Help requested.. silly issue I think?

Merry Christmas!
I hope someone here can help with an issue I am having with a new iPod Nano 4th gen. I plugged in this 4th gen to my son's itunes (he had a 3rd gen Nano) earlier this morning. I saw itunes recognoze the ipod and it started bringing up the introduction/registration page in the itunes window. However, I didnt let that page fully load and instead went to "Store" menu and hit "View My Account" to make sure that I was on the right itunes account as I manage 3 itunes account from this computer.
Now I cant seem to get itunes to rereognize the new ipod. I cant get back to that initial registration page to synch it to the account. How do I get itunes to even notice I have that ipod plugged in? I have gone to "Manage" in "Computer" and stopped and restarted itunes. I cant seem to get into "disk" mode, but I dont know if that is even needed.
Thanks for any advice!

All answers are in the code. Lets see yours.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"justdan1" <[email protected]> wrote in
message
news:g00hj4$r9v$[email protected]..
> Hello,
>
> I'd like to thank you all for your assistance in
advance. Well, I'm
> probably
> in over my head
> with this software as I usually am dealing with
computers. So here is my
> problem:
>
> For some reason, when I design on dreamweaver, I no
longer am able to see
> any
> of the changes
> I made, in the "design window." Formatting, fonts,
colors, all remain
> unchanged on DW. Although
> when I preview the page in a browser all the changes are
fine. I'm hoping
> it's just a "settings issue"
> or preference issue. I don't know? I hope this posting
is coherent, if
> you
> have any questions please
> ask, btw. I'm using Windows if this matters.
>
> thank you kindly,
>
> Justdan1
>

Similar Messages

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....

Request for issuing

dear all,
i have a question when a department needs some items, and these items do exist in our stock (so it is not a PR)....is there a way to do this via the system (the request for issuing like reservation or something) .. also is it possible to to the department (would be a cost center) if it belongs to a different plant other than the warehouse. thank you

for first part - if stock needed is already available then logically a production order should exist against which stock will be issued.
for second question - it depends under which plant you need stock for consumption, if it is a different plant then where you have stock then stock needs to be transferred to the plant where it is needed. Further if both plants are under same co code then simple plant to plant stock transfer is sufficient.
as suggested above we would surely like to know more details about your situation to help you.
Yogesh

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

If not successful:
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try another USB port and cable
Try another computer to help determine if you have an iPod or computer problem

Since updating to FF 8 I can no longer use Multirow book marks, can anyone help with this issue?

Since updating to FF 8 I can no longer use Multi-row book marks, can anyone help with this issue? the one I used is here http://multirowbookmarkstoolbar.com/

Try the support site:
*http://multirowbookmarkstoolbar.com/forum
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/

Re: Firefox no longer works with Mac OS X 10.5, will upgrading to Lion, OS X 10.7, help with this issue?

I cannot upgrade my Mac to Mountain Lion, OS X 10.8 and cannot buy a new Mac so will upgrading from
OS X 10.5 to OS X 10.7 help with this issue?

If you are going tob e upgrading to 10.7 you should be able to just upgrade, and then install future updates of Firefox with no problem.

Since having installed Yosemite my adobe acrobat X crashs as soon as I want to open a file, can anyone help on this issue?

Since having installed Yosemite my adobe acrobat X crashs as soon as I want to open a file, can anyone help on this issue?

Please try the steps below and let me know if it worked for you
Delete all the files from following folders:
[Home]/Library/Application Support/Adobe/SLStore
[Home]/Library/Application Support/Adobe/SLCache
And, delete all files from following folder except cache.db
[Home]/Library/Application Support/Adobe/AdobePCD
Then launch Acrobat and try to activate and check.
Regards,
Rave

Can anyone help with this issue.... intermittent sound from apple tv

Can anyone help with this issue?..watched the trailer of a movie with sound, then downloaded and went to watch it, but no sound and this message was displayed:"an incompatible audio signal has ben received.check the output device" tv is a sharp aquos

I don't know if this will help but have you tried switching the audio output to 16-bit? On the AppleTV, click Settings, Audio & Video, Audio Output. The two choices are "auto" and "16-bit". Good luck!

HT5316 I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. I'm not installing Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now?

Hi all,
I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. In an attempt to solve crash issue, I've installed Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
thanks,
korriefromca

Hi
korriefromca wrote:
My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
You would only save about 500MB by deleting MS 2.1.3. You may find it useful to keep the application, or perhaps to make a zip and then delete the original
CCT

AT selection-screen on ON HELP-REQUEST

Hi
What is normally done in the Selection Screen event :
AT selection-screen on ON HELP-REQUEST.
Normally pressing F1 helps gives Documentation present in Data Element assoicated with the field. Exactly in what cases would we be needing to use this event.

Hi,
That event is used for search.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
       exporting
            field_name = 'p_file'
       importing
            file_name = p_file.
If you code in the same manner in the selection screen you will able to search and select a file from your work station, so that it will be uploaded in SAP.
I hope this will help you, if not plzzz be back.
CHEERS
If your problem is solved award points and close the thread.

PROCESS ON HELP-REQUEST

Hi
wat is importance of POH. what If there is no PROCESS ON HELP-REQUEST ?
Thanks and regards
- Puneet Sharma.

To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.

10.1.3.3.0 Request invoke issue

Hi,
Currently I have 10.1.3.3.0 Linux redhat application server. When I deploy following jsp and invoking from browser http://myname/testJSP, after 5 minutes I can see
System.out.println("*****Start**** " ); message again.
for example in log file
System.out.println("*****Start**** " );
System.out.println("*****Start**** " );(After 5 minute it logs this)
Any one come accross this?
Need help resolving this issue.
Regards,
Jigar
<%
System.out.println("*****Start**** " );
Long timeinmill = System.currentTimeMillis();
Thread.sleep(400000);
System.out.println("*****End**** " );
%>
<html>
<head>
</head>
<body>
<table class="search" style="{width= 50%}" >
<caption>WELCOME TO Sample Application</caption>
</table>
</body>
</html>

Does any one come accross this? I will appreciate any clue or help resolving this issue.
Regards,
Jigar

Help requested.. silly issue I think?

Similar Messages

Maybe you are looking for