Help Please: Can't run 1280 x 1024 after update (Solved)

My display has changed to 1024 x 768, and my monitor is not listed in gnome display settings. Was working fine up until only minutes ago. Display went to sleep while I was away and when I woke it the settings were changed.
What can I do?
Thank you. Brian
Edit:
After looking around I think my xorg.conf file changed.
When I re-run 'Xorg -configure' it returns an error stating that the number of screens detected does not match...
The current log file Xorg.0.log [1], an old log file Xorg.12.0.log [2], and the log from the configure command above Xorg.configure.log [3] can be viewed here.
The following are snippets of resolution section from [1] and [2].
Previously Working
[162994.695] (II) [drm] DRM interface version 1.4
[162994.699] (II) [drm] DRM open master succeeded.
[162994.699] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[162994.699] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[162994.699] (==) NOUVEAU(0): RGB weight 888
[162994.699] (==) NOUVEAU(0): Default visual is TrueColor
[162994.699] (==) NOUVEAU(0): Using HW cursor
[162994.699] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[162994.699] (==) NOUVEAU(0): Page flipping enabled
[162994.806] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[162994.920] (II) NOUVEAU(0): Output TV-1 has no monitor section
[162995.026] (II) NOUVEAU(0): EDID for output VGA-1
[162995.026] (II) NOUVEAU(0): Manufacturer: EPI Model: e784 Serial#: 5248
[162995.026] (II) NOUVEAU(0): Year: 2004 Week: 14
[162995.026] (II) NOUVEAU(0): EDID Version: 1.3
[162995.026] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[162995.026] (II) NOUVEAU(0): Sync: Separate
[162995.026] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[162995.026] (II) NOUVEAU(0): Gamma: 2.38
[162995.026] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[162995.026] (II) NOUVEAU(0): First detailed timing is preferred mode
[162995.026] (II) NOUVEAU(0): redX: 0.650 redY: 0.319 greenX: 0.300 greenY: 0.600
[162995.026] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.108 whiteX: 0.312 whiteY: 0.328
[162995.026] (II) NOUVEAU(0): Supported established timings:
[162995.026] (II) NOUVEAU(0): 720x400@70Hz
[162995.026] (II) NOUVEAU(0): 640x480@60Hz
[162995.026] (II) NOUVEAU(0): 640x480@67Hz
[162995.027] (II) NOUVEAU(0): 640x480@72Hz
[162995.027] (II) NOUVEAU(0): 640x480@75Hz
[162995.027] (II) NOUVEAU(0): 800x600@56Hz
[162995.027] (II) NOUVEAU(0): 800x600@60Hz
[162995.027] (II) NOUVEAU(0): 800x600@72Hz
[162995.027] (II) NOUVEAU(0): 800x600@75Hz
[162995.027] (II) NOUVEAU(0): 832x624@75Hz
[162995.027] (II) NOUVEAU(0): 1024x768@60Hz
[162995.027] (II) NOUVEAU(0): 1024x768@70Hz
[162995.027] (II) NOUVEAU(0): 1024x768@75Hz
[162995.027] (II) NOUVEAU(0): 1280x1024@75Hz
[162995.027] (II) NOUVEAU(0): Manufacturer's mask: 0
[162995.027] (II) NOUVEAU(0): Supported standard timings:
[162995.027] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
Currently Not Working
19.491] (II) [drm] DRM interface version 1.4
[ 19.491] (II) [drm] DRM open master succeeded.
[ 19.491] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 19.491] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 19.491] (==) NOUVEAU(0): RGB weight 888
[ 19.491] (==) NOUVEAU(0): Default visual is TrueColor
[ 19.491] (==) NOUVEAU(0): Using HW cursor
[ 19.491] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 19.491] (==) NOUVEAU(0): Page flipping enabled
[ 19.550] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 19.670] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 19.730] (II) NOUVEAU(0): EDID for output VGA-1
[ 19.730] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 19.730] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 19.850] (II) NOUVEAU(0): EDID for output TV-1
[ 19.850] (II) NOUVEAU(0): Output VGA-1 connected
[ 19.850] (II) NOUVEAU(0): Output TV-1 disconnected
[ 19.850] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 19.850] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 19.850] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.850] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 19.850] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.850] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 19.850] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 19.850] (==) NOUVEAU(0): DPI set to (96, 96)
Last edited by bsquared (2012-05-06 18:13:13)

[ 19.550] (II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
[ 19.670] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 19.730] (II) NOUVEAU(0): EDID for output VGA-1
[ 19.730] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 19.730] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 19.730] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
With these, I'm not sure running "xrandr -s 1280x1024" will work.
I think you need to use something like:
Section "Monitor0"
Identifier "VGA-1"
Modeline "1280x1024_75.00" 138.75 1280 1368 1504 1728 1024 1027 1034 1072 -hsync +vsync
Option "PreferredMode" "1280x1024_75.00"
EndSection
Use the "official" modeline calculator to get the Modeline (refresh rates from the manufacturer website, I hope), restart X, and there you have it. It worked for someone once: https://bbs.archlinux.org/viewtopic.php?id=140496
Last edited by DSpider (2012-05-06 07:20:59)

Similar Messages

Help please, can I run windows ME 4 a visio

Hi,
I was a proud owner of a zen touch until in went wrong. I'm still very happy with the creative mp3 players and was looking to get the vision M. However, I am using windows ME, Will it work at all with ME and if so will i lose any of the features?any advise would be great, but i cant aford to buy windows xp and a new mp3 player...
thanks rob?

It says right on the box and on the package requires Windows XP. The support for Windows ME/2000/98 is VERY limited to song transfers via Windows Media Player 9 ONLY. You will most likely recieve an "Easy CD" with your package, it is this cd that you would use to install the necessary software on Windows ME for it to work. But still its a waste of money if you want a new player with Windows ME support.

Please Help! Can't open Safari, I-Tunes after update download.

This happened after I ran a software update and downloaded the new I-tunes, Quicktime, and the latest security update.
I got an almost full disk message, but the downloads were completed ok. I was told to restart, but a bug hit at that point and I held down the power key to close down.
When I booted up again, all seemed normal, but
now when I click on the Safari and I-tune icons they blink, but then don't open.
Any ideas on what happened and how to link up the finder and these programs again? Is this a case for the famous Pram zap?
(Other, such as I-photo etc. are not affected. On the other hand Mac help, any html safari page, and software update are all inoperative.)
Many thanks for any suggestions!
John
Powerbook G4 Mac OS X (10.4.7)

The solution was to use the original
Tiger DVD to re-install the OS. I had let the disk space on the startup disk get too low, and a download corrupted some of the OS.
Thanks to all for the help!!!!!!
John

HT204380 Help please. My FaceTime do not work after update system ios7. And generally disappeared from the menu

I do not know what to do.
If you come into contact, then the function FaceTime is frozen
Please help

Yes. And since you aren't backed up, you may have to use Prosoft Data Rescue to try to recovery any information that is critical. First though, do you have another Mac you can hook this one up to using Target Disk Mode?
If you do, that's another way to rescue information. Target Disk Mode is explained here:
http://docs.info.apple.com/article.html?artnum=58583
Similarly, if you have a bootable external hard drive, you can try to boot off that with the Startup manager:
http://docs.info.apple.com/article.html?artnum=106178
To rescue your information. This at least will allow you to do further analysis to see what data corruption might have happened. If the drive is invisible when booted off another, that may indicate a directory issue. But first let's see if we can attach or boot off another and see the internal drive of the machine.

Due to invalid SIM card message can't run my iphone 4 after updating to iOS 7.0.2

Hi,
I updated my iphone 4 to iOS 7.0.2 and iTunes 11.1.1 but have not been started yet due to pops up a message " INVALID SIM CARD" though sim is active as well as pin is unlocked. Need your feedback soon.
Regards
Robin
iPhone 4, iOS 7.0.2, iTunes 11.1.1
<Personal Information Edited by Host>

Remove the current sim, clean the contacts, re-install the sim.
Contact your wireless provider and get a new sim.
Has the iPhone been previoulsy jailbroken or modified to work with
other than the original provider?
FYI: Not wise to post your personal information in a public forum.

Help:How can I run the J2EE Client Application? Thanks

Help:How can I run the J2EE Client Application that will access the remote J2EE1.4 application server which runs on another host computer?
I have developped a stateles senterprise java bean name converter and deloyed it in the j2ee1.4 application server on the host machine A. The converterbean provides the remote home interface and remote interface. At the same time I have developped the j2ee application client named convertappclient. When I access the conveter bean at host computer A through the script 'appclient.bat' as 'appclient -client convertappclient.jar', the client can access the bean sucessfully. Now I want to access the bean through the script 'appclient.bat' at host computer B,what files should I copy from host computer A to host computer B;and what the command line should be like? Thanks!
The following are the code of the enterprise java bean and it's home interface .
The client code is also provided.
The enterprise java bean:
package converter;
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.math.*;
public class ConverterBean implements SessionBean {
BigDecimal yenRate = new BigDecimal("121.6000");
BigDecimal euroRate = new BigDecimal("0.0077");
public ConverterBean() {
public BigDecimal dollarToYen(BigDecimal dollars) {
BigDecimal result = dollars.multiply(yenRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public BigDecimal yenToEuro(BigDecimal yen) {
BigDecimal result = yen.multiply(euroRate);
return result.setScale(2, BigDecimal.ROUND_UP);
public void ejbCreate() {
public void ejbRemove() {
public void ejbActivate() {
public void ejbPassivate() {
public void setSessionContext(SessionContext sc) {
The bean's remote home interface :
package converter;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface ConverterHome extends EJBHome {
Converter create() throws RemoteException, CreateException;
The bean's remote interface:
package converter;
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
import java.math.*;
public interface Converter extends EJBObject {
public BigDecimal dollarToYen(BigDecimal dollars) throws RemoteException;
public BigDecimal yenToEuro(BigDecimal yen) throws RemoteException;
The j2ee application client:
import converter.Converter;
import converter.ConverterHome;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import java.math.BigDecimal;
public class ConverterClient {
public static void main(String[] args) {
try {
Context initial = new InitialContext();
System.setProperty("java.naming.factory.initial","org.jnp.interfaces.NamingContextFactory");
System.setProperty("java.naming.provider.url","jnp://10.144.97.250:3700");
Context myEnv = (Context) initial.lookup("java:comp/env");
Object objref = myEnv.lookup("ejb/SimpleConverter");
ConverterHome home =
(ConverterHome) PortableRemoteObject.narrow(objref,
ConverterHome.class);
Converter currencyConverter = home.create();
BigDecimal param = new BigDecimal("100.00");
BigDecimal amount = currencyConverter.dollarToYen(param);
System.out.println(amount);
amount = currencyConverter.yenToEuro(param);
System.out.println(amount);
System.exit(0);
} catch (Exception ex) {
System.err.println("Caught an unexpected exception!");
ex.printStackTrace();
}

Surprisingly I find an upsurge in the number of posts with this same problem. I recently found a post which gave a nice link for this. Follow the steps and it should help:
http://docs.sun.com/source/819-0079/dgacc.html#wp1022105

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

The Mac OS X and iOS versions are separate products

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

How can i run a executable right after a rman job has run?

How can i run a executable right after a rman job has run?
I have a rman job that execute every night. The backup is local.
I want to have a duplicate of the backup on another machine.
I want the executable to sync the directory to execute right after the rman backup.
How can i do this using the job scheduler?
Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file system

Hi,
If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
Instructions are here
Create Event based job
Hope this helps,
Ravi.

I am getting run time error 6034 after updating iTunes to new version.Any help?

I am getting run time error 6034 after updating iTunes to new version.Any help?
I tried different ways to resolve it like uninstall/install itunes
I am also getting error message on iTunes helper.exe

Hi isush!
I have an article for you that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I can't open the "Keepsafe" App after update.

I can't open the "Keepsafe" App after update it to the latest version,
When i click on the app and after 20 second it's quickly goes back to the home screen,
I've tried reopening this App and restarting my iphone but still not working.
Please Help me to restore my data (more than 2,000 pics) in this App.
Best Regards

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Then reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Why can't I access my music after updating to iOS 5?

why can't I access my music after updating to iOS 5?

Same problem here. After installing iOS 5, restoring, and syncing... when I clicked on the music icon on my iPad, none of my songs were there. All I saw was "download music from iTunes store." But, on iTunes, when I clicked on my iPad icon (then Music), it showed that all of my songs were synced!
So, this is what worked for me, I rebooted my iPad.
I turned off my iPad by holding down the sleep button for about 5 seconds, then the "Slide to power off" came up, and I powered off my iPad.
Then, I started it up again, and clicked on the music icon on my iPad, and now all of my synced music showed up.
I hope this helps some of you guys out there.

I can't open my apps store after updating to ios 6.... so frustrating...

i can't open my apps store after updating to ios 6.... so frustrating... i already tried setting the date and time but it didn't work.:( pls help...

Use iTune to update your apps.
Check for Updates (bottom right) in iTune. When download is completed, sync to iPad.
http://i1224.photobucket.com/albums/ee374/Diavonex/8afe4ddede4f4fabb4e819174239d df4.jpg

Hi, may i know how can i get all data back after update ios 6

Hi,
May i know how can i get all data back after update ios 6 and all my data lost ?

You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
apl

Itunes will not run on my pc after update: see error messageProblem Event Name:     BEX

Itunes will not run on my pc after update, i get this error message:
Problem Event Name:          BEX
Application Name:               itunes.exe
Aplication Version               10.7.0.21
Application Time Stamp          504d85d9
Fault mode Name:               Quicktime.qts_unloaded
Any Ideas on a fix??

Fault mode Name:               Quicktime.qts_unloaded
Try updating your QuickTime Player to the most recent version. Does that clear up the launch errors?

Help Please: Can't run 1280 x 1024 after update (Solved)

Similar Messages

Maybe you are looking for