Help needed on where install program places UPK Library

I installed UPK Developer (Version 11.1) on my laptop in order to get familiar with it before an upcoming project. However, I cannot get past the Add Profile dialog box as I don't know where the Install program placed the Library on my computer. Any help would be appreciated. Thanks.

Do you remember if you installed UPK as a single user or multi-user configuration? The multi-user setup requires the pathname to a library on an external server when you launch UPK. You might want to reinstall UPK and make sure you chose the single user option. I'm not 100% sure, but it sounds like that might be the issue.

Similar Messages

  • We need smarter written install programs!!!

    In this age of small SSD boot drives, we need much smarter install programs, One of my pet peeves is the manufactures that send out to the public unpartitioned drives. There should always be a "C" (system) and a "D" (data) partition. At any rate the install program should only install the programs system requirements on the "C" drive and give you an option of which drive to place the rest of the installed files. It does not take more than 10 minutes to add the option to the install program. (I've done it). Come on installer writers, don't be so lazy.
    Paul

    Hi Wolfgang,
    As per my understanding you should be able to deploy your non-SAP application on the PI 7.0 without any issues. Please try to use SDM / JSPM to deploy your application. Also, the NW database itself would be used in turn.
    Regarding license, a temporary license is active right after installation. In case a permanent license is required, please http://service.sap.com/licensekeys
    Regards
    Srikishan

  • Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks  My name is :- Osama Rezk   I'm From :- Egypt

    Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks My name is :- Osama Rezk I'm From :- Egypt my icloud ID
    <Email Edited by Host>

    You will only be able to track your iPad if you have find my iPhone active and the iPad is connected to a network.
    Take a look at this link, http://support.apple.com/kb/PH2580

  • Help need on ALV Report Program

    Hi all.....
    im facing problem in the following code....it shows 'No records found' (as same as my coding generated)whenever i give wrong vendor no:(lifnr), but if i gives the correct one(as in table lfa1)...it shows Runtime error as <b>"the occupied line length in the program text must not exceed the width of the internal table"</b>..
    pls verify...
    just go thru my code and revert me the feedback of what i did wrong and pls i dont want any example codes from u guys since i've seen so much and couldnt solve it with that...
    hope u understand......what i need
    Rewards based on the above reuirements....only
    *******************************CODING***********************************************
    REPORT ZALV_MERGE.
    TABLES:lfa1.
    DATA:BEGIN OF itab OCCURS 100,
    lifnr LIKE lfa1-lifnr,
    land1 LIKE lfa1-land1,
    name1 LIKE lfa1-name1,
    ort01 LIKE lfa1-ort01,
    regio LIKE lfa1-regio,
    sortl LIKE lfa1-sortl,
    END OF itab.
    data: i_repid like sy-repid,
          i_tabix like sy-tabix.
    TYPE-POOLS: slis.
    DATA: fcat TYPE slis_t_fieldcat_alv.
    SELECT-OPTIONS: LIFNR FOR LFA1-LIFNR.
    SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE itab WHERE lifnr IN LIFNR.
    clear i_tabix.
    describe table itab lines i_tabix.
    if i_tabix lt 1.
    write:/ 'No materials found'.
    exit.
    endif.
    i_repid = sy-repid.
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
       I_PROGRAM_NAME               = i_repid
       I_INTERNAL_TABNAME           = 'ITAB'
      I_STRUCTURE_NAME             =
      I_CLIENT_NEVER_DISPLAY       = 'X'
      I_INCLNAME                   = I_REPID
      I_BYPASSING_BUFFER           =
      I_BUFFER_ACTIVE              =
      CHANGING
        CT_FIELDCAT                  = fcat
      EXCEPTIONS
       INCONSISTENT_INTERFACE       = 1
       PROGRAM_ERROR                = 2
       OTHERS                       = 3.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
       I_CALLBACK_PROGRAM             = i_repid
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = ' '
       I_STRUCTURE_NAME               = 'ITAB'
      IS_LAYOUT                      =
       IT_FIELDCAT                    = fcat
       I_SAVE                         = 'A'
      TABLES
        T_OUTTAB                       = ITAB
    EXCEPTIONS
       PROGRAM_ERROR                  = 1
       OTHERS                         = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

    Hi,
    think inthis program in the function module REUSE_ALV_FIELDCATALOG_MERGE
    in exporting parameter you are using -->
    I_INTERNAL_TABNAME = <itab_name>
    this <itab_name> is not like any physical structure .So make a structure through SE11 like <itab_name>.
    u have to create a structure in SE11 with the fields, and then pass that structure into the REUSE_ALV_FIELDCATALOG_MERGE , in the parameter
    I_internal_tabname = ' structure name '.
    even though u create a structure, u need to pass it to the table parameter.
    then it will work.
    Otherwise manually build the fieldcatalog.
    find the following code as an example.
    DATA : l_pos TYPE i VALUE 1.
      ist_fieldcat-fieldname = 'POSID'.
      ist_fieldcat-tabname   = 'IT_FINAL'.
      ist_fieldcat-outputlen = 24.
      ist_fieldcat-col_pos   = l_pos.
    ist_fieldcat-ddictxt = 'L'.
      ist_fieldcat-key = 'X'.
      ist_fieldcat-seltext_l = 'Appropriation Request Number'.
      APPEND ist_fieldcat.
      CLEAR ist_fieldcat.
      l_pos = l_pos + 1.
      ist_fieldcat-fieldname = 'TXT04'.
      ist_fieldcat-tabname   = 'IT_FINAL'.
      ist_fieldcat-outputlen = 4.
      ist_fieldcat-col_pos   = l_pos.
      ist_fieldcat-ddictxt = 'L'.
    ist_fieldcat-key = 'X'.
      ist_fieldcat-seltext_l = 'Status'.
      ist_fieldcat-EMPHASIZE = 'C400'.
      APPEND ist_fieldcat.
      CLEAR ist_fieldcat.
      l_pos = l_pos + 1.
      ist_fieldcat-fieldname = 'UDATE'.
      ist_fieldcat-tabname   = 'IT_FINAL'.
      ist_fieldcat-outputlen = 8.
      ist_fieldcat-col_pos   = l_pos.
      ist_fieldcat-ddictxt = 'L'.
      ist_fieldcat-key = 'X'.
      ist_fieldcat-seltext_l = 'Status Date'.
    IST_FIELDCAT-EMPHASIZE = 'C600'.
      APPEND ist_fieldcat.
      CLEAR ist_fieldcat.
    <i><b>Reward point if find helpful
    Debjani</b></i>

  • I need to re install programs that I already purchased.

    They were lost when I had to reset my computer that crashed.  I need to get these installed asap.

    If you identify the programs and the versions it might be possible to help you.

  • Help needed in Logical Database Programming

    Hello Gurus,
    I am working on a Report on ASSET ACTIVITY BY DATE RANGE .
    The program is copied from std. program S_ALR_87011990.
    The above std. program displays for the whole financial year. This is modified for a particalar period range in the new leveraged program.
    My question is in the below code.
    We are fetching data using LDB ADA. The statement "GET anlcv" works fine here, I mean Sy-subrc is 0 and anlcv structure has some data in it.
    When it comes to statement "GET anepv" in the below code, we are not getting any data into that structure and sy-subrc NE 0. Then it is skipping all the get statements and directly going to statement " PERFORM abga_simulieren.".
    My logic lies in between this Get statement and the perform statement. When i see it in debugging mode my statement is not executed at all.
    What needs to be done. Please anyone help me.
    GET anlcv.
    CHECK select-options.
    MOVE anlcv TO sav_anlcv.
    GET anepv.
    CHECK select-options.
    Nur Bewegungen des Jahres des Berichtsdatums durchlassen.
    CHECK anepv-bzdat GE sav_gjbeg.
    CHECK anepv-bzdat IN so_bzdat. "Added for SIR-3132
    Bewegungen in SAV_ANEPV sammeln.
    MOVE anepv TO sav_anepv.
    APPEND sav_anepv.
    GET anlb LATE.
    Check auf Bestandskonto bei Gruppensummen erst hier, wegen
    fehlender Abgänge/Umbuchungen
    IF NOT summb IS INITIAL.
    IF NOT anlav-ktansw IN so_ktanw.
    REJECT 'ANLAV'.
    ENDIF.
    ENDIF.
    ANLCV aus Save-Area zurueckholen.
    CHECK NOT sav_anlcv-anln1 IS INITIAL.
    MOVE sav_anlcv TO anlcv.
    Abg-Simu: Abgang simulieren.
    PERFORM abga_simulieren.
    Promise to reward points
    Regards
    Mac

    1) delete line  CHECK anepv-bzdat ge sav_gjbeg.
    2) test with an asset , which has movements (purchases) in your intervall so_bzdat.
    otherwise post a movement (e.g. transaction type 100) with tcode abzon
    A.

  • Help neede in changing standard program CN41

    Dear all,
    I am working on a requirement in PS module.
    The requirement is I need to copy the standard program RCNST000 of CN41 and I need to add some extra fields.
    Here in initial display project object, project object.
    when I select duration and Order cost plan 000 from the list It will display duration and order cost plan in the report.
    My requirement is when they select that I need to display cost per day and cost for currect month.
    Can anybody help me.
    Thnaks and regards
    Anil

    Dear all,
    I am working on a requirement in PS module.
    The requirement is I need to copy the standard program RCNST000 of CN41 and I need to add some extra fields.
    Here in initial display project object, project object.
    when I select duration and Order cost plan 000 from the list It will display duration and order cost plan in the report.
    My requirement is when they select that I need to display cost per day and cost for currect month.
    Can anybody help me.
    Thnaks and regards
    Anil

  • Error Messages "Printer needs to be installed" "Program Error"

    I've been printing all day and now am getting a message that I can't print unless I install a printer. I have uninstalled and reinstalled printer to no avail. I have also uninstalled Photoshop CS4 and reinstalled it. I am getting the same message. I am able to print from other programs (Word) but not photoshop. What do I need to do next?

    Linda,
    There are
    always preferences saved. No way around that; there's always a full set of preferences saved, even if they're just the defaults. And preference files can get corrupted any time.
    See the FAQs of this forum if you don't know how to trash your preferences.

  • Help needed, new to java programming

    hi,
    I have craeted a Frame with some check boxes and button called "button1".
    Can anyone tell me how can i count the number of CHECKED check boxes so that when i press the button1 in my code it should display the result as number of checked check boxes divided by total number of check boxes. It should display the result in a textfield here RESULT textfield in my code
    Thanks in advance ...i am sending the code i have written so far....
    public class Frame extends java.awt.Frame {
        /** Creates new form Frame */
        public Frame() {
            initComponents();
            setSize(600, 600);
        /** This method is called from within the constructor to
         * initialize the form.
         * WARNING: Do NOT modify this code. The content of this method is
         * always regenerated by the Form Editor.
        private void initComponents() {
            buttonGroup1 = new javax.swing.ButtonGroup();
            checkbox1 = new java.awt.Checkbox();
            checkbox2 = new java.awt.Checkbox();
            checkbox3 = new java.awt.Checkbox();
            button1 = new java.awt.Button();
            textField1 = new java.awt.TextField();
            setLayout(null);
            addWindowListener(new java.awt.event.WindowAdapter() {
                public void windowClosing(java.awt.event.WindowEvent evt) {
                    exitForm(evt);
            checkbox1.setLabel("checkbox1");
            add(checkbox1);
            checkbox1.setBounds(160, 50, 84, 20);
            checkbox2.setLabel("checkbox2");
            add(checkbox2);
            checkbox2.setBounds(160, 70, 84, 20);
            checkbox3.setLabel("checkbox3");
            add(checkbox3);
            checkbox3.setBounds(160, 90, 84, 20);
            button1.setLabel("button1");
            button1.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    button1ActionPerformed(evt);
            add(button1);
            button1.setBounds(150, 180, 57, 24);
            textField1.setText("Result");
            textField1.setName("Result");
            add(textField1);
            textField1.setBounds(260, 180, 44, 20);
            pack();
        private void button1ActionPerformed(java.awt.event.ActionEvent evt) {
            // Add your handling code here:
        /** Exit the Application */
        private void exitForm(java.awt.event.WindowEvent evt) {
            System.exit(0);
         * @param args the command line arguments
        public static void main(String args[]) {
            new Frame().show();
        // Variables declaration - do not modify
        private java.awt.Button button1;
        private javax.swing.ButtonGroup buttonGroup1;
        private java.awt.Checkbox checkbox1;
        private java.awt.Checkbox checkbox2;
        private java.awt.Checkbox checkbox3;
        private java.awt.TextField textField1;
        // End of variables declaration
    }

    Two problems in the code you repost-ed:
    1. It lacks import statements.
    2. There is an extraneous } at the end of the button1ActionPerformed method.
    Correct them and it'll work fine. Posting the full source code:
    import java.awt.Component;
    import java.awt.Checkbox;
    public class Frame extends java.awt.Frame
         /** Creates new form Frame */
         public Frame()
              initComponents();
          * This method is called from within the constructor to initialize the form.
          * WARNING: Do NOT modify this code. The content of this method is always
          * regenerated by the Form Editor.
         private void initComponents()
              checkbox1 = new java.awt.Checkbox();
              checkbox2 = new java.awt.Checkbox();
              checkbox3 = new java.awt.Checkbox();
              button1 = new java.awt.Button();
              textField1 = new java.awt.TextField();
              setLayout( null );
              addWindowListener( new java.awt.event.WindowAdapter()
                   public void windowClosing( java.awt.event.WindowEvent evt )
                        exitForm( evt );
              checkbox1.setLabel( "checkbox1" );
              add( checkbox1 );
              checkbox1.setBounds( 120, 40, 84, 20 );
              checkbox2.setLabel( "checkbox2" );
              add( checkbox2 );
              checkbox2.setBounds( 120, 60, 84, 20 );
              checkbox3.setLabel( "checkbox3" );
              add( checkbox3 );
              checkbox3.setBounds( 120, 80, 84, 20 );
              button1.setLabel( "button1" );
              button1.addActionListener( new java.awt.event.ActionListener()
                   public void actionPerformed( java.awt.event.ActionEvent evt )
                        button1ActionPerformed( evt );
              add( button1 );
              button1.setBounds( 50, 170, 57, 24 );
              textField1.setText( "textField1" );
              add( textField1 );
              textField1.setBounds( 240, 170, 60, 20 );
              pack();
         private void button1ActionPerformed( java.awt.event.ActionEvent evt )
              // Add your handling code here:
              Component[] components = getComponents();
              int numOfCheckBoxes = 0;
              int numChecked = 0;
              for ( int i = 0; i < components.length; i++ )
                   if ( components[i] instanceof Checkbox )
                        numOfCheckBoxes++;
                        Checkbox checkBox = (Checkbox) components;
                        if ( checkBox.getState() )
                             numChecked++;
              double ratio = (double) numChecked / (double) numOfCheckBoxes;
              textField1.setText( Double.toString( ratio ) );
         /** Exit the Application */
         private void exitForm( java.awt.event.WindowEvent evt )
              System.exit( 0 );
         * @param args the command line arguments
         public static void main( String args[] )
              new Frame().show();
         // Variables declaration - do not modify
         private java.awt.Button button1;
         private java.awt.Checkbox checkbox1;
         private java.awt.Checkbox checkbox2;
         private java.awt.Checkbox checkbox3;
         private java.awt.TextField textField1;
         // End of variables declaration
    I can see from the code that the GUI was generated by a tool. Since you're new to Java programming, I'd recommend ditching the tool and writing everything by hand, otherwise you're not learning much. It's just like when you're learning proofs in Maths, where you start with first principles before making use of the proofs on their own.
    Also, it'll help tremendously if you could spend some time going through the Java Tutorial (http://java.sun.com/docs/books/tutorial/). It's free, and I find it very useful.
    Hth.

  • Help Needed To re-install my PSE 10. new OS (Win 8.1).

    I am trying to re-install my PSE 10. I am having difficulty in doing this. There are two separate files. I have a new OS (Win 8.1). The live chat person had me download both files. Now what do I do? Can someone walk me through this process? Thank you for your time and help. Much appreciated!

    hey kglad, thank you for that info. I am still having a problem. I did as the agent told me and copied both files to a folder I created on my desktop. I then selected both files and extracted the files. But nothing. Can you please tell me how to do this with a bit more detail, as I am not pc literate very much. Thank you for your time and help. Sincerely appreciate both! p.s.. when I click "open" it asks me what program do I want to open the file(s) with.

  • Some help needed for shopping calculator program

    Hi. I would like to thank you in advance for helping me. At the moment I am pretty much stuck. I don't know how to add the input using 'while loop'. This is what I'm suppose to do:
    Write a program called ShoppingCalculator.java that allows the user to enter the prices of several items they have bought and then tells them the total amount. The user can enter the prices for as many items as they want, until they click Cancel. The program should then output the total amount they spent, in a message dialog box. Use pounds for all the amounts.
    So far I have written:
    import javax.swing.JOptionPane;
    public class ShoppingCalculator
        public static void main(String[] args)
                boolean done = false;
                double amount;
                String input;
                while (!done)
                        input = JOptionPane.showInputDialog("Enter the amount you spent on the next item:");
                        amount = Double.parseDouble (input);
                if (done = true)
                        JOptionPane.showMessageDialog (null, "You spent a total amound of £" + amount  );
    }Sorry if the code doesn't make much sense cause I've been changing the code around so many times that.
    At one point when I was playing around with the code, I manage to make the input dialog loop nicely but when I pressed cancel, the message dialog only output the last input I put in. What I'm really stuck here is I need to know how to add the input when using 'while loop' and is it correct to use the IF Statement on this program. Please give me some advice on how to and I will try to work on it again.

    Ok. I have edit the code and this is what it looks like:
    import javax.swing.JOptionPane;
    public class ShoppingCalculator
        public static void main(String[] args)
                boolean done = false;
                double amount;
                String input;
                double total = 0;
                while (!done)
                        input = JOptionPane.showInputDialog("Enter the amount you spent on the next item:");
                        amount = Double.parseDouble (input);
                            if (input == null)
                                        total = total + amount;
                                        JOptionPane.showMessageDialog (null, "You spent a total amound of " + total  );
    }I created another variable (total) and it even compiled. The only problem I have now is the message dialog wouldn't show at the end. When I press cancel and nothing happen. This is what I get on my output command window:
    Exception in thread "main" java.lang.NullPointerException
    at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:991)
    at java.lang.Double.parseDouble(Double.java:510)
    at ShoppingCalculator.main(ShoppingCalculator.java:23)
    Java Result: 1
    Anything that isn't right here?

  • Non-techy language help needed for windows install please

    Hi everyone
    I am new to mac and am felling more than a little confused about how to get the best out of the software i need to use.
    I need office 2007 to run on windows, but i as windows is not already installed, I am not sure which version to buy. I know I don't need parallel software, I just need to do the boot camp thing.
    I've tried going through the tutorials but they are really resonating with me as I have minimal knowledge about these things.
    Could someone help please?

    rlbeau1964 wrote:
    I suspect it will be a Windows 7 disk, which includes both 32 and 64 bit versions, unless Lenovo changes something on the install disk
    You suspect wrongly.  The Lenovo upgrade disk is one version only, either x86 or x64 but not both.
    The Microsoft operating systems licences that come bundled with Lenovo systems (and it's pretty much the same for all vendors)  are all for either x86 or x64 only.  So Microsoft requires the upgrades to similarly licenced.
    Cheers,
    Bill
    Cheers,
    Bill 
    I don't work for Lenovo

  • Help needed for where used list

    Hi All,
    I want to use where-used list for the logical database BRF(Selection screen 950).When i hit where-used list in SE36
    it gives all the programs which use LDB 'BRF' but i want only the programs that use LDB 'BRF' and selection screen 950.
    Regards
    Divakar

    hi
    good
    go through these links
    http://help.sap.com/saphelp_nw04/helpdata/en/03/07b4e75eee423aafab88354306eafc/content.htm
    THANKS
    MRUTYUN

  • Help Needed on a java program

    I am very new to java and our teacher has given us a program
    that i am having quite a bit of trouble with. I was wondering if anyone could help me out.
    This is the program which i have bolded.
    {You will write a Java class to play the TicTacToe game. This program will have at least two data members, one for the status of the board and one to keep track of whose turn it is. All data members must be private. You will create a user interface that allows client code to play the game.
    The user interface must include:
    � Boolean xPlay(int num) which allows x to play in the square labeled by num. This function will return true if that play caused the game to end and false otherwise.
    � Boolean oPlay(int num) which allows o to play in the square labeled by num. This function will return true if that play caused the game to end and false otherwise.
    � Boolean isEmpty(int num) will check to see if the square labeled by num is empty.
    � Void display() which displays the current game status to the screen.
    � Char whoWon() which will return X, O, or C depending on the outcome of the game.
    � You must not allow the same player to play twice in a row. Should the client code attempt to, xPlay or oPlay should print an error and do nothing else.
    � Also calling whoWon when the game is not over should produce an error message and return a character other than X, O, or C.
    � Client code for the moment is up to you. Assume you have two human players that can enter the number of the square in which they want to play.
    Verifying user input WILL be done by the client code.}

    This is the program which i have bolded.Hmmm, that doesn't look like any programming language I've ever seen. I guess you have the wrong forum here, because it isn't Java.
    That looks like a natural-language programming language that directly understands a homework assignment. Either that, or you really did just post the assignment. You wouldn't have done that though, right?

  • Help needed with the installing from a USB drive

    Hi, My HD failed and will not boot on my A665-3DV. I was able to retrieve all the data from both the partitions to another computer. I copied the data from the HDDRecovery partition to the USB flash drive. How do I use that data to install to a new HD?
    Please help. Thanks!

    It's not really hidden. You can connect the hard drive to an external device like coolmax (Coolmax CD-350-COMBO USB to IDE/SATA Device Adapter) which plugs in to a USB port on any PC. You can view the contents in explorer just as any other external HD.
    Of course it took me a while to make the HD work (I beat the S**T out of it on the sides every time it didn't work). It took me a few days to get all the content out of it. It still would not work if I plugged it back into the laptop. 
    I made my flash drive bootable (http://www.ehow.com/how_5215265_make-bootable-flash-drive.html) 
    Copied the contents of the HDDRecovery partition to the flash drive and I was good to go.
    Hope that helps!!

Maybe you are looking for