Help on Date and Time
How come everytime I plug in my iPod onto the computer, my Date and Time Settings on my iPod always reset to a random date and time?
Having same problem on two different iPods with two different computers here since last update. Am having to manually change date and time after each sync (very annoying) am hoping it will be fixed soon.Both computers are set with correct date and time and iPods are both reverting back to a date in October (I think)
Similar Messages
-
To implement search help for date and time fields details
how can i implement search help for date and time fields in screen painter
Hi
Declare the variables as sy-datum and sy-uzeit or any other pre-defined data typ of date and ime types. Serach help will automatically comes.
Aditya -
Need help with date and time calculations please
Hello there.. Im stuck, and im hoping someone can help..
Working on a list to manage and track PTO. User completes PTO request form,
Fields
Name
Start Date (with time)
End Date (with time)
Total Number of Days/hours requested: (calculation)
Full Day: (Yes/No)
ok business need
user has the ability to request a certain number of hours as opposed to a full day.
After searching around on google. I found this calculation to help me figure out how many BUSINESS days being requested.
=IF(ISERROR(DATEDIF([Start Date],[End Date],"d")),"",(DATEDIF([Start Date],[End Date],"d"))+1-INT(DATEDIF([Start Date],[End Date],"d")/7)*2-IF((WEEKDAY([End Date])-WEEKDAY([Start Date]))<0,2,0)-IF(OR(AND(WEEKDAY([End
Date])=7,WEEKDAY([Start Date])=7),AND(WEEKDAY([End Date])=1,WEEKDAY([Start Date])=1)),1,0)-IF(AND(WEEKDAY([Start Date])=1,(WEEKDAY([End Date])-WEEKDAY([Start Date]))>0),1,0)-IF(AND(NOT(WEEKDAY([Start Date])=7),WEEKDAY([End Date])=7),1,0))
This works great as long as its a [Full Day]="YES", displays results in column labeled Number of days
now if [Full Day]="No", displays results in column labeled Number of Hours
BUT this is my issue (well part of it) it calcuate the correct number of hours.. but puts a "1" in "Number of Days" why.. dates have not changed.. I think Its something with the above calculation but I could be way off.
the end result is I need number of days to concat with number of hours
i.e 1 full day 4 hours 1.4
0 full day 5 hours 0.5
1 full day 0 hours 1.0
so that the total can be deducted via workflow.. from the remaining balance in a tracker. (seperate list)
Any angels out there??Posnera-
Try changing time zones and see if the travel itinerary times change.
Fred -
Help about Date and Time by CMP entity bean
I should have two fields in my cmp .one stores current date ,another one stores current time while ejbcreate();
I should be able to get findmethod findobjectBetween ?! and ?2
or that sorts of find method.what type of the method should I use.
java.util.Date or Simply String?
if I use java.tuil.Date as the type.
How shoud my ejbcreate method look like?
public abstract void setDate(Date mydate);
public abstract Date getDate();
ejbCreate(String name,String password,Date mydate,Date mytime)
setDate()
I suppose I use write a business method getCurrentDate() which uses
java.util.Date().toLocale,But I think it just returns String
help pls.I am using oc4j(Oracle9iAS (9.0.3.0.0))
I am getting the following error using Timestamp while deploying cmp entity bean ejb1.1. Thanks...
Auto-deploying TimestampTestEntity.jar (No previous deployment found)... TimestampTest_EntityBeanWrapper0.java:1558: Missing term.
if (if(thread.contextContainer != null)
^
TimestampTest_EntityBeanWrapper0.java:1558: ')' expected.
if (if(thread.contextContainer != null)
^
TimestampTest_EntityBeanWrapper0.java:1559: Invalid expression statement.
response != null) {if(thread.contextContainer != null)
^
TimestampTest_EntityBeanWrapper0.java:1559: ';' expected.
response != null) {if(thread.contextContainer != null)
^
TimestampTest_EntityBeanWrapper0.java:1560: Missing term.
response.setNanos(if(thread.contextContainer != null)
^
TimestampTest_EntityBeanWrapper0.java:1560: ')' expected.
response.setNanos(if(thread.contextContainer != null)
^
TimestampTest_EntityBeanWrapper0.java:1561: ';' expected.
response.getNanos());} // generated from BeanMethodCompilation
^
7 errors
Error compiling F:\oc4j\j2ee\home\applications\TimestampAppl/TimestampTestEntity.jar: Syntax error in source
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized -
I'm a relative newbie still having issues with getting date and time stamps on my printed documents. I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp and despite thinking that I understood that this would update itself when I re-open the document it does not seem to be doing this.
Can anyone help me figure out what I am doing wrong and/or what my options in Mac for putting the following on a document:
A. DATE and TIME /printed/
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any (further) help with this.
- Jonmenu Insert > Date_time
then apply what was described by Jerrold in his message above
Helpful AnswerRe: DATE and TIME and PATH stamps
22 nov. 2011 18:05 (in response to hotwheels 22)
Or simply double-click the inserted date-time (CAUTION : I don't know if the double click apply with every system or if it's dedicated to Lion).
As far as I know, the inserted date behaves the same in header, footer, text box or main text layer.
Yvan KOENIG (VALLAURIS, France) mardi 22 janvier 2011 20:25:12
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
Need help in using SQL in a jsp file to compare date and time
hi every one,
Actually I am doing a project using JSP. I need to compare a date field in the database (MS Acess) to the current system date and time. I have to do this in a select statement.
I have alredy defined a variable of type Date in the JSP file and I am comparing this variable to the date in the database through a select statemant.
Here is what I am doing
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-mm-dd hh:mm:ss");
java.util.Date today = new java.util.Date();
String myDate=sdf.format(today);
query = "SELECT Car_ID, Model_ID, Year, Ext_Color, Price from Cars where EDate <= "+myDate+" ;";
EDate is the feild in the database and it's format is (5/12/2008 5:29:47 PM) it is of type Date/Time in MS Acess.
when I execute the query it gives the following error
SQL error:java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'EDate <= 2008-10-16 08:10:07'.
I hope any one can help me with that error and answer my question, I've tried too many things but nothing helps
Thanks in advance :-)Hi,
When the comparision is needed to be done with the current date , we don't need to send in Java
Date then format it and compare with MS Acess Date.
In MS Access we have Date() function which will give you the current date.
So you can try rewriting your query as following :
query = "SELECT Car_ID, Model_ID, Year, Ext_Color, Price from Cars where EDate <= Date() ;"; ---------------------
Hope this helps.
Thanks -
Today I updated to the latest iphoto version. The update itself went smooth and nice as one is used to from Apple. But when I wanted to finish my already started calendar, I have encountered two problems. The first is that I can't view the aperture library anymore directly from iphoto. Instead I have to open the iphtoto library in aperture but then my calendar isn't there. So now I have to copy images back and forth. No problem.
However, the old iphoto had a small information area in the lower left corner which was very nice to place images on an exact date. This seems to be gone...?? Really? How am I supposed to sort images according to date and time when I have to back to the library view every time? That's not very convenient..Or am I missing something?
Thanks for ANY help!
PatrickThe first is that I can't view the aperture library anymore directly from iphoto.
THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
LN -
Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz helpSettings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist. -
How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!
See this -> http://support.apple.com/kb/HT2727
-
Help adding current Date and Time stamp to file name
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile.htm 8/29/2007 11:41 AM
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>
Thank youI agree, I guess I overlooked that!
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form> -
Microsoft Date and Time Picker Control 6.0 - Need help!
I am working on a form in Office 365 Excel 2013 that uses the Microsoft Date and Time Picker Control 6.0. When I set the form up last week, this Active X control was working perfectly. The weekend goes by...and now it's not working at all?
My PC is 64 bit. I believe my version of Office is also 64 bit. When I researched this issue online, I found lots of people who indicated that this control was missing in their development kit. It was and has always been available in mine
(i.e. I didn't have to load an MSCOMCT2 file). Further, this control WAS WORKING when I created it last week. Now it is not, even though no changes have been made to it. I can place the control on the sheet and even set properties for it.
But once I click out of Design Mode, it is not functioning. It doesn't open or respond to any clicks on it.
Can anyone help me identify a reason why it may have suddenly stopped working? I don't think it is macro-related because I have a 'Clear Form' button on the same page and it works just fine.
UPDATE: I've noticed something else peculiar but relevant. My office 365 just did some updates. When updates were completed, it auto-reopened my file. I noticed that the Date/Time Picker button looked funny (really pixelated).
So I hit 'Design Mode' and resized it. After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it.
Enabled Macros. When I tried to use it after reopen, it doesn't work again. Won't respond to ANY attempts to click on it. I can click on 'Design Mode' and it sees the control, edits properties, etc. But when you click out of 'Design Mode,'
it's a dead button again. I also went to someone else's desk to test this form. Same problem. Date/Time picker button doesn't work, even after enabling macros. The Clear Form Button has no problems though.
Thanks!Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Readind Date and Time from a folder.Urgent help please
Folks,
I need some help regd reading of date and time from a folder.
I have a folder which has 5 files.
I need to read these files along with the date and time
The date and time has to be in the format:
mm/dd/yy and the time in 11:55
I am attaching my code below,
The f.lastModified() doesnt display the data in the current format
Can some one please please help me to get the data in the format defined above
private void readFoldert(){
String folder = "/images/";
File f1 = new File(folder);
ArrayList al = new ArrayList();
if(f1.isDirectory()){
String s[] = f1.list();
for(int i=0; i<s.length;i++){
al.add(s[i] + f1.lastModified);
} // End of if.
Here's how to format a time. I hope you can figure out how to format a date:import java.text.*;
import java.util.*;
public class Test {
public static void main (String[] parameters) {
Calendar calendar = new GregorianCalendar ();
calendar.setTimeInMillis (new java.io.File ("c:\\windows").lastModified ());
System.out.println (DateFormat.getTimeInstance (DateFormat.MEDIUM).format (calendar.getTime ()));
}Kind regards,
Levi -
Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.
Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time. -
HT3180 The date and time on my Apple TV is not setting, anyone that can help me? Please!
I can't get the date and time to set up on the Apple TV, how can I fix this problem? I tried restarting and that's not helping.
Hi Jhoana82,
Welcome to the Support Communities!
I would suggest you unplug the Apple TV for thirty seconds to restart it, then restore it to the factory settings.
Click on the links below for more details and screenshots ...
Apple TV (2nd and 3rd generation): How to restart your Apple TV
You can also reset your Apple TV by unplugging it from the power source for thirty seconds.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
On Apple TV, choose Settings > General > Reset, and then click Restore.
Your Apple TV will restore to its factory settings, and will also download and install the latest Apple TV software update. This process may take some time. Do not disconnect your Apple TV's power cable during the restore process.
I hope you are back up and running with your Apple TV soon!
- Judy -
Help with setting up date and timer on flash
anyone please help me out how to setup the date and
timer on a flash. i tould be appreciate with this.kicon wrote:
>
anyone please help me out how to setup the date and
timer on a flash. i tould be appreciate with this.
a bit too general, what kind of timer ?
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>
Maybe you are looking for
-
How to prevent duplicate of orginal mail (with original sender's name, address) being "attached" when forwarded?
-
Since upgrade FireFox no longer opens with last session, how do you this version 4?
Previously when using Firefox 3.6 I could have multiple tabs open and when I closed the browser, the next time I opened Firefox it would reopen the same tabs.
-
Finder can't access a mounted windows share - but the Terminal can...
When I mount a drive using the finder's "Go / Connect to Server..." command I can choose the share to connect to and Finder mounts the share, puts it on the desktop etc... but then it tells me that: "The folder "Sharename" can't be opened because you
-
While writing float values to file, it is written as junk characters. Can someone tell me how to write float values into a textfile. If possible give the example code.Please help me out of it.
-
IPoE BNG and DHCP on the ASR9K
Hi, can some one tell me if this is possible. I have a bundle Interface -using ambiguous VLANS: interface Bundle-Ether100.1 vrf customers_1 ipv4 unnumbered lo2 ipv4 point-to-point arp learning disable service-policy type control subscriber UFB_DHCP i