DW8 for Print Layout?

Recently we created a newsletter for e-mailing and posting on
our site. This month, we would like to use the HTML document and
manipulate it so we can adapt it for a print layout.
For example, we would add page breaks, adjust margins, remove
or modify print headers, etc., building upon the DW8 HTML instead
of ripping out the HTML and starting over from scratch which would
require repeating all that design work in a print layout program.
Is there such a tool/plug-in out there?
Thanks.

If I may chime in and make some suggestion or comment along
with other participants & et. al., do some tweaking with CSS
and test on every web browsers.
Please understand that we sometimes don't have control over
the kinds of printers, because there are plenty of different types
of printers - laser printer, color laser or inkjet printers or
pretty darn old-fashioned dox-martix printers.
I believe that you can use your judgement and commonsense
with that approach by tweaking with CSS around HTML and do some
through testing with different browsers.
Hope that helps.
Cheers, Brian
[On edit, additional note...] When you say if there is a
plug-in, well here is what I think Adobe Reader (PDF reader) --
usually most computers are installed with Adobe Reader plug-in on
many systems.
The alternative approach is to design a simple PDF document,
where you have the control of layout and such. Try to keep the size
small as much as possible so it can be downloaded very fast. But I
don't think that is what you are looking at, though.
If you go with this alternative approach, you might want to
offer a link in your email and let the customers or clients to
download the PDF file that way. I don't know. You decide.

Similar Messages

Help needed for print layout action.

Hello, I have a set of 300 or so photos I need to print at work. I work on a large lazer photographic processor capable of doing 50 inch wide prints by however long I need. I would like to set up an action to layout these photos on a page so that I dont have to copy and paste each one on a page by hand.
The photos are all the same size. Basically I want to do what contact sheet automation does however I need it to be the full size of the photos not just thumbnails. Just set a document size and have it layout the photos on it untill they are done then I can rip it and print it from my printer. If anyone could help or point me in the right direction that would be great.

I would use InDesign for this.
Make your sheet size, then load the place cursor with as many images that fit on a page.
now just place the images the way you want them.
Print.

How to create subtotal in every invoice page for print layout design

Dear Experts,
How can I create subtotal column for every page if having more than one page of items in my invoice?
Thanks!

Hi,
It works, but the sub total keep accumulating for pages before. and the subtotal for the last page is the equal to the grand total already. How do I control to just have the subtotal for every single page?
Please help. Thanks!

Print layout designer for develop report based on query

Dear Experts/Gurus,
I am amazing about the manage previous reconciliation report. When I opened it using print layout designer, it looks like the report is not built using query, but I am not sure yet. This is very confusing. I created query similar with manage previous reconciliation (MPR), but when I link the query to print layout and try to make similar format/appearance with MPR report (reconciliation management (system)), it is not success.
Isn't the MPR report built not based on query ? I appreciate your answer. TIA
Rgds,

Hi,
I am not sure I understand what's the problem:
Is it the layout that is different or the data?
Regarding the data you can use SQL Profiler (maybe you did?) to find out what queries are fired, but please note that there are some stored procedures in the DB that are used for some specific functions - not sure whether the "MPR" uses any of these.
Then you must include some non-default filter in SQL Profiler...
...but you can also use the logging functionality in B1 for that purpose:
Just activate the logging (see the "log" folder in the B1 subdirectory) in the corresponding config file: choose the option to have the SQLs logged in conjunction with the logging being triggered in all cases (not just error).
Thus you will get all the SQLs - just plain - from the B1 application, but note that it will obviously slow it down!
HTH,
Frank

Print Layout Designer - Different Variable No for Different Currencies

Hi Experts,
I will need your support once again.I just noticed that the Withholding tax field on the Invoice print layout displays only when the transaction is in Local currency,while trying to trouble shoot this issue, I discovered that the Variable Number for the withholding Tax field for transactions in Local currency differ from that of USD transactions.
I need this field to display irrespective of the currency, how can I achieve this? Can I get a comon variable number for that field ?
Any info will be highly appreciated.
Kind Regards

Hi Chike,
The answer is no. You can not change them because they hold different values. If you want to use one PLD to print both LC and FC, you have to use many formula fields to do so.
Thanks,
Gordon

Print layout for reports

Dear All,
In the Print layout of Customer Receivables Aging Report i.e Collection Report (System) of SAP B1 8.8 Version Patch 14, all the field areas are given as free text at the document level. Can anyone please let me know, how is it possible?
Thanks & Regards,
Sunitha

Hai Rahul & Gordon,
Thank you for your Information.
Rahul,
I tried using system variable, but still i couldn't do it.
Actually in the Collection Report (Customer Receiveables - Aging) i would like to add a column of original amount in the document level of PLD, even when i define it as system variable,i am not getting the output.
Thanks & Regards,
Sunitha

Print Layout Designer for UDO

Hi,
Can we design report with print layout designer for UDO forms?
If yes, how do we accomplish this?
If not, is there any other alternative?
I am using 2004B. Thanks.

I use the iTextSharp project to create PDF's (http://itextsharp.sourceforge.net/)... its free and it works (A little hard to use, but it works). A more simple PDF-project are SharpPDF (http://sharppdf.sourceforge.net/). This is also free and very easy to use, but not that many features.

Print layout - Goods issue & Issue for Production

I designed two print layouts separately 1 in Goods issue for Goods issue in inventory module
and 1 in Issue for production for Issue for production in production module.
If i take a print preview or print in Issue for production , it will reflects the print layout designed in Goods issue.
regards
kavitha S

Hi Kavitha,
I think, are you duplicate the Goods issue PLD Template to Issue for Production PLD Template on Duplicate Layout Template.
Best, Try to create a New PLD from Issue for Production(System) PLD.
Regards,
Madhan.

How to Extract Data from IT 0025 and Modify the layout for Printing

Hi All,
Query----> My client has a requirement to output the appraisal data in a given format from IT 0025. (The entire appraisal done for the employee)
I would like to know from where this data will be picked up is this data stored in some cluster table and how can we change the layout for printing in the desired format?
Note: PA and PD is Integrated. When we create appraisal in IT 0025 no record gets created in PA0025, in which table does the record gets created and how to retrieve the data?

hello,
normally stored in pa0025.
are you using the old or new appraisal system?
if you are using the new one. its not stored in pa0025 it is done with relationships..
regards
stefan

Ask Print Layout Designer for customize report

Dear all
I am newbie in SAP, and i must create report with PLD like :
PAYMENT TYPE          AMOUNT
By CASH
Cash               1000
Cash               2000
Cash               3000
Cash               4000
Total Cash          10000
By CREDIT
Credit               10000
Credit               15000
Credit               17500
Total Credit          42500
By TRANSFER
Transfer          20000
Transfer          25000
Total Transfer          45000
Total Payment          97500
From database example:
PAYMENT TYPE          AMOUNT
Cash               1000
Cash               2000
Credit               10000
Cash               3000
Cash               4000
Credit               15000
Transfer          20000
Credit               17500
Transfer          25000
Right Now,I just can create report like this :
PAYMENT TYPE          AMOUNT
Cash               1000
Cash               2000
Cash               3000
Cash               4000
Credit               10000
Credit               15000
Credit               17500
Transfer          20000
Transfer          25000
Total Payment          97500
Please help me.. because i very need it.
Thankyou so much for your help
Regards,
Dony
Edited by: dony donse on Dec 18, 2007 4:29 AM
Edited by: dony donse on Dec 18, 2007 4:38 AM

Finnaly...
someone send me PLD manual
And my problem solved
==============
Procedure
After defining the sort, perform the following steps
1. From the menu bar choose Print Layout Designer → Group.
2. Select a group number.
3. Select 1 for a sub-sort or sub-total for the primary sort, select 2 for the secondary sort and so on.
Each group is linked to its relevant row number in the Sort window described above. Thus, every field created in a certain group relates only to its group's corresponding row in the Sort window.
The Repetitive Area Header titles are now hidden as well as any field created in the Repetitive Area Footer. The reason is that these two areas are linked to groups. Each one of the groups has two areas of its own.
4. To define the sub-sort, do the following:
a. In the Repetitive Area Header assign a title for the required sort.
b. Create a new Formula field
c. Choose the Formula Editor button and select the operand SortValue() in the Operation field.
This action will print the Items table divided into separate titles each time the Item number changes.
5. To define sub-totals do the following:
a. In the Repetitive Area Footer create a Formula field.
b. Choose the Formula Editor pushbutton and select the operand ColSum(UniqueID as String) in the Operation field (for the Quantity field from the rows in the Sales Quotation).
The field within the brackets defines the column for which a total will be calculated. You can also calculate totals for the Price and Total columns.

Layout for printing a book?

Does a page ordering template exist for Pages for printing a book with two pages per side of 8X10 in. paper (printing both sides) so that the pages will be ordered correctly when the sheets are stacked, folded and stapled? I want to publish poetry chapbooks using ten to twelve sheets of paper. I realize I shall need to trim the edge opposite the fold once folded. Or, is there a better way?

Welcome to Apple Discussions
This is one of the frequent answers I post. There are a few ways to do this. The first two involve setting your Pages document in File > Page Setup… to landscape orientation. I originally wrote this for Pages 2. In Pages 3, use the page layout mode for #s 1a & 1b.
1a - Use linked text boxes. This is easier done with the layout showing. First you need to add a page break to have two pages. Click in the body area & then Insert > Page Break. Now click outside the layout area to enter object mode & click the "T" in the tool bar or Insert > Text to create a text box & type something in it. This is to keep the box from disappearing if you click elsewhere & the text can be replaced later. If you already have some text to paste in you can just paste while in object mode & a text box containing your text will be created. You will now need to click outside the layout again & drag the cursor toward the text box to select it. You can now position the first text box in the lower right of your 2-page document. It is easier to see where it goes if you have the document set up with 2 columns. Click on the blue-outlined tab at the lower right of the text box to create a new of the same size & move the box to the upper left. Repeat for a box for the upper right & again for the lower right. You will now have 4 linked text boxes.
1b - Start as in 1a creating a 2-page document with 2 columns in landscape orientation. For this one you will use the body text area. Just type or paste your text in as normal, starting in the upper left. When you have your text done, cut all of the text in the first column (upper left), insert a column break after the last character on the now lower left column & paste the cut text after it in the now lower right column.
Neither one of these will let you automatically use page numbers because Pages "sees" each page & you actually have 2 pages per page.
2 - Use Cocoa Booklet to create a booklet with any number of pages (best in a multiple of 4). Start with your Pages document in Legal size & larger than normal font size. Export the Pages document to a PDF & then drag the PDF to the icon of Cocoa Booklet. It will create a new PDF in booklet form.

Create template for query print layout

Hello
I see there are 2 templates in the querry print layout but I do not want to use one of the existing templates.
I need to copy a query print layout I've made from one query to others queries, is it possible to copy the first print layout as a template to be used for all other queries?
Thank you

Hi,
Unfortunately it is not possible, the layouts are unique per query. You need to use the system template whenever you create a new query print layout.
Regards,
Nat

Authorization for "Select Layout and Print"

I am using Business One 8.8 PL 18. The option under the File menu for "Select Layout and Print" is available for super-users and some other users. We want it to be available for all users. What authorization setting controls this function? Thanks.
Marcia

Under "General" section, assign "Full Authorization" rights to "Print Layout Designer"
George

100% view for print docs but not for web based layouts?

Why do documents view at the correct on screen size when set at 100% for print documents but to view a document at the right pixel size for web it's more like 66.4%?
Thanks

In CS6 if you double-click the Zoom tool you'll get the 1:1 monitor to pixel ratio, which is the same as Photoshop's and earlier ID version's 100% view.
You can also go back to the earlier functionality via scripting, see this thread for scripts:
http://forums.adobe.com/message/4502849#4502849

Dunning Report Print Layout Issue

Hi
I have a problem with the Dunning Report Print layout (Dunning All (system)). In the wizard I select all the Invoices (Which are over due and current) for the BP and sent to printer.
In the print out all the due dates are mixed with the acctual Due dates.
Acctuall Invoices
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     25.02.08              1
10002                     03.03.08              1
10003                     03.04.08              0
Print out
Doc No.                  DOC Due            Level
======================================
10000                     05.11.07              2
10001                     03.03.08              1
10002                     03.04.08              0
10003                     25.02.08              1
How can I fix this. This is coming from the System template and we havent change anything.
Could you please help me.
Thanks
Sanjaya

Hi
I solved the problem. But the issue was when i ran the dunning wizard the layouts messed up. For example if I had a dunning letter with 3 lines (overdue documents). The last line would copy itself 4-6 times (it would show the last document 4-6times so the total lines in the dunning letter would be 7-9 lines). But I solve the issue. Somehow the attention person (which I got from the contact persons (ocrp) and not from the document contact person (oinv) ) did the issue. When i switch it to the oinv the issue was gone.
kind regards
Søren
Edited by: Bundgaard Søren Hollænder on Jan 26, 2009 9:56 AM

DW8 for Print Layout?

Similar Messages

Maybe you are looking for