Request for issuing

dear all,
i have a question when a department needs some items, and these items do exist in our stock (so it is not a PR)....is there a way to do this via the system (the request for issuing like reservation or something) .. also is it possible to to the department (would be a cost center) if it belongs to a different plant other than the warehouse. thank you

for first part - if stock needed is already available then logically a production order should exist against which stock will be issued.
for second question - it depends under which plant you need stock for consumption, if it is a different plant then where you have stock then stock needs to be transferred to the plant where it is needed. Further if both plants are under same co code then simple plant to plant stock transfer is sufficient.
as suggested above we would surely like to know more details about your situation to help you.
Yogesh

Similar Messages

HT1386 we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

Each phone needs to set its own sync settings on the various tabs in iTunes. On the Apps tab, for example, uncheck the apps that you don't want on the phone being synced. This article may also be of interest: http://gigaom.com/apple/itunes-101-multiple-devices-one-itunes-account/.
You can change the Apple ID used for purchasing on her phone by going to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using her Apple ID. However, be aware that if she has any apps on her phone purchased with your Apple ID she will still be prompted to enter the password associated with this ID for all future updates of these apps. This is because apps are permanently tied to the Apple ID used to purchase them, regardless of the ID in Settings>Store.

I need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user

Sorry.
The iPhone is of no use until/unless the previous owner removes it from their account.
You will need to find the prior owner or return the iPhone.

Firefox has detected that the server is redirecting the request for this address in a way that will never complete. *This problem can sometimes be caused by disabling or refusing to accept cookies. I followed the instructions for "redirection" issues.

Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
* This problem can sometimes be caused by disabling or refusing to accept
cookies.

In my experience this is most of the times a server issue of the website provider.
Does this error occur on all Websites or just one specific Website?
Does this Website load in Internet Explorer (or any other Browser?)?

Error while raising modify request for AD resource

Hi,
Getting below error in log, while raising modify request for AD resource, UI shows error while retrieving resource entity details.
<Oct 19, 2011 2:15:45 AM CDT> <Error> <oracle.iam.requesttemplate.agentry.operations> <BEA-000000> <The "itresource-type" property is missing for attribute reference AD Remote Manager ITResource, which is of type itresource-lookup.>
I verified the datasets for AD Remote Manager ITResource, comparing with our other environments. It is proper and we are not using AD Remote Manager ITResource anywhere.
<AttributeReference name="AD Remote Manager ITResource" attr-ref="AD Remote Manager ITResource" type="Long" length="10" widget="itresource-lookup" required="false" available-in-bulk="true"/>
Please let me know how to resolve this issue.
Thanks in Advance.
Edited by: 856226 on Oct 19, 2011 4:55 AM

Hi,
I think you should post this in an other forum, somewher in the Fusion stack, maybe Identy Management. This forums is ment for the Oracle database. So please post in a forum underneath https://forums.oracle.com/forums/category.jspa?categoryID=13&start=0
Herald ten Dam
http://htendam.wordpress.com

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

How can I get iTunes to answer my requests for help?

I have tried for a few days now to get iTunes to help me get some tunes that partially downloaded. Their initial response seemed to work but the next day the tunes were only partially on my PC. I re-installed the software, called the phone number on my PayPal receipt, sent another e-mail request for help, responded to their follow up e-mail a few days ago asking if my issue was resolved.........and STILL cannot get them to help me resolve. They say I should receive a response within 24 hours, and it has been longer. No phone number to call, the initial instructions to re-download the missing tunes were confusing

It is quite easy to find out how to redownload purchases, using the search bar ( by Support) at the top of this page:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can contact itunes support again by clicking Support at the top of the page, then clicking the link under Contact Us.

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

Error while creating Credit Memo Request for Milestone billing invoice

Hi All,
I have a scenario where i have Milestone billing(% based) at header level in Contracts. I create Invoice for that and then try to create Credit Memo Request with reference to the Invoice.
Problem comes when we try to change the qty in the credit memo request. we are able to change the qty but the value is not changing. It remains the same constant value of that milestone.
In my copy control from Invoice to Credit memo request for the item category i have maintained the pricing type as "C" because i want to copy and manual conditions.
So kindly let me know which config setting should be done so that whenever i change the qty the value should also be changed.
Please Note : This is happening only when my billing plan is at header level. For Billing plan at Item level its working fine.....
Thanks.....

Hiiii.....
Can anyone please advise on the below issue of mine.....
Thanks alot for the help.......in advance

Error in raising ESS requests for an Approver

Hello Experts,
We have implemented standard claims workflow WS18900023 and have implemented BADI to get next approver.
Everything is working fine except one case when an Approver of certain claim type is raising request for himself. Then we are getting error while saving the claim: Approver can not raise claim.
I checked the documentation of BADI and found that we should return Person No and Group or Group in case we have multiple approvers but if we return null Group or null person no and group badi will go into error.
Can you please help me with a possible solution to this issue? How can I enable the approver to raise claim for himself??
Best Regards,
Deepak

in that BADI method GET_NEXT_APPROVER.
Make sure your passing the values for export parameters EFD_APGRP and EFD_APERN based on no.of approval levels.
For EFD_APGRP, you can pass value 'ADMIN' as default.
When it's final level don't pass any values to these parameters.

Getting error while raising modify request for AD resource in OIM11g

Hi,
Getting below error in log, while raising modify request for AD resource, UI shows error while retrieving resource entity details.
<Oct 19, 2011 2:15:45 AM CDT> <Error> <oracle.iam.requesttemplate.agentry.operations> <BEA-000000> <The "itresource-type" property is missing for attribute reference AD Remote Manager ITResource, which is of type itresource-lookup.>
I verified the datasets for AD Remote Manager ITResource, comparing with our other environments. It is proper and we are not using AD Remote Manager ITResource anywhere.
<AttributeReference name="AD Remote Manager ITResource" attr-ref="AD Remote Manager ITResource" type="Long" length="10" widget="itresource-lookup" required="false" available-in-bulk="true"/>
Please let me know how to resolve this issue.
Thanks in Advance

Hi,
I think you should post this in an other forum, somewher in the Fusion stack, maybe Identy Management. This forums is ment for the Oracle database. So please post in a forum underneath https://forums.oracle.com/forums/category.jspa?categoryID=13&start=0
Herald ten Dam
http://htendam.wordpress.com

Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

SharePoint 2010 -
I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
Export works fine. But during Import, I get the following errors
[ListItem] [Admin] Progress: Importing
[ListItem] [Admin]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Hol plans.xls] Progress: Importing
[ListItem] [Hol plans.xls]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Time.doc] Progress: Importing
[ListItem] [Time.doc]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [AP Docs] Progress: Importing
[ListItem] [AP Docs]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf] Progress: Importing
[ListItem] [Update - June 27th.pdf]   Verbose: List URL: /pwa1/GTR/7 GTR Programme
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
[ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Progress: Import did not complete.
1. Does the console application treated as a Sandbox Solution?
2. Do I need to configure CAS policy in wss_usercode.config? and what?
3. What else could be configured to make this work?
I have tried adding the following in wss_custom_minimaltrust.config but no avail.
<SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
and
<PermissionSet
                    class="NamedPermissionSet"
                    version="1"
                    Name="SPRestricted">
<IPermission
                      class="SqlClientPermission"
                      version="1"
                      Unrestricted="true"
                            />

</PermissionSet>
UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
Regards, Amit Gupta

Hi,
According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
Simple solution is to change the trust the trust level to FULL: <trust   level="[Full]"    originUrl="URL" />
In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
For more information, you can refer to:
http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Credit Memo Request for intercompany sales process

Hi Experts
I try to find SAP notes regardsing the credit memo request for intercompany related issue but I can
not find any nates. The customer return the goods with 2 different
scenario :-
-Return with credit
-Return with replacement.
Can anybody explain how this 2 scenario perform in the SAP
intercompany sales process. Appreciate for your help. Thanks in advance.
Regards,
Jennie Tan

Already answered
Enter IG (internal credit memo) as the billing type for intercompany
billing for order type RE.
Cust-Sales/distrib-Transactions-Billing-Intercompany billing-Order types
Intercompany billing always refers to a delivery
Processing flow will be:
1. Create returns request invoice receipt (with or w/out reference)
2. Create returns delivery and goods receipt
3. Create credit memo invoice receipt for customer for 1.
4. Create internal credit memo for 2.
Therefore you must make the following entries in the document flow
for billing documents:
Target BillType        DlvType              ItemCat
a)    IG                  LR
b)    IG                  LR                    REN
Parameters for entries:
For a) Copying requirement: 14 Dlv.-rel.header IV
      Copy item no.: x (Check and decide yourself)
For b)Copying requirement: 15 Dlv.rel. item IV
      Data VBRK/VBRP      : 1 Inv.split (sample)
      Billing quantity    : B
      Qty/itm val.pos/neg : +
      Pricing type        : G
Also, refer following SAP Notes
13160 - Returns with intercompany billing
24756 - Credit memo requests with inter-company billing
652007 - Reporting internal credit memos on arrival side
11980 - Intercompany billing with order-related billing document
164074 - Problems for internal invoices on returns
Thanks & Regards
JP

Creation of Trasport request for the Deletion of Infoset from Dev

Hi
i want to create a trasport request for the deletion of infosets from dev system and want to trasport request in to production.
i wish to know while right clicking the info set and selecting deletion will it prompt for trasport request.
could any one help me out for this issue.
Thanks
Sandy

Hi
I suggest you to transport the Infoarea under which the Infoset query is deleted
This will adjust all your changes including any deletion or any new changes
Assign points if useful
Thanks
N Ganesh

IBase When Creating a Request for Change in Solution Manager 7.1

Hello all,
We recenlty upgraded our sandbox system to Solution Manager 7.1 SP3 and are currently investigating the new ChaRM functionality with the new CRM UI. Our company had configured ChaRM back in 2007 and has been working very well since the initial delivery.
While I was following the Request for [Change process simulation from RKT|https://websmp208.sap-ag.de/~sapidb/011000358700000478022011E/index.htm] on our sandbox system, I had noticed that the iBase and Component that we have created in transaction IB52 prior to the upgrade were not showing in our search when we were defining the Change Request Scope section. In the documentation that I have read leading up to the upgrade, there have been no mention of the iBase/Component data becoming invalid post-upgrade nor have I found a conversion process. I have done a search here on SDN and on SAP Notes to see why the iBase and Components were not showing up.
Has anybody encountered this issue since the upgrade to 7.1 or is there something I need to do in IB52 in order for the iBase/Component in the new CRM GUI?
Your assistance in this matter would be greatly appreciated.

Hi,
yes in 7.0 it worked for me too, that is because in 7.0 ChaRM searched for projects based on the IBase you selected.
If there were more than one project where this system is involved you got a pop up where to chose your project.
In 7.1 you chose the project directly, instead of let the system search for you.
And depending on what productive-systems are in this project you get your Ibase list.
If you don't select a project at all you will still get a list of all Ibases in your system.
Iif you ask the SAP, they will allways tell you that you have to have a productive system in your project, at least as you pointed out with a virtual system.
I did not read i t though and therfore ca nnot provide any sources.
This is all based on my experiences.
Best Regards
Daniel
Edited by: Daniel Titze on Nov 23, 2011 6:16 PM

Request for issuing

Similar Messages

Maybe you are looking for