Help Needed---Opening Attachments/Templates of a BP in non-editable mode

Hi...
I am new to CRM...
How do we open a document/Template attached to a BP in non-editable mode in web UI?
Helpful Answers would be rewarded.
Thanks
Swapna

Similar Messages

Appraisal Document opens in non-editable mode

The Appraisal cycle is as follows: Appraisee-> Appraiser-> Reviewer
The appraisal document is flowing correctly as per the status flow and the corresponding participants are able to act on it. But when the Appraisal document reaches the Reviewer, i.e. the last stage, it opens in a non-editable mode. Hence the Reviewer is not able to make any changes in the document. The buttons are also in disabled mode.
Request you to help me with the same.

Hi,
Thanks for your response. Problem solved. The Roles and Element access was fine.
Needed to set the BSP iView parameter MODE = X
Now its working fine.
Sheetal

I need to upate with no display for Infotype in edit mode.

hi all,
I need to update my custom infotype.
I use the following Function
CALL FUNCTION HR_INFOTYPE_OPERATION.
i need to upate with no display for Infotype in edit mode.
Update required to be done dynamically.
BR,
Ali

Hi ,
You can enter the data at databse level with the help of abap code...
Normally the database table for infotype start with PA0000 for infotype 0 & PA0001 fornfotype 1.
Check your database table name for custom infotype & edit the infotype at table level...
Regards,
Mahesh

Need help fixing video shut off after 2 minutes in non-windows mode

Good morning experts in this forum, I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it. I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode. This includes BIOs mode and recovery mode. There is no problem if the computer logs on Windows within 2 minutes. But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it. It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs. But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer). Now the computer is out of warrenty and I could not find any similar case using Google search. I really appreaciate your help. Thanks

I had the same problem when I upgraded. In my case it definitely was the power supply. In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived. Swapped in a 430W to test and everything was perfect. At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

How to design ALV GRID with a column in NON-editable Mode and has F4 Help?

Hello Friends,
How to code for ALV GRID, which has a column that takes value only from F4 Help and does not accept any other user input?
Can I have that column non-editable and yet has F4 Help?
Please help ASAP.

Hi,
The examples in the mentioned programs do not suffice my problem.In these programs. They have made the cell non-editable but you cant even input value through F4 Help.
I want to make a cell non-editable (which can be changed only through F4 Help), which do not accept user input.

solved pls help needed in creating template

hi frs
i have created a template need some modification to be done my xml output looks like below
off            hours              q1           q2          q3         avg
aaa          10                    1            2            3            2
bbb          20                    2            4             0           3i have done everything but my doubt is while creating avg
to get average i used the following code
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 3?> i have used div 3 but my requirement is like if any thing is 0 for ex if q1= 2 and q2=4 and q3=0 then my formula for avg is like below
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 2?> like wise if we have values like q1=1 ,q2=0 ,q3=0
then
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 1?>how to get it.
pls help.
thanks
basa
Message was edited by:
Badsha
Message was edited by:
Badsha
Message was edited by:
Badsha

Hi,
I dont know the solution for this, but heres a work arround
//create new label some where else in the excel sheet as shown below
Label lblcmbdata;
for(int i=0; i<1000; i++)
             lblcmbdata = new Label(75, i, (i+1)+" satish", format);
             sheet1.addCell(lblcmbdata);
}//set the validation range as shown below
writableCellFeature.setDataValidationRange(75,0,75,1000);
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);this will create a combo list with 1000 values
also you can keep the data to be populated in the different sheet in same workbook by creating a named range as below
workbook.addNameArea("cmbdata", sheet1, 0, 0, 0, 1000);
// then fill the data in sheet1
Label lblcmbdata;
for(int i=0; i<1000; i++)
                lblcmbdata = new Label(0, i, (i+1)+" satish", format);
                sheet1.addCell(lblcmbdata);
//set the validation named range as below
writableCellFeature.setDataValidationRange("cmbdata");
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);Thanks and Regards
Satish

Help needed to setup template item list to send attachement within email te

Hi! I read everything there was in the bookshelf on the setting of template on Outbound communication, advanced template and my main concern, template items list and I still can not send a template email with an attachment inside. I managed to send the email with the attachment in the message body but not send mail with an attachment separately.
Is there a special feature or setting to the template items list or in the Siebel file system that needs to be done ? I've try to put a tag pointing to the template item in the advanced template but got no result. I've tried everything but got no result.
My main goal is to send a template email containing the attachement of an official letter inside. Ideally, I would like the letter as an attachment to be populated by the data of the BC associated (values substitution). This is already working in the advance template. But that's another story. I would be happy if only I can send the email template to include the letter as attachement.
Thanks in advance for helping me!

Yes we do. Even if we go with F9 or by the send email from the file menu, the sending of emails is ok. It's just that it wont send attchment as define in the template item list. All settings are ok and are as specified in related bookshelf. By now, i'm looking if there is any activex control missing for outbond email OR if there is any html tags to put inside the advanced template so that the application could properly attach the file to the email. If you have aswer on you side, it would be appreciated.
Jean.

Help needed with a template...

This is a bit of a strange one to explain!
I loaded the template and I'm looking to make my own category list, however in the table below it shows a drop down menu in the category with a list of items to select from the category table above.
As you can see from the screenshot I'm looking to get the the new item which is named NEW CATEGORY to appear in the drop down menu in the table below.
http://farm6.static.flickr.com/5292/5540868042ef965d428db.jpg
Its driving me mad how to do it!
Thanks

Taking time to look at *_Numbers User Guide_* would help you to stop becoming mad !
Editing the popup in the dedicated inspector may be what you need.
Yvan KOENIG (VALLAURIS, France) samedi 19 mars 2011 21:34:03

Help needed: Opening a Word Document In Browser

Hi All,
I have to give a hyperlink such that when we click on the link, a new window opens up with a word document opened inside it. Can anyone suggest the approach I need to use for this please?
E.g. When I click on "HELP GUIDE" I need a new window opened up. This new window should have contents of the help guide that is actually a word document.
Any suggestions welcome.
Thanks & Regards,
Sumana

The fact is, you need to store the files somwhere from where you can access it:
1. database server file system
2. database table (like in my example)
a) creating your own file table
b) using wwv_flow_files (the table where #WORKSPACE_IMAGES# is stored) - this table is also present in my example since the files uploaded in my custom table are first stored in wwv_flow_files and then transfered to the custom table)
3. any other server which can be accessed by the database server.
These are the options known to me. As soon as you have files stored somwhere, you can also make them available for download.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Urgent Help Needed! .....key locked in repeating mode?

Help please -I've done something stupid but I don't know what. Somehow the 'period' key on my keyboard is locked in a repeating mode and all sorts of complications have resulted...
Briefly here's what happened:
I was writing in InDesign CS when apparently I hit some combination of keys because all of a sudden the 'period' key went nuts typing periods.............. row after row after row. I tried to stop it but could not. I closed out of the document and by not saving changes was able to return to my original text. But whenever i tried from then on to type anything, the period key just takes off, regardless of applications running or not.
I've found I can control the speed of the repeating by using my mouse system controls. I've slowed it down enough to where I can navigate some but I can't type anything, even a password because faster than I can type the machine inputs one or more periods and the password is rejected.
I've restarted multiple times to no result. I've tried resetting the PRAM but the machine will not.
With no applications running, when I can get the desktop open, a file is selected. If I try to select another file the highlighting moves to the selected file for a moment then jumps right back to the previous one. If I trash that file, the selection just moves to another?
The problem is cross user too - I have two user files on the machine and the same thing happens regardless of which user file I'm working in.
I've searched Mac help and can't find anything about repeating keys but that seems to be what's happening - the period key is stuck on if that makes sense.
I've a major project to complete this weekend... PLEASE HELP!
The problem is on my MacBook Pro Intel Core 2 Duo. Obviously I'm writing this on my desktop backup machine.

The problem is cross user too - I have two user files on the machine and the same thing happens regardless of which user file I'm working in.
That points to s 'system-wide' issue.
Try resetting your SMC.
Resetting the System Management Controller >>
Also, you could try booting from your install DVD and see if it does it there. If it does not, it's more than likely a software issue and an Archive and Install should fix it.
Mac OS X: About the Archive and Install feature >>
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
  Mac611 Mobile Mac Support - about.Mac611.com
   iTunes:MacOSG Podcast | YouTube.MacOSG.com
                   An Apple User Group 
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

16:9 Help needed. Workflow: extracted video from DVD, FCE HD edit & DVDSP.

Hi,
I have a project where according to the camera person it was shot in 16:9 with the camera (assuming a DV camcorder of some sort). It was captured from the camera and converted to a DVD (VIDEO_TS folder and everything) and sent to me for editing.
What I need help with is a workflow (and settings) to edit and output this properly.
1) My first hiccup comes in the extract. When I view the DVD that was sent to me, the video looks squished as it squeezes the video into the 4:3 aspect ratio. I was using MPEG Streamclip to extract it. I've extracted it in a 16:9 QT format and it looks fine in FCE HD. However, once I started reading more about editing 16:9 video in the FCE PDF manual, I'm wondering if I should have kept it as 4:3 and then toggled the Anamorphic setting for the sequence.
2) Once I have the correct source to edit - are there any considerations on export for compression? I read somewhere about a program to set the anamorpgic bit for iDVD, but plan to use DVDSP so I'm assuming I can skip this step. I also read in the forum about a QT Conversion setting to use. Do I need to? I was planning to export a reference movie and use Compressor with that. I was planning to use a "Widescreen" compressor option. Is this correct?
3) I know this is beyond this forum, but any advice on what settings should I use in producing the DVD? As noted above I plan to use DVDSP 3 to create the DVD, and I do notice the 16:9 settings in there for each track. I was planning to use the 16:9 Letterbox track setting. Is this correct?
Any other pitfalls I should be aware of as I navigate the 16:9 jungle?
Thanks in advance.
Sean
12 PB Rev C (1.33 GHz G4) & PowerMac G5 Dual 2.0 Mac OS X (10.4.7)

Chandan
First, with regard to your chipset - graphics/video card:
Mobile Intel® GM45 Express Chipset, featuring the Mobile Intel® Graphics Media Accelerator (GMA) 450...
Your graphics card has no video RAM (VRAM) of its own. So, it must use some of your system RAM to be able to function. This is 'dynamically allocated'. That is, your system decides how much system RAM to allocate to the graphics card. I am not aware of anyway to manually control this.
Next, you said you have installed Windows XP. Toshiba India has not posted any XP drivers for your system. Toshiba laptops are very finicky about using Toshiba 'tweaked' hardware drivers to be able to function properly. This computer is a Toshiba European version of your model, and it would appear to have a full set of XP drivers, these will work just fine in your system:
Satellite Pro C650 PSC11E Downloads
The order you load the hardware drivers and Toshiba utilities is critical. The files available for download above are all zip files, so you will have to extract the .exe files to be able to install them. Install the drivers first, then the Toshiba utilities, and given that you already have XP basically working install in this order:
1st Drivers:
1) Chipset
2) Storage Manager
3) Display
4) Sound
5) then all other XP hardware drivers
2nd Utilities:
1) Common modules
2) Hotkey utility
3) all other XP Toshiba utilities.
Good luck.
Mike

Exchange 2013 - Attachments in *.EML files missing in non-cached mode

Hello
Our client recently upgraded from Exchange 2010 to Exchange 2013. Since the migration they have had issues with an archiving system they use. Bascially the archiving system creates .eml files of journaled emails.
The issue our client has is when Outlook is running in non-cached exchange mode any attachments within these .eml files are missing when the eml file is opened. If they change to cached mode the attachments show up fine.
It's almost identical to the following issue I found while browsing the net:
http://social.technet.microsoft.com/Forums/office/en-US/b9a390a9-e014-4098-ad6e-dd377a53422a/office-2010-exchange-2010-attachments-in-emlemails-are-invisible?forum=outlook
Aside from the Exchange version this is exactly what is happening for our client. Is anyone aware of whether the same issue fixed in Rollup update 5 for Exch 2010 SP1 is still present in Exchange 2013?
Our client has already said they don't want everyone using cached exchange so I can't tell them that. Is there a way to manually fix the issue or are we going to have to move back to Exchange 2010 while a patch is sent out? Does anyone know exactly what
the issue is?
Many thanks in advance.

Hi,
I know there was this issue with Exchange 2010, but haven't noticed the same issue in Exchange 2013. The suggestion would be to keep Exchange fully updated - It seems you have done so.
I'm not sure when SP1 will be released, you may post this question to Exchange forum since it may be more related:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How can we change the field confirmed work of SAP PPM from edit to not edit mode ? I need it into non edit mode for time recording with ChaRM

Hello everyone,
Do someone meet this issue ? Do you know if it has a link with customization of ppm or customization of ITSM ?
Many thanks in advance for your replies !

It seems that I've solved this issue. To get it work:
1. Select checkbox Time Recording and Travel Expenses via CATS for project type. Path: SPRO —> SAP Customizing Implementation Guide —> SAP Portfolio and Project Management —> Project Management —> Structure => Define Project Types
2. Run/schedule a synchronization with the report DPR_CATS_CPR_TRANSF (Transfer of CATS Itemizations to Project Management Application).
Time Recording from a Request for Change to a PPM ProjectTask - Working with Projects - SAP Library
Regards,
Alex

Help needed:Templates in WEB UI....

Hi...
I am new to WEB UI...
How can i make the tempalte attached to an opportunity to open up in non editable mode?
For fields, it is rv_disabled = true, but what is it in case of templates which has a number of fields?
I need to make all fields(radio buttons,text fields etc) as well as buttons in the template non editable...when it is chosen for editing if it satisfies a condition.
Thanks...
Edited by: Swapna Viswanathan on Oct 17, 2008 3:15 PM

Hi...
It is not a word template ....but just a questionare template...a survey template...
What i have observed is that when we click on edit option for the survey template,it checks for if teh survey is changable or not.How and where do i set the property of survey as non editable so that it opens up in non editable mode?
IF i make the changable field of the BO as false then it would be displayed in display mode...
But how do i access the attribute that is in protected mode?
i tried using the interface method set property..but some exception is occuring...
The attribute to be updated is
MY_MANAGER_ENTRY->OBJECT_KIND.
Thanks...
Edited by: Swapna Viswanathan on Oct 20, 2008 11:14 AM
Edited by: Swapna Viswanathan on Oct 22, 2008 1:39 PM

Vertical scroll in edit mode and Open a complete row in edit mode

Any help would be greatly appreciated , if someone can share their knowledge/experience on the following two items ..
1. Can you please help on how to implement vertical movement in data grid (Using the up and down arrows to move from an editable cell in one row to the same column in the previous/next row) just like using tab to move in the same row, from one editable cell to the next? Please note we are able to implement the user navigation in editable mode in one single row and the user tabs from left to right and the cells render in edit mode without issues.We are trying to implement this in a vertical fashion to have the datagrid cell rendered in edit mode from one column in one row to the same column in the next row ..We are tryinng to simulate the same user feel when a user navigates in Excel sheet.
2. Is there a way to open a cell in Flex datagrid edit mode by default? I understand that the itemrenderer for that column could be a text input but I don’t always want that cell to be in an edit mode. When the user comes to the screen, it needs to be in an edit mode just as a visual indicator that it can be edited. Once the user finishes editing, the cell can use the default itemrenderer. In other words, how do we fire an edit event on a cell when it is rendered for the first time by default? In nut shell how do you open all fields in the entire row in edit mode (rather opening one cell at a time it in edit mode as the user tabs from left to right )

Can anyone help answering the question we have ? Any pointers would be greatly appreciated

Help Needed---Opening Attachments/Templates of a BP in non-editable mode

Similar Messages

Maybe you are looking for