Help on inserting/updating an IMAGE into the table

I am using a oracle 8i RDBMS and VB as the development kit. In one of the tables I need to store the picture ( scanned image). How I can store it in the table.

"In Flash, you can select an image in the library and update it's path to a different picture, in turn affecting anything on the stage that uses that image. Can this be done with ActionScript?"
no, you cannot edit a library item using actionscript.
you could create a class that loads an image thereby allowing you to change the appearance of all class instances simply by changing the image loaded. that would allow you to change images dynamically. but all class instances created before changing the image would remain unchanged after the image change.
even that issue could be resolved by storing all your class instances in an array, for example, and iterating through the array whenever previously created instances needed an image change.

Similar Messages

Best way to insert millions of records into the table

Hi,
Performance point of view, I am looking for the suggestion to choose best way to insert millions of records into the table.
Also guide me How to implement in easier way to make better performance.
Thanks,
Orahar.

Orahar wrote:
Its Distributed data. No. of clients and N no. of Transaction data fetching from the database based on the different conditions and insert into another transaction table which is like batch process.Sounds contradictory.
If the source data is already in the database, it is centralised.
In that case you ideally do not want the overhead of shipping that data to a client, the client processing it, and the client shipping the results back to the database to be stored (inserted).
It is must faster and more scalable for the client to instruct the database (via a stored proc or package) what to do, and that code (running on the database) to process the data.
For a stored proc, the same principle applies. It is faster for it to instruct the SQL engine what to do (via an INSERT..SELECT statement), then pulling the data from the SQL engine using a cursor fetch loop, and then pushing that data again to the SQL engine using an insert statement.
An INSERT..SELECT can also be done as a direct path insert. This introduces some limitations, but is faster than a normal insert.
If the data processing is too complex for an INSERT..SELECT, then pulling the data into PL/SQL, processing it there, and pushing it back into the database is the next best option. This should be done using bulk processing though in order to optimise the data transfer process between the PL/SQL and SQL engines.
Other performance considerations are the constraints on the insert table, the triggers, the indexes and so on. Make sure that data integrity is guaranteed (e.g. via PKs and FKs), and optimal (e.g. FKs should be indexes on the referenced table). Using triggers - well, that may not be the best approach (like for exampling using a trigger to assign a sequence value when it can be faster done in the insert SQL itself). Personally, I avoid using triggers - I rather have that code residing in a PL/SQL API for manipulating data in that table.
The type of table also plays a role. Make sure that the decision about the table structure, hashed, indexed, partitioned, etc, is the optimal one for the data structure that is to reside in that table.

INSERTION OF XML DATA INTO THE TABLE USING XMLDOM

hello,
i am using XMLDOM to insert the data into the table
i am using different function of it.
but i am facing the problem to retrive the the multiple entry.
like in my example i have two entry of the ' po number '
& i am using the function
dbms_xmldom.item(l_nodelist, 0)
i which i have to pass index no.
& through this i am getting only single entry according to the index no.
Example on which i am working is
declare
l_xml_data CLOB;
l_xml_doc dbms_xmldom.domdocument;
l_nodelist dbms_xmldom.DOMNodeList;
l_node dbms_xmldom.domnode;
l_xmltype XMLTYPE;
l_po_num VARCHAR2(30);
l_cust_ord VARCHAR2(30);
l_item_code VARCHAR2(30);
begin
l_xml_data := '<?xml version="1.0" encoding="UTF-8"?>

<MobileInventoryResponse>
     <message>
          <message-header>
               <message-id>16244182</message-id>
               <transaction-name>ship-advice</transaction-name>
               <partner-name>cbeyond</partner-name>
               <source-url>http://www.brightpoint.com</source-url>
               <create-timestamp>20080826150709</create-timestamp>
               <response-request>1</response-request>
          </message-header>
          <ship-advice>
               <header>
                    <customer-id>297859</customer-id>
                    <shipment-information>
                         <ship-first-name>RA_13Aug_1</ship-first-name>
                         <ship-last-name>MIND</ship-last-name>
                         <ship-address1>test</ship-address1>
                         <ship-city>test</ship-city>
                         <ship-state>VA</ship-state>
                         <ship-post-code>22102-4931</ship-post-code>
                         <ship-country-code>US</ship-country-code>
<ship-phone1>0040726335068</ship-phone1>
<ship-email>[email protected]</ship-email>
<ship-via>FX01</ship-via>
<ship-request-date>20080826</ship-request-date>
<ship-request-warehouse>CBY1</ship-request-warehouse>
</shipment-information>
<purchase-order-information>
<purchase-order-number>380928</purchase-order-number>
<purchase-order-number>380929</purchase-order-number> ----modi by Ananda Dubey
<account-description/>
<purchase-order-amount>0.0</purchase-order-amount>
<currency-code>USD</currency-code>
</purchase-order-information>
<order-header>
<customer-order-number>0002759</customer-order-number>
<customer-order-date>20080826</customer-order-date>
<order-sub-total>19.0</order-sub-total>
<order-discount>0.0</order-discount>
<order-tax1>0.0</order-tax1>
<order-tax2>0.0</order-tax2>
<order-tax3>0.0</order-tax3>
<order-shipment-charge>18.0</order-shipment-charge>
<order-total-net>0.0</order-total-net>
<order-status>Completed</order-status>
<order-type/>
<brightpoint-order-number>35028788</brightpoint-order-number>
<warehouse-id>CBY1</warehouse-id>
<ship-date>20080826</ship-date>
</order-header>
</header>
<detail>
<line-item>
<line-no>1</line-no>
<item-code>SKU1</item-code>
<universal-product-code>0</universal-product-code>
<ship-quantity>1.0</ship-quantity>
<unit-of-measure>EA</unit-of-measure>
<serial-list>
<serial-numbers>
<esn>TIMI000013</esn>
</serial-numbers>
</serial-list>
<line-status/>
<base-price>0.0</base-price>
<line-discount>0.0</line-discount>
<line-tax1>0.0</line-tax1>
<line-tax2>0.0</line-tax2>
<line-tax3>0.0</line-tax3>
<bill-of-lading>929406733828</bill-of-lading>
<scac>FX01</scac>
</line-item>
</detail>
</ship-advice>
<transactionInfo>
               <eventID>16244182</eventID>
          </transactionInfo>
     </message>
</MobileInventoryResponse>';
l_xml_doc := dbms_xmldom.newDomDocument(l_xml_data);
-- Method 1 to get data
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_po_num := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_po_num);
l_nodelist := dbms_xslprocessor.selectnodes(dbms_xmldom.makenode(l_xml_doc),
'/MobileInventoryResponse/message/ship-advice/detail/line-item/item-code');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_item_code := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_item_code);
l_xmltype := XMLTYPE(l_xml_data);
l_cust_ord := l_xmltype.extract('/MobileInventoryResponse/message/ship-advice/header/order-header/customer-order-number/text()').getStringVal();
dbms_output.put_line(l_cust_ord);
dbms_xmldom.freeDocument(l_xml_doc);
end;
/

In the following code
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from listYou need to understand what the second parm on the .item call does. See [dbms_xmldom.item|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_xmldom.htm#i1126138]
The nodelist is a 0 based array of information and you are only requesting to pull the node info in the first array position. So to get the info in the second array position, you need to use ", 1)". You can also use .getLength and a loop to parse through everything in the node list.

Doubt in inserting Date and time into the table

Hi i have created a table with two columns "Order_ID" and "Order_date" as
create table test
order_id integer,
order_date date default sysdate
Now i insert one row as
insert into test(order_id) values(1);
now i get the output as
ORDER_ID ORDER_DAT
1 05-JUN-12
But i need to insert the current system time also into the Order_date column.
How can i achieve this ???

it works OK for me!
bcm@bcm-laptop:~$ sqlplus user2/user2
SQL*Plus: Release 11.2.0.1.0 Production on Mon Jun 4 20:19:57 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
20:19:58 SQL> @test1
20:20:01 SQL> create table test1
20:20:01   2 (
20:20:01   3 order_id integer,
20:20:01   4 order_date date default sysdate
20:20:01   5 );
Table created.
20:20:01 SQL>
20:20:01 SQL> insert into test1(order_id) values(1);
1 row created.
20:20:01 SQL> select * from test1;
ORDER_ID ORDER_DATE
      1 2012-06-04 20:20:01
20:20:01 SQL>

Insert value with quotes into the table

Hi,
How can I insert a value along with quotes into a table column of type varchar.
Meaning..I want to insert the value 'TEST' including the single quotes.
Regards,
Murali Mohan

It only a matter of using the correct number of quotes. to insert 'TEST' you use 3 quotes on each end
example: '''TEST'''
Hi,
How can I insert a value along with quotes into a table column of type varchar.
Meaning..I want to insert the value 'TEST' including the single quotes.
Regards,
Murali Mohan

Inserting new input record into the table through screen

Hi,
Example UserTable and PaymentTable
UserTable - UserID - Primary Key
PaymentTable - containg couple of fields and UserId is foreign Key.
I designed the page for to insert the new input record using the steps given in the doc "http://download-uk.oracle.com/docs/cd/B32110_01/web.1013/b28967/web_adv007.htm".
When i click the persistEntity method its throws TopLink error cannot insert null value into UserId column in PaymentTable.
Currently i am posting this reply from home... that's why i mentioning the scenario rather than posting the error.
Please tell how to populate the values from the screen to PaymentTable.
Thanks & Regards
Vimalan Balan

Hi Vimalan,
Did you find an answer for you question?
Regards,
Phil

Inserting a associative array into a table

Hi,
I am working on a process where I want to store the temporary results in an associative array. At the end of the process I plan to write the contents of the array into a table that has the same structure. (the array is defined as a %rowtype of the table)
Is it possible to execute ONE sql statement that transfers the array into the table? I am on 10g (10.2.0.4.0)
Here's what I have now:
declare
type t_emp is table of emp%rowtype index by pls_integer;
v_emp t_emp;
begin
-- a process that fills v_emp with lots of data
for i in v_emp.first .. v_emp.last
loop
    insert into emp values v_emp(i);
end loop;
end;But it would be better if the loop could be replaced by sql one statement that inserts all of v_emp into emp. Is that possible?
Thanks!
PS: I'm not sure whether it's a good idea to use this approach... building a table in memory and inserting it into the database at the end of the process. Maybe it's better to insert every record directly into the table... but in any case I'm curious to see if it is possible in theory :)
Edited: Added version info

True, SQL cannot access the PL/SQL type.
So you can not do something like this:
insert into emp
select * from table(v_emp)That is not possible.
But FORALL is possible:
FORALL i in v_emp.first .. v_emp.last
    insert into emp values v_emp(i);FORALL makes just one "round trip" to SQL bulk binding the entire contents of the array.
It is much more efficient than the normal FOR loop, though it is mostly a PL/SQL optimization - even the FORALL actually inserts the rows "one at the time", it just hands the entire array to the SQL engine in one go.
If the logic has to be done procedurally, FORALL is efficient.
If the logic can be changed so arrays can be avoided completely and everything done in a single "insert into ... select ..." statement, that is the most efficient.

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

Inserting an image into a table using the iPad?

I am trying to make an evidence table in pages. I need to insert photographs into a table, next to the related statement. Is it possible to insert a photograph into the table on an iPad as I obviously don't have the 'command' button that others are using. If this is possible I want to be able to insert the picture as a predefined size?

Hi,
Yes, you can do this by using the Word Edit Cell VI under Report Generation>>Word Specific>>Word Tables in your block diagram functions pallette. After creating a table, you can edit specific cells and send the file path of the image saved on your computer to that specific cell. I put together an example that I've attached here as well to help you out with this.
Regards,
Austin S.
National Instruments
Academic Field Engineer
Attachments:
RGTWordImageInTable.vi ‏14 KB

Can't insert a CD/DVD into the disc drive. Recently installed a new harddrive, and the CD/DVD drive hardware is no longer recognized. Also, with new harddrive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP.

Can't insert a CD/DVD into the disc drive. Recently installed a new 1 tb hard drive, and the CD/DVD drive hardware is no longer recognized. Also, with new hard drive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP (2.2 GHZ Intel Core 2 Duo. 4 GB 667 MHZ DDR2 SDRAM)

Also, when I check out the hardware list, under Disc Burning - the following is reported: No disc burning device was found. If the device is external, make sure it’s connected and turned on.
The disc drive worked fine prior to the HD upgrade and OS update to Mt. Lion.

Is there a way for the responder to insert a photo or image into the form?

I'm trying to create a form with a field in it that would allow the user to insert a thumbnail photo or image into the response. Is this possible at all?

Yes, you can add an "Attachment" field, here is a video overview: http://acrobatusers.com/tutorials/how-to-add-attachments-to-a-formscentral-form
And here is a tutorial: http://forums.adobe.com/docs/DOC-2656
Thanks,
Josh

How to get the image into the PDF File, Cut the image into the PDF What acrobat product help to do that?

I need to cut some image into the PDF file, what Adobe product can help me with it?

Hi Hugo,
Please elaborate your issue. What exactly do you want to achieve?
Regards,
Rahul

Record not inserting into the table through Forms 10g

Hi all,
I have created a form in 10g(10.1.2.0.2) based on just one table that has 4 columns(col1, col2, col3, col4).
Here col1, col2 and col3 are VARCHAR2 and col4 is date and all the columns are not null columns(There are no primary and foriegn key constrains, which means duplicates are allowed).
My form contains 2 blocks where block 1 has one text item (col1) and 3 buttons (Delete, Save, Exit).
And block2 is a database block and has col2,col3,col4 which are in tabluar layout frame displaying 10 records.
When the form is opened the cursor has to be in block1.col1 for querrying. Here i enter a value in col1, and then when I click on col2 in the block2, then I put execute_query in new_block_instance of block2, which displays the records.
The block2 properties are not updatable, insertable and query is allowed.
Everything is working good until here. But here in the block2 when I want to insert another record into the table, by navigating all the way down to the last empty record and entering the new values for col2, col3 and col4 And then Ctrl+S will display the message "*FRM-40400: Transaction complete: 1 record applied and saved.*" But actually the record is not inserted into the table.
I also disabled the col4 by setting the Enabled property to No, since while inserting new record the date have to be populated into it and it shouldnt be changed by the user. And im populating the sysdate into the new record by setting Intial Value property to *$$DATE$$*.
And another requirement which I could not work arround here is that, the col3 also should be populated with the username of the user while inserting.
please help me...

Hi Sarah,
I do not want to update the existing record. So I kept Udate Allowed to No in property palette for the items in block2.
Do I have to do this property at block level also?
I'm inserting a new record here.
Edited by: Charan on Sep 19, 2011 8:48 AM

How do I get images into the "images" folder with Dreamweaver CS4?

Hi,
I've been following the tutorial by Christopher Heng, on chapter 2, adding images. "Look at the right panel of the web editor. You should see at least two major sections: the top section has a tab entitled "INSERT", and the bottom section has a tab labelled "FILES""...
I don't see the tab "Insert", but do see "Files" and have created a folder in there called "Images", as Mr. Heng explained.
The next step sounds easy enough - copy your image files into the images folder. But for the life of me I can't seem to do this. Can someone PLEASE help me out?
Thank you - Louise

Do you mean you can't get your images into the images folder of your site?
Open the folder with your images in it on the desktop,
not inside dreamweaver,
and open the folder you want to put the images on your desktop too,
so both folders are open,
right click the image, copy and paste it to your website images folder
or double-click the image and drag it across into the website images folder.
You could also open the image in your image editing software and 'save as'
then browse to your website images folder and save there.
Daniel

PSE7 ~ I'm inserting a .jpg image into a project, need to resize smaller and it ends up blurry!

Please help!
I am creating a birthday invitation for my daughter using PSE7. I found a few .jpeg images on the web that I want to use. The images should be okay size-wise (a 66kb image) when I try to insert this image onto the invitation (size of the invite is 5x7) - image takes up maybe 1/6th of overall invitation. When I insert this image into the project, it is HUGE. I need to resize it to reduce, but when I do for some reason it becomes very blurry. I can't figure this out! At the very least a 66kb image should be able to be inserted onto this 5x7 invitation as a 1" square and be crisp at that size?? Ugghh!
I hope I am being clear in my request...the image in question is pictured below. When this image is inserted into my PSE project, it would be about 2" high on a 5"x7" invitation...
Also, when I save the whole invitation as a jpg for printing, it's only 120kb file size...shouldn't it be much larger? Am I missing a global setting somewhere that's messing everything up?? Many thanks in advance to anybody offering suggestions...

You're thinking in the wrong terms. You need to be focusing more on ppi (pixels per inch) rather than the file size in KB. Start by making sure your main image is at 300 ppi (you may have to start over from scratch). If the graphics are now way too small when you bring them in, remove them and try a lower resolution, but you don't want to go below about 220 usually (it depends on your printer how low you can go and get away with it).
Go to Image>Resize>Image size to check your invite's ppi, but my guess is that you started at something like 72 ppi. If you did, I'd start over, unless you have enough pixels that when you change the ppi to 300 (with Resample Image turned OFF) it's still large enough.

Help on inserting/updating an IMAGE into the table

Similar Messages

Maybe you are looking for