Help regarding generation of RMI stubs ..............

Hi all,
i want to generate RMI stubs. But by default, the application server generates as RMI Over iiop stubs. I cant use this stubs for some reason.
So, i want to know that how to generate RMI (JRMP) for an enterprise application using AS 8.1?
Is there any descriptors to specify that?
Thank you in advance,
MDB

Similar Messages

Urgent: please help - Object Hash Code of RMI stubs in a cluster

Hello all,
I'm trying to find out for a week now if members of a cluster can get out of synch
regarding "Object Hash Code" of RMI stubs in the JNDI.
After binding an RMI object to one server (no rmic performed since the object
is in the classpath of both servers and the service is pinned), the JNDI mapping
looked identical on both servers.
However, while one server went down for a few hours, the other server has changed
the "Object Hash Code" to a new one (the binding name stayed constant). When the
server went up again it tried to lookup the object under the same binding, then
found it but failed to execute remote methods on it. An error message says that
the object was garbage collected:
java.rmi.NoSuchObjectException: Unable to dispatch request to Remote object with
id: '347'. The object has been garbage collected. at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:766)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:738) at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:207)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:777) at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:508)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:664) at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
Why isn't the new JNDI mapping replicated to the new booting server? Should I
use specific rmic flags? How can I maintain the JNDI trees identical on all clustered
servers?
I'm using two managed WLS 7.02 servers running on win2000 servers.
Dani

Hi Andy,
Thank you for responding.
The binding code looks like that:
m_ctx = new InitialContext();
int index = getNextAvailableRepositoryJNDIIndex();
m_ctx.bind(
NODE_PREFIX+index,
this
where this is the Remote implementation.
How will I make the object hash code constant or have all views remain constant
when the GC changes its reference?
Dani
Andy Piper <[email protected]> wrote:
"Daniel Gordon" <[email protected]> writes:
I'm trying to find out for a week now if members of a cluster can getout of synch
regarding "Object Hash Code" of RMI stubs in the JNDI.The hash code can probably change since the stub represents an
aggregate view of the cluster. But this may be a red-herring. What
does your code look like that binds the rmi object? It may be that DGC
is biting you.
andy

Best practises regarding generation of the EOImpl and VORowImpl java files

Greetings,
I was wondering what is the best practice/suggested approach regarding generation of the EOImpl and the VORowImpl java files for ADF Business Components.
From the maintenance point of view, it makes sense to generate them only if you want to put some custom code in those e.g. validation or transient attribute.
However from performance point of view, does it help to have these EOImpl and the VORowImpl java files generated.
Any thoughts on this will be a lot helpful.
regards - rutwik

Hi
Sections:
* 5.11.3.3 Attribute Indexes and InvokeAccessor Generated Code
* 6.9.4.4 Attribute Indexes and InvokeAccessor Generated Code
Explain the details of the generated code for view object row classes and entity object row classes, respectively.
As described in the guide, the key benefit of the generated code is not performance, but of type-safe access and having a place to put custom code when needed.
When you don't have a generated row class, then there is no typesafe method like getSal() to get the Sal attribute.
Section 4.4.9 Generic Versus Strongly-Typed APIs gives a few more details on that and both 5.11.1.1 Generating Bind Variable Accessors and 5.11.1.2 Generating View Row Attribute Accessors give some concrete examples of the value proposition of the strongly-typed API's.
Without the typed API's of course, you need to get an attribute value by calling:
yourRow.getAttribute("SomeAttrName");
or
yourRow.getAttribute(3); // integer attribute index (zero-based) [see section 5.11.3.3 in the guide]
Since it's rare that someone will like to use the numerical approach, then let's assume that people would go with the generic getAttribute("SomeAttrName") way.
Internally, the framework will need to find the attribute index based on the attribute name before accessing the attribute. If you perform this attribute-name-to-attribute-index lookup a zillion times, then of course it would end up representing some overhead that you could avoid by either using the numerical index yourself, or generating the strongly-typed class. The generated code avoids the need to lookup the attribute by string name and also provides the compile-time checking (i.e. typesafe access) in your code.
So, the performance of using the attribute index access (or the generated code) that is ever-so-slightly faster than using the attribute access by string name, not necessarily the generation of code itself that makes things faster. The performance shouldn't be the basis of the strategy decision, but if they see the value of typesafe access then it might be worth the extra files -- some perhaps containing no custom code -- being generated for them.
Hope this helps
rgds
susan

How to use RMI Stub class in programming?

Hi all,
I'm new on RMI.
Is there anyone can explain to me how to use RMI Stub class which is generated by invoking rmic command?
For my testing, I can only invoke rmi object nethod via its remote interface. Then what is stub used for when we are coding?
I do appreciate anyone's help.
Thanks very much,
Xianyi.Ye

When the remote object binds itself to the registry, what is actually bound is the stub.
So when the client does a registry lookup, what it gets is the stub. However from the client's point of view it is just some mystery object that implements the remote interface.
So you never have to use it directly, it is all automatic.

Help regarding ABAP proxy

Hi ,
please provide documentation or links regarding generation and Configuration of ABAP Proxies.
Ravi Raika

Hi,
Check the following links:
<a href="/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies Approach for coding ABAP Proxies</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81">EDM EMM Scenario Part I: Service Enabling - How to Implement eSOA-Compliant Services</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78">ABAP Proxy Generation</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm">SAP Help - ABAP Proxy Generation</a>
Thanks,
Dipankar

Help regarding Inventory related concurrent managers to be assigned

Hi,
I am looking for a help regarding the below aspects
1)Which concurrent managers needs to be assigned to run the following five concurrent programs.
INV Transaction Worke
Inventory transaction worker
Interface Trip Stop
Min Max report planning
Pick selection List Generation
2)We are facing issues with the above jobs. Currently except Inventory transaction worker all the other concurrent programs are running under standard manager.
because of which Min max planning report programs are piling up under standard manager. Min max programs were going to “Pending” status and never getting picked up as they were waiting for other programs in the queue to get finished. There were thousands piled up after the environment was bring up.
How can we solve this issue.. please suggest

835129 wrote:
The metalink notes you provided didnt gave me any information about the concurrent managers under which these programs should run. Any help regarding concurrent managers would be helpfulI believe you have not read my reply properly since I mentioned "WIP Move Manager and Inventory Manager". Plus, the docs mention it clearly so please read it again!
Thanks,
Hussein

Need help regarding Cycle counting

Hi All,
I need your help regarding cycle counting process in SAP PI. The scenario is as follows,
At present in the legacy system business practice is to count certain number of materials say 100 materials every day. Out of these 100 materials; we keep fixed percentage for the materials to be counted i.e. out of 100 certain percentage will of A material, certain percentage will of B materials like wise.
Also every day we want to generate a list of these 100 materials to be counted (this list can be handed over to inventory person to physically count the material) and generation of PI documents to subsequently post the count results.
Please note that we will be manually assigning cycle count indicator (A or B or C etc) in the material master.
Thanks,
Attarde

from OSS Note 518418 - FAQ: Cycle Counting
3. Question:
I do not understand the determination of the date of physical inventory in the cycle counting physical inventory. How is the planned date or the date of physical inventory determined in the SAP system?
Answer:
In principle, the program calculates the planned date of physical inventory according to the following formula:
   planned date = base date + Interval (Trans.OMCO/Tab.XT159C-ININV)
Usually, the base date is the 'date of the last physical inventory'. Depending on the type of the stock or the batch management requirement, this date is read from one of the following table fields:
MARD-DLINL (Normal materials)
   MCHB-CHDLL (Batch materials, separately valuated materials)
If no physical inventory has been carried out yet and if this date field is therefore empty, the system uses the creation date of the material as basis date. The basis date then comes from one of the following table fields:
MSTA-ERSDA (Normal materials)
   MCHB-ERSDA (Batch materials, separately valuated materials)
Since the cycle counting physical inventory always runs for the current fiscal year, the earliest possible physical inventory date is the 01.01. and the latest possible physical inventory date is the 31.12 of the current year.
If the date of the physical inventory is a non-working day, the program automatically proposes the next possible workday.

Making calls to RMI stubs in VB(A)...

Hi everyone,
I have a requirement to make calls to RMI classes from VBA in Microsoft Excel. I thought that I had found the solution when I came across the Microsoft SDK for Java (version 4.0, being the latest). I got code samples and it all seemed fairly easy.
However, I have just discovered that when I go to the Microsoft page to download the SDK, it has been discontinued.
So, what are my alternatives? I am willing to buy technology to achieve my goals, so third-party solutions that cost are fine.
Basically, I guess my question is this: "How do I make calls to RMI stubs within VBA in Microsoft Excel?"
Any help would be greatly appreciated.
Thanks!
Ben

I remember reading about a JavaBean - ActiveX bridge:
http://java.sun.com/products/javabeans/software/
haven't used it, but it would seem to be the best bet. You'd have to have the Java plugin installed on the target workstation, and write some Java bridging code, but it shouldn't be too tough once you get the ActiveX -> Java Bean stuff working.
Worst case, you could create a DLL that makes JNI calls to call your RMI stubs. Depending on the complexity of the stub calls you need to make, this might not be that bad of a solution.
- K

RMI, stubs and skeleton and EJB

HI,
IN RMI we copy stub on client machine and skeleton on Server machine.
EJBs are said to be extension of RMI.
In EJB when we deploy EJB on the app Server server generates stubs and skeleton.
But on the client machine we don't copy any stub.
So from where these stubs (home stub and remote stub ) comes on client machine because we only depoly the EJB at server and then use that from client
Can anybody explain this ?
Thanks,
Ankur Mittal

Hi,
A number of these answers are correct. The thing to keep in mind is that the entire issue of RMI stubs and the mechanism by which those stubs are made available to the runtime code(whether that code is running in a J2EE server or a client) is vendor-specific. One important thing to note is that these generated artifacts are not present in a portable J2EE archive (.ear, ejb-jar, .war, etc.)
If needed, they are generated at some point by the J2EE implementation. Some vendors expose tools that generate these artifacts. The original J2EE 1.4 SDK beta release had such a tool called j2eec.
Alternatively, many vendors generate them as part of the deployment stage itself. In that case, it's typical for the deployment process to produce some output file that contains the generated artifacts. This is the approach used in the current J2EE 1.4 SDK. The output file is usually referred to as a client.jar. The stubs are automatically available to any code running within the server, but client applications that need them must somehow make the client.jar available to the client JVM. For Application Clients, this is done by specifying the client.jar as one of the input arguments to the runclient command. For stand-alone clients, the client.jar is simply added to the user-classpath when starting the JVM.
Some vendors also support automatic stub-downloading. This has the advantage that the stubs don't have to be available to the client classpath when the client starts. The downside is that using automatic stub downloading requires that a security manager be installed in the client JVM. That typically isn't an issue for the Application Client container, but many stand-alone clients are not coded to instantiate a security manager.
Yet another approach is to dynamically generate the stubs within the client code itself. This is one of the best options since it completely removes the notion of stubs from the developer's view. It's too bad this wasn't done from the beginning, since stub configuration is one of the most common errors encountered by EJB developers. In addition, the static generation of such artifacts is often a deployment-time bottleneck. Finally, note that the EJB Remote view is only one of many J2EE technologies that potentially require such generated artifacts. E.g., web services implementations typically rely on some of the same mechanisms to marshall and unmarshall requests.
--ken
Kenneth Saks
J2EE SDK Engineering
SUN Microsystems

RMI stub compiler

Any plan to add support for automatic rmi stub generation in Jdev ?
Thanks. Ale.

Any comments from the JDev team?

Need help regarding Java decoding of IMAP attachment (IOStream related ques

Hi ,
I need some help regarding the processing of an IMAP attachment , It is a basic IOStream related question I guess.
I have some attachment to a mail , I try to fetch it using javamail and read the content and write it to a file , I was able to do it successfully when I was using stream.read( tempBuffer) function but when I started using stream.read( tempBuffer, 0, m_maxDataSize ); it is giving me following exception
java.io.IOException: Error in encoded stream: needed at least 2 valid base64 characters, but only got 1 before padding character (=), the 10 most recent characters were: "/59PT/eXQ="
     at com.sun.mail.util.BASE64DecoderStream.decode(BASE64DecoderStream.java:259)
     at com.sun.mail.util.BASE64DecoderStream.read(BASE64DecoderStream.java:148)
***Here is the snippet of code that is running this:***
m_contentObj = m_message.getContent();
if(m_contentObj instanceof InputStream)
     System.out.println(" Content is type of InputStream");
     InputStream stream = (InputStream) m_contentObj;
     byte[] tempBuffer = new byte[m_maxDataSize];
     stream.skip( m_currPos );
     int bytesRead=stream.read( tempBuffer, 0, m_maxDataSize );
     System.out.println(" Read the following no of bytes from the Object::"+bytesRead);
     m_currPos+=     bytesRead;
Please suggest what to do.
Thanks & Regards
Saurabh

BUMP, just incase its been missed by a new board member

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

My iPad mini was working very fine from last 9 months....but suddenly today I found it discharging from 100% to 34% though I didn't use it at all...and also found my mini is slightly heated up at the bottom..any help regarding this would be greatful

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

Help regarding :Video Segmentation & Summerization

hello friends,
I am doing my project on above topic and I am trying it with Java.
Is it possible doing it in Java.
What Techniques I'm using are:
1.Java(JMF)
2.Oracle 9i(Inter-Media)
3.Matlab
This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)
Is It possible in Java? How?
Seeking for help regarding this .
Thank you.

This project concludes of four parts
1.Segmentation (Video to Image conversion)
2.Comparison (Copare frame using algo.)
3.Extraction (remove duplicate frames based on algo)
4 Summarization (Collect frames and form a new content based video)So, compressing that into a simple question instead of a convoluted one... you just want to remove duplicate frames from a video and save it to file?

Help Regarding Xi integrating with Seibel System.

HI @,
I have to intergrate a seible system with R/3 but I haven't worked on the same before.
I need help regarding seibel inetrgartion scenarions and various adapters that can be used in that conditions.
Documents on Seible Integration will b really helpful.
Regards

It would be better to go for the iway adapter for this integration requirement. The other documents can be obtained direclty from iway
Regards,
Prateek

Help regarding MBeanServerConnection queryName function

Hi guys, i recently start using JMX and i need some help regarding queryName function. I want to get a specific set of objectNames, not all of them.
I have the following List of Beans
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=14b69d-eee40f3d6467,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=40-a0b2-f1dfb314406f,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=98-4af4-9147-bf45fb49c044,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers,serverId=c-4bf6-9c42-d5c3acea6662,name=LoadBalancerServer
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,name=LoadBalancerListener
ObjectName = WowzaMediaServerPro:loadBalancer=LoadBalancer,name=LoadBalancerRedirector
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=IOPerformance
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=MediaCache
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=PendingReadAheadRequestTracker
ObjectName = WowzaMediaServerPro:mediaCache=MediaCache,name=PendingWriteRequestTracker
ObjectName = WowzaMediaServerPro:name=Connections
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=Connections
ObjectName = WowzaMediaServerPro:name=HandlerThreadPool
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=HandlerThreadPool
ObjectName = WowzaMediaServerPro:name=IOPerformance
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=IOPerformance
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=IOScheduler
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=chat,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=default,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=file,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=live-record-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-buffer,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-edge-origin,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=liverepeater-origin,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=netconnection,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-buffer-record-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtp-live-record-lowlatency,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=rtpout,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-buffer,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-buffer-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,streamTypes=StreamTypes,streamTypeName=shoutcast-record,name=Properties
ObjectName = WowzaMediaServerPro:vHosts=VHosts,vHostName=_defaultVHost_,name=Properties
ObjectName = WowzaMediaServerPro:name=Server
ObjectName = WowzaMediaServerPro:name=ServerNotifications
My question is that , how can i get those rows that contains "WowzaMediaServerPro:loadBalancer=LoadBalancer,loadBalancerServers=LoadBalancerServers"?
Please help

Hello ,
There should be a number of BRF+ tutorials available in SCN which discuss the FDT APIs. You can have a look at them to get an idea of the various APIs available and their uses.
For your usecase, you should do the following.
        lo_fdt_function         TYPE REF TO if_fdt_function,
        lo_fdt_result           TYPE REF TO if_fdt_result,
* Get function handle
      CALL METHOD lo_fdt_factory->get_function
        EXPORTING
          iv_id       = lv_function_id
        RECEIVING
          ro_function = lo_fdt_function.
where lv_function_id is the GUID of the BRF+ function . You can either make it a constant , or you can use a FDT API to get the function GUID from the BRF+ application name and function name.
*   Set function context
    TRY.
        CALL METHOD lo_fdt_context->set_value
          EXPORTING
            iv_id    =
            ia_value =
This is one way to set the input context ( pass the input to the BRF+ function to process ). There are other ways to do this as well. Which one you use would depend on the kind of input you want to pass.
* Execute BRFPLUS function
TRY.
      CALL METHOD lo_fdt_function->process
        EXPORTING
          io_context = lo_fdt_context
        IMPORTING
          eo_result = lo_fdt_result.
* Get result output
TRY.
      CALL METHOD lo_fdt_result->get_value
        IMPORTING
          ea_value =
Another direct way of doing it would be to use the method PROCESS of the class CL_FDT_FUNCTION_PROCESS.
I have not gone into much explaination here , but it should provide you an idea of how you can go about it.Read the SCN docs on the APIs to get a better idea , or better still if you can get hold of a copy of the BRF+ book by Carsten Ziegler , you will get an end to end explaination of all BRF+ APIs in it.
Regards,
Indranil.

Help regarding generation of RMI stubs ..............

Similar Messages

Maybe you are looking for