Help - Spry Menu Not Working Properly in Windows
http://signinterpreter.com/new/index.html
It works fine on my mac in all browsers, but causes issues on IE and Chrome/IE. Any clues?
Thank you!!!!
Please specify the MAJOR issues in IE7
Gramps
PS Please rectify this one validation problem to get the full health certificate http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fsigninterpreter.com%2Fnew%2Findex .html
Similar Messages
-
Dreamweaver Spry Menu Not Working Properly
Hello,
I'm putting a horizontal spry menu bar into a table cell (I haven't had the time to learn how to use divs yet and tables have been working fine for me). I have 6 items in the menu with 2 or3 drop down menus for each one. When I view it in live view, when I roll over the menu items, the whole bar drops down to the left side and becomes vertical. Why is this happening? It is shorter than the table cell so that shouldn't be the problem. Thank you for your help.Okay, this is crude, but it's as far as I got. Only some of the buttons cause the menu to move down. Please keep in mind that I am a designer, not a programmer. I'm learning, but am very weak when it comes to coding knowledge. Thanks.
http://littlechisel.com/Ideal_Window/ -
Flash player does not work properly on Windows 7 32 bits
Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your helpHi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju' -
Gadgets not working properly in windows 7
For some reason the gadgets in windows 7 are not working properly. I can open the gadget gallery and select a gadget, but it doesn't show the entire thing. For example i select the clock, and all it shows is a black square with the red ticking hand frozen. Another example is the CPU meter. All it shows when i click on it is a little white square where the meter should be. I can still close the gadgets by way of the close button on each gadget though (the calendar doesn't appear at all). UAC is turned on and i have rebooted the pc, same thing still happening. (It is Enterprise edition if that makes any difference). If anyone could help that would be great!
Have you come across the problem where some of the Gadgets that you added to the Sidebar/Desktop are not displayed correctly? For example, the clock gadget may be displayed as a black square containing only the "seconds" hand. Other gadgets may show up as
white rectangles with an information (i) icon and a plus sign. The settings button next to the gadget does not work, but the
x to close does. Here are some screenshots:
The above-mentioned behavior is caused due to the following reasons:
A subkey with foreign/ASCII character exists under the "Zones" registry key.
XML registration is missing in the system.
Use these steps to fix the problem:
Fix for Case 1
1. Click Start, type Regedit.exe and press {ENTER}
2. Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings \ Zones
3. Under the Zones key, delete the subkey shown with an ASCII character:
4. Exit the Registry Editor.
5. Logoff and login back to your user account.
Fix for Case 2
1. Open an
elevated Command Prompt window. To open an elevated (admin) Command Prompt, click Start, click All Programs, click Accessories,
right-click Command Prompt, and then click Run as administrator.
2. In the Command Prompt window, type the following command and press ENTER:
regsvr32 msxml3.dll
3. Similarly, run these commands:
regsvr32 scrrun.dll
regsvr32 jscript.dll
You should see the DllRegisterServer in <filename> succeeded message for each command executed.
4. Logoff and login back to your user account and see if the Gadgets display correctly. -
Hey, I'm still pretty new to webdesign and this is my first time using the sprymenu on Adobe Dreamweaver CS5.5. I'm using a vertical spry menu and it seems to work fine in Chrome and Firefox but everytime I use it in IE9, I'm prompted first about ActiveX and one of two things happen if I allow "blocked content" or don't allow. When allowing blocked content, my vertical spry menu turns all white and you can not see any of the under images. If you roll over it, the rollover images with text do however show up. As well as the submenus seem to do the same and actually work to some extent. When not allowing blocked content, rollovers and under images display perfectly fine but the submenus no longer show to the right of the parent menus. They don't show at all in general after that. I have been messing around with the css for the spry menu trying to figure out some fix but haven't come across anything similar to my problem after searching hours on end. Any help would appreciated. Below is the code for the vertical spry menu. Thanks!
@charset "UTF-8";
/* SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box with no margin or padding */
ul.MenuBarVertical
margin: 0;
padding: 0;
list-style-type: none;
font-size: 16px;
cursor: default;
width: 200px;
background-image: url(../Images/mnunder.png);
height: 50px;
font-family: "MS Serif", "New York", serif;
font-style: normal;
line-height: 10px;
color: #FFF;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 200px;
height: 50px;
background-image: url(../Images/mnunder.png);
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
margin: -5% 0 0 95%;
padding: 0;
list-style-type: none;
font-size: 100%;
position: absolute;
z-index: 1020;
cursor: default;
width: 200px;
left: -1000em;
top: 0;
background-image:url(../Images/mnover.png)
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarVertical ul.MenuBarSubmenuVisible
left: 0;
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
width: 200px;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
border: 1px solid #333;
color: #FFF;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
border: 1px solid #333;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
display: block;
cursor: pointer;
color: #FFF;
text-decoration: none;
height: auto;
width: 200px;
background-image: url(../Images/mnunder.png)
background-repeat: no-repeat;
padding: 0px;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
color: #F00;
height: 50px;
width: 200px;
background-image: url(../Images/mnover.png);
background-repeat: no-repeat;
padding: 0px;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
color: #F00;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarVertical li.MenuBarItemIE
display:inline;
f\loat: left;
background: #FFF;altruistic gramps wrote:
It is up to you, you could remove the counter; personally I would leave it there because once the focus has moved from the text area, the number of (remaining) words will show.
Another solution is to force IE8 standards document mode as in
<head>
<!-- Mimic Internet Explorer 8 -->
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" >
<title>My webpage</title>
</head>
The problem with the above is that the rendering will also follow IE8 mode.
Gramps
Thanks for your help,
I used the meta tag to emulate IE8 and it works as needed. -
Spry Menu not working correctly
Hopefully this is the right part of the forum to post this question, if not, I apologize.
I have created a site in dreamweaver and am using a single Spry Menu Bar. I have read tons of forum postings about Drop down menus not working in IE, however, mine don't work in any browser or in the Live View either. I have a feeling it has something to do with either the div containing the menu bar or the sizing, but I can't tell. Please help.
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size:17px;
font-family:Tahoma, Geneva, sans-serif;
cursor: default;
width: 100%;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size:100%;
position: relative;
text-align: left;
cursor: pointer;
width:6.8em;
height:3.5em;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size:100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #CCC;
padding: 0.7em 0.5em;
color: #333;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #33C;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #33C;
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
float: left;
background: #FFF;
Here is the code for the page
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<script language="javascript" type="text/javascript" src="http://www.onbile.com/websites/41ea989914d81eb7bd2e415141cd40fe"></script>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>GuitarFusion.com - Play. Learn. Make Music</title>
<link href="guitarfusionblogstyle.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<!--[if lt IE 7.]>
<script defer type="text/javascript" src="pngfix.js"></script>
<![endif]-->
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-15280994-2']);
_gaq.push(['_trackPageview']);
(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body onload="MM_preloadImages('images/homeOver.jpg','images/BioOver.jpg','images/LearnOver.jpg ','images/LessonsOver.jpg','images/ContactOver.jpg')">
<div id="wrapper">
<div id="header">
<div id="logo"></div>
<div id="social"><a href="http://www.facebook.com/pages/Guitarfusion/208575872514732"><img src="../images/facebook_32.png" width="32" height="32" alt="Facebook" border="0"/></a><a href="http://www.linkedin.com/in/sammills"><img src="../images/linkedin_32.png" width="32" height="32" alt="Linkedin" border="0" /></a><a href="http://www.myspace.com/lucid77"><img src="../images/myspace_32.png" width="32" height="32" alt="Myspace" border="0" /></a><a href="http://twitter.com/#!/guitarfusion"><img src="../images/twitter_32.png" width="32" height="32" alt="Twitter" border="0"></a><a href="http://www.guitarfusion.com/blog"><img src="../images/wordpress_32.png" width="32" height="32" alt="Wordpress" border="0"/></a><a href="http://www.youtube.com/guitarfusiondotcom"><img src="../images/youtube_32.png" width="32" height="32" alt="Youtube" border="0" /></a></div>
<!-- Old Nav
<div id="nav"><a href="index.php" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Home','','images/homeOver.jpg',1)"><img src="images/home.jpg" alt="Home" name="Home" width="97" height="45" border="0" id="Home" /></a><a href="biography.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Bio','','images/BioOver.jpg',1)"><img src="images/Bio.jpg" alt="Biography" name="Bio" width="97" height="45" border="0" id="Bio" /></a><a href="learn.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Learn','','images/LearnOver.jpg',1)"><img src="images/Learn.jpg" alt="Learn Online" name="Learn" width="97" height="45" border="0" id="Learn" /></a> <a href="lessons.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Lessons','','images/LessonsOver.jpg',1)"><img src="images/Lessons.jpg" alt="Lessons" name="Lessons" width="109" height="45" border="0" id="Lessons" /></a> <a href="contact.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Contact','','images/ContactOver.jpg',1)"><img src="images/Contact.jpg" alt="Contact" name="Contact" width="126" height="45" border="0" id="Contact" /></a></div>
End Old Nav -->
<div id="navdropdown">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="#">Home</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">About Me</a>
<ul>
<li><a href="#" title="A little about myself.">Biography</a></li>
<li><a href="#">Cirriculum Vitae</a></li>
<li><a href="#" title="See me play or teach.">Mp3 & Videos</a></li>
<li><a href="#" title="Where am I am playing?">Performances</a></li>
<li><a href="#" title="Want me to play your event or party?">Booking</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="#">Lessons</a>
<ul>
<li><a href="#" title="What will you learn?">Syllabus</a> </li>
<li><a href="#" title="How much does this cost?">Pricing</a></li>
<li><a href="#" title="Where do lessons take place?">Locations</a></li>
<li><a href="#" title="What books and supplies will you need?"> Books & Supplies</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Learn Online</a>
<ul>
<li><a href="#">Guitar</a></li>
<li><a href="#">Bass</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Contact</a>
<ul>
<li><a href="#">Email </a></li>
<li><a href="#" title="Facebook, Twitter, Etc..">Social Media</a></li>
</ul>
</li>
</ul>
</div>
</div>
<div id="content">
<div id="blog_header"></div>
<div id="sidebar">
<form method=post action="http://poll.pollcode.com/Vp1c"><table border=0 width=150 bgcolor="#ffffff" cellspacing=0 cellpadding=2><tr><td colspan=2><font face="Verdana" size=-1 color="teal"><center><b>Most useful video lesson topics:</b></center></font></td></tr><tr><td width=5><input type=radio name=answer value="1"></td><td><font face="Verdana" size=-1 color="000000">Open Chords</font></td></tr><tr><td width=5><input type=radio name=answer value="2"></td><td><font face="Verdana" size=-1 color="000000">Barre Chords</font></td></tr><tr><td width=5><input type=radio name=answer value="3"></td><td><font face="Verdana" size=-1 color="000000">Scales</font></td></tr><tr><td width=5><input type=radio name=answer value="4"></td><td><font face="Verdana" size=-1 color="000000">Arpeggios</font></td></tr><tr><td width=5><input type=radio name=answer value="5"></td><td><font face="Verdana" size=-1 color="000000">Music Reading</font></td></tr><tr><td width=5><input type=radio name=answer value="6"></td><td><font face="Verdana" size=-1 color="000000">Picking Technique</font></td></tr><tr><td width=5><input type=radio name=answer value="7"></td><td><font face="Verdana" size=-1 color="000000">Strumming Patterns</font></td></tr><tr><td width=5><input type=radio name=answer value="8"></td><td><font face="Verdana" size=-1 color="000000">Tab Reading</font></td></tr><tr><td width=5><input type=radio name=answer value="9"></td><td><font face="Verdana" size=-1 color="000000">Songwriting</font></td></tr><tr><td width=5><input type=radio name=answer value="10"></td><td><font face="Verdana" size=-1 color="000000">Improvisation</font></td></tr><tr><td width=5><input type=radio name=answer value="11"></td><td><font face="Verdana" size=-1 color="000000">Triads</font></td></tr><tr><td colspan=2><center><input type=submit value="Vote"> <input type=submit name=view value="View"></center></td></tr><tr><td bgcolor="white" colspan=2 align=right><font face="Verdana" size=-2 color="black">pollcode.com <a href=http://pollcode.com/><font color="navy">free polls</font></a></font></td></tr></table></form><a href="./studies.html">
<img src="images/studies.jpg" border="0" /></a><br/><br/>
<script src="http://widgets.twimg.com/j/2/widget.js"></script>
<script>
new TWTR.Widget({
version: 2,
type: 'profile',
rpp: 4,
interval: 6000,
width: 'auto',
height: 200,
theme: {
shell: {
background: '#aee5f5',
color: '#4b508f'
tweets: {
background: '#dbdbdb',
color: '#333333',
links: '#336699'
features: {
scrollbar: true,
loop: false,
live: false,
hashtags: true,
timestamp: true,
avatars: false,
behavior: 'all'
}).render().setUser('guitarfusion').start();
</script></font><br/>
<div id="fb-root"></div><script src="http://connect.facebook.net/en_US/all.js#xfbml=1"></script><fb:like-box href="http://www.facebook.com/pages/Guitarfusion/208575872514732" width="200" show_faces="true" border_color="" stream="true" header="true"></fb:like-box>
</div>
<div id="blog">
<?php
/* Short and sweet */
define('WP_USE_THEMES', false);
require('./blog/wp-blog-header.php');
?>
<?php
require('./blog/wp-blog-header.php');
?>
<?php
$posts = get_posts('numberposts=10&order=ASC&orderby=post_title');
foreach ($posts as $post) : start_wp(); ?>
<?php the_date(); echo "<br />"; ?>
<h2><?php the_title(); ?> </h2>
<?php the_content() ?>
<a class="bloglink" href="<?php the_permalink() ?>">
Read more...</a><br />
<?php
endforeach;
?>
</div>
<div id="ad_middle"></div>
<div id="blog_bottom2">
<h1> Free Stuff</h1>
<br/>
<ul>
<li><a href="http://www.metronomeonline" target="_new">Online Metronome</a> - Metronomes are a great tool to use during practice to keep a steady tempo and to help increase speed of passages. Use this online metronome if you do not already have a stand alone metronome.</li><br/>
<li><a href="http://itunes.apple.com/us/app/id347846503">Iphone / Itouch Metronome</a> - This is an example of several free metronome apps that are available for your phone. Android users can also find free metronomes on the Marketplace. Be sure and read the ratings, some are better at keeping time than others.</li><br/>
<li><a href="https://market.android.com/details?id=com.pedrocorp.android.guitar&feature=search_result">Android Phone Metronome / Tuner / Chord Dictionary</a>This handy little app will not only provide you with a tuner, but has a built-in metronome and chord dictionary. - </li><br/>
<li><a href="http://tuxguitar.herac.com.ar/" target="_new">Free Guitar Tab Editor</a> - View / Create Tab - Free alternative to GuitarPro Software. Use this software to open .gp3, .gp4, .gp5 files and search for music online.</li><br/>
<li><a href="http://www.blanksheetmusic.net/">Free Blank Sheet Music</a> - Print blank sheet music. Choose from standard notation, treble, bass, alto clefs, and tablature. </li><br/>
<li><a href="http://www.911tabs.com/">Free Tablature Search Engine</a> - This is a great search engine to find tabs. I mainly use this to find .gp5 files for my Tux Guitar Software. </li>
</ul>
</div>
<div id="blog_bottom"><span style="float:left;">
<img src="images/mapad.jpg" /></span>
<iframe width="425" height="350" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="http://maps.google.com/maps?q=1060+West+State+Road+434,+Longwood,+FL&sll=28.697815,-81.364 128&hl=en&sspn=0.006295,0.006295&ie=UTF8&hq=&hnear=1060+Florida+434,+Longwood,+Florida+327 50&ll=28.70572,-81.364145&spn=0.026349,0.036478&z=14&iwloc=A&output=embed"></iframe><br /><small><a href="http://maps.google.com/maps?q=1060+West+State+Road+434,+Longwood,+FL&sll=28.697815,-81.364 128&hl=en&sspn=0.006295,0.006295&ie=UTF8&hq=&hnear=1060+Florida+434,+Longwood,+Florida+327 50&ll=28.70572,-81.364145&spn=0.026349,0.036478&z=14&iwloc=A&source=embed" style="color:#0000FF;text-align:right">View Larger Map</a></small>
</div>
</div>
<div id="footer">
<ul>
<li><a href="../index.html">Home</a></li>
<li><a href="../biography.html">Biography</a></li>
<li><a href="../learn.html">Learn Guitar</a></li>
<li><a href="../Lessons.html">Guitar Lessons</a></li>
<li><a href="../contact.html">Schedule Lessons</a></li>
<li><a href="mailto:[email protected]">Contact Webmaster</a></li>
</ul>
© 2006-2011 Guitarfusion.com All Rights Reserved. Unauthorized Use Prohibited.
</div>
</div>
</body>
</html>
And here is the code for the index.php's css
body {
background-color: #ff9933;
font-family:Verdana, Geneva, sans-serif;
font-size:11px;
p {
text-align:center;
text-indent:15px;
#wrapper {
width:960px;
height:100%;
margin-left:30px;
position:absolute;
#header {
width:960px;
height:310px;
background-image: url(images/gfheader.gif);
background-position:center;
background-repeat:no-repeat;
position:relative;
z-index:0;
#logo {
height:242px;
width:235px;
background-image:url(images/GuitarFusionLogo.gif);
position:relative;
top:40px;
left:80px;
z-index:1;
visibility:hidden;
#nav {
width:600px;
height:45px;
z-index:2;
position:relative;
top:12px;
left:290px;
visibility:hidden;
#navdropdown {
background-color:#999;
width:600px;
height:45px;
z-index:3;
position:relative;
top:12px;
left:290px;
#content {
width:840px;
height:1800px;
background-color:#fff;
position:relative;
margin-left:60px;
#social {
width:195px;
height:32px;
border:none;
position:relative;
text-align:right;
bottom:25px;
right:65px;
float:right;
z-index:3;
visibility:hidden;
.social {
margin-left:50px;
#blog {
width:600px;
height:500px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
float:left;
z-index:1;
overflow:auto;
background-color:#d6e8f7;
#blog_header {
width:625px;
height:45px;
background-Image:url(images/blogheader.gif);
position:relative;
top:20px;
left:5px;
z-index:2;
float:left;
.nav {
margin-left:20px;
#sidebar {
width:200px;
height:1500px;
border:none;
left:-10px;
top:10px;
position:relative;
float:right;
#ad_middle {
width:600px;
height:200px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
z-index:1;
overflow:auto;
float:left;
background-color:#EFF5E9;
background-image:url(images/lessonsad.jpg);
background-repeat:no-repeat;
background-position:center;
#blog_bottom {
width:600px;
height:370px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
z-index:1;
overflow:auto;
float:left;
background-color:#F6F6F6;
#contentwrapper {
width:650px;
height:500px;
position:relative;
top:50px;
float:left;
margin-left:95px;
#header_content {
width:624px;
height:43px;
background-image:url(images/Header.gif);
text-align:center;
font-size:28px;
font-family:"Palatino Linotype", "Book Antiqua", Palatino, serif;
line-height:40px;
color:#FFF;
position:relative;
left:10px;
#bio_content {
width:600px;
height:1000px;
.biopic {
float:left;}
#learn_content {
width:600px;
height:100%;
#faq {
width:700px;
height:600px;
background-color:#f8f8f8;
border:thin solid #000;
margin-left:60px;
#books {
width:750px;
height:700px;
position:relative;
float:left;
margin-left:35px;
fieldset {
margin: 1em 0;
padding: 1em;
border : 1px solid #ccc;
background: #f8f8f8;
legend {
font-weight: bold;
#form_content {
position:relative;
left:160px;
height:880px;
width:500px;
text-align:center;
background-color:#E7EFFF;
border:double #900;
form div {
background-color:#f8f8f8;
padding:0px;
margin:0px;
#footer {
width:960px;
height:40px;
bottom:0px;
position:relative;
text-align:center;
line-height:1px;
font-size:10px;
padding-bottom:10px;
#footer ul li {
display:inline;
margin:20px;
#footer ul li a {
text-decoration:none;}
#blog_bottom2 {
width:600px;
height:370px;
border: thin solid #000;
position:relative;
top:15px;
left:15px;
z-index:1;
overflow:auto;
float:left;
background-color:#F6F6F6;
text-align:center;
#studies{
width:600px;
height:800px;
position:relative;
margin-left:110px;
text-align:center;
background:#f8f8f8;
#blog_bottom2 ul li
{list-style-type:none
Any help is appreciated.You do not have a constructor for the menu bar as in
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
There are too many mistakes in the JS outside of the Spry Menu Bar. Have a look at the following which includes all errors, not just the JS
Validation Output: 117 Errors
Line 21, Column 38: character "&" is the first character of a delimiter but occurred as data var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 21, Column 40: cannot generate system identifier for general entity "i" … var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=… ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 21, Column 40: general entity "i" not defined and no default entity … var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 41: reference not terminated by REFC delimiter …var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 21, Column 41: reference to entity "i" for which no system identifier could be generated …var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 39: entity was defined here var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=…
Line 21, Column 50: character "&" not allowed in attribute specification list …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
Line 21, Column 50: element "a.length" undefined …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 21, Column 51: character "&" is the first character of a delimiter but occurred as data …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 21, Column 60: character "&" is the first character of a delimiter but occurred as data …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 21, Column 62: cannot generate system identifier for general entity "x.oSrc" …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 21, Column 62: general entity "x.oSrc" not defined and no default entity …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 68: reference to entity "x.oSrc" for which no system identifier could be generated …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 61: entity was defined here …,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
Line 29, Column 76: character ";" not allowed in attribute specification list … var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) ✉
Line 29, Column 76: element "a.length" undefined … var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 41, Column 57: character "&" is the first character of a delimiter but occurred as data …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 41, Column 59: cannot generate system identifier for general entity "parent.frames.length" …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 41, Column 59: general entity "parent.frames.length" not defined and no default entity …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 41, Column 79: reference not terminated by REFC delimiter …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 41, Column 79: reference to entity "parent.frames.length" for which no system identifier could be generated …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 41, Column 58: entity was defined here …var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
Line 45, Column 15: character "&" is the first character of a delimiter but occurred as data if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 45, Column 17: cannot generate system identifier for general entity "d.all" if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 45, Column 17: general entity "d.all" not defined and no default entity if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 45, Column 22: reference not terminated by REFC delimiter if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 45, Column 22: reference to entity "d.all" for which no system identifier could be generated if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 45, Column 16: entity was defined here if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms…
Line 45, Column 47: character "&" is the first character of a delimiter but occurred as data …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 45, Column 50: reference not terminated by REFC delimiter …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 45, Column 50: reference to entity "i" for which no system identifier could be generated …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 39: entity was defined here var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=…
Line 45, Column 65: character ";" not allowed in attribute specification list …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
Line 45, Column 65: element "d.forms.length" undefined …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 47, Column 13: character "&" is the first character of a delimiter but occurred as data for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 47, Column 15: cannot generate system identifier for general entity "d.layers" for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 47, Column 15: general entity "d.layers" not defined and no default entity for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 47, Column 23: reference not terminated by REFC delimiter for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 47, Column 23: reference to entity "d.layers" for which no system identifier could be generated for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 47, Column 14: entity was defined here for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum…
Line 47, Column 23: character "&" is the first character of a delimiter but occurred as data for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 47, Column 26: reference not terminated by REFC delimiter for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 47, Column 26: reference to entity "i" for which no system identifier could be generated for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum… ✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 21, Column 39: entity was defined here var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=…
Line 47, Column 42: character ";" not allowed in attribute specification list …or(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].documen… ✉
Line 47, Column 42: element "d.layers.length" undefined …or(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].documen… ✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 49, Column 9: character "&" is the first character of a delimiter but occurred as data if(!x && d.getElementById) x=d.getElementById(n); return x; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 49, Column 10: character "&" is the first character of a delimiter but occurred as data if(!x && d.getElementById) x=d.getElementById(n); return x; ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 59, Column 76: character "<" is the first character of a delimiter but occurred as data …=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) ✉
This message may appear in several cases:
You tried to include the "<" character in your page: you should escape it as "<"
You used an unescaped ampersand "&": this may be valid in some contexts, but it is recommended to use "&", which is always safe.
Another possibility is that you forgot to close quotes in a previous tag.
Line 65, Column 9: end tag for "d.layers.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 47, Column 26: start tag was here for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].docum…
Line 65, Column 9: end tag for "d.forms.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 45, Column 50: start tag was here …x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
Line 65, Column 9: end tag for "a.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 29, Column 67: start tag was here … var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
Line 65, Column 9: end tag for "a.length" omitted, but OMITTAG NO was specified </script> ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 21, Column 41: start tag was here …var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x…
Line 121, Column 579: end tag for "img" omitted, but OMITTAG NO was specified …ight="32" alt="Twitter" border="0"></a><a href="http://www.guitarfusion.com/bl… ✉
You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 121, Column 492: start tag was here …="http://twitter.com/#!/guitarfusion"><img src="../images/twitter_32.png" widt…
Line 225, Column 14: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified <form method=post action="http://poll.pollcode.com/Vp1c"><table border=0 width=… ✉
Line 225, Column 72: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …poll.pollcode.com/Vp1c"><table border=0 width=150 bgcolor="#ffffff" cellspacin… ✉
Line 225, Column 80: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …lcode.com/Vp1c"><table border=0 width=150 bgcolor="#ffffff" cellspacing=0 cell… ✉
Line 225, Column 114: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …dth=150 bgcolor="#ffffff" cellspacing=0 cellpadding=2><tr><td colspan=2><font … ✉
Line 225, Column 128: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …r="#ffffff" cellspacing=0 cellpadding=2><tr><td colspan=2><font face="Verdana"… ✉
Line 225, Column 146: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …acing=0 cellpadding=2><tr><td colspan=2><font face="Verdana" size=-1 color="te… ✉
Line 225, Column 174: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …d colspan=2><font face="Verdana" size=-1 color="teal"><center><b>Most useful v… ✉
Line 225, Column 197: document type does not allow element "center" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag …"Verdana" size=-1 color="teal"><center><b>Most useful video lesson topics:</b>… ✉
The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 225, Column 277: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …center></font></td></tr><tr><td width=5><input type=radio name=answer value="1… ✉
Line 225, Column 291: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …</td></tr><tr><td width=5><input type=radio name=answer value="1"></td><td><fo… ✉
Line 225, Column 302: an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified …tr><td width=5><input type=radio name=answer value="1"></td><td><font face="Ve… ✉
Line 225, Column 323: end tag for "input" omitted, but OMITTAG NO was specified … type=radio name=answer value="1"></td><td> -
Very frustrated. Just switched over my menu bar to Spry and I have to do my entire site now. I am not a web programmer by trade so please bare with me. My index page has the menu bar working fine. I copied the content of my header, the top photo work and my menubar onto another page and there the menu bar doesn't work. Exact same code as it was copied. Can't figure this out for the life of me.
Everything down to the page content is identical.
Works: http://www.vmfl.ca/index.html
Doesn't work: http://www.vmfl.ca/tournaments.html
Any help would be great.Found my error. Thanks
-
Dreamweaver Spry Menu not working on I pad
Hi
I have built a website and currently have issues with the spry menu bar not working with the ipad i phones etc.
When you press the link the dropdown menu does not appear.
Any help would be greatly appreciated.
The website is www.jkwindowsanddoors.co.uk and the link is the products in the spry menu bar.
Many ThanksThe Spry menu system was created prior to the advance of touch screens. The action that causes the Spry sub-menu to appear is the hover event, an event that does not exist in touch screen technology.
What I am trying to say is that the Spry menu system cannot be used for touch screens. You are better off using pure CSS menus or jQuery menus. -
Spry menu not displaying properly in IE8
Right up front, I'm new to Spry.
I built a flyout menu, nothing fancy just standard.
Works and looks fine in Firefox, Opera, Safari. But IE 8 on a PC the first items are "running together and the "twisty >" is under the text.
Are there any known issues I need to be aware of when using Spry menus in IE?
Thanks for any comments or suggestions.
SteveYes you're right code would help. I took the smallest page and pasted in the code below. I have bolded the spry menu itself. I'm going to create another menu on a new page from scratch and without any og the other pieces of the page and see if it works in IE8
anothe page with the same munu is at:
http://davidwrightlandscape,com/index2.html
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>David H Wright - Landscape Architect</title>
<style type="text/css" media="all">
<!--
@import url("CSSSculptor/1ColumnFixedCenteredHeaderandFooter_TahitiSea_css/screen.css");
-->
</style>
<style type="text/css" media="print">
<!--
@import url("CSSSculptor/1ColumnFixedCenteredHeaderandFooter_TahitiSea_css/print.css");
body {
background-color: #FFF;
-->
</style>
<script type="text/javascript" src="CSSMenuWriter/cssmw/menu.js"></script>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<style type="text/css" media="all">
<!--
@import url("CSSMenuWriter/cssmw/menu.css");
-->
</style>
<!--[if lte IE 6]>
<style type="text/css" media="all">
@import url("CSSMenuWriter/cssmw/menu_ie.css");
</style>
<![endif]-->
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="outerWrapper">
<div id="header">
<p align="center"><img src="images/DaveWright-logo-WEB.jpg" width="345" height="220" alt="Logo" /><img src="images/DSC_0076.jpg" width="416" height="220" alt="Lindsey OverHead - 076" /><br />
</p>
PO Box 100 - Branchville, NJ 07826 - Phone 973-948-2090 - Fax 973-948-2083 </div>
<div></div>
<img src="images/Servicebanner2-small.jpg" alt="" width="961" height="30" border="0" usemap="#Map1">
<map name="Map1" id="Map1">
<area shape="rect" coords="189,4,380,27" href="firm.html" alt="Firm Information">
<area shape="rect" coords="61,2,154,27" href="index.html" alt="Return Home">
<area shape="rect" coords="401,5,532,26" href="portfolio.html" alt="portfolio">
<area shape="rect" coords="553,5,723,26" href="site.html" alt="Site Amenities">
<area shape="rect" coords="754,5,903,27" href="contactus.html" alt="Contact Us">
</map>
<div id="contentWrapper">
<div id="content">
<h1 align="center"><img alt="" name="Image1" width="220" height="100" id="Image1" /><img src="" alt="" width="220" height="100" id="Image2" /><img src="" alt="" width="220" height="100" id="Image3" /><img src="" alt="" width="220" height="100" id="Image4" /></h1>
<h1><br />
Plantings Selection and Examples</h1>
<p> </p>
<p align="center"><img src="" alt="" width="920" height="500" id="Planting_collage" /></p>
</div>
</div>
<div id="footer">
<div><span class="parent"><a href="#"><img src="images/DaveWright-logo-FOOTER.jpg" alt="David Wright Landscaping" width="120" height="61" align="left" id="logo" style="background-color: #009966;" /></a></span>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="index.html">HOME</a> </li>
<li><a href="firm.html" class="MenuBarItemSubmenu">FIRM INFORMATION</a>
<ul>
<li><a href="aboutus.html">About Us</a></li>
<li><a href="services.html" class="MenuBarItemSubmenu">Services</a>
<ul>
<li><a href="design.html">Design</a></li>
<li><a href="installation.html">Installation</a></li>
<li><a href="gardeningservices.html">Gardening Services</a></li>
<li><a href="siteplanning.html">Site Planning</a></li>
</ul>
</li>
<li><a href="news.html">News</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="portfolio.html">PORTFOLIO</a>
<ul>
<li><a href="residential.html">Residential</a> </li>
<li><a href="public.html">Public</a></li>
<li><a href="display.html">Display Gardens</a></li>
</ul>
</li>
<li><a href="site.html" class="MenuBarItemSubmenu">SITE AMENITIES</a>
<ul>
<li><a href="plantings.html">Plantings</a></li>
<li><a href="hardscape.html">Hardscapes</a></li>
<li><a href="water.html">Water</a></li>
<li><a href="furnishings.html">Furnishings</a></li>
</ul>
</li>
<li class="MenuBarVertical"><a href="contactus.html">CONTACT US</a></li>
</ul>
</div>
<script type="text/javascript">if(window.attachEvent) { window.attachEvent("onload", function() { cssmw.intializeMenu('cssmw',{select_current: 0, orientation: 2}); }); } else if(window.addEventListener) { window.addEventListener("load", function() { cssmw.intializeMenu('cssmw',{select_current: 0, orientation: 2}); }, true); }</script>
</div>
</div>
<script type="text/javascript">
<!--
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
</html> -
DVD-Rom drive in Satellite C655-S5128 not working properly in Windows 8
I recently upgraded my system from Windows 7 to Windows 8. However, the DVD-Rom drive after the upgrade no longer works properly -- it now treats the pre-recorded disk as if it was completely blank. I tried reinstalling the Toshiba Disc Creator, but that did not work.
Any solution?You apparently did not use the Toshiba Upgrade Assistant in upgrading to Windows 8. See HERE for DVD and Disk Creator problems occurring during the upgrade and solutions.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit -
Javascript drop-down Spry menu not working
I downloaded the Spry UI 1.7 menu bar from the widget browser and pasted the code into DW CS4. I could not place it as you can in CS5. DW throws up javascript errors, but the styled menu bar works in live view and in the testing environment on Firefox and IE6 (!). However, once I load it, it does not work. It appears as if the browser can't find the javascript or the styles. I've pasted the styles in my main style sheet and in the referenced sheet at: Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css. I've verified that the Spry-UI-1.7 folder is loaded and contains all the relevant files.
Any idea what I'm doing wrong? I've been working on this on and off for two days.
Here is the live page:
http://www.wengerfeeds.com/test/test2.html
Code
<script type="text/javascript" src="Spry-UI-1.7/includes/SpryDOMUtils.js"></script>
<script type="text/javascript" src="Spry-UI-1.7/includes/SpryDOMEffects.js"></script>
<script type="text/javascript" src="Spry-UI-1.7/includes/SpryWidget.js"></script>
<script type="text/javascript" src="Spry-UI-1.7/includes/SpryMenu.js"></script>
<script type="text/javascript" src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js"></script>
<script type="text/javascript" src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js"></script>
<script type="text/javascript">
</script>
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div class="wrap">
<div class="top"></div>
<div class="nav"> <ul id="MenuBar">
<li><a href="index.html">Home</a></li>
<li><a href="about.html">About Us</a>
<ul>
<li><a href="history.html">History</a></li>
<li><a href="mission.html">Mission</a></li>
<li><a href="sustainability.html">Sustainability</a></li>
<li><a href="locations.html">Locations</a></li>
<li><a href="tour.html">Tour</a></li>
<li><a href="media.html">Media</a></li>
<li><a href="millogram.html">Newsletter</a></li>
<li><a href="links.html">Links</a></li>
</ul>
</li>
<li><a href="products.html">Products</a>
<ul>
<li><a href="feed.html">Feed</a>
<ul>
<li><a href="layers.html">Layer Feed</a></li>
<li><a href="broilers.html">Broiler Feed</a></li>
<li><a href="swine.html">Swine Feed</a></li>
<li><a href="turkey.html">Turkey Feed</a></li>
<li><a href="specialty.html">Specialty Feed</a></li>
</ul>
</li>
<li><a href="soychoice.html">SoyChoiceTM</a></li>
<li><a href="soyoil.html">Soy Oil</a></li>
<li><a href="eggs.html">Eggs</a></li>
<li><a href="research.html">Research</a></li>
</ul>
</li>
<li><a href="services.html">Services</a>
<ul>
<li><a href="eggmarketing.html">Egg Marketing Services</a></li>
<li><a href="flock.html">Flock & Pullet Services</a></li>
<li><a href="lab.html">Laboratory Services</a></li>
<li><a href="hauling.html">Hauling & Warehousing</a></li>
<li><a href="booking.html">Purchasing & Booking</a></li>
<li><a href="http://www.wengerfeeds.wordpress.com">Knowledge Center</a></li>
<li><a href="grain.html">Grain Receiving</a></li>
</ul>
</li>
<li><a href="http://www.wengerfeeds.info">Markets</a></li>
<li><a href="opps.html">Opportunities</a>
<ul>
<li><a href="careers.html">Career</a></li>
<li><a href="contracts.html">Contracts</a></li>
</ul>
</li>
<li><a href="contact.html">Contact Us</a></li>
</ul>
<script type="text/javascript">
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
widgetID: "MenuBar",
widgetClass: "MenuBar MenuBarRightShrink",
insertMenuBarBreak: true,
mainMenuShowDelay: 100,
mainMenuHideDelay: 200,
subMenuShowDelay: 200,
subMenuHideDelay: 200
</script></div>Thanks, Gary. Thanks for the reply. I appreciate it.
It felt like it wasn't finding the js, but I didn't know why. It turns out my host didn't like the folder name. When you download the folder for the Spry 2.0 menu from the widget browser, all your js and css is stored in a folder named "Spry-UI-1.7." The menu worked locally, but once I loaded it, my server didn't like the folder name. I renamed the folder "Spry" and reset the paths, and it worked. I'm posting this here in case anyone else has this problem. Cheers -
Usb not working properly in windows 7 x64 (890FXA-GD70)
Hi,
I am currently having problems with my USB ports. A select few ports are not working. In the device manager, windows claims to have not started up related drivers. I tried fixing this by updating the drivers from the msi page. This caused all the usb ports to stop working. I am not sure what the problem is but however it does seem isolated to my windows 7 x64 install. My keyboard and mouse still work in bios, but not once windows 7 starts up. The keyboard and mouse also work when I use the system disk to restore back to a system checkpoint. I am at a loss as to what could be causing this or how to fix it when the drivers supported are failing me.
Any help would be appreciated. Thanks.
ChrisQuote from: Bas on 19-November-10, 22:57:34
Those few need extra drivers.
As they are USB3.0 ports: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=2025
Yea as I stated earlier, after installing these drivers all the usb ports stopped working in the current windows 7 install. -
ATI driver not working properly on windows xp
hello sir,
i have a problem and hope you can fixed it for me. the problem is, when im installed windows xp on my laptop. only Intel hd driver working but the ATI driver is not working ( not detetcted when done install driver). im trying install driver manualy, but still not working. So i dont know if ATI driver only used for window 7 or both. im used
G470 model 20078
Intel (r) celeron(r) CPU B800 @ 1.5GHz
tqWelcome to the forum!
Did you install the Windows XP Chipset Driver for your model prior to trying to install the Ati driver? The chipset driver must be one of the first drivers installed so that the operating system can correctly identify the rest of the installed hardware for their driver installation. Once the chipset driver is installed, reboot and then try installing the Windows XP version of the Ati driver.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance. -
Push Mail Not Working Properly for Windows Live Mail when Online At Windows Live Messenger
Hello,
This is quite an old subject, but it seems to be a recurring problem across versions of Windows Live Messenger handheld client software and Blackberry Internet Service server software. For some time, I used to have no issues with Live Messenger and Push Mail from Hotmail. Now, once again, I am having a huge delay, of several hours, when logged on as “Online” to Windows Live Messenger.
What makes me believe that it is not a Windows Live limitation, by design, due to protocols and notification mechanisms in use, is the fact that I can receive both push mail and instant message notifications, immediately, as long as I am logged on to Windows Live Messenger as “Busy” or “Away”. If the protocols in place allowed notifications to only a single service at a time, I believe it should not work regardless of the status on Windows Live Messenger.
I have been using Hotmail for quite a while and most of my friends use Windows Live Messenger, so I would like to keep both working in my BlackBerry. I understand BlackBerry has a commitment to offering broad compatibility, great stability, and better integration than other solutions on the market that appeals to fancy user interfaces and forget about objectivity. Having a mobile platform that can keep both the corporate and consumer world happy is definitely a great advantage. There are several loyal users that would like to keep sharing the proficiency on a common user interface for business and personal use.
I do not often post messages to online forums, but this is an issue that has been annoying me for quite some time and I am really looking forward to a solution. Is anyone experiencing the same behavior with Windows Live Messenger lately? Is RIM looking for a solution?
Thanks,Ahhh...given that description, it may be WAD (Working As Designed):
KB15747Email message delivery is delayed because of an integrated Windows Live Hotmail account on the BlackBerry smartphone
As such, there would be nothing to report...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Simple button highlights in PSD menu not working properly in Encore
I'm having some trouble making even basic menus this week - I'm working on a couple of projects that need simple menus on their DVDs, but I can't get them to work.
For one project, it's a simple menu with a photo as the background and two buttons - 'Play' and 'Behind the Scenes'. Each button group consists of a text layer with the button title and a layer called '(=1) Highlight'. The highlight layer is a simple straight line underneath the text. Nothing is overlapping, however the line is not appearing on one of the buttons. The group is detected as a button in Encore, and works when it is linked to the timeline, but the line does not appear
With the other project I've been working on this week, there's a few menu pages - a main menu, and some chapter select sub menus. These menus look a bit fancier, but the buttons are still fairly simple - they basically consist of a line of text, but this time the highlight is a rectangular outline. I'm having what looks like the same problem with these menus - the highlights aren't displaying correctly. Most of the outlines are missing their bottom lines - so only a three-sided box is appearing.
I've made plenty of menus before using the same method, and more complicated ones than this too, without running into any issues. I haven't been able to figure out what the problem is, despite starting over and making the menus from scratch several times, and making them one step at a time, importing them into Encore at every step to test. At some point, one or more of the highlights will always stop working. Despite this systematic approach, I'm still baffled. I'm using Photoshop CS5.1 and Encore CS5.1. After running into problems on one computer I tried making menus from scratch on another computer with the same version software but had the same problem.
Has anyone got any suggestions of things I should try that might solve this problem? I can send an example of a menu that's not working for me if anyone would like to take a look.Thank you, everyone, for your continued support.
I have tried everything suggested here, plus lots more, since I last posted. There are glitches no matter what I do. I don't think it's anything to do with what I'm doing in Photoshop as I've tried using some menus from the Encore library and I'm having the same problem with those. I've also tried using buttons from the Encore library on my menus with the same result.
But that got me to thinking - perhaps it's just a glitch with Encore's previews. So I tried actually building a DVD image, even with the menus that appeared to be broken, and they turned out to be fine. So it must just be a glitch in the Encore preview.
I've also discovered another bug while doing this - if you create a menu in Encore, it's always NTSC, even if the project is PAL. It makes a 4:3, 720x480 menu with a PAR of D1/DV NTSC 0.91. Surely, if you've set up a PAL project, and you create a new menu, it should create one that's actually PAL?
Maybe you are looking for
-
How come the ipod on my phone doesn't show the songs I loaded onto it?
Just got the iphone 4, loaded some apps, synched it up to my computer and loaded a couple of movies on as well, just for fun. When I open ipod on my phone, there's nothing there. It suggests I go to itunes to find songs. I plugged the phone back into
-
I update my ipad and not give me the option to take panoramic photos
i update my iPad with th iOS 6 and i cant take panoramic photos, the option no appears. if somebody can helpme i will appreciate. thanks
-
One day I just went on my iPod on messages and the log in sign showed up I tried logging in and it just brought me all the way back it is the same with FaceTime please help!
-
Can't share hotel internet connection
I can only connect to the hotel internet when I have the Airport Express connection sharing setting in 'Off (Bridge Mode)'. In this mode my iPod Touch can see the network and connect but requires its own daily payment for internet. Needless to say I'
-
Hyperion Shared services -OpenLDAP Recovery
Hi, Can you please share the steps to recover when the shared Services is corrupted. The version 9.2.X Thanks for your help in advance. Regards, Upendra..