Help needed for print layout action.

Hello, I have a set of 300 or so photos I need to print at work. I work on a large lazer photographic processor capable of doing 50 inch wide prints by however long I need. I would like to set up an action to layout these photos on a page so that I dont have to copy and paste each one on a page by hand.
The photos are all the same size. Basically I want to do what contact sheet automation does however I need it to be the full size of the photos not just thumbnails. Just set a document size and have it layout the photos on it untill they are done then I can rip it and print it from my printer. If anyone could help or point me in the right direction that would be great.

I would use InDesign for this.
Make your sheet size, then load the place cursor with as many images that fit on a page.
now just place the images the way you want them.
Print.

Similar Messages

Help needed for printing a box!

The box I want to print has an irregular shape. How do I put these 3mm for cutting around it?

Use the offset path function

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help need for force to signout All session ! how...

hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

2 Layout's for 2 screens different F4 Help needed for same program

Hi Friends,
I have 2 layouts in the selection screen the first layout is for screen 1 and the second layout is for screen 2.
I save the layouts when I run the report.
Now when I do F4 Help for the first layout it shows me all the layouts available for the program and the same thing
for Second layout too.
Is there a way for the first layout I need to get only the layouts for the first screen when I hit the F4 button
and for the second layout I need to get only the layouts for the second screen when I hit the F4 button. in order to choose
I am using REUSE_ALV_VARIANT_F4 and passing report name to is_variant and i_save = 'X'.
Thanks,
chaithanya.

I think this is not possible.
Variant names get stored on Report Name as key.
a®

Help needed in printing pc to pc (printer) using bluetooth

I require to create a application in final year in which i have to print from my pc to another persons pc who has a printer attached (both pcs are bluetooth enabled using bluetooth dongles using Microsoft stack)
Do i have to use java rmi ??
How do i implement this ?? plz i need help !!!

Adrian, the GIMP Print drivers might have been
installed automatically when Tiger was installed on
your computer. They are for older model printers
whose own drivers aren't native for Tiger. They
might interfere with a printer's own driver from the
printer maker.
I think you may have supplied a link to the Epson incompatibility before spacesuiter. Could you please refresh my memory. I seem to recall the problem was a color shift that was noted on the higher end Epson printers. I have heard of no other specific problems associated with any manufacturer's drivers and any third party drivers including the Gutenprint drivers. I will say that the Epson drivers seemed flawed. They cannot see my SP 1280 if I have my Epson SC 800 attached with a parallel to USB adapter -- even an Epson adapter. That is not a problem with the Gutenprint drivers. As soon as I unplug the SC 800, the SP 1280 functions fine with the Epson drivers.
In Adrian's case, it appears to me that there is no provision in the Canon PPD for printing black. This is more than a color shift problem. The PPD for the BJC-2100 included with the Gutenprint drivers does contain provisions for Grayscale and Black(inverted grayscale) printing.
Matt

Help needed in printing interactive form

Hi Friends
I just developed an application which access ECC
can any one guide me to print the output pdfform
i have opened result interactive form and placed a print button ...next which script i should use? formcalc or
java script..since my application is a java webdynpro .
can you give me the piece of code for that..formcalc
already got the script..but i dont know the exact java script for printing.
plz help me in this issue
vivek chandra

Hi Raja
Thanks for that stuff..very helpful
i have 3 inputfields on one of my interactive form
i was asked to fill those fileds with predefined data
so that once the app is run, input form fields should
dispaly the predefiend values.in wdinit method i could
do that using wdContext.currentelement.setName("xxx");
i have 3 fields..three are text fields.from the third field need to eneter the date,its a PO Bapi..i did context binding ..i could drag the input fields..
but when iam trying to set predefiend date for the
3rd field..its not accepting it..since it is of type
date.. do i need to create any data type for the 3rd field in javadictionary????plz guide me in this issue
regards
vivek chandra

Help need for Dunning letter (F150)

Hi Experts
I have a problem with dunning letter
In level 1 only the client needs Two tables data , In table one i need to print the over due items only and in table two i need to display all items(it may overdue or not) in main window.
In debug i have find PRINT_DUNNING_NOTICE (FM is triggring).
i have printed the table one data by using the text elements 530 - Line item heading , 531-- Line item line layout ,
My question is how to print the Table two data, i didnt find other text elements for solving the problem.
in this case what needs to be done, can we create the same text elements like 530 & 531 & 581 & 582.
Thanks in advance
suresh

Hi
I got the Result by doing the below process..
Dunning outputs use the function module FI_DUNNING_PRINT_NOTICE. You can copy this to a Z function module and make some changes to the data selection. You will have to look into the code and decide what changes you need.
The process to use a bespoke program to do the dunning print is as follows:
UNDER FI GLOBAL SETTINGS in the configuration,
There are Business Transaction Events. Within that you can configure the same to enable a Z function module in place of the standard function module (from the FUNCTION GROUP F150)
u2022 Create function group ZFTP_F150
u2022 Copy standard function module FI_PRINT_DUNNING_NOTICE of function group F150 to ZFTP_FI_PRINT_DUNNING_NOTICE in function group ZFTP_F150
u2022 Copy standard function module PRINT_DUNNING_NOTICE of function group F150 to ZFTP_PRINT_DUNNING_NOTICE in function group ZFTP_F150
u2022 Within the function module ZFTP_FI_PRINT_DUNNING_NOTICE, change function module call for PRINT_DUNNING_NOTICE to ZFTP_PRINT_DUNNING_NOTICE
u2022 Create a new include ZFTPI_ROUTINES within the function group and copy the subroutines LOG_MSG, LOG_MSG_TAB, & LOG_SYMSG from the function group F150 to this include
AS AN ALTERNATE, YOU CAN COPY THE WHOLE FUNCTION GROUP
u2022 Maintenance view TBE31 (SM30). Change the function module from FI_PRINT_DUNNING_NOTICE to ZFTP_FI_PRINT_DUNNING_NOTICE against the event 00001720 FI-FI entry

DW8 for Print Layout?

Recently we created a newsletter for e-mailing and posting on
our site. This month, we would like to use the HTML document and
manipulate it so we can adapt it for a print layout.
For example, we would add page breaks, adjust margins, remove
or modify print headers, etc., building upon the DW8 HTML instead
of ripping out the HTML and starting over from scratch which would
require repeating all that design work in a print layout program.
Is there such a tool/plug-in out there?
Thanks.

If I may chime in and make some suggestion or comment along
with other participants & et. al., do some tweaking with CSS
and test on every web browsers.
Please understand that we sometimes don't have control over
the kinds of printers, because there are plenty of different types
of printers - laser printer, color laser or inkjet printers or
pretty darn old-fashioned dox-martix printers.
I believe that you can use your judgement and commonsense
with that approach by tweaking with CSS around HTML and do some
through testing with different browsers.
Hope that helps.
Cheers, Brian
[On edit, additional note...] When you say if there is a
plug-in, well here is what I think Adobe Reader (PDF reader) --
usually most computers are installed with Adobe Reader plug-in on
many systems.
The alternative approach is to design a simple PDF document,
where you have the control of layout and such. Try to keep the size
small as much as possible so it can be downloaded very fast. But I
don't think that is what you are looking at, though.
If you go with this alternative approach, you might want to
offer a link in your email and let the customers or clients to
download the PDF file that way. I don't know. You decide.

Help Needed on Printing

Hello im a very new junior sd consultant and I have gotten my first issue ticket which I need to try and resolve. Basically, the client has an issue when they want to print the 1.Sales Return document and its 2.Delivery document. they have to keep manually choosing the printer. How can I configure the printer settings for the returns document and its delivery so that for each new sales return document the default printer is already chosen and all they have to do is press enter for example and it prints.
The current scenerio is that for example, sales return document 000000001. In va02 on the initial screen if you go to sales document, then issue output to. I get this popup when I do those steps "No output has been selected for printing". The client then has to go and assign the printer manually for each document which takes up too much time. How can the printer be assigned by default to that document type?
Thanks in advance

Hi Muhammad,
Please maintain the condition records to that output condition types in VV11 transaction for sales orders and VV21 for delivery document output.
In condition record itself you can maintain the printer.
If you maintain the data in the condition record output will come automatically while creating order or while creating delivery.
I hope it will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Jul 8, 2008 10:24 AM

Help reqd for printing the word text into two lines(AMOUNT in Rupees)

Hi all,
Im working for cheque printing and in the Amount in words column....im getting the text in a single line...as i've made it as in my script.
(im moving the rate in to amount thru FM "HR_IN_CHG_INR_WRDS"....
and it displaying into a single line....)
But in every bank cheque...we have only a limit space for the first line and balance words should come in to the next line....How to achieve this in my form print.(when im giving the cheque(laser print) inside the printer for print)...
*******FYI..
now im getting it as
RUPEES Ninety Seven Thousand Thirty seven and four paise only.(its going out in my cheque as it's coming in a single line,going beyond the words column)
the above one...i want to print it as two lines as like in normal cheque...
what condition i've to give and how to split the text or make it to continue in the second line....
Pls do the needful with any examples or any coding.....
help needed
thanks & regards
sankar

hi Nehal,
the below one is my coding part........FYI
DATA AMT LIKE REGUD-WAERS.
data: words(120) type c,AMOUNT(120).
data: ant like PC207-betrg,t like reguh-vblnr,t1 type int4.
FORM WORDS TABLES intab
STRUCTURE itcsy outtab
STRUCTURE itcsy.
READ TABLE intab INDEX 1.
   t   = intab-value.
select single RWBTR from reguh into ant where vblnr eq t.
ant = ant * ( -1 ).
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
AMT_IN_NUM               = ant
IMPORTING
AMT_IN_WORDS             = words.
amount = words.
READ TABLE outtab INDEX 1.
MOVE WORDS TO outtab-value.
MODIFY outtab INDEX 1.
ENDFORM.                    "diff
with the above code,im getting the amount field in a single line and it goes out beyond the line specified.
How to split it as a length basis as u said....pls explain in detail...
thanks & regards
sankar

Query help needed for querybuilder to use with lcm cli

Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
Missy

Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Help needed for print layout action.

Similar Messages

Maybe you are looking for