Help on setting up my Tascam us-144 to Adobe 3

Ok here's the thing i just purchased a TASCAM US-144 installed everything it brought, connected my mic to it then opened Adobe Audition 3 ..now here's where i break my head on how to set it up i managed to record a vocal but when i go back to play it no sound comes out .Only when i go to edit the vocal by double clicking it then sound comes out! so in the actual window i have no sound! must be some setting anyone please help me by giving me step by step on how to correctly set it up ..

I'm not quite sure of a more technical solution.
But something to try out that is maybe a simple mistake. Check the buttons on the left. The are 3 of them. M, S, and R.
R is obviously, to record. S is solo, meaning you only hear that track. And M is mute. It will completely Mute that track.
Check if the M looks "illuminated". That is the only way I've been able to  reproduce that problem.
Hope it helps.
~Bill

Similar Messages

  • Tascam US 144

    I just purchased my first Mac last week and i love it except for the fact that i cannot get my Audio/MIDI interface to work with it.  It is a Tascam US-144 and it works fine with my PC but doesnt work at all with my Mac.  I installed the drivers for Mac and nothing.  The Tascam utility says that nothing is connected.  Any ideas?  Thanks

    OK.  I will provide you step by step what i did and what Tascam had me do in hopes that it helps you figure your issue out.  If this doesnt help you resolve your issue, i recommend contacting Tascam yourself.
    1. I installed the MAC version of the firmware and drivers from the disc that came with my Tascam US-144 and once completed, plug the US-144 into the Mac.  The app for the US-144 said that nothing was attached or it couldnt be found.  Something like that.
    2. So i downloaded the latest driver from the Tascam website.  This showed up some feautres but not all.  The latest drivers were for the MkII.
    3. I had reached out to Tascam about this especially since it is so confusing to figure out what to download on there website.  There is no consistancy with there naming convention for the drivers and firmware.
    4. While on the phone with Tascam support, we uninstalled all versions of tascam craziness and installed just the file for the MkII.
    So to be clear, i had to install a driver for a device that i didnt purchase for it to work.  I have the US-144 and the driver for the US-144 Mk II is the only one that would make it work.
    5.I restarted my MacBook and once i was logged into the Mac i plugged the US-144 into it and opened Garage band and was able to use it to control Garageband. 
    I did however notice that if i plugged in the US-144 before turning on the Macbook, the US-144 was never seen unless if i unplugged it and plugged it back in.
    I hope that helps.

  • HT201209 Hey guy I need to help please set balance my app id = 0

    I need to change location my id but I can't make because I have  point
    In store please help me set my point app id to null thk
    <Subject Edited by Host>

    You will need to Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I took my iMac to be fixed and when i got it back, mail was not set up. I called Apple Support and they helped me set up mail. Then the emails went to trash on the iMac and on the MacBook Pro (same emails). There are no numbers by the 'inbox' to tell how

    I took my iMac to be fixed and when I got it back, mail was not set, so I called Apple and they helped me set up mail. Now the new mail goes to trash and there is no number by the 'inbox' to tell me how many new messages I have. I cannot save a draft to 'drafts.' There is a large number by 'trash' (I think all mail went to trash - including drafts). When I send myself an emai, it goes to trash also. This is on both my iMac (the one taken in) and my MacBook Pro (same emails) which was not taken in.
    I went to 'rules' but have no idea what to do there. There are no rules in the rule box. When I click 'add rule' it puts 'rule 1' in the rule box, but since that was not there when I took it in, I delete it to have an empty rule box.
    Can someone pleasehelp me. I am completely stupid with all this. Do not under stand what is suppose to be set up in 'rules.'
    Thank you so much,
    Arudi

    Now new mail is coming to both computer's inboxes but there is no number on the stamp icon on dock to show number of emails on the iMac. Nor is there a number by either email address under MAILBOXES/inbox (sidebar) on the iMac. This number is showing on MacBook Pro.
    I also can save drafts now on both computers.
    Seems the Pro is fixed and the iMac is only missing the numbers on dock icon and by addresses in inbox.
    Now that the problem is less, I feel i am wasting your time but will continue so maybe I can get those numbers back.
    Two emails > AT&T email and gmail.
    Apple's Mail program for email - yes, and gmail.
    IMAP for both accounts.
    Did not change mail configuration on MacBook.
    The iMac and MacBook Pro have the same mail configuration except in Accounts/mailbox behaviours/store draft messages on the server was not marked on MacBook > it is now.
    'Store junk messages on the server' was marked on one computer for gmail, but is unmarked on both now.
    On the iMac, Accounts/Accounts info/Outgoing mail for gmail is smtpgmail.
    On the MacBook Pro for gmail it is smpt.gmail.com (plus) my email address.
    Rules/Add rule window, on the MacBook third line is 'Any Recipient', on the iMac third line is 'From."
    The last box on that line has my email address on the MacBook.
    The last box on that line has the last address I sent an emil to (last night), on the iMac.
    On the last line on iMac, no box was selicted for 'to mailbox' > I choose 'inbox' because it is on the MacBook Pro.
    Now I have a Rule #1 and am not sure I should have because there was no rules marked when I took the computer in.
    Thank you. I relized I had done the labeling wrong when so much of my question appeared twice and no one else's did. I know how to do it now.
    Thank you so much,
    Arudi

  • Help needed setting up print server

    i got 2 printer:
    1 usb inkjet epson 1290
    1 hp5100 network
    i have 1 server:
    serving epson for our col proof using powerripx as driver and shared via os x print server
    i have 2 network interface card on the server.
    my problem is: the position of the server in the office has only one network interface port, i want to have my HP connected to the 2nd network interface of the server and the server connected to the only available network point there and thus have the server serving both printer.
    have set up the en1 interface, enable NAT, dhcp, firewall, but the server itself does not recognised the hp which is connected to the 2nd ethernet interface. when i move it on top of the ethernet list in system preferences it does recegnised it but the the whole print server is not accessible on the network.
    can someone with more experience help me set this up.
    thx

    I didn't say it's impossible. I just offered an easy solution to your problem that will save you and you users some hassle in the long run (eg. when you come to troubleshoot you wn;t have to look at 2 networks and a firewall). I guess I just like easy solutions. And ,dude, 20 bucks...
    If you want to go the hard(er) way you need to:
    1. set up a second network address range on the second card
    2. give the printer a fixed IP address within that range
    3. ensure firewall is not blocking packets from/to the printer
    4. config the printer on your print server & clients
    hth,
    b.

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • TS3276 Help in setting Apple Mail to receive and send mail via Yahoo mail service

    I would appreciate help in setting up Apple Mail to receive and send e-mails via Yahoo.   Thank you

    Sorry,
    Have you tried the connection doctor? In Mail menu bar under Window connection doctor, this will usually let you know where the problem might be.
    http://support.apple.com/kb/TS3276  Read thru this as well.

  • Will someone please help me set-up Acrobat to send a PDF via webmail?  Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

    Will someone please help me set-up Acrobat to send a PDF via webmail?  Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

    Are you using a Microsoft or Apache web server? If so, you can submit to a server-side script, which will bypass web mail and client-side email software such as OUTLOOK.
    For examples:
    http://www.nk-inc.com/software/pdfemail.net/examples/

  • Need help w/ setting up ports to run a server for America's Army

    Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
    Q: How do I run my own server?
    A: Quick and dirty server info:
    1. Edit RunServer.bat to change the map.
    2. Run RunServer.bat
    Or:
    server.exe LAN MAPNAME.aao (Host a LAN game)
    server.exe global MAPNAME.aao (Host a Public game)
    Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
    There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
    [Engine.GameEngine]
    ServerActors=Andromeda.AndromedaMBS
    [Andromeda.Andromeda]
    GameServerIp=
    Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
    If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
    [Andromeda.AndromedaMBS]
    QueryPort=20025
    Punkbuster user fix correction.
    If [Engine.GameEngine] block has been changed to read as below:
    [Engine.GameEngine]
    ServerActors=IPDrv.AndromedaMBS
    Please add the following block to your INI file:
    [IpDrv.AndromedaMBS]
    QueryPort=20025
    (Last Updated: 2006-04-20)

    Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
    Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

  • I need help in setting up a wireless connection

    I need help in setting up a wireless connection.
    I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
    Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
    Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
    My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
    I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
    Any suggestions would help me.
    Thanks,
    DaisyMay

    NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
    Model: WNDR3400-100NAS | SKU: 1208844
    This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
     4 Read reviews (21)
    Sale: $79.99

  • Can anyone help with setting up AirPrint on my iPhone 4

    Can anyone help with setting up AirPrint on my iPhone 4.  Printer is ready.

    you have a compatable printer correct? http://support.apple.com/kb/ht4356
    if you do may i introduce you to a hassel free app for your mac called printopia i use it also very easy to set up and use
    http://www.udeo.com/mac/printopia/
    hope thats helped
    Goody

  • Help, cannot set references to Photoshop.Application in VBA

    Hello,
    I have used CS5 in the past and have had a well-functioning VBA program (running within Access 2010) that ran fine, opens 32-bit Photoshop, and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, scripting programs including VBA needed to run the 32 bit version of Photoshop, not the 64 bit version.)
    I installed CS6 about 6 months ago and the VBA program continued to work just fine, provided it still opened the 32 bit version. (I had to be sure I was not running 64 bit Photoshop when I started the VBA program).  CS5 was still installed but not being used.
    I just uninstalled CS5, leaving CS6 installed.  For some reason, this left the VBA program disrupted in that the References (which you set in the VBA code window with Tools > References) no longer appear to be valid.  I am unable to set a new Reference to Photoshop.Application and the program has become unusable.  That is, the "Available References" no longer list Adobe Photoshop CS6 Type Library or Adobe Photoshop CS6 Object Library.  I browsed to the the file C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\TypeLibrary.tlb to add this reference manually.  The programs still does not compile (i.e., Dim appRef As New Photoshop.Application  causes an error "User Defined Type not defined").  I get the same failure to compile if I browse to and install a reference to the 32-bit version, C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the "Adobe Photoshop CS6 Object Library".  I have tried to manually set this to C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Photoshop.exe or to the 64 bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the file location of the Object Library. 
    I very much need help from someone who knows how to fix this problem in transitioning from CS5 to CS6 for using VBA.
    Thank you,
    EGibbon

    There are global keys that get overwritten with each version of Photoshop. Photoshop.Application for example gets set for each install of Photoshop. When you uninstalled CS5 those keys got removed.
    Can you install CS6 again? You don't need to uninstall. Just install again if it will let you.
    I have a script that wil set them but I don't really like to use it on other folks machines as it messes with the registry and I don't want to make it worse for you.

  • Downloaded Epsom printer app need help to set printer up on iPad 3

    Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

    It's Epson, not epsom.  Epsom refers to epsom salt (magnesium sulfate).
    ... Anyway, iPads don't have printers directly set up.  You might interface with a printer over a WiFi.  That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
    If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

  • Help on Setting up Web Cache.

    Hi,
    I need help for setting up OAS Web Cache, whether the following setup is correct. I’m new to this.
    When I login to http://server2.domain.com:8300/appname1/, the display URL is changed to http://server2.domain.com:7778/appname1/. However there is no activity in the Web Cache Statistics.
    We have OAS Web Cache standalone installed on one server using port 80 (e.g. server1.domain.com) and OAS Application Server (HTTP & J2EE) installed on another server using port 7777 (e.g. server2.domain.com).
    Currently, when our user login to the application, they use the following URLs:
    http://server2.domain.com:8300/appname1/
    http://server2.domain.com:19000/appname2/
    I have setup OAS Web Cache as follows:
    Listen Ports:
         Cache Name: server1.domain.com-WebCache
         IP Address: ANY
         Port: 7778
    Origin Servers:
         Host: server2.domain.com
         Port: 7778
         Routing: enabled
         Ping URL: /
         Protocol: HTTP
    Site definitions (two entries)
         Hostname: server1.domain.com
         Port: 80
         URL Path Prefix: (blank)
         Default: No
         Aliases (Host Name: None, Port: N/A, URL Path Prefix: N/A)
         Hostname: server2.domain.com
         Port: 7778
         URL Path Prefix: /
         Default: No
         Aliases (Host Name: None, Port: N/A, URL Path Prefix: N/A)
    Site to Server Mapping:
         Site                    Origin Server     
    Priority Host Name     Port URL Path Prefix ESI Content Policy Host Name     Port
    1 server2.domain.com 8300 /appname1/ Unrestricted      server2.domain.com     7778
    2 server2.domain.com 19000 /appname2/ Unrestricted      server2.domain.com     7778
    3 server2.domain.com 7777 Unrestricted      server2.domain.com     7778
    4     *      7777 Exclude Fragments server2.domain.com     7778
    5     *      *           Exclude Fragments server2.domain.com     7778
    And in server2.domain.com, the following has been set in httpd.conf
    ServerName server2.domain.com
    UseCanonicalName On
    Port 7777
    Listen 7777
    Listen 7778
    Listen 19000
    <VirtualHost server2.domain.com:8300>
         Port 7778
    </VirtualHost>
    Any advise is appreciated.
    Thanks,
    Lian

    as mentioned above, All that you need is a optical cable (a toslink) and that will provide you with the 5.1 sound output. BUT and this is important, the Game or Movie must support 5.1 for you to get 5.1 sound (not a lot of Mac games have 5.1 output) also you will need to ensure that you setup the right settings on your sound Preference panel. You dont need any additional boxes or cables as long as your 5.1 speaker system accepts 5.1 audio via digital toslink (eg optical cable). the z5500 is suitable and will give you 5.1 sound if used with a game or movie that has 5.1 sound output.
    Good luck and enjoy the sound

  • Help on setting up 5.1 speaker system

    Hi there, I have very recently changed over from a windows PC to a Mac (I bought it last week)
    and i was hoping for some help on setting up a proposed 5.1 speaker system. I am looking to buy the Logitech z5500 system and I was wondering if I need any other hardware in order for it to operate without any problems.. maybe things like extra sound card? i understand that there is a digital out slot - what type of cabling would i need in order to connect it up this way?
    any help would be very well received.
    thanks for any time in advance!

    as mentioned above, All that you need is a optical cable (a toslink) and that will provide you with the 5.1 sound output. BUT and this is important, the Game or Movie must support 5.1 for you to get 5.1 sound (not a lot of Mac games have 5.1 output) also you will need to ensure that you setup the right settings on your sound Preference panel. You dont need any additional boxes or cables as long as your 5.1 speaker system accepts 5.1 audio via digital toslink (eg optical cable). the z5500 is suitable and will give you 5.1 sound if used with a game or movie that has 5.1 sound output.
    Good luck and enjoy the sound

Maybe you are looking for