Help on message split ABAP MAPPING

Hi friends
I need to split a message by abap mapping , I am having problem while creating the tag Messages and Message1.
the mapping is going into error Comparison error during the execution of a simple
it is turned up to be the issue of <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1> not being created correct
I am using this code
CALL METHOD l_document->create_simple_element_ns
 EXPORTING
 name = 'Messages'
 parent = l_document
*u2022PREFIX = ''
*u2022URI = ''
*u2022VALUE = ''
 RECEIVING
 rval = Messagesnode.
CALL METHOD l_document->create_simple_element_ns
 EXPORTING
 name = 'Message1'
 parent = MESSAGESNODE
*u2022PREFIX = ''
*u2022URI = ''
*u2022VALUE = ''
 RECEIVING
 rval = Message1node.
any help wil do
Thanks

No answer
Thanks

Similar Messages

Message split ABAP mapping

Hello everybody,
for a special mappging I use ABAP mapping -everything fine.
But I need to split the message with ABAP mapping.
Does anybody know if this is possible ?
In the ABAP-class I use the interface IF_MAPPING. This has as a result parameter the parameter RESULT Type XSTRING (no table).
It only works to add to XMLs in 1 XML string, but my result have to be 2 XML files.
Alternatively would it be an idea to use multi message mapping (graphical first) AND then ABAP-mapping for special mappings?
Thanks a lot,
Florian

Florian,
for multimappings in coded mappings (xslt, java and abap mappings) you'll also create a single stream, but in this case, the stream may have the following format:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <enter your first message here>
</ns0:Message1>
<ns0:Message2>
 <enter your second message here>
</ns0:Message2>
</ns0:Messages>
where <ns0:MessageX> tags refer to each different target message type.
In the case you have a 1:n split, you'll have only 1 message type, but may have several messages within it.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
 <My_message id=1>
 </My_message>
 <My_message id=2>
 </My_message>
</ns0:Message1>
</ns0:Messages>
Also, remember that, when you define an interface mapping as multimapping (meaning, you set either source, target or both interfaces to multiple messages, your input stream will also contain the <ns0:Messages> and <ns0:MessageX> tags, so you need to treat them in your mapping program.
Regards,
Henrique.

Reading attachment in SOAP message with ABAP mapping

I am searching an ABAP code to read attachment in sender SOAP message..
I am using PI 7.3, I can read by java mapping but I get another error after reading the attachment.. So I try to abap mapping..
That's it..
Thanx ..

Hello Mark,
1. My Soap Sender Adapter, I checked the Keep Attachment option
2. I am getting the WSDL file from the SOAP Sender Agreement.. it is like http(s)://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c? as you said.
I used the user-defined function, it works when <inc:Include href="cid:test.jpg" xmlns:inc="http://www.w3.org/2004/08/xop/include" /> is deleted in the message.
If the coming message includes <inc:Include href="cid:test.jpg" xmlns:inc="http://www.w3.org/2004/08/xop/include" />,
the <null> error occurs.
Thanx for your reply..

Mapping - message split

Hi all,
I need a little bit help with message splitting.
I have message structure like below. The Error Node exists in all rows, in first part it is initial (with no value), then come rows with different error messages.
<Message1>
<Row>
 <node1>a</node1>
 <node2>a</node2>
 <Errror/>
</Row>
<Row>
 <node1>a</node1>
 <node2>a</node2>
 <Errror/>
</Row>
<Row>
 <node1>a</node1>
 <node2>a</node2>
 <Errror>text_a</Errror>
</Row>
<Row>
 <node1>a</node1>
 <node2>a</node2>
 <Errror>text_b</Errror>
</Row>
</Message1>
I need to split it into 2 messages so, that in first message will be rows without error, and in the second with.
<Message1>
<Row>
 <node1>a</node1>
 <node2>a</node2>
</Row>
<Row>
 <node1>a</node1>
 <node2>a</node2>
</Row>
</Message1>
<Message2>
<Row>
 <node1>a</node1>
 <node2>a</node2>
 <Errror>text_a</Errror>
</Row>
<Row>
 <node1>a</node1>
 <node2>a</node2>
 <Errror>text_b</Errror>
</Row>
</Message2>
Is this feasible with graphical mapping? How can I can make the assignment of the row once to first and
other time to second message? Or do I have to use XSLT/ABAP? (I am not very familiar with java...) Thanks for any suggestions.

Hello,
Prateek, Jude,
I think you did not get the point.When I map it just in the simple way it will look like this:
Input rows:
1 - no error
2 - no error
3 - error
4 - error
5 - error
Output
Message1 rows:
1,2,3,4,5
Message2 rows:
1,2,3,4,5
I will have 10 rows in output (I want to have just 5 and in this way M1-1,2; M2-3,4,5).
Udo,
I have tried already this approach. However it does not work as desired.
I have mapped:
Error node -> not -> exists -> if
Input_message_Row -> then
output -> Output_message1_Row
Error node -> exists -> if
Input_message_Row -> then
output -> Output_message2_Row
However the decision is made on the first row, and the first row is mapped also to second message, and that is all. The next rows are not considered at all:
Input:
<ns0:Messages xmlns:ns0=...>
 <ns0:Message1>
 <ns1:MT...>
 <Row>
 <test1>11</test1>
 <Errror/>
 </Row>
 <Row>
 <test1>111</test1>
 <Errror/>
 </Row>
 <Row>
 <test1>111bb</test1>
 <Errror/>
 </Row>
 <Row>
 <test1>11a</test1>
 <Errror>a</Errror>
 </Row>
 <Row>
 <test1>11axx</test1>
 <Errror>axx</Errror>
 </Row>
 </ns1:MT...>
 </ns0:Message1>
</ns0:Messages>
Output:
<ns0:Messages xmlns:ns0=...>
 <ns0:Message1>
 <ns1:MT...>
 <Row>
 <test1>11</test1>
 </Row>
 </ns1:MT...>
 </ns0:Message1>
 <ns0:Message2>
 <ns1:MT2...>
 <Row>
 <test1>11</test1>
 <Errror/>
 </Row>
 </ns1:MT2...>
 </ns0:Message2>
</ns0:Messages>

Message split - XML to IDOCs - (1:n) mapping

I have to split an incoming XML(in idoc DEBMDM format) from MDM to 2 Idocs (ADRMAS & DEBMAS).
Target message set to occurences "0:unb".
Have tested my graphical-mapping in IR and its working fine. Tested the configuration and got error in IB.
In SXMB_MONI i find the error message,
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Messages in multi-message format can only be sent to one Adapter Engine</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Read in few threads about creating a "custom adapter module"...is this right? if so.... how to proceed ?
Appreciate any help.

Ram,
Message Split using Graphical Mapping that ur using now supports adapter which are on same J2EE engine .
In ur case Ur trying to post IDOCS ( I suppose ) which is not
supported in using Graphical mapping.
U need to change the design.
-- Kavitha

Abap mapping for content conditions routing in a flat-flat scenario

Dear Experts.
I have a flat-flat file scenario. Based on the content of the input file, I need to route data to the receiver.The source flat file will have several IDOC details.
Assume two fields FIELD1 and FIELD2 in different segments of the IDOC. My requirement is if FIELD1 of an IDOC = "XYZ" and FIELD2 of the same IDOC = "PQR", then this IDOC's details has to be passed to the receiver.
I have tried to implement the above condition at interface determination in graphical mapping.
In the graphical mapping, the problem is:
Assuming there are 3 idocs in the input file.
FIELD1 of IDOC[1] = 'XYZ' and FIELD2 of IDOC[1] = 'PQR'
FIELD1 of IDOC[2] = 'LMN' and FIELD2 of IDOC[2] = 'RST'
FIELD1 of IDOC[3] = 'ABC' and FIELD2 of IDOC[3] = 'DEF' .
Now, if none of the IDOCs in the input file satisfy my requirement,the message mapping should not be called at all. But in my case its failing because FIELD1 of IDOC[1] and FIELD2 of IDOC[3] together are satisfying the condition and hence the message mapping is getting called.
And I need to check this condition IDOC wise. Both the conditions has to be satisfied in the same IDOC.
The question is very similar to the one posted by SHOBHA HB. (Topic:Receiver determination(or Interface determination) and conditional routing )
but, due to complexities in the graphical mapping, we have decided to go for the ABAP mapping instead.
Kindly help, by mentioning the steps I should follow for this interface, the logic basically. I already have paths to some basic ABAP mapping documents from SDN, so, kindly refrain from posting general URLS for definition or history of ABAP mapping.
IF you could guide me on this interface, It would be really helpful.
regards,
giri raj

Hi,
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
This document will help you to create ABAP Mapping .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
How to Use ABAP Mapping in Exchange Infrastructure 3.0 (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
SAP Network Blog: How to call XI ABAP Mapping via RFC
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
SAP Network Blog: Testing ABAP Mapping
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
An ad-on
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
Regards

Sproxy and abap mapping

Hi All,
1.how can i get the data into sproxy(application system) from integration builder(integration server)?.
2.how to do setting in TC SM59 for http destination for this?
3.pls give abap mapping scenario
Thanks & Regards,

Hi Srinivas
for more details check these also
How to use abap mapping in XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Have a look at this document...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Hi Refer this Pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
This Blog also
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
Help link - http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

An excellent How to guide on the same - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15ecdf90-0201-0010-d792-941a3c3c30a4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Start with this...........
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
This document will help you to create ABAP Mapping .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
Thanks!!

Abap mapping code

Hi friends
I am new to Abap mapping PLZ can any one helpme on abap mapping code
with Source structure and target structure
Message was edited by:
Viswanadh Vadde

Hi !!
refer the below links
BAP Mapping is used whenever you explicitly need to build your output XML structure . Its entirely depends on your call which approach you want to adopt i.e. JAVA mapping or ABAP mapping as in both the cases you need to explicitly build the output structure . ABAP Mapping however creates a DOM tree in the memory . Therefore it can be a performance issue whenever your source structure is complex . In case you need an idea of how to go about ABAP mapping here is a link which you can refer
http://help.sap.com/saphelp_nw04/helpdata/en/47/b5413acdb62f70e10000000a114084/frameset.htm
Also ABAP mappings have the handicap that they are separated from usual development in Repository. Additional there is more (ABAP, DOM) experience required as for example for XSLT or graphical mapping (my point of view). So they are used for special reasons like access to ABAP stack (transparent tables!).
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken] [original link is broken] [original link is broken]
Comparing Performance of Mapping Programs
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
ABAP Mapping Blogs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
How to Use ABAP Mapping
https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Some more
ABAP Mapping
I suggest you also go through these links to know more on ABAP Mapping:
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken] [original link is broken] [original link is broken]
This document will help you to create ABAP Mapping.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
why Abap Mapping and how to acheive it
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken] [original link is broken] [original link is broken]
Pls reward if useful

IDOC--XI--IDOC Using ABAP MAPPING

Hi all,
My requirement is to map source IDOC fields to target IDOC fields using ABAP Mapping.
few fields in source idoc structure has to be merged into a single field in target idoc structure.
need help on how to start with as i am not exposed to ABAP Mapping.
regards,
Subba

Hi Subba,
I suggest you also go through these links:
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Re: Performance of mappings (JAVA, XSLT, ABAP)
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken]
This document will help you to create ABAP Mapping.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Regards,
Abhy
Message was edited by: Abhy Thomas

Can somebody post link to How to Use ABAP-Mapping in XI 3.0?

Hello,
can somebody post a real link to the document How to Use ABAP-Mapping in XI 3.0. All the links to this documnet in the existing posts are not valid.
Thanks for your information
Jayson

Hi
Following weblog might help you.
Testing ABAP Mapping - Testing ABAP Mapping
XML DOM Processing in ABAP part I - Convert an ABAP table into XML file using SAP DOM Approach.
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
SDN TV demo to create and test ABAP mapiing - https://media.sdn.sap.com/SDNTV/main.asp?mediaId=128
How to guide for ABAP mapping.
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&
Also check these links,
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
Testing ABAP Mapping
Using ABAP XSLT Extensions for XI Mapping
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 9, 2008 6:27 AM

Abap mapping "How to" not available, can you send me the pdf?

Hello,
I need information about ABAP Mapping and all the posts about that kind of mapping have a link to the sdn guide "How to Use ABAP Mapping in Exchange Infrastructure 3.0" --> https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
But that link is broken , is there any way that you can send me that file if you got it?

Hi Marshal,
Start with this...........
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
This document will help you to create ABAP Mapping .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping

Abap proxy n abap mapping

HI,
When to use abap proxy and when to use abap mapping?
Plz explain with some example.
I think in both the cases we use abap code only. Right?
Regards,
Satish.

Hi satish
Refer to following SDN Demo which explains the need and how to do the ABAP mapping.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#jdi [original link is broken]
This document will help you to create ABAP Mapping.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/47/b5413acdb62f70e10000000a114084/frameset.htm
Activating ABAP proxies:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Proxies in XI (Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Reward point if useful

ABAP mapping split messages and dynamic filename

Hello,
i have set up a IDOC to file scenario where the IDOC is split into several files, which works fine. In addition to this it is required to set a dynamic filename out of the ABAP mapping for each file. If only one file is created this works already as well but how do you set the dynamic configuration when the messages are split?
Regards,
Andreas
Edited by: Andreas on Feb 26, 2009 9:09 AM

you cannot do dynamic configuration for message splits. The below is from SAP help.
Adapter-Specific Attributes and Multi-Mappings
In multi-mappings, there are multiple message headers with adapter-specific attributes. The mapping API can only access one message header. This has the following consequences depending on whether there are multiple source or target messages:
u25CF     1:n Transformation
If there are multiple target messages, the header for the adapter-specific attributes is copied for each message. This means that you can only create one header for all adapter-specific attributes, and not individual headers.
u25CF     n:1 Transformation
This variant is only possible for multi-mappings in integration processes. If there is more than one source message, read-access to the adapter-specific attributes of the various message headers is not possible at runtime.
u25CF     m:n Transformation
All afore-mentioned restrictions apply here. Developers can at most write the same adapter-specific attributes for all target messages to the header, without read-access to the attributes of the source messages. m:n transformations are only supported within integration processes.
What i will suggest is to use BPM to have the message split i.e 1:N mapping and then after that have another mapping 1-1 to have the dynamic configuration

Multi-Message-split with ABAP mapping and adapter specific attributes

Hi all,
With ABAP-Mapping I split 1 message to n messages.
So many files are generated in file-Adapter.
Everything fine.
But now I want the file names different using adapter specific attributes.
It is not possible to use variable substitution and write the file name in payload because of receiver restrictions.
I tried this with following similar coding in ABAP-Mapping:
data: lt_records TYPE MPP_DYNAMIC_TAB.
 Loop.
 l_file_name = "payload-Inbound"-information
 ls_record-namespace = 'http://sap.com/xi/XI/System/File'.
 ls_record-name = 'FileName'.
 ls_record-value = l_file_name. "l_file_name comes from inbound-payload
 append ls_record to lt_records.
 Endloop.
CALL METHOD dynamic_configuration->set_all_records
 EXPORTING
 records = lt_records.
If I start the interface I see in the monitoring the dynamic configuration with many entries for file-name in the the SOAP-Header mapping of the request message (following extract):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPAADDRESS.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPABROKERROLE.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACOMPANYSEGMENT.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACUSTOMERROLE.XML</SAP:Record>
The result is that all files have the same file name (last entry in dynamic configuration).
Is it possible to write the adapter specific configuration in ABAP-mapping for every single result message??
Thank you for your help,
Florian

Hi Florian,
I've a different idea...I dont think its a "right solution" but just another work around..it involves a BPM...
In your ABAP mapping..set the dynamic config with as many variables as number of different messages...i.e. use the variables like 'FileName1', 'FileName2'...'FileName6' instead of 'FileName'. But use the same namespace 'http://sap.com/xi/XI/System/File'
Call the above mapping in a BPM and capture the individual messages and set the attribute 'FileName' from the values of 'FileName1' to 'FileName6' accordingly using Message Mapping and then send the message using the 'Send' step.
before you try this, try using the variable names 'FileName1' ...'FileName6' in the receiver adapters...enable the ASMS. I know we need to select which variables from the dynamic config to be used by the adapter by specifically selecting 'FileName', 'Directory' etc...but just give it a try and see if it works..
Or..instead of using a BPM..you can combine Henrique's idea...use Adapter module to set the value for 'FileName' from variables 'FileName1'...'FileName6' accordingly.
hope I'm clear..lemme know if you have any questions..
cheers
praveen

Message Splitting in ABAP Mapping

Hi Everybody,
I have Implemented ABAP mapping in my Scenario and have used message splitting. That is for each header node of source corresponding number of target nodes should be created.I have a source node under which i have 5 subnodes and when this source node repeats again i need to generate two target nodes with 5 subnodes in each of the target header node.
I have tested the scenario in SXI_MAPPING_TEST by making the following changes in IR and ID.
1. Changed the cardinality to 0 to unbounded in Interface mapping.
2. Have kept the Interface determination type to Enchanced.
I am getting the ERROR" split mapping created no messages" in sxi_mapping_test.
Can anyone help me out on this.Good answers will be rewarded.
Thanks all,
Zabiulla

Prabhu,
what needs to rely on Java stack is the adapter, not the mapping.
Mohammed,
make sure you create Messages/MessageX tags (with proper namespace) in your multimapping. Also, expect these tags in your input mapping.
You can get the exact Messages/Message1 tags (with the namespace) in a message mapping with multiple input or output messages. Create it and go to test tab, just to check the tags you should read/create in your abap mapping.
Regards,
Henrique.

Help on message split ABAP MAPPING

Similar Messages

Maybe you are looking for