HELP! Tilelist effects not working when dataprovider is filtered
Hi All,
I have a tile list displaying thumbnail images which is bound
to an
array collection. I have a nice little DefaultTileListEffect
on the
tile list to fade things in and out when changes are made to
the array
collection.
I notice that when I filter the array collection using its
filterFunction that the effect does not run on items that get
filtered
out or in... any ideas on how to get this to work? It would
be quite
nice to have the images fade out as they no longer meet the
filter
requirements and fade back in when they do.
Cheers,
Brendon
I'm seeing similar behavior here. Upgraded Premiere CC 2014 to the latest version. Opened my project and continued working. A couple of clips (seemingly for no reason) cannot be moved around in the Program monitor and the Effects Panel appears blank. If I click on another clip I see its effects but when I click back to the problem clip it is blank (or retains the effects info from the working clip). There seems to be no rhyme or reason as to why this particular clip is causing a problem. Screenshot:
Any thoughts? Thanks!
Vaughn
Similar Messages
-
Help! Javascript not working when object moved from one page to another!
Hello all:
I am new to Adobe Livecycle Designer (version 8.0). I have created a 3 page interactive pdf form with numerous objects (text fields, radio buttons, drop-down boxes, etc.), that our business wants to begin using soon.
I am having difficulty with some of my Javascript not working with a few of my objects on page 2 of the form. Specifically, there is a drop-down box for "Country" on page 2 of my form. When the user selects, for example, "United States" from the list, I have Javascript that is supposed to change the "Currency" drop-down box rawValue to "US Dollars" accordingly (upon the change event).
I think my Javascript syntax is proper, but I am not certain. Here is my simple Javascript associated with the "Country" drop-down box (Note: rawValue 80 = "United States" and rawValue 105 = "US Dollars"):
form1.Page1.cmbContactInfoCountry::change: - (JavaScript, client) -
if (this.rawValue == 80) {
cmbCurrency.rawValue = 105;
This seems pretty straight forward and it WORKS when my "Country" drop-down box is moved to page 1 of the form, but it WILL NOT WORK when I move the "Country" drop-down box back to page 2 of the form (which is where it belongs).
Does anyone have any suggestions or solutions? I have spent probably 6-8 hours racking my brain trying to figure out why it works when on one page, but it does not work when move to a different page. I am guessing that I may have corrupted something OR that I am not fully addressing the proper name of the object?
Please help!
Frustrated and helpless near Chicago!
Taylor THi Jono:
Thank you for your quick reply.I was able to obtain the full name of the cmbCurrency object using the method you taught me. That is brilliant! Great short-cut tool.
Unfortunately, I am still having issues with getting Javasript for the cmbCountry object to work with the cmbCurrency object. I haved pasted my new Javascript below.
JavaScript for cmbCountry object:
//UNITED STATES
if (this.rawValue == 1) {
xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 1;
else
//CANADA
if (this.rawValue == 2) {
xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 2;
I have checked the "Specify Item Values" checkbox of the cmbCurrency drop-down object and Value 1 = "US Dollars" and Value 2 = "Canadian Dollars".
When I select "Canada" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object is changed to "US Dollars" (when it is clearly defined as "Canadian Dollars"). When I select "United States" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object stays blank for uknown reasons. Very strange.
Since I am not able to further explain in detail on what I am experiencing, I have posted a link to my file below (I just signed up for an account at ShareFile). I would forever be indebted to you if you can help me figure this out!
https://thomptk.sharefile.com/?cmd=d&id=07ede2fe11db4549 -
Walkman beat light effect not working when throw is activated
When I connect my phone to a bluetooth receiver and play music via walkman the light effects aren't working, only when I pause or change the track. It doesn't really disturb me but I'd like to know if there is a possibility of changing it or if it is what it is. Thanks
having same problem ...
i throw it to sbh 50 . light effect is not turn on .. -
Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!
what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN -
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario -
My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
-
i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Picture hyperlinks not working when published? Please help....
Some of the hyperlinks to my pictures do not work when I publish to my folder. I´ve tried to empty Safaris cache but it still doesn´t work. Please help me, pretty urgent....
hi briebrie,
this is common mistake, see my post in this thread:
http://discussions.apple.com/message.jspa?messageID=4004970#4004970
The work around is to leave iWeb default nav bar and header enabled, add your home made nav bar (outside/below of iWeb default nav bar).
Then turn off iWeb nav bar and header when you are done. -
I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?
Are you connecting your iPhone directly to your PC or to a USB hub?
-
How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?
Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best. -
I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?
Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
i have update my 3g software to 4.21 but its not working when it come to restoring firmware its show a error please help me out
That error shows up when a phone is jailbroken or you are trying to downgrade the iOS version. Neither of which is supported by apple.
-
microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.
Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair. -
I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?
But they work normally when not plugged in? What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle. I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
B-rock -
I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
Help/input would be much appreciated. Thank you!
Kristen.you should properly install adobe products, not move, migrate or otherwise transfer them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
N800 can no longer see any wireless access points....
Not only can I not see my WLAN, but I can't see any of the many in the surrounding area. I had no problem getting and staying connected in the previous weeks, but for whatever reason, a scan of for WLANs returns zero as of yesterday. -chris
-
I have already updated my Migration Assistant program and changed my FireWall settings to allow all incoming connections, but Migration Assistant still isn't working. I get all the way to the passcode verification step, and then it stops working. On
-
Can't get certificate in servlet filter?
i have a filter and a jsp. currently, both the filter and the jsp attempt to pull the X509 certificate from the request and log it (eventually the filter will perform authentication and the jsp will be a web service). however...the filter is unable t
-
WLS 10.3: Channel Property OutboundEnabled=true. What does it do?
Hi, in the course of trying to find good configurations that will support rapid activation of standby wls-servers in case of machine failure or catastrophe, we've stumbled across some behaviour that we want to understand better. We want to know what
-
Maximum document lenght with Epson Stylus 9600 Pro?
Hi! I'm trying to print a long picture on Epson Stylus 9600 Pro printer from Adobe Photoshop CS 2. The maximum allowed length is 2.5 meters. The printer is capable to print longer documents, since I am using a roll paper. Is this a limitation of Phot