Help please mic issues creative labs sound blaster

hi all i need help i have a creative 5. sound card with digital out only speakers. and when i try and use my mic on a system like msn it will not let me its like i have no audio from it at all. but if i un mute my mic it works fine but i can here my voice any help would be apreciated. I would love to be able to not here my voice in my speakers so as you can see my mic functions but i can here my voice. and if i mute it and try and use on msn i get nothing from it at all. is this because im digital out only but if i switch to analog i cant get sound as my speakers are pure digital. somone help please.Message Edited by cruser92 on 2-0-2005 04:00 AM

well i solved it with a simpl mic head set combo and switching from dig to analog all works great. and im now happy peace all case closed on my end.

Similar Messages

Optical Input on Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E with Logitech z-5

So i plugged in my Optical cord into my new sound card the Creative Labs Sound Blaster X-Fi Xtreme Audio PCI-E and it worked only in the Front right, Front left, Front centre, and the subwoofer. Now i hear i need a external decoder... but then again that my sound card should decode it as well... the place i bought my card recemended a optical cord for my card?with the?speakers i have?(the?Logitech Z-5500) How much are decoders? What should i do next? Creative seams to have limited support especialy on optical inputs.

I must have answered something like that in another thread sometime ago, but here goes:
A single SPDIF connection, optical or coaxial, will only transfer stereo in analog form; no rear or centre channels!
There are two ways you can get all speakers playing via such a connection:
() Get your speakers to upmix the audio source to play on all fi've of them
(2) Output a Dolby Digital (AC3) or DTS signal. These contain the multichannel information encoded in the stereo signal. A suitable decoder (such as the one contained in the Z-5500) will be able to analyze the signal. Unfortunately, this is something you can mostly find in movies.
So, to sum it up, no natural everyday multichannel sound over one SPDIF (e.g. no EAX, directsound3d etc.)

Good Mic for Sound Card / Creative Labs sound blaster c

Can anyone recommend a good mic for my soundblaster sound card. Not too expensi've. Currently using cheap pc mic that can with my computer. Need better mic to for vocal DJ'ing stuff.. Thanks

Is there anyone who can help me please? I'm really desperate!

Computer Crashes with Creative Labs Sound Blaster 5.1 Live Card

Several weeks ago when I booted up my computer a msg apeared saying new device found(the sound blaster card mentioned in the title) even tough it had worked for months beofre then and even the night b4. Shortly after I get a beep from the mother board and the computer crashes several seconds after start up.
I thought maybe their could be some conflicting driver issues or something so I checked the BIOS and it said the onboard sound was disabled. Restarting the computer several times it kept crashing. I removed the card, booted up the computer and everything worked fine (except the sound) and it did not crash. I tried putting the card in the other PCI slots thinking that was the problem but it crashed each time.
Right now the card it ploped on the desk and I have the Creative 5. speakers running off the onboard card on my Is7-E mobo but the sound is **bleep**ty as hell and the speakers are ligned up corectly and I am having all sorts of trouble with that. I am getting basic sound though. I havnt had time to pursue the matter untill now. Do you guys think the card for some reason is damaged or Its an issue on my computer Crashing it's
Thanks,
-Mark

Heh, srry about using the S word. Ah, I whiped all the audio drivers etc...from the guid in that link. I poped the card in, booted up the computer...alas it still crashed. So now I have to get my temp sound working again. Is their anyway to tell if a compenent is phsicly dmged? I can not be shure if this is a software issue(which I dont think it is because I followed your whipe guid) or a hardware issue. I dont understand what could of hapened to it, it simply stoped working. Im not shure why my computer crashes at start up as mentioned above and doent simply not work. Any more thoughts would be great.
-Mark

Need help please with a creative lab pc 350 3 in 1 cam

I bought this cam almost 2 years ago. We had problems installing it and several others because they keep saying a file was missing. Finally one day I sat down and got it installed so it worked great could do everything with it. Then a year ago in January my system crashed. Had to go back to the very beginning, had the wrong software to restore to manufacturers specs. Took it to Gateway, they reinstalled the software but didn't give me a copy of it. Reinstalled the cam software more than once but cannot use the cam away from the pc. can do videos but no snapshots from the video. works as a webcam. anyone know why it won't work. It says err. in the window under the mode button on the back. would really like to fix it but think it would be cost prohibiti've. even took it to a friends house to install on his computer to see if it would work. It does the same thing there as on mine. By chance are there any new drivers that might resolve this problem. Hope to have an answer soon. Thanks for any help you can give me.

hi jason thanks for the information. i went to the article suggested but there was nothing listed for the CL pc 350 cam. the following is what i found there.
How to reset and format the camera PC-Cam 880, PC-CAM 900
To completely delete all images from your camera or format its internal memory when the camera is detached from a computer system:
Power on the camera
Press the Menu (Multi Selector button) to activate the Menu options
Select the Advanced Settings icon (http://ask.americas.creative.com/wwimages/video/cam_880_format_memory.JPG">) by pressing the Right Key or Left Key, then select Format Memory. Select Yes to proceed. http://ask.americas.creative.com/wwi...tyle/arrow.GIF
Turn on the camera and then press the Snapshot button ( on the top, right hand side of camera) and the Operation Mode button simultaneously for more than two seconds. This deletes all files from the camera
Hold down the Delete button on the right hand side of the trash-can picture, until "LAST" appears on the displayQuickly press the Delete button once more "ALL" appears on the displayPress the Snapshot button
CardCam Value
By chance do you have any more suggestions. I have tried to call for information without luck. I was not able to send an email due to the fact I tried to install it at a friends house and all the identifying information I needed is on the cam. I know they are in stillwell, ok so i may just have to write them a letter and wait for a response about sending it in to be repaired, unless i can find someone local who knows about this cam.
Thank you very much for your help. CJS

Creative Labs Sound Blaster Live 7.1 24bit Digital Sound C

I have orderd the above card from ebuyer, but can not find any info for driver downloads on the creative site.
Any info greatly appreciated
Thanks
Jim

Jim,
You are absoulty rite. there is no support. I have a t7700 card and I followed the tech supports email I recieved to the Letter and NOW i have to FORMAT C: and load my OS fresh. They say it's SP2. I say I need either a new Sound Card, or a new set of T7700 surround speakers. World of Hurt I've gone through in the last four days. Now I have to start all over again. But the techies are really NICE Darn Guys that know there stuff. If you believe that I have some land in AntArtica I can sell to you cheep.
InspireT7700. Audigy 2ZS. which one is the bigger lemon?

Just got the Creative Labs Sound Blaster Sound Card

ok, hooked it up and everything, plugged my three cables into the corresponding colors, the colors from the cables, from my speakers, match the colors on the sound card. I played numerous songs, and sound is only coming out of the front two side speakers, I have fi've speakers in total, I'm using Logitech 5.1 system, so I have a middle speaker, and a sub, and two speakers in the rear, does anyone know how I can get all the speakers to play at once?
Message Edited by whatintheworld on 07-18-2007 03:09 PM
Message Edited by whatintheworld on 07-18-2007 03:10 PM
Message Edited by whatintheworld on 07-18-2007 03:10 PM
Message Edited by whatintheworld on 07-18-2007 03:11 PM

Duplicate.
Jason

Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express 1)

Hi, I've recently bought a SB X-Fi Xtreme Audio (PCI Express edition).
Before I address my issue, I'd like to point out that my rig is:
Maximus Extreme (mobo)?
Q6600 (cpu)
ATI4870 (vid card)
4Gigs of DDR3 (ram)
and my OS is Vista Home Edition (32 bit precision)?
And so after physically installing the hardware, I quickly installed everything there was on the CD- this included the drivers available on the CD. After this installation, I restarted then found most recent updates via online sources (creative.com). But even after all of this, I wasn't able to get my microphone to work. Now from my understanding, the jack is shared between Line-In and Microphone and I'm supposed to configure this setting. And so I tried to do that, but my only problem was that I was unable to use any of the available features. After researching for a few hours I found out that I, appearently have to uninstall everything that I had installed and then reinstall everything from online sources (from creative.com-- latest drivers for vista 32 bit). But even then, I still can't use my mic or configure the settings so that I could use microphone instead of Line-In.
Now going back to my actual question, how do I configure the settings so that I could use Microphone instead of Line-In?

ERe: Issues related to Sound Blaster X-Fi Xtreme Audio (PCI Express )[ Bumping.
Almost the same problem here.
Sound Blaster X-Fi Xtreme Audio edition, Windows 7 64bit.
I downloaded the latest driver from the Creative site, installed it, update with the update manager and then i installed the console.
Issue number : I DONT have your same console. I dont have a "Mode" button, im stuck in Entertainment Mode. I cant control almost nothing and i dont have all the options u have.
Issue number 2: My mic isnt working good. It's VERY low on volume, i cant be heard without the +20db boost (the only boost option i have, i cant boost more) and even with that acti've that's not that loud.
It is still working good with my onboard realtek soundcard. I cant understand what's the problem and how to solve it.
Ah, my headset is a Creative Fatality.

Microfone problem with creative audigy sound blaster

hello,
ill explain my problem
I just bought a creative audigy sound blaster SE and i installed everything
first: problem: where do i have to put the cable of my microfone? in the blue or red bus?
and if i have putted in the blue or red one, do i have to change something in my configurtation of my soundcard?
plz help!

I resolved my problem...
"thanks"

Help find the Driver CREATIVE LABS CT4810 chipset ES1373 for Win 2000. E-mail dirpt@mail.

Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].

AlexVP wrote:
Help find the Driver CREATIVE LABS CT480 chipset ES373 for Win 2000. E-mail [email][email protected]][email protected][/url].
You can start from here.
jutapa

Please Read this ! USB Sound Blaster 24-Bit External : The Story of the endless problem

In order to keep the good behavior here (I`m really pissed off !) I just?want to tell you something (this is ESPECIALLY for all the guys from the stuff)?Before 2 days I`ve decided to buy a new sound system for my room. I bought myself Creative Inspire t600 5. surround system. Cool. I was very happy. I?needed only to buy a sound card?working with 5. because I have a notebook DELL INSPIRON 50 who has only 2 canals. So in order to be everything beautiful I gave $70 for Usb sound blaster 24-Bit external. And from that time the problems began. In short :? I was using Vista but I found out that it wont work with this soundcard. The first problem : Didn`t identify the device. I tried with several drivers... Nope. No sound card with Vista.(This problem seems to appearance with many owners like me)?I pluged the usb soundcard in my old pc running XP and it worked . PERFECTLY. So I removed Vista from my notebook and intalled XP. This took me whole day to rebuild all my software. Finally it left to set up the sound drivers. The cherry of the icecream. Aaaaand ..... **bleep**. When I play?any track it CRACKLES. Again problem appearanced with many here. I tried to find out here what is the problem but unfortunately as u can see my english is quite bad?so I cant understand?what I need.I really like Creative but if they cant manage this problem I will?no longer buy their stuffs??JUST PLEASE SOMEBODY ANSWER ME IS THERE ANY SOLUTION FOR THIS OR NOT. I JUST WANT STRAIGHT ANSWERPS : Please do not delete my post. I know there are plenty like this. I dont want this crackles

well ?

When is the next update? When will Creative get Sound Blaster drivers rig

I thought this update was supposed to fix problems but instead created more problems than it fixed. Since the Sound Blaster series is Creative's main product why can't the people working at Creative spend more time on QA before a driver is released?

Can someone explain me the AOSP?
Is it posible for our tablets?

Help Please -- Routing issue

Hi All...
I have a Linksys WRT54GL Broadband Router.
I have recently signed up for DSL.
I am trying to connect my DSL to the router, but it doesn't seem to work.
My DSL modem assigns 192.168.1.65 ip to my Routers internet interface, with a Subnet mask of /24 and default gateway of 192.168.1.254.
I have setup my Router to be a DHCP server to 3 computers with IP address range of 192.168.10.X (assigned dynamically). The Router's IP address is 192.168.10.1 (that is through which i can configure the router settings).
So my coputer gets ip 192.168.10.100, Subnet mask /24 and default gateway 192.168.10.1.
Now when i am in the routers web interface, i can ping all the websites, using its ping or trace route utility.
But when i try to access a website from my PC, i can't.
When i ping my routers interface ie 192.168.1.65 (that is the ethernet port connected to the DSL modem) from my PC i can but when i try to ping the DSL modems gateway 192.168.1.254 or any other website i cant.
So in a way i can only go as far as the ethernet / internet interface on my router and not beyond that.
Can anyone help me please.

Just did.. and no luck... I disabled Antivirus, and Windows firewall on my PC.. it didn't work.
I tried connecting to the net from the second PC... no luck. Did ipconfig /renew to get a new lease on the second machine.. got a new lease but couldnt connect to the net.
Same issue .... cannot get beyond Routers internet interface.
The routing table on the router looks like this....
Des Lan IP      SM    Gateway                Hop        Interface
192.168.1.0     /24      0.0.0.0                 0         WAN
192.168.10.0   /24      0.0.0.0                  0          Lan&Wireless
0.0.0.0          0.0.0.0   192.168.1.254     0          WAN
I am thinking more on the lines of routing not working, but then again i could be wrong. Any suggestions?Message Edited by japi_s on 05-11-200711:38 PM

Creative SB080 Sound Blaster 5.1 Dri

i have SB080 (model) and am searching for a driver 4 windowx Xp but not found ....Help Me Plzzz.it may also know as ES37 .. but on the cards' bord it is SB080 i really cant understand what is going on .

Heh, srry about using the S word. Ah, I whiped all the audio drivers etc...from the guid in that link. I poped the card in, booted up the computer...alas it still crashed. So now I have to get my temp sound working again. Is their anyway to tell if a compenent is phsicly dmged? I can not be shure if this is a software issue(which I dont think it is because I followed your whipe guid) or a hardware issue. I dont understand what could of hapened to it, it simply stoped working. Im not shure why my computer crashes at start up as mentioned above and doent simply not work. Any more thoughts would be great.
-Mark

Help, please - Firmware issues

I posted on Christmas on this forum about an iPod shuffle I had received for Christmas that was having Firmware issues. I connected it to the computer via the dock, downloaded iTunes, installed all necessary software, updated the iPod as necessary and sync-ed it. When I went to play it, I got nothing. The blinking lights told me that the firmware was damaged and it needed to be restored to factory settings. I figured out that I had not disconnected it properly from the computer after updating it (light was still blinking), so I connected it again and restored it to factory settings. Then I sync-ed it again. I did this a few times, always getting the same response from my iPod: firmware damaged, needs to be restored to factory settings. I thought I had broken it, but my dad (former techie) told me that if it had been restored to factory settings and it still wasn't working, there was something wrong with the product.
TOday we went and exchanged it. Here I am, sitting here at my computer. I updated the iPod as necessary sync-ed it with my music and I am ready to go. When iTunes tells me it's okay and the light on the iPod is no longer blinking, I disconnect it, restart the iPod, plug in my earphones, press play three times like the directions say I have to do to get to the first song, and...
FIRMWARE DAMAGED, NEEDS TO BE RESTORED TO FACTORY SETTINGS...
NO!!!
I restored it.
I sync-ed it.
Nothing.
I restored it again.
I sync-ed it again.
Nothing.
Now, I am here.
Is it me? Am I doing something wrong to it? Is that it?
Somebody please help me.
God bless,
Lissa

Figured out the problem... was sync-ing the iPod wrong. Doing it from library rather than the source list.

Help please mic issues creative labs sound blaster

Similar Messages

Maybe you are looking for