HELP!! USING Aiport Express with PPTP!!

Hy!
I bought Airport Express and i´m using an austria provider which is using PPPtP connection.
So what can i do that AE works??
Thanks Rene´

Do you have only one computer or many that are connecting to the AirPort Express (AX)?
If you only have one, try this:
Configure the AX so that the option to distribute IP addresses is DISABLED.
Save the settings and close the AirPort Admin Utility.
On your Mac, open Internet Connect.
Click VPN (PPTP).
Choose Edit Configurations from the Configuration pop-up menu.
Choose None from the Encryption pop-up menu.

Similar Messages

How to use Aiport Express with Verizon FIOS Actiontec MI424WR

The Airport Express won't connect to the Actiontec MI424WR FiOS router when it's set to use WPA2 encryption.
I figured this out after a couple of hours of resetting the Airport Express and Googling the issue.
It's annoying to have to "downgrade" to WPA but other than leaving the network unprotected, that's the only way to make them work together.
So on the Actiontec, use WPA TKIP & AES (make sure both TKIP & AES are selected as AES alone won't work either) encryption.
On the Airport Express pick WPA/ WPA2 Personal.
The Pass-Phrase should obviously be the same.
I hope this helps someone by showing-up in Google searches for people.

Thanks for your post.
Apple does note that the AirPort Express cannot join "other" networks using WPA2, but it's buried in the fine print of footnote #3 on the spec sheet, so most folks are going to miss that bit of information.

Using Aiport Express and internet at the same time?

I was just wondering if anyone could offer any advice on this subject please?
I've got a Macbook running through a wireless BT ADSL modem. I have also managed to connect the Macbook to my Aiport Express to allow me to wirelessly pipe iTunes through my stereo. I am aware that you cannot run both at once (i.e pipe music and browse the web) due to the Macbook being able to be only connected to one wireless network at a time.
My questions is whether there is anyway round this? If I bought an Aiport Extreme base station, connected that to my wireless router and used the Airport Extreme base station for the wireless connection would I be able to add the Aiport Express to that wireless network and subsequently have the internet and the Aiport Express running on the same wireless network - hence being able to pipe the music wirelessly and also browse the web at the same time?
Or is there another way round it?
Any info anyone could offer would be a great help
Thanks in advance
James

Ahh am I right in thinking this is the way to do it?
http://docs.info.apple.com/article.html?artnum=302153
Thanks
James

Airplay through iPhone using Aiport Express

I have recently purchased a Time Capsule 2T for my new iMac (which is located downstairs in my office). The Time Capsule wireless reaches to my back porch. I have my stereo equipment upstairs, which controls the speakers around the house. Before I purchase an Airport Express to plug upstairs into the stereo equipment, I wanted to know if it was possible to control my iPhone 4s (while on wi-fi) through the Airport Express to my stereo for sound around the house. I do not want to control my iTunes on my iMac, (I already know about the Remote App), but I want to control my iTunes and Pandora, ect. from my iPhone 4s through the Airport Express upstairs to the stereo it is plugged into. Please advise me the best way to accomplish my goal of playing sound FROM my iPhone 4s (anywhere in the wifi range) to the stereo upstairs that is away from the iMac and Time Capsule.

Hello Eric,
With the iPhone ios 5.0 came AirPlay which will accomplish what you are trying to do quite well, with the help of the AirPort Express. The AirPort Express can be connected to your network with ethernet or over wifi. You need to configure the AirPort Express with a computer first (Mac or PC is fine, download the controller program from Apple.com) Once the AirPort Express is configured to join your wireless network, join the same network with your iPhone and start the ipod app to play a song. In the bar next to the volume control on the iPhone, a box with an up arrow will appear. tapping that will list the available AirPort devices. Choose the AiPort Express device you configured to send the song from your iPhone to the AirPort Express. The AirPort Express can be attached to your stereo with a 3.5 head jack to optical cable (available at radioShack) - or 3.5 to RCA connectors.
If you receive an incoming call AirPlay will mute the song and let the ring be heard over the stereo (can be nice or bothersome...) and pick back up in the song when you end the call. The wifi range for the original AirPort Express wasnt the best, but the newest version is better. (Note) multiple airports can connected straight to speakers throughout the house and be controlled from the iPhone, name each device unique to its location and have a slick way to control surround sound...
Hope this helps.
Mark

HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav

Hi,
I just purchased the newer Airport Express (new) and am having issues using it in client mode with my Netgear N150 wireless router. All I want to use it for is streaming itunes from my aluminum macbook to my home stereo system, wirelessly.
I have followed the instructions that came with the device. No luck. I have followed the instructions that describe plugging it into an ethernet cable here:
http://support.apple.com/kb/HT1731
With the apple instructions linked above it would connect fine to my existing wireless network, using airport utility, with 'excellent' connection, but when I tried to switch in itunes to my device from my computer i get the pinning wheel and an 'unknown error' occurs.
I have setup a new wireless account and password on my router as desribed at this page, but do get confused when it tells me to use the hex key and $. Haven't worked that out yet. Any advice would be appreciated if this would help.
http://hints.macworld.com/article.php?story=20041017233832771
At best, after hard resetting the device several times, and following the instructions above at macworld, it now finds the device but only plays one blip second of a song, flashing amber from solid green, sometimes playing a second blip of a song, then pausing the song and switching to a flashing amber. By restarting my computer or opening AirPort utiliy I am able to find it again, but it either only plays one second of a song and drops again or turns green and is not able to be found at all by itunes (the button doesn't show up in the menu).
This is the second airport I have tried in 2 years. I purchased a used one and had nearly the exact same issues with a linksys router. Then it would play an album but reset if a song was paused.I had to hard reset it nearly every time i wanted to stream from itunes to my stereo. I assumed it was broken and sent it back. Figured I 'd give it a new go around with a new unit since i just moved into a new house and am now shocked at how difficult it is to set up. I have never had this many issues with an apple device.
My questions:
1) How can I set this up with my existing router? What am I doing wrong?! Why is it so difficult?
2) If not possible, what routers are compatible? I would gladly get a new router in order to stream music to my stereo from ITunes.
thank you for any assistance. i am pulling my hair out.

Try temporarily disabling the Windows 7 firewall, and then, try accessing the AirPort with the AirPort Utility again.

Using Airport Express with Netgear bridge

I have an imac G3 with a Netgear Wireless ethernet bridge which I use to get wireless internet from a Netgear DG834GT wireless router/adsl modem . -this works fine.
I would like to be able to send music from itunes on my Imac to a Airport Express in another room so i suppose my question is - will the netgear wirless ethernet bridge (a WGE101) on the imac see the aiport express?

Yes it will - but the concept isn't exactly as you described it. What you will be doing is setting up the Airport Express to "join" the wireless network created by your Netgear wireless router. Music streamed from your iMac is sent first to the Netgear wireless router, then the Netgear wireless router sends it to the Airport Express.
To set this up, see the instructions posted here by David Lovell (works for PCs and Macs):
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT

Using Airport Express with Internet Sharing in Leopard

Howdy all,
I have Internet Sharing enabled on my MacBook Pro running Leopard 10.5.4. I use a Sprint Sierra Wireless Aircard 597E modem to connect to the Internet.
I'm trying to get my Airport Express & Time Machine to recognize my MacBook Pro, or the other way around. Basically, I want to be able to access the Airport Express to wirelessly play music through a pair of speakers and be able to access the Time Machine for backups & accessing files.
With Internet Sharing enabled, my iPhone can access the web, so I believe I have the sharing set up correctly. However, I can't see the Time Machine and my Airport Express just keeps blinking amber.
Does anyone know what I might need to do to resolve this issue?
Any help is so very very much appreciated!

Thanks Kappy,
I'm not sure you're exactly following me on this one, though. Here's what I've discovered on my own for anyone else facing the same situation I am:
1. You /cannot/ use Airport Express while using Leopard's Internet Sharing.
2. If you want to create a local network, in this situation, you'll need to use Time Capsule to establish the initial local network, then join the Airport Express into that network. At that point you can use Time Machine with Time Capsule, access it as a hard drive and use AirTunes with the Airport Express.
But you cannot use the Sprint AirCard (and I assume any other similar setup) and your Mac with Internet Sharing to build the local network and then join the other devices to it. Unfortunately.

Can I use logic express with my Macbook

I just got a macbook and i was wondering if I can use Logic express or pro on it??

yes!
it of coourse depends what you want to do with it - but yes!
by all acounts logic express and pro will run very well on the new macbooks.
I'm using pro on my old powerbook - just about manage to use it live and it's slow but useable to get ideas down onto and am using an intel imac as my main studio computer with logic pro 7.2.3 - it's essentially the same as a macbook except it doesn't have integrated graphics and it has a faster hard disk which does make a difference. Apart from that i'm sure your new macbook would toast my powerbook in terms of performance.
Be sure to get the intel version of logic (7.2 and above) as an older "ppc" version may run but is not supported and would probably run very slowly.
Enjoy!
Rounik

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Can I use Airport Express with a USB Hard disk as a NAS solution?

What have people tried for NAS solutions that work really well wirelessly? Can I use my Airport Express with its USB port to attach a hard disk? Or do I need an Airport Extreme base station? Or some other solution?

The price of the Time Capsule includes the NAS backup system plus a hardware router for your network.
Macs do not support USB 3.0 and most likely won't because Apple's weight is behind Thunderbolt which is considerably faster and more versatile than USB.

How to use Aiprort Express with iMac DV

Hello,
I'd like to use an Airport Express with an old iMac DV SE 400mhz. It's running Tiger. All I need it to do is run Airtunes. And I need a solution that doesn't require me to scan eBay for an old airport card, because I need to try to make this happen in the next couple days. Any ideas?
Thanks for any suggestions.

Do you currently have an Ethernet network? If so, could the AirPort Express (AX) be connected to this Ethernet network? If so, there is no need to make your iMac DV wireless at all. It can stream music over Ethernet to the AX.
router <-+-> iMac
.........|-> AX
If you do need to make your iMac DV wireless but don't want to get an AirPort card, you will want an Ethernet wireless adapter. Examples of Ethernet wireless adapters are the Linksys WET11, Linksys WET54G, and the Buffalo Technology WLI-TX4-G54HP bridge.

Using Airport Express with a new (so far unopened) MacBook

I'd like to use my MacBook without extraneous cables around the house and when I go away. I understand I need Airport Express (or is that Extreme to do this), but I would also like to change my ISP before I configure the new Macbook. Any thoughts, suggestions, advice to a total novice in these matters?
iMac Mac OS X (10.4.6)

Your MacBook will work with either an Airport Express or Airport Extreme base station, and if you only have a MacBook than the Express would be a better choice of the two.
Are you going to use cable or ADSL?
Check out the following website.
Reviews of equipment
http://www.adslguide.org.uk/reviews/
Comparisons of ISPs
http://www.adslguide.org.uk/isps/compare.asp
I would suggest going for a wires only deal and purchasing your own equipment.
Do not get a USB modem unless you are going to only use it to keep a door open or similar...
As most ADSL Modem Routers are setup through a web browser you should be fine with a Mac.
Personally I use plusnet and Netgear ADSL Modems. One is a DG834G combined device and the other is a DM602 Modem Router connected to an AEBS.
If you really want an Airport Express, I would also check out ADSL Nation's X-Modem M3 http://www.adslnation.com/products/xmodem-m3.php It is also now available from the UK Apple store and retail stores.
http://store.apple.com/Apple/WebObjects/ukstore?productLearnMore=TJ151
which can also be used in conjunction with an AEBS or AX.
iFelix

Using airport express with a 2wire router

I just got Bellsouth DSL with a 2wire dsl modem that is also a wireless router.
It works fine, but I still want to use my airport express to listen to music.
I can't figure out how to do so, though I have tried various configurations
with the airport setup utility. Anyone have any ideas? How can I use
express with another wireless router?

Let's double-check your AirPort Express Base Station's (AX) settings ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing 2wire's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Help using file sharing with different users accounts on same Macbook

Hi, I just wanted a little help using the file sharing option. My wife and I had different users accounts on the same MacBook, but when I am trying to share my baby's picture from my documents folder for my wife to have the same picture, I can't find the way to do that; I am not been able to find my pictures on my wife's account. Is there any way that I could share a folder from my account and my wife to have the same files at the same time on her account?
I mean, something like the smart play list on the itunes?
Thank you

You can't do that directly unless you change permissions on your whole Documents folder which is not a good idea. Your wife can see your Documents folder from her account by going to Users/yourusername/Documents. However, this folder has no read privileges for others except yourself by default so she won't be able to open it.
rather than changing permissions on your Documents folder, you can place the pictures you want to share in Public folder in your home directory or in Users/Shared folder.

Can I use airport express with my osx 10.3.9

I have osx 10.3.9 and would like to upgrade to to lion maybe and use airport express if possible .....what do I need to do?
Oneday26

So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1

HELP!! USING Aiport Express with PPTP!!

Similar Messages

Maybe you are looking for