HELP!!!!!!! Please look at this and try to help me...Please

Okay I just recently got an Ipod whih is gret and all but my problem is with this Itunes I bought four shows 1 song and a video. But 2 three shows and a video only downloaded . The other four would download then start all over again.This is really ticjing me off because I've been trying to get these shows on my ipod for hours and my computer has been on for hours. Also the process to recievethe shows take extremely long so what am I to do??? Someone Please help me..

The iTunes store has been unavailable for more than three hours or more (6pm EST until now - 9:20 pm), so I expect this is where your problem lies. I guess we will just have to wait for Apple to fix the fault.
Part downloads should resume when the store becomes available. You will see the 'unavailable' message if you go to the Store menu in iTunes and then scroll to Check For Purchases... you may have to log in if you do not have auto log in enabled.

Similar Messages

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Guys I need help please read this and try to understand it

I want to know that what does a new driver has to do with modem that it makes noises like "click click" during the gameplay...
Right now i am using the old version that came with the box.It is 43.45 that has been released almost an year ago.Believe me guys it works almost perfect no noise and nothing.
If i come into 2004 then the latest version is 56.72 .I've heard that nVidia has uploaded this driver on april 1st (Happy fool day from nVidia). Thus guys i wish to come into this new year and i want to update my driver,and when i install this driver it will give me trouble from the modem. Couple of more things i have checked and they're the driver that came with the box is by DETONATOR and these days the drivers says FORCEWARE and the second thing is that the old software that comes in CD from nVidia doesnt contain "DIGITAL VIBRANCE" but all new drivers has it. Could this problem is from here? I am totally puzzled first i thought that there is something wrong with the graphic card but when i checked it was modem.When i changed the modem same problem.I changed the slot, same thing. Thought there is a virus or spyware but there was not.Hardware is ok because old version is working fine.
PLEASE GUYS I NEED ALL OF YOUR SUGGESTIONS DONT IGNORE MY PROBLEM
GRAPHIC CARD is MSI nVIDIA FX-5200
MB is MSI 865P-NEO
Modem is CONEXANT
One more thing i want to mention
if i turn on pc and start playing games(any 3D games) will run perfect on any driver whether it is new or oldest. But if i connect to internet with modem and later disconnect it and then start playing games or any 3D presentation the modem starts crying (CLICK CLICK) and this is the same sound that comes when we start connecting(dialing, probably when it gives signal) the internet.
In this situation i have to completely turn off my pc and also unplugging it (DISCHARGING ELECTRICITY). and then, when i turn on the pc and start any game without connecting to internet everything runs fine (On the new drivers)....
Now as i have mentioned before i changed the slots removed and even reinstalled.Nothing happens just a click click sound.
but for the old driver everything runs fine even if i am online and watching 3D presentations or playing games....
So anybody ????????????????????????

assuming its a pci one as he suggests it may well be an irq thing
try playing swap the pci slot with it
'

ZEN SLEEK IS MESSED UP! please read this and try to he

ok hello. i just got the zen sleek for christmas. i previeosly had the muvo tx/fm mp3 player...... so i stupidly thought that i knew everything. so (before i installed the disk thing that comes with it) i charged it up and plugged it into my comp. THEN i started to read the directions! They said to NOT plug in your mp3 player, so i unplugged it quikly and tryed to turn it on to make sure everything was ok. It wasn't. Now my Zen has the little paper with arrows around it logo. but the arrows are not dark. which means that i could safley remove the hardware from the comp. the arrows were never dark. i installed the sisk and tryed to plug in my Zen sleek again, but now my computer isnt even readng it!!!!!! PLEASE HELP ME IN ANY WAY YOU CAN!!!
P.S: you can also email me at: [email protected]

of course. but when i open the little explorer deal icon, its not even reading that i have an mp3 player connected. but it is connected to my USB port

Actually i want to retrive all the customer information present using p_cusid,if there is no customer i want to create it so pleas look into this and help me

CREATE OR REPLACE procedure first_project_1(p_cusid in number,
c_id in number,
name in varchar2,
db in date,
ac_type in varchar2,
adres in varchar2,
bid in number,
city in number,
loc in number)
is
cus1 banks_customers_accounts%rowtype;
no_customer exception;
cursor c is select cus_id,names,dob,acc_type,address,b_id,city_id,location_id into cus1 from banks_customers_accounts where cus_id=p_cusid;
begin
open c;
loop
fetch c into cus1;
dbms_output.put_line(cus1.cus_id||cus1.names||cus1.dob||cus1.acc_type||cus1.address||cus1.b_id||cus1.city_id||cus1.location_id);
exit when c%notfound;
end loop;
exception
when no_Data_found then
dbms_output.put_line('customer does not exists');
raise no_customer;
end;
exception
when no_customer then
insert into banks_customers_accounts values('c_id','name','db','ac_type','adres','bid','city','loc');
end;

Moderator Action and Comment:
This duplicate is locked.
Multi-posting is just as rude as asking for immediate responses from people in a user-to-user online forum.

My power button doesnt work. Ive seen someone who has reconfigured their buttons, so that if they press both volume keys phone turns off. Ive looked into this, and it seems to use a jailbroken app. Can I do this with a non jailbroken phone?

This person was able to choose which action, (shaking the phone, pressing both volume keys) turned the phone off/sent it to sleep instead. I have a 3gs.

Sounds like a very uncomfotable situation. This is, however, user-to-user technical support forum. Your post is really outside of what's appropriate here. For an issue with the store, I would take it up with the manager directly or, if you don't get a hearing, ask for the name of the district manager. For Apple Care, you would also need to request to speak to a supervisor.
If all else fails, write a letter to corporate headquarters. See the Contact Us link at the lower right.
Best of luck.

Theme looking different before and after previewing an advanced style

Hello,
i have a problem with a theme looking different before and after previewing an advanced style in mapbuilder Ver11_1_1_5_B110527
My style xml looks like this:
<?xml version="1.0" ?>
<AdvancedStyle>
    <CollectionStyle>
      <style name="color_style" shape="polygon"/>
      <style name="line_style"/>
</CollectionStyle>
</AdvancedStyle>It is a combination of a color style and a line style styles:
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
    <desc/>
    <g class="color" style="fill:#B6D1CA">
        <rect width="50" height="50"/>
</g>
</svg>
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<desc/>
<g class="line" style="fill:#969696;stroke-width:2;stroke-linecap:BUTT">
    <line class="base"/>
</g>
</svg>The styles and theme are created using insert statements, and not the mapbuilder.
When i take a look at the theme preview in mapbuilder, it will look like this: http://dl.dropbox.com/u/22117905/before_preview.PNG
Now i open up the advanced style and hit the preview button.
If i take another look at the theme preview, it will now look like this (and this is the desired output btw.): http://dl.dropbox.com/u/22117905/after_preview.PNG
Now my question is, why does the same theme look different, after previewing the advanced style?
I tried clearing the cached geometries and metadata cache of mapviewer, but that didn't help.
Apart from previewing every style, what can i do to make sure that the themes are styled correctly?
Thanks for help in advance,
Dirk

Hello Joao,
i just found the error. It is in my pl/sql package where i create the styles.
Mapbuilder showed the staly as in my first post, but that i created looks like this
<?xml version="1.0" ?>
<AdvancedStyle>
    <CollectionStyle>
      <style name="color_style" shape="polygon"/>
      <style name="line_style" shape="all"/>
</CollectionStyle>
</AdvancedStyle>Notice the "shape=all" attribute in line_style. Apperently Mapbuilder doesn't like it, if i set this in the style. After previewing or saving the style in mapbuilder, the sttribute is removed and the style is correct.
I now edited my package and rerun it, and now the themes are displayed correctly.
Regards,
Dirk

Does anybody in any kind of real support position look at this?

I submitted a post on this support community web site 2 weeks ago, and no one has submitted any kind of reply.
I noticed that there are other posts here with similar non-response times. Does anyone wiht any support knowledge
ever look at this and give any feedback?

All of us here are only end users just like you. Apple does provide support via these forums.
B-rock

Somebody please EXPERT look at this with me and try to explain the problem.

here is my site. www.subzerorefrigeration.com I have a template set up for the entire site that is at www.subzerorefrigeration.com/cityweather.html
I added two images to the bottom of the template page that say schedule service and one says schedule estimate, they slightly changed color with a mouse over. I used the mouse over command right from simply was mouse over and change to image 2 that was working fine and all. Then I ran the W3C validation and it came up with a bunch of errors for the script adobe put on the page.
Here is what I was doing.
I was looking at the schedule and estimate buttons on the bottom of a page. I do not remember what page I was on, more than likely had several open at the time.
For some reason I did a validate WC3 page and came up with a bunch of warning errors for the mouse over script in the head of the page for the schedule and estimate button .png photo switch.
THEN I think I tried to run a browser check or another check on another page and it gave me warnings for the bottom table that said footerblue has already been identified. So when I looked at the code it said Id footerblue class footerblue something like that so I took out the class footerblue and is all that did was made my table squares white again. Then I said well why don’t I try to remove the code in the head for the schedule and estimate buttons so I removed this script from the code, I would have to sadly say I was working on my template page as I think about it now,
Why in the heck am I getting ERRORS from something that ADOBE has easily put into their program. This is not something that I did maybe I do not know where? I just put a simple mouse over on the photos.
After that I lost my spry menu bar. So next I took my index page and opened it and said ok lets just save this as citydata template. I did that it asked me to save, my spry menu bar came back on all pages but only the index have the working drop downs. The other pages have background colors I do not ever remember the spry menu having but next I did also try to copy a old spy script to the spry folder. Then I almost probably nearly had a heart attack and had to lay down after I saw all the pages that were messed up.
I remember saying to myself why did these pages no update all of a sudden and I wrote them down
updated illinoisenergyefficiencyloanprogram.html
updated wellsfargofinancing.html
updated aboutus.html
updated scheduleafreeestimate.html
updated alsip.html
updated americanstandardcustomersatisfactionsurveys.html
and more than likely index.html and cityweather.dwt
These are the pages I am pretty sure I had open in Dreamweaver when this was all happening.
Do not remember if I changed the name of the menu bar? Maybe..
Now I have a spry menu bar that WORKS on the index.html page and all the other menu bars do not work. Well the ones I have looked at. HOW can that be looking at a different folder for my spry on the same site? Also worth noting is I set up a testing server for some php on the contactus.html page the other day that seems to be working now but did not seem to work the other day.
I am mainily wonderin how can I have to different / one functional and one semi functional spry menu bars on the same site? It all goes back to the same folder from what I can see.
Please take the time to helpme here. I already redid this one time because the templates did this to me.... I was doing great until I ran the validator again and discovered errors. I WAS ERROR Free before the two images. except the pages that have the weather widget on them.

tedwagner64 wrote:
I am wonderining why 150 people looked at this post and NOT ONE REPLY am I stupid or something???
Not really. It probably helps to ask questions in a less complex way. I think that on a forum, people who help want to be able to quickly see what it is they can help with and are more likely to spend their time on those questions. I don't know that for sure but it is my experience. Sometimes if I try to help someone, I do it when I have a spare 10 minutes so, I will definately focus on the one or two line posts.
For instance, if you asked, "Why does my HTML not Validate on this page?" I could tell you that it is because you can only use one instance of id="" on a single page. The validator says you have used id="background_blue" more than once. You can use class="background_blue" as many times as you like.
Martin

During CS5 master collection update, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

During CS5 master collection update on Windows 7, 64-bit laptop, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?

Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
Have you tried to manually update the individual programs?
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Please help! I am trying to change my Apple Id that used to be my mother to Mine- Every time i have it changed and i go and try and do an update it continues to ask for her old password. I really need help with this!

Phil0124 wrote:
Apps downloaded with an Apple ID are forever tied to that Apple ID and will always require it to update.
The only way around this is to delete the apps that require the other Apple ID and download them again with yours.
Or simply log out of iTunes & App stores then log in with updated AppleID.

FaceTime on my mac won't connect , I get this message every time i try to connect " please check your network and try again " my network works fine with everything please help me

Hi
I have MacBook Air , yesterday I tried to use FaceTime but it won't even connect I keep getting this message " please check your network and try again later " my network work perfectly with everything . however FaceTime works on my iPad . can someone please help me with this problem .
thank you

FaceTime, Game Center, Messages: Troubleshooting sign in issues

HT1925 hi, I try to do this and as install happens a message appears stating an older version of Bonjour can not be removed. I tried to delete all files manually, i have even tried Fully restoring my computer but no luck. Can anyone PLEASE HELP ME?

I have a PC that runs Windows XP, I can not down load any new up dates. It appears that an earlier copy of Bonjour is either MISSING from location or is damaged rendering it null. I have tried to download iTunes 10.7 and get stuck. I am so frustrated and well am in need of help. I don't know what more I could short of purchasing knew computer. I even went as far as trying full restore, that one file just cant be fixed. Any Ideas left for me to consider?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

PS CS6, help-updates errers...There was an error installing this update. Please quit and try again later. Error Code: U44M1I200 CS6 5.0.2 Update There was an error installing this update. Please quit and try again later. Error Code: U44M1I200 Photoshop

Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.7.1(CC)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Photoshop Camera Raw 8.7.1(CS6)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Photoshop 13.0.1.3
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe Photoshop 2014.2.2
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe CSXS InfrastructureCS6
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Extension Manager 6.0.8 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49

Hi,
You can visit Error U44M1I210 | Install updates and see if it works.
Regards
Kishan

Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

I have called the store with the same problem but the answer is this must be done on line. I was told to use a different browser but it has made no difference - I am still having the same problem

HELP!!!!!!! Please look at this and try to help me...Please

Similar Messages

Maybe you are looking for