HELP needed: Changing the username of the User profile for folders

HI all,
Would really appreciate if someone can help me figure out how to change the name of my username on the folder. Attached is the image to show what i mean. This is bugging me out!!
http://t.co/LAo4ZKS

http://support.apple.com/kb/ht1428
Note the note at the top of the page though. An alternative is to create a new account and copy your preferences across.

Similar Messages

  • How do I change the User Agent for Safari on my iPad?  I need this for a specific website for work.

    How do I change the user agent for Safari on my iPad?  I know how to do it on my desktop version, but I need it for my iPad.

    You can rename the iPad here:
    Settings - General - About - Name
    For Siri make sure he has himself as a contact in the Contacts app then:
    Settings - General - Siri - My Info and select his contact info

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • Help Needed : Changing the Color of Bar Graph Dynamically

    Hi..
    Is der any body to help me out...?
    My Question is :- How to change the color of Bar graph Dynamically..
    For example (Assume when one of the Bar Graph crosses certain limit of Y axis value mentioned, the graph must be changed into RED color)
    Thanks in Advance
    Edited by: user12873839 on Mar 30, 2010 10:03 PM

    Manoj,
    You have to create the entire chart manually. follow the below steps. You can refer to the anychart website for more help on different tags and features.
    1. Enter the following code in the html header of the page
    <script src="#WORKSPACE_IMAGES#AnyChart.js"  type="text/javascript" > </script>2. Create an ON Demand Application process by going to the Home>Application Builder>Application #>Shared Components>Application Processes
    3. Click On Create
    4. Enter the name as DYNAMIC_BAR_GRAPH_CHART
    5. Select the processing point as On Demand
    6. Click on Nxt
    7. Enter the following code in the processing text
    DECLARE
    BEGIN
    OWA_UTIL.mime_header ('text/xml', FALSE);
    OWA_UTIL.http_header_close;
    HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
    HTP.p ('<anychart>');
         HTP.p ('<settings>');
              HTP.p ('<animation enabled="True"/>');
         HTP.p ('</settings>');
      HTP.p ('<charts>');
       HTP.p ('<chart plot_type="CategorizedVertical">');
         HTP.p ('<data_plot_settings default_series_type="Bar">');
              HTP.p ('<bar_series>');
                        HTP.p ('<tooltip_settings enabled="True">');
                        HTP.p ('<position valign="Top" halign="Right"/>');
                        HTP.p ('<format> Name: {%Name}');
                        HTP.p ( 'Value : ${%YValue}{numDecimals:0}');
                        HTP.p ('</format>');
                        HTP.p ('<font bold="false"/>'); 
                        HTP.p ('<background>');
                        HTP.p ('<corners type="Rounded" all="3"/>');
                        HTP.p ('<border type="Solid" color="DarkColor(%Color)" thickness="2"/>');
                        HTP.p ('</background>');
                   HTP.p ('</tooltip_settings>');
              HTP.p ('</bar_series>');
         HTP.p ('</data_plot_settings>');
         HTP.p ('<data>');
              HTP.p ('<series name="series 1">');
               FOR cThis IN (select table2.name, table2.value
                                  from table1,table2,table3
                                  where table1.T1ID = table3.T3ID
                                  and table2.T3ID = table3.T3ID
                                  and table3.C_ID=1
                                  and table3.A_ID=1
                        ORDER BY table2.name )
              LOOP
                   IF cThis.value > 90 THEN
                        HTP.p ('<point name="' || cThis.name || '" y="'|| cThis.value || '" color="red"/>');
                    ELSE
                        HTP.p ('<point name="' || cThis.name || '" y="'|| cThis.value || '" />');
                   END IF;
              END LOOP;
              HTP.p ('</series>');
         HTP.p ('</data>');
         HTP.p ('<chart_settings>');
              HTP.p ('<title>');
                   HTP.p ('<text>Chart Title</text>');
              HTP.p ('</title>');
              HTP.p ('<axes>');
                   HTP.p ('<y_axis>');
                        HTP.p ('<title>');
                             HTP.p ('<text>Value</text> ');
                        HTP.p ('</title>');
                        HTP.p ('<labels>');
                             HTP.p ('<format>${%Value}{numDecimals:0}</format>');
                        HTP.p ('</labels>');
                   HTP.p ('<axis_markers>');
                   HTP.p ('</axis_markers>');
                   HTP.p ('</y_axis>');
                   HTP.p ('<x_axis position="Normal" align="inside">');
                   HTP.p ('<labels display_mode="Rotated" rotation="90" align="inside" />');
                   HTP.p ('<title>');
                        HTP.p ('<text>Name</text> ');
                   HTP.p ('</title>');
                   HTP.p ('</x_axis>');
              HTP.p (' </axes>');
         HTP.p ('</chart_settings>');
        HTP.p ('</chart>');
      HTP.p ('</charts>');
    HTP.p ('</anychart>');
    htmldb_application.g_unrecoverable_error := true;
    END;8. Click on Create Process
    Now we will create a html region to display the graph.
    9. Create a new region of type HTML on the same page and select the region template as no template.
    10. Enter the following code in the region source
    &lt;div id="DynamicaBarGraph"></div>
    &lt;script type="text/javascript" language="javascript">
    function DynamicaBarGraph()
    var DynamicaBarGraph = new AnyChart('/i/flashchart/swf/AnyChart.swf');
    //    DynamicaBarGraph.width = "400";
    //    DynamicaBarGraph.height = "400";
    DynamicaBarGraph.addEventListener('pointClick', onDynamicaBarGraphClick);
        var DynamicaBarGraphData = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=DYNAMIC_BAR_GRAPH_CHART',0);
        gReturn = DynamicaBarGraphData.get();
        DynamicaBarGraph.setData(gReturn);
        DynamicaBarGraph.write("DynamicaBarGraph");
    function onDynamicaBarGraphClick(e)
    // Read point name
         name=e.data.Name;
    // Read point value
         value=e.data.YValue;
    // You can add onclick even here using the values name and value
    DynamicaBarGraph();
    </script> Hope it helps. Thanks.
    Regards,
    Manish

  • Need help with changing the product name for a HP LaserJet Pro 401n to use on a ePrint network.

    I am in a school environment, naming printers is imortant. 
    Bonjour Service Name and Device Description name have been changed. IOS7 devices see the Bonjour name but ChromeBooks see the Product name. How can I change the Product name on the printer so that it is then recognized by HP Connected and shown to ChromeBook devices?

    You should be able to change the product name in Google Cloud.  The ChromeBook uses Google Cloud to print (Google Cloud uses HP ePrint).  Log into your google account and change the printer name there.
    I am an HP employee.
    Opinions expressed are mine and do not necessarily reflect the opinions of HP.
    Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

  • Help needed regarding the deployment architecture for PROD env

    Dear All,
    Please help me with some clarifications regarding the deployment architecture for PROD env.
    As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
    Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
    1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
    2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
    12.1.1 is installed in RHEL 5.3
    Thanks and Regards

    Hi,
    Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
    For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
    Regards,
    Hussein

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Need urgent help on how to compare the user profile and process form attributes

    Hi All,
    We have a requirement  where after editing the  user profile attributes we have to compare the currently modified user  profile attributes and the existing     
    process form attributes and based on the differences we have to update the  process form accordingly.
    We have around 80 attributes so we cannot follow the procedure where
    we update the lookup process_triggers
    and add the "change attribute" task
    and "update attribute" taskin the process definition
    because it creates aroung 160 tasks in process definition. So we are doing it by writing a custom code. Is there any other simple way to do it or any API"s which can help us.
    Need very quick help.Thanks in advance.
    Regards,
    Geetha

    Check MOS: 1595938.1
    -Bikash

  • Need log of the users who changed the partner profiles.

    Hi,
    Some user has been changed partner profiles of the CUA configuration Setup.
    It is displaying only Agent Name. They delete the Inbound and outbound parameters of the partner profiles created by CUA. So, I need to trace out the user who changed these parameters.
    It will be appreciate if anybody can help in this issue.
    Thanks,
    Shiva.

    I resolved this issue by deleting the partner profiles created by CUA in all child clients. And delete the Distribution model in all child clients and re-distribute the distribution model from Master client.
    Now its working fine.
    But I am not able to trace out the user who changed partner profiles. I checked in ST03N but i didnt get the information abt the we20. ( I am using ECC 6.0 version).
    And in WE20 it is not showing any User ID who changed the partner profiles. I checked in following tables but I didnt find any changed details of partner profiles.
    EDIPHO
    EDMSG
    EDP12
    EDP13
    EDP21
    EDPP1
    T002T
    T005T
    Regards,
    shiva.

  • My icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID.  If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done?

    Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done? His phone was stollen once last month need to get this done ASAP to prevent future headaches. Ty

    You can not change the date of birth on the account. Apple makes that clear up front when the account is created.
    The only way to "fix" this is going to be for him to create a new account with the correct information. Any apps purchased with the old one will need to be re-purchased with the new account. They can not be transferred.

  • Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

    Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

    computerilliterate52 wrote:
    hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
    Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
    Good luck!

  • Change the User ID running the SunOne Directory Server 6.3 on Windows 2003

    Hi Experts,
    I have an install of SunOne Directory Server Enterprise edition 6.3 running on Windows 2003 server. It was installed using the Zip distribution and is running as a user ID in the Active Directory the server is part of. We are trying to change the user ID to a service account (not the current ID which belongs to a person), so that the Sun DS can run as a service within Windows 2003 server. Need help in doing this without having to re-install the Directory server. Has anyone done this and is it possible to do?

    Thank you very much for the insights and the responses sharmy28.
    Appreciate it very much.
    All I had to do was change the setting in this file only:
    Open the file dsee6/cacao_2/etc/cacao/instances/default/private/cacao.properties and change the below line with new id...
    # Define username and groupname for cacao process
    process.username=sunadmin
    process.groupname=sungroup
    As this is Windows 2003 and the installs are all default values, I had to reboot the server for the change to take effect.
    The file dsee6/cacao_2/usr/lib/cacao/lib/tools/scripts/globals.cfg does not exist. However the same file exists under the perl directory as globals.pl and the settings you specified are present there. In our case these were commented out and so I left them as is.
    Thanks once again for your responses which helped me solve the issue we had.
    Thanks.

  • How do you change the user for Home Sharing on the Apple TV?

    I need to change the user on the Apple TV for Home Sharing but can't figure how or where to do it in the Apple TV settings. Can anyone help? Thank you.

    I bought my ATV at the Apple store Zurich Switzerland.  All the movies default to German. I hired a US movie and pressed and held the play/pause button once the movie had started but only the chapter menu displayed and there were no options to change the language (from the default German to English)
    Are all movies flagged on Swiss accounts only available in German? Is there a way of pointing my ATV to a different server.
    BR

Maybe you are looking for