not only will it free up the USB it performs much better on sustained transfers.
That said you're still limited by the FireWire interface, so opt for a drive with a big cache (16MB would be good) and fast spindle speed (7200rpm+).
Some of the newer enclosures are compatible with SATA drives. While these are easier to install and theoretically will perform better, I'm not sure that the performance would justify the extra cost.
Matt

Is it possible to use Time Machine with an external hard drive for two separate computers?

I'm looking to purchase an external hard drive to use as with time machine as a backup for two separate computers. I'm not sure if I should buy 2 EHDs and dedicate one to each computer, or if Time Machine has the capacity to back up both computers separately. Anyone have any experience with this?
Thanks!

You can make two partitions on a single drive and dedicate one to each computer.
The pic is of a single external usb drive with three partitions( a Time Machine and two image backups) for two computers

External hard drive for two computers

I have two computers linked with Airport Express and am converting to Leopard. Can I back up both computers via Time Machine with one hard drive?

The Macbook Pro that is connected to the firewire drive saves its backup in a "Backups.backupdb" folder. The machines that connect over the network save their backups as sparse bundles that are mounted by the machines. I have never had a problem with two machines backing up at the same time. The caveat would be that the two networked machines do not have large changes, and so their backups are usually small.
I have restored from the backups to test the setup, and everything works fine... There is a lot of useful information on the forums about making this work, and steps to make it less painful for the initial backup.
Steve

I need to buy an external hard drive for my MacBook Air as it is almost full. Which one should I buy?

Do I need to buy an Apple external Hard Drive for my MacBook Air?

There is no such thing as an Apple hard drive, ...Apples doesnt make same.
avoid western digital if possible.
Yes, having an external HD is necessary for data backups and keeping large media files for packing around etc.
you need data redundancy.
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
Best small HD for the money:
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

What is the best external hard drive for backup on powerbook g4 17-inch?

i need to get a good external hard drive for backing up my files on my 2004 powerbook g4 17-inch. up till now ive been using thumbdrives, but i have way too much to backup now. i was thinking of getting the time capsule, but i don't have leopard version with time machine.
what would be an advisable backup to get without buying a new mactop yet?
please include model # if possible.
thanks in advance for anyone's input!

What I've done is buy the case and drive separately. The case I use is similar to this one: http://eshop.macsales.com/item/Other%20World%20Computing/MEFW91UAL1K/ (looks like they don't offer this case with Firewire 800 anymore), and the hard drive is a Western Digital 3.5" Parallel ATA 320GB which Newegg carries at http://www.newegg.com/Product/Product.aspx?Item=N82E16822136109. The reason I like a combination like this is that the enclosure uses the Oxford 911 chipset, and Oxford chipsets have a good track record working with our macs. The Western Digital drive comes with a 3 year warranty (many pre-packaged hard drives only have a one year warranty). It is very easy to install the drive ... you plug in the power and data connectors to the hard drive, and screw the hard drive to the case.
Whatever external hard drive you get, recommend one with a Firewire connection. Our Powerbooks can boot from a Firewire connection, however, cannot boot from a USB-only connection. Also, be aware that for a USB-only connection, if the external hard drive relies on power from it there may be a problem. This is due to the Powerbook putting minimal power out on USB. There are many people who have found that they've had to either get a dual USB cable, a USB powered hub, or an external power supply for their USB-powered external hard drive. The case I mentioned above has it's own external power supply. Firewire-powered drives don't have this problem.

HT201250 new external hard drive for Time Machine backup suggestions?

Ok, I have 3 external hard drives; unfortunately I've used them on my PC and they are read only on my iMac. So, I need to buy a new external hard drive for Time Machine backup. I'm a little confused; can I buy any EHD and them format it so Mac can use it or are there special EHD's I need to purchase?
Anyone have a particular EHD that is working well for you? Thanks, Blue

Bluehowler wrote:
Ok, I have 3 external hard drives; unfortunately I've used them on my PC and they are read only on my iMac. So, I need to buy a new external hard drive for Time Machine backup. I'm a little confused; can I buy any EHD and them format it so Mac can use it or are there special EHD's I need to purchase?
Anyone have a particular EHD that is working well for you? Thanks, Blue
Unless you need all three external drives for your PC, you can reformat in one of them in Mac OS Extended (Journaled) for use with Time Machine. However, since Time Machine backs up hourly, you'd need the external drive to be running constantly. That means ventilation of the drive becomes an issue since some, such as Seagate, can get very hot in their sealed enclosures. Some drive manufacturers try to get around this by spinning down the drive when not in use, but I've read complaints that that doesn't play well with a Mac. So whether you reuse one of your current externals or get a new one, it's a good idea to keep the drive's ventilation in mind.

What's the best external hard drive for iMac?

I'm very close to purchasing a 21" iMac. I've read about the 27" model problems, but nothing negative about the 21" model. Frankly, in the space I have, the 21" model will work just fine. I'll be replacing my MacBookPro laptop, which I will move to my work station at work, replacing my PC laptop (making totally Mac driven).
So anyway, I'm going to take the external hard drive I currently have at home and bring it to work also, leaving me with a need to purchase a new external hard drive for the new iMac. My question is: which external hard drive do you think is best to get. I'm getting at least 1T, and perhaps as much as 1.5T.
I've been reading about the Western Digital My Book for Mac, but there appears to be some new issues with the software and Snow Leopard. Anyone know anythign about this?
Also, some of the online descriptions indicate some hard drives need to be reformatted to work with Macs. Anyone know have any input on that? What about Seagate? Anyone have any experience with those?
Any input is greatly appreciated.

Most any drive will work with Macs, and Time Machine.
Most drives come formatted for Windoze, but most of them can be re-formatted on your Mac to work with it. See item #5 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
Also note item #1 there for size considerations; and items #3 and/or 4 for using with other data and/or other Macs.
If you think you ever might want to put a "bootable clone" on it, be sure it's a bootable drive. Most PPC Macs can boot only from FireWire; most Intels can boot from F/W or USB. But some Western Digitals won't boot a Mac. Their list of which ones should and +should not+ boot: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787. But note the disclaimer that they don't support it +*at all.+*.
In addition, many of them have a built-in sleep mode that cannot be disabled, and sometimes interferes with Time Machine backups: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1376
Depending on what ports you have, FireWire 800 is by far the fastest; FireWire 400 next, and USB slowest (F/W 400 and USB 2.0 are rated about the same for short bursts, but F/W is faster for sustained transfers. Also, your Mac's CPU has to do more of the work with USB, so actual throughput is usually less).
Many folks think USB is less reliable than FireWire. If you do get USB, be sure to connect it to a port on your Mac, not a keyboard (that may be only USB 1.0). Try to avoid hubs, too.
If you're using USB, it's usually best to get a drive with it's own power supply, as taking power from your Mac can be a marginal proposition. Portable FireWire drives without separate power supplies don't seem to have this problem.
Take any advice for or against particular makes or models with a grain of salt: all makers (of just about anything) can have a "run" of bad components, or a relatively few early failures. Plus, by the time any really good trends are noted, the model has probably been revised or replaced anyway!

Need help setting up Macbook Pro and external hard drive(s)

I apologize for the vague title but I was limited to so many characters.
Here's my situation (sorry for being verbose, I just want to be thorough)
Right now I have a Macbook Pro and a 500 GB external hard drive (Western Digital using USB 2.0 connection). I've outgrown the external hard drive and am ready to upgrade my external memory.
Here's my issues right now:
My iTunes library and music reside on the external hard drive. Using iTunes is painfully, I mean brutally, slow for some reason. For example: if I were to just change the genre of an average album, it takes upwards of 4 or 5 minutes to change the data. Compared to the POS Dell computer I used to run iTunes with (using the same external hard drive), the same task would take 5 seconds at the most. Likewise, if I try to watch a video that resides on that external hard drive right now, it skips and eventually stops because (presumably) the data is transferring extremely slowly. I have no idea, and haven't gotten any real answers, as to why this is happening with the Macbook and/or if using a Firewire connection would improve the speed.
Taking that into consideration, here's what I would like to do (and ask). I see myself having one 1T external hard drive for all my music and one 1T external hard drive for all my movies and videos. Ideally I would like to be able to access these two hard drives wirelessly with my Macbook and have it transfer the data very quickly - as it should IMO. Certainly a lot faster than it is now.
I would love to just be able to hook my Macbook up to my main stereo and run iTunes through it without having to lug around and messily connect the external hard drive which contains all the music. As well as being able to hook my Macbook up to the stereo and LCD monitor and be able to watch a video, again without the hassle of having to connect the external hard drive - which as I said prior, appears to transfer the data way too slowly anyway.
Any suggestions on what external hard drives I should get and any other hardware/software I need to run them wirelessly would be gratefully welcomed.
Thanks in advance (and I apologize for the long winded post)
MM

Obviously, FireWire is a fast connection, but for changing metadata, USB is plenty fast. Why it takes so long is anyones guess. Is it a USB 2.0 drive? Using external drives can be tricky. My father uses them for his gigantic library of almost 80,000 songs. When you have it setup properly, it works fine, but if you say forgot to have the external drive mounted when you launch iTunes, iTunes defaults the library back to your Music folder, then when you start importing, it puts in on the internal drive, then you have to go back and reset it, etc. Problem, with iTunes alone, you can only set one library, so if you want to use two drives, you will have to have one set at any given time.
So you could set the music one first, add to the library, then set it for movies, then add those to the library. Then keep the library set to the one you use most frequently, so you don't have to always switch. Once you import all media, and iTunes "knows" where to find the files, you can play them with no problems with two drives.
For wireless, you have a couple choices. If you have two Macs, you could keep one connected to the two drives, then with the other computer, just connect to the network and share the iTunes library so your other computer has access. If you want the music stored on a drive accessible wireless, you'll probably have to look to NAS, or some form of wireless storage. If you do that, their may even be a better third party software solution other than iTunes for managing multiple libraries.
This is something iTunes really needs. As libraries grow, one drive just isn't enough often.
Bryan

Two computers to one external hard drive problem, pram reset...

I have a Powerbook 15" 1.0 Ghz and recently I made the mistake of connecting one external hard drive to two computers. My OWC External hard drive was connected to my powerbook via firewire 800 and my PC via firewire 400 with both on. There is a tiny little blurb on the external hard drive's instructions that says do not connect to more than one computer at a time but of course I didn't see that until after the fact. My powerbook was painfully slow so I restarted but it wouldn't come back on. I was instructed to reset the pram, which I succesfully did but now the powerbook is so slow it is unuseable. The pc works fine. Did I do any permanent damage? Do I need to reinstall OSX or what? I will kill myself if I fried something on my powerbook. Please help!!

Disconnect all devices from your PowerBook as well as power and the battery for about 30 seconds. Put the battery and power back in/on and then reset both PRAM (3 consecutive times) and the PMU. Hopefull this'll bring it back to life.
Otherwise, create a new user account and see if things are better there. It is possible that you have damaged software rather than hardware so a clean instal may do the trick.

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

Running itunes on two pc's with external hard drive library

Hi All;
I am working with two laptop pc's, a large external hard drive and my iphone. I am in the process of putting my cd library onto an external hard drive and I plan on plugging the drive into either laptop to play my music library wirelessly using apple airplay. Both laptops are running windows 7 and I use the latest version of iTunes.
Initially, I transferred my music off my laptop onto the external drive (following the 'consolidate library' process provided in one of the help menus) and then successfully told iTunes where to find the library on my external hard drive (E:/itunes Music). I then did this with the 2nd laptop. Then I resumed downloading music from cd's.
All of my music is successfully saving to my external hard drive (E:). However, when I download on one laptop and then go to the other, I can't always see all of the albums. I got frustrated, started checking and unchecking things, now I'm sort of lost. iTunes has never been my favorite program.:/
My questions are below:
1. Can I use two laptops and my external hard drive interchangeably?
2. Right now, I get the message 'please choose an iTunes library' but when I direct it to the E: drive and click 'open' it keeps opening into my music files and doesn't open the program. If I try 'create library' I see this:
3. Now that there is a new library, I see this:
but previously I had it set to look like this:
My question is- should I have both boxes checked? Only the top one? What do they mean, anyway?
Ideas, suggestions and links welcome.
Thank you!

Making some assumptions:
The iTunes Library.itl file located at E:\iTunes Music\Music\iTunes 1 is your current/active database
When you run iTunes all your media files can be located and will play
You have free space on your external hard drive - at least as much as currently used for your E:\iTunes Music folder
If one or more of these are not valid, STOP HERE and report back - some parts of the procedure below would be different.
Before starting I would strongly suggest taking a backup of your E: drive as insurance against anything not working as it is supposed to.
Exit iTunes
Open Windows Explorer and navigate to drive E:
Select Organize > Folder and Search Options, then the View tab - make sure that the Show hidden files, folders and drives option is selected
Create a new folder E:\iTunes - this will be the new starting point for your iTunes library
Navigate to the folder where your library files are currently stored (E:\iTunes Music\Music\iTunes 1) - you've already provided a screenshot of this, but with the Show hidden files, folders and drives option selected you should see one more file:
(sentinel is a hidden file that iTunes uses while running).
Select all five files in this folder:
then right-click > Copy or press Ctrl-C.
Still in Windows Explorer, navigate to the E:\iTunes folder you created in step 4, then right-click > Paste or press Ctrl-V. At this point the E:\iTunes folder should look like this:
Now hold down the Shift key and start iTunes. You'll get this prompt:
Click on Choose Library..., navigate to E:\iTunes and select the iTunes Library.itl file (that you just copied into this folder). Click Open. iTunes will start and show your library with the same content as before.
Select Edit > Preferences > Advanced. Click the Reset button, which will change your iTunes Media folder location to E:\iTunes\iTunes Media, which is what you should want it to be (ignore the I: drive shown here, yours should be E:)
Click OK - you should get this prompt:
Click Yes. This doesn't actually move your files, there's one more step. Still in iTunes, select File > Library > Organize Library... When you see this prompt:
check the Consolidate Files box and - if not greyed out - the Reorganize files ... box. The click OK. iTunes will now start copying your media files to the new, preferred location and layout. The time taken to complete this process depends on the size of your library - for a small one it'll be a few minutes; for a large library considerably more. Allow the process to finish.
Once complete, your library in iTunes should look exactly as it was before - you should be able to select and play any of your songs/albums. However, if you right-click > Get Info on any song and select the File tab, you should see that the file location has been updated:
and if you go to Windows Explorer and navigate to E:\iTunes\iTunes Media you'll see a Music subfolder which in turn contains one folder for each artist:
In your case the drive reference at the top will be "My Passport (E:)" and the folders listed will be those for your library.
Successful completion of all these steps should now have brought your library into the "portable" or "well-formed" layout. Just to make sure everything's working:
Exit iTunes
In Windows Explorer, rename your E:\iTunes Music folder to something like "Old iTunes"
Restart iTunes, without holding down shift. Your library should be available to you as in step 11 above - however, its worth testing a significant sample of your music just to make sure that everything is in the right place and plays correctly.
One point I didn't cover is the case where the other (older) iTunes library you have - the one where the iTunes Library.itl file is on the C: drive - may be referencing albums/songs that were not in the library that was on the E: drive and that the procedure described above will bring into a more standard format. If this is the case then there are a couple of approaches that you can use to merge the two libraries - report back if this is the case.
If this last point doesn't apply, you can now go ahead and delete the renamed E:\iTunes Music folder - otherwise there will be a few more steps to go through before you can finally get rid of this.
Finally, once you've completed everything successfully, work out how you're going to create and maintain a backup of your library. With the approach described above all of iTunes' data is in one place - E:\iTunes. I would suggest using the method described in turingtest2's notes on Backup your iTunes for Windows library with SyncToy ... remembering that "Hard drives fail. Always. You just don't know when its going to happen."
Apologies for the length of these notes - however, based on your description of your current setup I thought it worth going through all the steps to bring it into a more conventional layout.

How to use one music library from one external hard drive on two different computers

I have 57 gigs of music in my itunes library on my laptop (Windows Vista). I backed up the library onto an external hard drive. I would like to play the music on a second computer (Windows XP) without putting the music on the second computer, just keeping it on the external hard drive.
I have the latest version of iTunes and Quicktime installed. In iTunes on both computers, under Advanced Preferences I changed the iTunes media folder location to the folder on the external hard drive and checked the boxes for "Keep iTunes media folder organized" and "copy files to iTunes media folder when adding to library". Also under the File tab, "Organize Library", I clicked on "Consolidate Files" and "Reorganize Files in the folder itunes music".
On the second computer I tried holding SHIFT while launching iTunes until the prompt appears asking to create a new library or point to an existing library. While attempting to point to the new location, I am only able to open the music folder, not set it as the location. In advanced preferences when I click "change" for the itunes media folder location, I can locate the folder but the only button I can click on is "open" or "cancel". "Open" will open the folder showing all my music. I tried typing in the location. It shows the correct location.
I was able to see the songs in the library in itunes on the second computer but it won't play the music. There are no exclamation points next to the songs. I am also able to see the playlists but there aren't any songs in the playlists.
There are no problems with itunes on the first computer. Everything works as it should.
Ideally I would like to use the same folder on the external hard drive for both computers if possible. But for now I want to at least get the music playing with the playlists on the second computer from the external hard drive.
Please help.

See this post on making a split library portable.
tt2

I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

dj_paige wrote:
however, I do point out that obtaining an additional hard drive and not throwing anything away seems a preferable solution to me.
heidie22, dj_paige has a very good point there. I would not through away the NEF files; I would archive them to a external drive.
By the way, I am assuming that converting RAW files to DNG is a decision you have made and not an accident.

Using same external hard drive with two Macs

I use two Lacie external hard drives and Time Machine to back-up my iMac, swapping over the drives each week to have one off-site.
I am soon to buy a MacBook. Can I use the same external hard drives for the MacBook's Time Machine back-ups, whilst continuing to use them with the iMac, or will that cause problems?
Thank you.

As Kappy says, Time Machine will put both sets of backups in the same Backups.backupdb folder. That may not be a good idea for the future; your best bet may be to partition the drive.
See #4 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

Help! Need two profiles on an external hard drive for two ipods

Similar Messages

Maybe you are looking for