HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav

Hi,
I just purchased the newer Airport Express (new) and am having issues using it in client mode with my Netgear N150 wireless router. All I want to use it for is streaming itunes from my aluminum macbook to my home stereo system, wirelessly.
I have followed the instructions that came with the device. No luck. I have followed the instructions that describe plugging it into an ethernet cable here:
http://support.apple.com/kb/HT1731
With the apple instructions linked above it would connect fine to my existing wireless network, using airport utility, with 'excellent' connection, but when I tried to switch in itunes to my device from my computer i get the pinning wheel and an 'unknown error' occurs.
I have setup a new wireless account and password on my router as desribed at this page, but do get confused when it tells me to use the hex key and $. Haven't worked that out yet. Any advice would be appreciated if this would help.
http://hints.macworld.com/article.php?story=20041017233832771
At best, after hard resetting the device several times, and following the instructions above at macworld, it now finds the device but only plays one blip second of a song, flashing amber from solid green, sometimes playing a second blip of a song, then pausing the song and switching to a flashing amber. By restarting my computer or opening AirPort utiliy I am able to find it again, but it either only plays one second of a song and drops again or turns green and is not able to be found at all by itunes (the button doesn't show up in the menu).
This is the second airport I have tried in 2 years. I purchased a used one and had nearly the exact same issues with a linksys router. Then it would play an album but reset if a song was paused.I had to hard reset it nearly every time i wanted to stream from itunes to my stereo. I assumed it was broken and sent it back. Figured I 'd give it a new go around with a new unit since i just moved into a new house and am now shocked at how difficult it is to set up. I have never had this many issues with an apple device.
My questions:
1) How can I set this up with my existing router? What am I doing wrong?! Why is it so difficult?
2) If not possible, what routers are compatible? I would gladly get a new router in order to stream music to my stereo from ITunes.
thank you for any assistance. i am pulling my hair out.

Try temporarily disabling the Windows 7 firewall, and then, try accessing the AirPort with the AirPort Utility again.

Similar Messages

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

I need to know how to connect to internet using the netgear n150 wireless router

I recently signed up with comcast internet. They supplied a NETGEAR N150 wireless router. After following instructions that came with router, I still cannot use the router to connect to the internet. The computer has to be connected directly to the modem for internet access. HELP!!!!

Here are some of the recommended setting from Apple. Maybe that will help.
http://support.apple.com/kb/HT4199
Regards,
Captfred

How to setup netgear N150 wireless Router to apple tv ?

im an infant that has finally given in to technology, that could use a little help
setting up NETGEAR N150 wireless router to my Apple TV ?

See my other reply. Avoid double posts if you can.

Using Airport Express with Netgear bridge

I have an imac G3 with a Netgear Wireless ethernet bridge which I use to get wireless internet from a Netgear DG834GT wireless router/adsl modem . -this works fine.
I would like to be able to send music from itunes on my Imac to a Airport Express in another room so i suppose my question is - will the netgear wirless ethernet bridge (a WGE101) on the imac see the aiport express?

Yes it will - but the concept isn't exactly as you described it. What you will be doing is setting up the Airport Express to "join" the wireless network created by your Netgear wireless router. Music streamed from your iMac is sent first to the Netgear wireless router, then the Netgear wireless router sends it to the Airport Express.
To set this up, see the instructions posted here by David Lovell (works for PCs and Macs):
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT

Using Airport Express with an ATT DSL router

July 10, 2012
Hi All! The following thoughts are for
     1) those of you who use ATT DSL as your internet service-provider, and
     2) who wish to stream iTunes songs from your computer to speakers in other rooms via AIRPORT EXPRESSes, and
     3) are wondering whether you have to purchase a separate Apple Airport Extreme base-station, or can simply use your exisiting ATT router.
Having just spent several days and many hours on the phone before Apple's tech "Dan" was finally able to get my system up and running, I thought some of you might appreciate my sharing the following info while it's still fresh in my mind.
1. You may need to update your ATT router to the latest version, in order for it to properly communicate with your AIRPORT EXPRESS(es) (henceforth shortened to "AEs"). The AEs use 802.11n speed. My original ATT router (a 2Wire 2701HG-B) was no faster than "-h," and this might have been part of the problem as to why my system wouldn't work. I went to my local AT&T store, and got their latest router: as of this writing, a Netgear "Westell" Model B90-755025-15, which can run at both the slower speeds as well as the faster "-n." To find out some of the specs of my router, an Apple tech had me type in the 10 digits of my Gateway IP Address into the address-bar (no need for the "https://www") and "Presto!", up popped several pages of info on my router.
2. When first setting up your AE, it needs to be back in "default mode." If it's right out of the box, you don't need to do anything. But if, like me, you've already made several attempts to get it running, then you need to reset it to its pre-configured state, You do that by taking a bent paper-clip, and inserting one end into the little hole on the ports-side of your AE (near where the mini-plug of a speaker-cable is inserted). While the device is plugged in, gently press the paper-clip into the hole until the light on top blinks amber QUICKLY, the flashes coming in rapid succession. Then remove the paper-clip, and the AE will glow solid amber--meaning it's waiting to be re-programmed.
3. When first setting up your AE, do NOT attach an ETHERNET CABLE from the router. The only cable that needs to be attached is the mini-plug cable running to some sort of portable, powered speaker. For myself, to make things easier, I brought my AE and my new Sony RDP-M5iP speaker/dock into the same room as my Imac & router. That way, I'd know immediately if the AE was working correctly.
4. After you've clicked on your Airport Utility App (hard drive TO Applications TO Utilities folder), you'll soon come to a page that asks you to name your AE (this page calls it a "base station"). Before you do that, you should see a button in the lower left-hand corner that says, "Other Options." Click on it. You'll then be given a choice of "Creating a New Network" or "Choosing an Existing Network." You want this 2nd choice--because you indeed are planning to use your ATT router's exisitng wireless network.
5. Shortly, you'll come to the page asking you to name your AE. Call it, for instance, "Family Room Speaker." As for password, at first I--as well as virtually all of the techs with whom I spoke--thought I should type in the multi-digit ATT router-password (called a "Wireless Network Key"). But finally, "Dan" told me to simply type in, "express1" (or, for my 2nd AE, "express2"). That did the trick!
6. Your AE should now be glowing green on top. Plus, on the 10x6" dark-grey rectangular box displaying the globe (i.e., your main internet connection), the globe should have a now-green glowing circle to its left. And underneath, it should be displaying a rectangle named "Family Room Speaker" (or whatever name you've given your Airport Express).
7. When you now open iTunes, you should see a little blue rectangle (with a triangle in its middle) in the lower right-hand corner of your iTunes box. Click on it, and it should show listed both your computer-speaker as well as your AE speaker(s), plus a heading called "multiple speakers." Click on "multiple," and it will bring up a box displaying all your now-current speakers. Check the small square next to any speakers that are unchecked, and a volume-slider will appear. Bring them all up to a comfortable level. Then click on an iTunes track you'd like to play and, viola!, you should hear music playing both from your computer and from the portable speaker to which your AE is attached.
8. Now close iTunes. Then unplug your Airport Express and--if you have a 2nd AE-- plug them both back into your power-strip. Go thru the set-up steps in your Airport Utility App for this 2nd AE. At the end of it, both AEs should be glowing green on top, and both should be displayed on your computer-screen.
Now re-open iTunes, and start a song playing. (Don't forget to click on the blue rectangle at the R-hand bottom, and activate the new AE speaker.) By inserting your speaker cable alternately into each of the AEs, you should be able to verify that, yes, both are now working.
9. Unplug both AEs, and bring them to whatever room you want to use them in. Plug them in to a wall outlet, and run your mini-cable from the AE to the speaker. Give the AEs a few minutes to pick up the signal once again from your ATT router; when they do, their lights will change from amber back to green. Tech Dan warned me to keep them away from too much metal, to avoid interference. As soon as they turn green, you should now be hearing your iTunes track playing thruout your house! (If not, you may have to first close iTunes on your computer, then re-open it, and start a new track playing.)
The BOTTOM LINE: no, you don't have to purchase a separate Apple Extreme to be your base-station. Your ATT router--if it's running at the 802.11n standard--should be able to work with your Airport Express(es)!
My thanks to Sean and Cameron and Chris and, most especially, Dan, the Apple techs who patiently worked with me to get this system online.

I am GREATLY appreciative of this overview. Even though I don't understand a lot of it. I will keep working through. I am-- have for 2 years-- had terrible connectivity with AT&T's service & 2Wire router. My MacBookPro keeps dropping the signal. I'm talking every few clicks at times. Husband's PC drops it, too, but not nearly as much as the Mac. I'm sure what you posted can help us get better connectivity.

Airport express with hard-wired medem router?

hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
Can anyone please assure me that this set up would work:
lounge: iMac with aiport card.
bedroom upstairs: pc with usb wifi thing
living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
thanks for your patience!
also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

Anyone used Airport Express as bridge w. wireless router other than Apples?

I have my QS 867 hardwired to my highspeed modem and a Netgear 624GT wireless router attached. My PB has been having trouble with the signal in certain spots due to all the jazz about the alum interfering w. the antenna. When I try to setup the Airport Express with my Netgear network and use the Airport as a bridge/range extender, it does not recogize the Netgear router. It seems to specify in the instructions that you MUST use an Airport Extreme Base Station. Is this true? Has anyone used the Express as a bridge with a wireless router other than the Base Station?

At one point in time I did have an Airport Express working in WDS over WEP with the Belkin F5D7230-4 and F5D7130. It's unsupported and difficult to get setup. It tends to causes them to lock up and need to be rebooted.
We ended up just dropping the Belkins and getting more Airport Expresses as the Belkins couldn't support doing WDS over WPA (which we've since moved too).

Using Airport Extreme with a Netopia Wireless Router 2247NWG

Hi, I'm trying to set up an airport extreme base station (AEBS) with a netopia wireless router and my XP SP3 Laptop. I have the extreme plugged into the router and the set up of the AEBS went fine. I have a solid green light on the AEBS and it appears to be working OK. When I move to another room in the house, I have two wireless networks available - the netopia wireless router and the AEBS. Whichever of the networks I connect to, the signal strength is extremely poor and the other is showing available with 5 bars. When I connect to the strong network, the signal goes weak and the original network is available with 5 bars. I've tried disabling the wireless on the router but this doesn't help. The router network is still showing as available with 5 bars but I can't connect to it.
First day with my MAC gear (haven't even opened the MacBook box yet) and I need help!!!!!!!!!!!

So, today I finally broke down and plugged them both into the two available ports in the back of the AEBSn via ethernet cables. My question is: Do I have to "turn off" the airport connection in order to make the ethernet connection the default connection?
That might help but it isn't necessary. You can simply rearrange the order of items in the Network preference pane.
Search on the internet and you will find many ways to check the speed. One is http://us.mcafee.com/root/speedometer/default.asp

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

Airport express and the existing wireless router problem.......

Ok,
I have a wireless router working fine in my house in fact i'm using it right now with my old
12" G4 power book to send this message, but i have recently bought a mac pro and totally forgot to put an airport card in it when configuring it. (oops) so i have bought an airport express to link the mother ship up to the internet and network but with no joy so far!!!
can anyone help,i understand to do this the airport is set to "Bridge Mode" but i still can't get the bugger to work.
Please help.
(step by step instructions would be great)
Message was edited by: alphasonic

alphasonic, Welcome to the discussion area!
Is your "wireless router" an AirPort Extreme base station (AEBS) or another AirPort Express (AX)? If not, you probably will not be able to do this.
The Ethernet port on the AX is active ONLY when the AX uses WDS to wirelessly connect to a network. Unfortunately most (nearly all) are NOT compatible with Apple's WDS and therefore this is not possible.

Help a newbie: Windows XP, Netgear WGT624 Wireless router & AE

I just installed a Netgear wireless router and am trying to setup the AE to play music on my home stereo. For some reason when I connect the AE to the outlet close to my living room home stereo, the Airport setup Assistant doesn't recognize my base station. I don't know what to do. I know my wireless router is setup correctly, but I can't figure out the AE setup process. Please help!

Do you have any wireless encryption activated on your Netgear Wireless Router? If so, you should disable it, then your wireless router should be able to connect to your AE. Then configure your AE to match your security settings of your wireless router, then finally re-activate the wireless security on your router.
(Make sure you select "Join an exisiting wireless network" when configuring the AE, enter the data carefully to match the security information in your router.
Once you re-activate your wireless security in your router and restart the AE, it should join your network.

Airport express to conect to wireless router

Hi I'm try to use my airport express on an imac with no in-build wireless which I want to use as a 'surf and write' for my daughters. The imac is running 10.3.9, and I've connected the Airport express via the ethernet cable. I used the airport admin utility to set the Airport express to connect to a network, and I've been trying to use Network set up assistant to link it into to my 2Wire homeportal. Can anyone help with this? Is the possible? If so, where do I find all the right settings?
Cheers.

Duane,
thanks very much for explaining the relationship between wds and the AEX ethernet port. I just switched to att uverse which provides a 2wire DSL router. My old ist gen iMacG4 was connected to the old network via an AEX (airport express) wirelessly connected to an ABS (airport base station). If I connect the ABS via ethernet cable to the 2wire router, can I bridge to the AEX and my G4 at the same time extending my wireless coverage?
Thanks
David - Dallas

HT1126 Can I connect the Airport Express directly to my wireless router?

The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
should I reset the system?

can i connect the airport express into an ethernet port in the wall
I assume you are asking about obtaining an Internet connection here.
First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
If no, then you can connect the Express, but you will not have an Internet connection.

Will AirPort work with my current wireless router?

I have a Linksys WRT54G wireless router. I'm thinking about getting two AirPort Expresses for AirTunes. But I wanna know that if I get one AirPort Express in my room with my stereo, and my wireless router to my computer with iTunes, if AirTunes will work. Has anyone tried this? Thanks!

The answer is yes. Quoting the Airport Express FAQ:
Question: If my computer is associated with a non-Apple wireless access point, can iTunes send an AirTunes stream to the AirPort Express?
Answer: Yes, if AirPort Express has joined the network in client mode, or if it is connected via wire to a LAN port on the non-Apple wireless access point.

HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav

Similar Messages

Maybe you are looking for