Help needed for new (and confused) BT Infinity cus...

Hi,
I upgraded to BT infinity from the normal broadband 3 days ago after being told on the phone my speeds would increase to 38mpbs on the download and the upload would rise up to 10mbps. I have waited the recommended 3 days stabilisation period and currently the download speed is around 17mbps and the upload is barely 1.5mbps. I have tried various methods to try and fix this but with no joy, any help or advice would be greatly, oh so greatly appreciated.
Thanks

Can you post your line stats from the HH5 please? These are in Troubleshooting/Helpdesk on the web interface at http://192.168.1.254
Lines 1-13 will be enough
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

6110 Help needed for new maps!

Hello,
I have a 6110 Nav with pre-loaded, maps of Greece and the Balkans on the supplied 512mb card, but I need maps of Italy, France, Germany, UK as well. Is there a package you would recommend I download from Nokia or Route66 for this need? How do I do this??
Also, I have a new 1 Gig MicroSD card, will I need a bigger one?
Lastly, Will I still be able to use my maps for Greece and Balkans if I download additional maps?
Thank you in advance,
Jasvox

it IS true. the maps are there. install route 66 sync software (delivered with your mobile phone on a dvd), it will ask for an update, install that, select in the route 66 sync software "r66 store", select maps, go to europe, and there you get the "Western Europe" map (costs 99,99 euro, 1,64gb, withouth nordics!) or "Western Europe with Nordics (also costs of 99,99euro, 1,78gb, with nordics). so better get with nordics. you will need at least 2gb card anyway...
but currently route 66 got problems, as they did not link the maps correctly last friday. the "Western Europe with Nordics" is in fact the map without nordics (1,64gb, download interrupted at 92-94%), not clear yet what the map "Western Europe (without nordics)" really is.
as western europe with or without nordics does NOT include greece and baltics, you may also need to get that map, or it may work with your old map together (therefore, i guess you need a card larger than 2gb, or you get western europe without nordics, i do not know the size of the greece/baltics map). but that may fit on a 2 gb card. cards of size up to 8gb are supported (and more)
anyway, to make those maps work, you need to update your mobile phone to firmware 4.22.
guess route66 will fix those wrong linked maps soon.
Message Edited by laxlex on 04-Feb-2008 10:11 AM

Some help needed for improrting and editing

Hi,
I need a litle help with two issues.
1) I was trying to edit a photo but when i click the edit button, I can see the photo at the top of the screen in the film strip but not in the edit screen and I have also noticed for this particular picture I cannot view it in full zoom. All I can see is an " ! " mark.
2) I deleted this picture and tried to import again but iphoto states that it cannot import because it already exists. I tried closed the program, deleting the cache.

Derek
It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
iPhoto is a database and like any database it needs you to manipulate the data via the app itself, and not via a back door. So, that's why it thinks the pic is still there - because the entry in the database is still there.
The correct way to remove a pic is to move it to the iPhoto trash and empty the iPhoto trash. This will remove the pic from the database and the HD.
Now your database base is bunged up you have two choices: one is to return things precisely the way they were the other is to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Assuming you renamed a file to make it easier to find:
There are three ways (at least) to get files from the iPhoto Window.
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser. Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

Help needed for new project

Dear members
I am looking for a developer who can help me (rebuild) and
administrative back-end based on an existing MS SQL database in
either PHP or ASP classic.
I am pretty much a novice, more a designer than a programmer
but know my way around DW and some ASP code, I am new to PHP. I do
have experience with building databases, not much however with
building databases for e-commerce purposes.
I purchased WebAssist E-Commerce Suite if someone knows what
it is and work with DW MX 2004 on a Windows XP Professional SP2 m
achine.
I am not asking for free help but help me get the job done.
There is a time frame and the money I can spent on help is not
unlimited.
Pref. someone in Europe who I can keep in contact with via
MSN Messenger and/or Skype.
I can build myself the insert, update and delete pages on
various tables.
However certain things are unclear to me wether they are
absolutely a nescessity or can be done without.
Please if you have the time and not looking for a fast buck..
contact me.
Yours sincerely
Anthony

Hi,
I did a project on jsp and EJB called Dataminig implemented in Online shopping. Dataminig is an upcomming technology for Customer Relationship management. You can also do some kinda project like online patient monitering. In this project you can even see how to communicate through COM port.

Help needed for storing and sorting objects.

Hello
I have an assignment and it is to create a guessing game, here is the question,
In this assignment you are to write a game where a user or the computer is to guess a random
number between 1 and 1000. The program should for example read a guess from the keyboard, and
print whether the guess was too high, too low or correct. When the user has guessed the correct
number, the program is to print the number of guesses made.
The project must contain a class called Game, which has only one public method. The method must
be called start(), and, when run it starts the game. The game continues until the user chooses to
quit, either at the end of a game by answering no to the question or by typing 'quit' instead of a
guess. After each game has been played, the program is to ask the user for a name and insert this
together with the number of guesses into a high score list. When a game is started the program
should print the entire high score list, which must be sorted with the least number of guesses first
and the most last. Note, the list must be kept as long as the game-object is alive!
each score also
consists of the game time. In case there are two high scores with the same number of guesses, the
game time should decide which is better. The game time starts when the first guess is entered and
stops when the correct guess has been made. There should also be input checks in the program so
that it is impossible to input something wrong, i.e. it should be impossible to write an non-numeric
value then we are guessing a number, the only allowed answers for a yes/no question is yes or no,
every other input should yield an error message an the question should be printed again.
I understand how to code most of it, except I am not sure how to store the playerName, playerScore, playerTime and then sort that accordingly.
I came across hashmaps, but that wont work as the data values can be the same for score.
Is it only one object of lets say a highScore class, and each time the game finishes, it enters the values into an arrayList, I still dont understand how I can sort the array all at once.
Should it be sorted once for score, then another array created and sorted again, I dont get it I am confused.
Please help clarify this.

Implode wrote:
We had the arrayList/collections lecture today.
I asked the teacher about sorting objects and he started explaining hashmaps and then he mentioned another thing which we will only be learning next term, I'm sure we must only use what we have learned.
How exactly can this be done. I have asked a few questions in the post already.
ThanksWell, there was probably a gap in the communication. Hash maps (or hash tables, etc.) are instance of Map. Those are used to locate a value by its unique key. Generally, to speed up access, you implement a hashing function (this will be explained hopefully in class). Think of name-value pairs that are stored where the name is unique.
Contrast this with items that are sorted. Any List can be sorted because its elements are ordered. An ArrayList is ordered, generally, by the order you inserted the elements. However, any List can be given its own ordering via Comparable or Comparator. You can't do this with an ordinary Map. The purpose of a Map is speedy access to the name-value pairs, not sorting. The List likewise has different purposes, advantages, disadvantages, etc. List can be sorted.
A Map is generally similar to a Set. A Set is a vanilla collection that guarnatees uniqueness of each element (note, not name-value pairs, but simple elements). There is one concrete class of Map that can be sorted, TreeMap, but I doubt your professor was referring to that. The values or the keys can be returned from the Map and sorted separately, but again, I doubt he was referring to that.
Take a look at the Collections tutorial here on this site or Google one. It is fairly straightforward. Just keep in mind that things (generally) break down into Set, Map and List. There are combinations of these and different flavors (e.g., Queue, LinkedHashMap, etc.) But if you can learn how those three differ, you will go a long way towards understanding collections.
(Oh, and be sure to study up on iterators.)
- Saish

Career Help Needed for me and my wife..your suggestion would surely help!

Hi Guys,
I would really appreciate if you can solve our mid career Dilemma. Me and my wife both want to get in to SAP..Kindly suggest which module should we pick..
My Wife's Profile: She is an Economics honors graduate and an MBA too. she has got 7 years banking exp in two of the biggest Pvt sector Banks in India. Kindly Suggest which module would be in line with her domain Experience, she wants to get in to the functional side of SAP using the domain knowledge..
My Profile: I am a Science graduate and MCSE, have got 7 yrs exp in Sales and Business Development, should I opt for SD, CRM or HR? Though I am more keen on SD or CRM, but I mentioned HR as I have been doing Business development in staffing industry for the last 4 yrs now..
I am sure I would get the best advise in here..Also, do let us know the future prospects it will/may add..
Look forward to your suggestions..
Thanks!
Rohit
Edited by: Rohitgulati on Feb 7, 2012 9:11 PM

Hi Leon,
Thanks for your quick revert, but just wondering if Banking domain is good for FI/Co, as I guess it has more to do with Finance and not Retail Banking, I in the mean time searched another Module for Banking Industry called IS- Banking..I think, this module will be in line with the Banking Exp but whats the demand of this module in Banking sector that has to be seen!!
Thanks for your help!
Rohit

Help needed for Audigy and Audigy 2

Hi, I got a set of Audigy Platinum EX and I have a Audigy 2 ZS. Can I use the external I/o part of Audigy Platinum EX on Audigy 2 ZS?Thanks

Remember you pay your carrier every month for them to provide you with a quality service.
contact them again, and ask them to provision your account correctly.
Once that is done, go here and create a new BIS account.
https://bis.eu.blackberry.com/html?brand=tesco
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Help needed for Validating and Redireting website form

Hello
I know that this is probably a beginners question, but I
can't seem to figure it out. Yes I am rookie.
I want my form to validate itselves and if it was successful
to redirect to a website that was selected by the client from a
drop-down menu in the form.
I have tried to use a jumpmenu but the problem is that it
redirects the webbsite the moment the client makes a selection.
e.g.
Client select between three options
Yahoo
Google
Vista
Client enters details
Name
E-Mail
Then submit form. If above entered detailed was validated
simply as e.g. for containing an e-mail address the form should
then redirect to user choice.
I prefer to use a Javascript is possible.
Thank you
David

I would probably advise server side code to accomplish this
.. in whatever
server model you use.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"DavidLeRoux" <[email protected]> wrote in
message
news:fsj53v$55d$[email protected]..
> Hello
>
> I know that this is probably a beginners question, but I
can't seem to
> figure
> it out. Yes I am rookie.
>
> I want my form to validate itselves and if it was
successful to redirect
> to a
> website that was selected by the client from a drop-down
menu in the form.
>
> I have tried to use a jumpmenu but the problem is that
it redirects the
> webbsite the moment the client makes a selection.
>
> e.g.
>
> Client select between three options
> Yahoo
> Google
> Vista
>
> Client enters details
> Name
> E-Mail
>
> Then submit form. If above entered detailed was
validated simply as e.g.
> for
> containing an e-mail address the form should then
redirect to user choice.
> I prefer to use a Javascript is possible.
>
> Thank you
>
> David
>

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Help needed with header and upload onto business catalyst

Can someone help with a problem over a header please?
I have inserted a rectangle with a jpeg image in background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
That's one problem.
The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
Can anyone help ? Thanks.

Thanks for replying,
How can I check the preview in other browsers before I publish a provisional site with BC?
The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
I’m a novice with Muse with an ambitious site !
Thanks for your help.
Mary Featherstone
Envoyé depuis Courrier Windows
De : Sanjit_Das
Envoyé : vendredi 14 février 2014 22:15
À : MFeatherstone
Re: Help needed with header and upload onto business catalyst
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi
Answering the questions :
- Have you checked the preview in Muse and also in other browsers ?
- Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
- In design view the rectangle is set to 100% browser width ?
With publishing :
- Please try to rename the image file and then relink
- If it happens with other images as well , see if all the image names includes strange characters or spaces.
- Try again to publish
With e-mail from BC :
- Under preferences , please check the country selected.
- If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Help need for force to signout All session ! how...

hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

HT5622 How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

Use cached exchange mode for new and existing outlook profiles

Hi, I've noticed a difference in the behavior of this setting in Outlook 2010 vs 2013
In 2010, when the gpo is set, everything is greyed out for the user, but in 2013, the user can change the setting. Has anyone else noticed this? Is this something that MS decided to change or a bug?
I'll attach screenshots of the settings and the end result later.
joeblow

Hi,
à
In 2010, when the gpo is set, everything is greyed out for the user, but in 2013, the user can change the setting.
Based on your description, I understand that “Use Cached Exchange Mode” will gray out in Outlook 2010 when
set "Use Cached Exchange Mode for new and existing Outlook profiles".
However, in Outlook 2013, you will still be able to check “Use Cached Exchange Mode”. If anything I misunderstand, please don’t hesitate to let me know.
Just my guess, Office 2013 Administrative Templates may be a little difference with Office 2010 Administrative
Templates. On current situation, I suggest that you would post the question in
Office Forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu

Help Document for Keyfigures and Characteristics

Hello,
Using BEx Browser I'm generating reports so i need to create help documents for Keyfigues and characteristics that way user will know by looking documentation they will know what is what
How can we create help documentation?
Experts help would be appreciated
Thanks

actually we are using BI7.0 version but we don't have portal and web that is the reason we are using old BEx browser for front end but ETL we are using BI7.0.
so using old BEx browser can we create documentation for keyfigures or not?
if so How?
Thanks

Help needed for new (and confused) BT Infinity cus...

Similar Messages

Maybe you are looking for