Help Please: WLC 2106 and RADIUS

Hello,
In the WLC there are two groups (say A and B). How would I take group B and point it to a RADIUS server for authentication please? Looking for a step by step answe please. The server is ping reachable. I have seached but did not see any difinitive answer.
Thanks!

You can achieve what you want per WLAN.
configure authentication servers order in wlan settings as per this image:
HTH
Amjad
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".

Similar Messages

Help please? iTunes and my PC (XP SP3) won't recognize my iPod Touch. I aleady tried the Apple trouble site (recharged iPod; checked USB connections; restarted iPod; restarted PC; reinstalled iTunes; ensured no software conflicts)

Help please? iTunes and my PC (XP SP3) won't recognize my iPod Touch. I aleady tried the Apple trouble site (recharged iPod; checked USB connections; restarted iPod; restarted PC; reinstalled iTunes; ensured no software conflicts)

Finally got it working.. Ok so First read this
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
Just start with verifying the Apple Mobile Device Support is up and working, Just follow the steps here:
http://support.apple.com/kb/TS1567
After Stopping it and Restarting and it is still not reconizing your device Then start uninstalling
Start with: Itunes, Quicktime, Bonjour, Apple Software Update, Apple Mobile Device.
I had an issue uninstalling Apple Software Update, and was unable to get it off my computer.
But after all that download and reinstall itunes.
After doing all that i was able to get mine to show up in itunes
Hope it helps

HI,I AM THE NEW MEMBER OF I PHONE 4 FAMILY.ANY ONE AN GUIDE ME , HOW TO ADD MY NOKIA PHONE BOOK CONTACTS IN I PHONE 4 . I USES NOKIA E-5 MODEL. KINDLY HELP PLEASE. THANKS AND BEST WISHES . SHRIJI MAHARAJ

HI,I AM THE NEW MEMBER OF I PHONE 4 FAMILY.ANY ONE AN GUIDE ME , HOW TO ADD MY NOKIA PHONE BOOK CONTACTS IN I PHONE 4 . I USES NOKIA E-5 MODEL. KINDLY HELP PLEASE. THANKS AND BEST WISHES . SHRIJI MAHARAJ

Hi, I see I haven't had any responses but these problems haven't been fixed.
I still haven't been able to transfer purchases from my phone to my comp so consequently have stopped purchasing on my phone.
I bought a couple of albums recently via itunes on my comp, and tried to tranfer them to my phone via a playlist, but the sync often crashes. One album transferred except for one song, and the other hasn't at all. What happens is that when I autofill from a playlist it often hangs for ages on the first song and then I have to quit the application altogether as nothing happens for ages. Basically, the whole Itunes software freezes.
After this I find it hasn't transferred any songs, but they do appear greyed out on my phone, which means it has transferred some basic data such as the titles, but not the song itself. When I try to repeat the process to complete the transfer Itunes tells me that it can't transfer because the songs are already on the phone, but they are not!! I can't click or remove on the greyed out items, so now I have a couple of almost full albums on my computer that I can't tranfer or install on my phone, and a whole bunch of greyed out songs on my phone that I can't play or remove!
The rest of the problems as above still stand. I downloaded the latest itunes OS updates but nothing's changed. I haven't done the very latest iphone update yet though because it says you need to make sure your stuff is backed up, and I don't want to lose the purchases I made on the phone that I can't transfer to my comp. I'm planning on uninstalling itunes completely and reinstalling but I have little faith that this will fix the issue.
Can someone please help at all?? I'm so sick of this!

WLC-2106 and multiple interfaces on the same network

Hi there,
I recently created a TAC request to the Cisco support regarding our WLC-2106, but they could not help me. Basically I just learned that you can create new interfaces for the wireless LAN controller and then dedicate them to a given wireless network (SSID). This way I could more effectively utilize network bandwidth also. Problem is that all of the interfaces have to be in a different network segment in order to work, which is not what I want. I specifically want to have several interfaces on the same network segment.
Has anyone tried to accomplish the same?

Basically what I've misunderstood is that all the traffic generated by our wireless clients have been going through the single 100Mbit/s ethernet port on the wireless LAN controller (management interface), and to mitigate this I thought I could create new interfaces (ports) and dedicate those to given WLAN networks.. I see now that this is not supported. Not inside the same network at least.
So, by reading further and consulting my best friend Google I learned about a setting called "AP Mode". Changing that from Local (the default) to H-REAP the APs should not route their traffic anymore through the management interface on the wireless controller, but instead route all the client traffic directly to the local LAN. This way you effectively remove the 100Mbit/s bottle-neck when all the APs were using the management interface both for configuration and client data traffic.
It seems you also have to enable H-REAP Local switching from a given WLAN network in addition to changing the AP Mode of your access points to H-REAP. I'm still in the testing phase here so should anyone have any insight to this, I'd be greatful to hear more.

WLC 2106 and iPhones

Just recently I am having issues with my WLC 2106 WiFi network and iPhones. For the past week, the iPhones have been locking up the network much like as it was described with the ARP issues with the exception that what I have been reading, this issue did not effect the 2100 series.
I've done searches but have not found anything applicable to what is happening now.
Any help will be GREATLY appreciated.

It's running on v. 4.0.217.0. Right now I'm controlling who is accessing the wifi via MAC filter to prevent anyone with an iphone to log on but that just doesn't cut it since there's a lot of visitors coming in to use the wifi.
I won't be able to go in and do more testing for a week or two to get that debug log.
But this seems to be a common issue with at least the 2106s. As soon as anyone logs in with an iphone, the controller locks up and the only thing to do is reboot. It only fairly recently started happening so maybe it's only with the newer iphones?

WLC 2106 and Linksys Bridge WET610N works with 7.0.116.0 release?

Hi all,
i'm having troubles with WLC 2106 controller and several wireless bridges, so i'd like to know if i can fix it in some way.
My environment is as follows:
1 WLC 2106 with 2 Aironet 1240G
I have a production appliance that needs an ethernet port to work, so i bought a Linksys Bridge WET610N to make it works via wireless.
The Linksys bridge connects to the 1240G as a client and works well, but the appliance connected to the ethernet port of the bridge is unreachable.
Searching for the problem, i found that the wlc act as a proxy arp for the wireless clients and being the ethernet appliance a "passive" client, the controller isn't aware of it.
My WLC is running the 7.0.98.0 firmware. In the release notes for the 7.0.116.0, in the "Non-Cisco WGB Support" seems to state that now also non cisco bridges can work using the passive client feature. I've already enabled it on my controller but this didn't solve my problem.
Can anyone tell me if the upgrade to the 7.0.116.0 can fix it?
Thanks in advance
Riccardo Coppola

I'm not sure what (cheap) devices can do the wgb feature that is inter-brand compatible.
The thing is that the WLC enforces the rule "1 wireless client = 1 client". Meaning you can't bridge multiple clients behind a wireless clients, that just screws up roaming mechanisms etc ...
Cisco WGBs have the IAPP protocol to tell the WLC "listen, I'm a WGB wireless client and those are the wired clients connected to me, allow them on the network".
What does "universal WGB" feature does is that the WGB forwards the traffic of the client (only 1 client supported in this case !) to the infrastructure AP but the WGB never sends anything with its own mac address. It uses the client mac address as source.
This means that the WLC has no way of knowing that there is more than 1 device. It just thinks that your wired client is a wireless client.
So it's more than mac cloning since the WgB has to be the one authenticating to the infrastructure (Wpa/wpa2 whatsoever) by spoofing the client mac. The WGB is still in charge of roaming decisions and so on and so on...
I hope it clarifies the situation ?

Help Please Blackberry Z10 and Microsoft Exchange

Hi I have been a happy BB user for many years and was happily using a BB torch on Vodafone for last 3 years. Several mail boxes set up on phone, usual hotmail , gmail as well as office mail boxes via Microsoft exhange. Have never used BES
Upgraded to a Z10 and spent 3 long frustrating days trying to get the phone to talk to my SBS 2011/ Exchange 2010
Active Sync didn't work and every other attempt failed. We actually had a Microsoft engineer on site who also failed, yet connected his iphone in about 20 seconds
After many lengthy telephoe cnversations with Vodafone, their second tier technical support told me that there is a software issue and it is not possible to send and receive email for exchange mailboxes on the Z10 without BES software. I was told that this was a known issue and there would be a fix within a month. That was 2 weeks after the Z10 was launched, it's now nearly June and there still seems to be no fix in sight.
Does anyone out there know anything about this ? Is it a network specific issue with Vodafone ?
I returned the phone as it was useless if i couldn't work with my office email and went back to my trusted Torch - it is no falling apart and I need to upgrade to something very soon - getting very close to moving to a Galaxy.. Help.....

Mrhappyperson wrote:
Vodafone have been very specific that it is not possible to configure the Z10 to work in conjunction with an exchange server without runnig BES, which we don't.
The statement, made that simply, is definitely not accurate. Exchange can face OWA to the Internet, and ActiveSync can be activated within OWA, with which a Z10 (generically speaking) can indeed integrate to. But, you've still not revealed what you face to the Internet, so it's only possible to talk generically for your situation...not specifically.
As the other contributor stated, they have BB10 OS 10.1, which seems to have in their case broken this particular function. You've not stated your BB10 OS level, so all we can work from is the generic information...which is indeed that it does work (generically speaking). If you also have updated to BB10 OS 10.1 and this issue might be the same for you, but here too lacking your details makes it impossible to know for sure.
Nevertheless, Vodafone is your formal support entity...and I would defer to what they are telling you, especially since you have revealed to them the specifics that you continue to hold back here.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WLC 2106 and 802.1q

Does the 2106 support 802.1q trunks. If so what do you have to do to enable a trunk port?

The 2106 does support 802.1q trunking only. You don't have to do anything on the wlc side, Just configure the trunk port on the switch to 802.1q. Also the management and ap manager should be configured as the native vlan on the switch.

Help Please with CFbundlesIcons and where they can be found? Newbie !!

Im just about finished an ios application but when I validated the app it said about CFbundleIcons? the Icons where created in photoshop.I would like to know where in xcode5 are the file(s) located???? im a newbie and its the first time i have struck this problem.
much thanks for a quick reply- cheers :-)

Hi Tim, welcome to the forum,
have you turned BT on using the Fn+F5 key combination? BT is "off" as default unlike wireless which is "on" as default.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Urgent help please - only from and title showing in emails

Hi,
I really hope someone can help me please!!!
My boss is out of the office but is having problems with his ipad 2 and is a complete plum when it comes to technology. However, even I can't work out what's wrong, especially without being able to look at it.
He said that his e-mails are only showing the From part and Title of the e-mail and the rest is blank. The titles list to the left is fine apparently and he doesn't have the download remaining ..... at the bottom of any of the emails. Does anyone have any idea what could be causing this?
All help would be very gratefully received

1. You got to hold down the Sleep/Wake button together with the Home button
2. For approximately 10 seconds
3. Until the Apple logo appear
4. Ignore the red slider

Help Please! Genius AND WiFi not working on iPod

Hi, I'm using a first gen touch on the latest firmware. even though i have genius on iTunes, it will not transfer onto the iPod. There simply is no genius button. How can I get this working?
Also, on an unrelated note, my WiFi is completely shot. The little scroll thing will pop up for about a second than disappear, even in places where ive been using the WiFi for as long as I've had the iPod, which is about one year! I've never had any problems with the WiFi until I upgraded to 2.0 and above, does anyone know any solutions? I've reset the settings and network settings, and neither of these worked. Any help?
Any help would be appreciated!!
Message was edited by: romeboards

reset your network connection. I think it's under general settings. Same thing happened to me, and that fixed it

Script inquiry (help please :) - Crop PDF and save as JPG

I'm sure this will be an easy one for some of you. I want to have a script that takes a PDF of a cover file (usually very wide since it's printed along the front, spine, and back of the book), crops out the crop marks (I have a little code snippet that I found that can do this), prompts for the width of the front cover size (i.e. 6 inches for a 6" x 9" book), and then sets the crop box from the far right edge to the width that was input. I'm trying to put together a little tool for my company's Art Department to save them time creating jpegs of our books covers (there are a lot of them). Their current process is to place the PDF in Indesign on a 6x9 page and export a JPG from there, seems time consuming.
As an example, a cover file for one of our books, without the trim marks, is 12.625" by 9". The script would prompt a user for the width of the cover, they would input 6" and it would, ideally, set the crop box to be 6" wide and 9" high (not touching the height, since that is already correct), and then save that cropped PDF as a JPG (and not save the cropped PDF so as to leave it untouched after the process is done), preferably with an option to select the output location and even batch run it on a bunch of PDF cover files.
I'm sure this is possible, does anyone think it will be particularly easy? I don't have a lot of experience but I'm not necessarily looking for a handout since I'm not really bringing a whole lot to the table (but will take one!). Any help or pointers appreciated, or maybe someone who already has something like this could provide some help or resources to get started, even If I have to piece it together from a series of helpful URLs.
Thanks in advance for any helpful responses I'm anticipating!
Nick

Take a look at these two Acrobat JavaScript methods:
Doc.setPageBoxes():
http://help.adobe.com/livedocs/acrobat_sdk/11/Acrobat11_HTMLHelp/wwhelp/wwhimpl/common/htm l/wwhelp.htm?context=Acrobat11…
This function allows you to set the crop box. When you combine this with Doc.getPageBox(), you can then adjust the crop box to e.g. the 6" area you want.
Doc.saveAs():
http://help.adobe.com/livedocs/acrobat_sdk/11/Acrobat11_HTMLHelp/wwhelp/wwhimpl/common/htm l/wwhelp.htm?context=Acrobat11_HTMLHelp&file=JS_API_AcroJS.89.530.html
As you can see, the cConvID parameter allows you to specify the output format - and JPEG is an option.

Can Someone Help Please? Podcast and iWeb.

I have my podcast on my iWeb site and hosted with .Mac. I want to submit my podcast to other podcasting sites, but have some questions.
1) When I try submitting my rss feed url, clicking it takes me to iTunes even though it's not part of the url. Not everyone uses iTunes to play podcast, how can I set this up, and what should I be submitting. Also, some podcast sites ask for my current episode url. How do I find this?
2) iWeb doesn't allow for downloading of podcast directly from the site (at least I can't figure out how). How can I submit to other podcast sites and have people download my podcast without having to go to iTunes?
Are these solveable things, or do I have to wait for iWeb 2.0 and hope it addresses these issues?
Thanks so much for anyone's help with this.
Todd
MacBook Pro Mac OS X (10.4.8)

Already bumped
http://discussions.apple.com/message.jspa?messageID=4147654#4147654
1.) Your current episode URL is the URL for your podcast episode. web.mac.com/YourUserName/YourFolder/YourPodcastEpisode.mp3 or similar. The URL should end with the extention of your podcast format (mp3, m4v, mov, etc)
2.) A podcast is an XML file. By clicking on any valid XML file you can view updated episodes outside of iTunes. You can bookmark the xml file to "subscribe"
http://iWebFAQ.com/AllAboutRSS

WLC 2106 and Microsoft IAS and Windows XP Supplicant

For one of my SSID's I am using 802.1x with WPA2/AES. I have configured IAS on windows server 2003 and from the server message logs I am able to authenticate a user. I never complete the authentication through the eyes of the WLC though. In using debug commands on the WLC I can see an error that I can not solve.
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Received EAPOL-Key from mobile 00:23:4e:70:a9:97
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:23:4e:70:a9:97
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 00:23:4e:70:a9:97
Wed Apr 7 03:09:40 2010: 00:23:4e:70:a9:97 Stopping retransmission timer for mobile 00:23:4e:70:a9:97
I suspect my issues revolves around the message: Ignoring invalid EAPOL version (1) in EAPOL-key message
Anyone have any idea or insight on additional debug steps that can be taken?
Regards,
Justin

ERD Commander (ERD 5.0) is the version that supports Windows XP. The next version is DaRT Supported Vista and later

WLC 4400 and RADIUS accounting

Have trawled what docs there are and cant find out if the RADIUS accounting messages from the 4400 include the name of the lightweight AP handling the user session.
I'm guessing there might be a new Cisco VSA for it.
Anyone know?
Thanks

The error message could be because of any unused protocol.

Help Please: WLC 2106 and RADIUS

Similar Messages

Maybe you are looking for