Help! Problem with old phone's data to new phone.
My 4S got stolen, so I got a new one.
I initally selected the "start new iPhone" option, it copied all the apps, but no previous messages. When I realized that, I restored the new phone and then selected to restore the back up from the old phone. Now, the messages are up but I have no apps.
And I don't see the usual iPhone iTunes startup where you should see the tabs. It still shows the "Set Up Your iPhone" option.
What am I doing wrong and what should I do?
Did you use Apple's migration tool? It misses a lot of support files, especially in the Application Support directories.
You'll have to copy those files manually, or reinstall the app.
Similar Messages
-
Problems with old(ish) EIDE drive in new Neo4 system
I've been building my new system today, the only components I have retained are the optical and hard drives and the memory. System is as follows
K8N Neo4 (non SLI edition)
Athlon 64 3700+
PC3200 Crucial 1Gb (2x512Mb sticks in dual channel)
BFG 7800GT OC 256Mb
Creative X-Fi Fatality FPS
Seagate Barracuda 7200.7 120Gb (EIDE) [ST3120026A]
Seasonic S12 500W PSU
XP Pro
The problem I'm having is that while my HDD is detected in BIOS, when I boot from the XP CD, the setup runs it's 'checking hardware configuration' and then dumps me at a black screen. Disconnecting the drive allows me to continue. Here's what I've tried:
a) Initially I thought I'd [burger] the HDD in the transfer, but I replaced it in my old system and booted from it fine.
b) I tried changing the IDE controller, but I had the same problem on both. My DVD drive chain works on both controllers.
c) I tried swapping the jumpers - Master and Cable Select have the same effect.
I can only assume I have something set/not set in the BIOS, but can't for the life of me figure out what. I'm hardly an expert when it comes to internals, and I'm all out of ideas!Quote from: RogerP on 26-December-05, 00:45:28
Excelle.
Download Seagate’s disk install program and make sure you hard drive is totally erased and reformatted. You may have an old MBR (Master Boot Record) on the old disk drive that’s causing the problem.
Roger
Cheers, I'll give that a go. -
hey my iphone was working perfectly and then i sent it to check up and it came back with the itunes icon and data cable on it. so i tried plugging it in the computer and a message on itunes came up saying theres a problem with your phone and it may be damaged and cannot be activated. HELP PLEASE!!
Why on earth send a Worning phone for service sounds like cutting up a Heaththy PET to see how it looks on the inside
-
I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back
Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB -
Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!
Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.
-
Problems with the O2 blackberry data package on my Curve 3G.
I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart -
I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?
I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps! -
Problems with IP Phones registration to CUCME on SG200-50P
Problems with IP Phones registration to CUCME on SG200-50P
System setup:
- Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
with HWIC-4ESW
- Switches:
- old - SLM224P
- new - SG200-50P (SLM2048PT), OS v1.3.2.02
- IP Phones 7911 and 7931, OS v8.4.2
One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
Network diagram:
C2811---HWIC-4ESW---SWITCH---IPPhones
Problem description:
1. In the old setup with SLM224P everything works fine.
Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
2. When switch is changed to new SG200-50G:
- ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
- ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
- after reconnecting the old SLM224P situation backs to normal
Things that have been checked or tried without success:
- ports speed and duplex auto, correct detection - although not tested with manual settings
- CDP/LLDP on/off
- smartport mode auto and most static settings, also with disabled smartport
- power cycle / reset
- spanning tree and port security settings
- solutions from that post - https://supportforums.cisco.com/thread/2232161
None of the above methods worked.
The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
Please advice.
Thanks in advance.1 - You have created the voice vlan?
Nope, flat network, one ip subnet (10 hosts and 10 phones)
2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
Yep, phones are connected to untagged access ports of the one and only vlan
3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
The switch was pretty much in default out-of-the-box config (beside management parameters).
4 - When rebooting the switch, you did ensure to save the start up to running config?
Yes, running to startup
5 - Have you manually set spanning tree PORT FAST for the phone ports?
No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles. -
I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......
There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck -
I have a problem with my phone n73
i have a problem with my phone n73
my memory work good and i can see it from gallery but when i want to save some thing it save directelly in memory dont give me choise and when i want to sign ring tone for alert or ringtone or massege i dont see any thing i save in memory or phone i see only tones whice come with phone
what can i do plz.you need to go to file manager scroll right to memory card
find the tune you want as ringtone
select options-copy to folder-choose phone memory-choose sounds-choose digital-choose tones-save it here-
it will now apper in the tones selection
you can directly save txts and mms to memory card via message settings
i think if you do this bluetooth files recieved will be saved to memory card as well
pics can be saved to memory card via camera settings and the same for video clips
to save music use pc suite or even better a card reader
hope that helps mate -
I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding thisWow. Lots of help. Thanks apple
-
I'm not sure if this is a problem with my phone or with my email account.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Try this First...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first.. -
For my Iphone 5, I just got it few weeks ago, but I notice the battry can not last long , is it normal or I have problem with my phone??
It does sound like the logic board. It's not uncommon for an iBook with a faulty logic board to work intermittently. You can't count on it, though. It could fail completely at any time.
DT&T Computer Services in Fremont, California has the best deal I've found on logic board replacements. They do free diagnostics, so they would make sure that's what you need, and there is a six-month warranty on the repair.
http://www.dttservice.com/ibookg4.html
I'm always a little sad that people are basing their opinions of Macs on these older iBooks. Yours is the newest iBook in existence, but it's still over five years old — ancient in computer terms. -
My wife has a motorola KRZR K1M Cell Phone. I have iPhone 4S. My phone (4S) receives and display text messages from my wife's phone. However, my phone does nort receive or display pictures sent from my wife's phone. However, my daughter has a 4S phone and she receives pictures sent from my wife's phone. What is the problem with my phone?
Do you have MMS enabled, both on the phone and also within your account? Remember, MMS requires a data connection.
-
Can u plz tell me I hav problem with I phone 4 which I can hear their call but they can't hear my voice
Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support
Maybe you are looking for
-
How to remove a program from mac laptop
how to remove a program from my macbook pro 10.6.8
-
Hi all, Have anyone worked on SAP ISU Settlement Procedures? I would like some basic understanding on: 1.) Create a custom settlement procedure 2.) The use of settlement parameters and settlement steps 3.) The basic requirements that need to be setu
-
What operating system can I upgrade my 2006 MacBook Pro 17" inch to if it has a 2.16Gh Intel dual core and 2G ram?
-
Memo creation with one day difference / Missing fe...
Hi, I have a N70 and the PC Suite is version 7.1.51.0. Whenever I create a memo (calendar) or edit it, the Communication Centre saves it as one day earlier. Well, I just wanted to report this bug. I searched here in forum I've found some people with
-
Bex Web Application Designer 3.5
Hello, I am having trouble publishing a web template using Web Application Designer 3.5. Our BW version is 7.0. The underlying query in the Web App. is still 3.5. After editing it..I did a "save" and "Publish in Role". When I look at the report