Help with a simple animation
Hello everybody!
I need a little help about an animation using Lingo!
I need to make 8 sprites and make them look as a volume controler and then make two bottons ( " - " and " + ") and make it looks like that those two bottons controle the volume by pressing " + " , sprite(1) should appear and then when I press it again sprite(2) should appear and so on till sprite(8); and the same thing for the " - " botton, when pressed, sprite(8) should disappear and when pressed again sprite(7) should disappear and so on...
Any help will be appreciated!
Thank you in advance!
There is certainly nothing at all wrong with the suggestion supplied by pallottadesign, but I thought I might provide an alternative solution. I think I understand how you want this volume control to look, but I may be wrong. One of my favorite techniques is to use imaging lingo to create a "one-sprite widget".
With this behavior you need only one bitmap member as a sprite on the stage. However you do need an additional 3 bitmap cast members in the cast (but not on the score). You need an + button, - button and a "volume indicator" (like a rectangle) that will be repeated depending on the current volume. These 3 cast members should all be the same height.
Attach this behavior to a bitmap sprite. It doesnt matter what the bitmap looks like because the script alters the image. There are parameters that will need to be modified, so open the behaviors parameter dialog to do that. I have a simple demo movie I can send you, so send me a private message with your email address if you want it.
-- VOLUME CONTROL ONE SPRITE WIDGET --
property spriteNum, pMe, pNumLevels, pDownButton, pUpButton, pVolumeIndicator, pSpacing, pBitDepth, pCurrentVolume, pStartingVolume
on beginSprite me
pMe = sprite(spriteNum)
pCurrentVolume = pStartingVolume
updateImage(me)
end
on mouseUp me
if the clickLoc[1] - pMe.loc[1] < pDownButton.width then
if pCurrentVolume > 0 then
pCurrentVolume = pCurrentVolume - 1
-- Your code here
updateImage(me)
end if
else if the clickLoc[1] - pMe.loc[1] > pMe.width - pUpButton.width then
if pCurrentVolume < pNumLevels then
pCurrentVolume = pCurrentVolume + 1
-- Your code here
updateImage(me)
end if
end if
end
on getPropertyDescriptionList
description = [:]
addProp description,#pNumLevels, [#default:1, #format:#integer, #comment:"Number of volume levels"]
addProp description,#pDownButton, [#default:member(0), #format:#member, #comment:"Volume down button cast member"]
addProp description,#pUpButton, [#default:member(0), #format:#member, #comment:"Volume up button cast member"]
addProp description,#pVolumeIndicator, [#default:member(0), #format:#member, #comment:"Volume indicator cast member"]
addProp description,#pBitDepth, [#default:24, #format:#integer, #comment:"Bit Depth"]
addProp description,#pSpacing, [#default:1, #format:#integer, #comment:"Spacing"]
addProp description,#pStartingVolume, [#default:0, #format:#integer, #comment:"Starting volume"]
return description
end
on updateImage me
imageWidth = pDownButton.width + pUpButton.width + (pNumLevels * pVolumeIndicator.width) + ((pNumLevels + 1) * pSpacing)
imageHeight = pVolumeIndicator.height
newImage = image(imageWidth, imageHeight, pBitDepth)
newImage.copyPixels(pDownButton.member.image, pDownButton.rect, pDownButton.rect)
repeat with counter = 1 to pNumLevels
if counter <= pCurrentVolume then
x1 = pDownButton.width + (counter * pSpacing) + ((counter - 1) * pVolumeIndicator.width)
y1 = 0
x2 = x1 + pVolumeIndicator.width
y2 = pVolumeIndicator.height
newImage.copyPixels(pVolumeIndicator.member.image, rect(x1,y1,x2,y2) , pVolumeIndicator.rect)
end if
end repeat
newImage.copyPixels(pUpButton.member.image, rect(newImage.width - pUpButton.width, 0, newImage.width, newImage.height), pUpButton.rect)
pMe.member.image = newImage
pMe.width = pMe.member.width
pMe.height = pMe.member.height
pMe.member.regPoint = point(0,0)
end
Similar Messages
-
I need help with a button animation!
Hi,
I hope someone can help with a simple-looking problem which
nonetheless has me stumped!
I have a feeling that I've missed something obvious.
I've created a movie clip to act as a button (I've called it
"abs_button") and placed it on the stage.
My main movie has one frame.
Within the "abs_button" movie clip there are 5 layers.
Labels, actions, default button state, rollover state and rollout
state.
Technically, default button state, rollover state and rollout
state could be on the same layer as they don't overlap, but I've
given each animation its own layer for clarity.
FRAME 01.
Default button state is one frame with a graphic of the
button. Just a label at the start ("abs_up") and a "stop();" action
at the end.
FRAME 02 to 31.
Rollover state is a 30 frame animation. Label at start
("abs_over"), "stop()"; action at the end.
FRAME 32 to 62.
Rollout state is a 30 frame animation. Label at start
("abs_out"), "stop()"; action at the end.
All animations were achieved with tweens.
My initial "abs_button" code:
on (release) {
getURL("targetPage.htm", "_self");
on (rollOver) {
gotoAndPlay("abs_button", "abs_over");
on (rollOut) {
gotoAndPlay("abs_button", "abs_out");
As it stands, the animation jumps to frame 1 of "abs_out" on
rollout.
I need the "abs_over" animation to always play through to the
end, as the "abs_out" is "abs_over" in reverse (i.e. image grows
large on rollover and shrinks again on rollout.
I've tried for 2 days to solve this, but I clearly need help.
My experiments with variables simply didn't work.
I would be grateful if someone could tell me where I'm going
wrong!
Thanks,
Andyuse this:
on (rollOver) {
gotoAndPlay("abs_over");
Since the code is attached directly to the movieclip, you
don't have to
identify the clip. A gotoAndPlay() function takes a frame
number or a
frame label name as its argument, never the name of the clip
that
contains the frame number or name.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412.243.9119 -
Hello
I am very new to Java and am currently studying a course in the language.
I am working through a tutorial at the moment and a question has been asked and I am struggling a bit
I have been given the code to a program that creates a window with a ball bouncing around inside the window.
There are 2 classes (code below) - Call class - this contains all the code need to create the ball and BallWorld Class (the main Class) this create the window and moves the ball, it also detects if the ball hits the edge of the window, whne this happens it redirects the ball. I understand how all this code works
I have been asked the following:-
Rather than testing whether or not the ball has hit the wall in the nmain program, we could use inhertitance to provide a specialized forom of Ball. Create a class BoundedBall that inherits from the class Ball. The constructor for this class should provide the height and width of the window, which should be maintained as data fields in the class, rewrite the move method so that the ball moves outside the bound, it automatically reflects its direction. Finally rewrite the BallWorld class to use an instance of BoundedBall rather than ordianary Ball, and elimiante the bounds test in the main program.
I am having trouble with this and I can not get my code to work, I think I may be going in completly the wrong direction with the code can sombody please provide me with a simple working code for both the BoundedBall and ammended BallWorld class, as this will help me understand whare I am going wrong
Ball class
//a generic round colored object that moves
import java.awt.*;
public class Ball {
public Ball (Point lc, int r) { //constructor for new ball
//ball centre at point loc, radius rad
loc = lc;
rad = r;
protected Point loc; //position in window
protected int rad; //radius of ball
protected double changeInX = 0.0; //horizontal change in ball position in one cycle
protected double changeInY = 0.0; //vertical change in ball position in one cycle
protected Color color = Color.blue; //colour of ball
//methods that set attributes of ball
public void setColor(Color newColor) {color = newColor;}
public void setMotion(double dx,double dy)
{changeInX = dx; changeInY = dy;}
//methods that access attributes of ball
public int radius() {return rad;}
public Point location() {return loc;}
//methods to reverse motion of the ball
public void reflectVert(){ changeInY = -changeInY; }
public void reflectHorz(){ changeInX = -changeInX; }
//methods to move the ball
public void moveTo(int x, int y) {loc.move(x,y);}
public void move(){loc.translate((int)changeInX, (int)changeInY);}
//method to display ball
public void paint (Graphics g) {
g.setColor(color);
g.fillOval(loc.x-rad, loc.y-rad, 2*rad, 2*rad);
BallWorld class
//A bouncing ball animation
import java.awt.*; //import the awt package
import javax.swing.JFrame; //import the JFrame class from the swing package
public class BallWorld extends JFrame{
public static void main (String [] args){
BallWorld world = new BallWorld(Color.red);
world.show();
for(int i = 0; i < 1000; i++) world.run();
System.exit(0);
public static final int FrameWidth = 600;
public static final int FrameHeight = 400;
private Ball aBall = new Ball(new Point (50,50),20);
private BallWorld(Color ballColor) { //constructor for new window
//resize frame, initialize title
setSize(FrameWidth, FrameHeight);
setTitle("Ball World");
//set colour and motion of ball
aBall.setColor(ballColor);
aBall.setMotion(3.0, 6.0);
public void paint (Graphics g) {
//first draw the ball
super.paint(g);
aBall.paint(g);
public void run(){
//move ball slightly
aBall.move();
Point pos =aBall.location();
if ((pos.x < aBall.radius()) ||
(pos.x > FrameWidth - aBall.radius()))
aBall.reflectHorz();
if ((pos.y < aBall.radius()) ||
(pos.y > FrameHeight - aBall.radius()))
aBall.reflectVert();
repaint();
try{
Thread.sleep(50);
} catch(InterruptedException e) {System.exit(0);}Here - you can study this :0))import java.awt.*;
import javax.swing.*;
public class MovingBall extends JFrame {
mapPanel map = new mapPanel();
public MovingBall() {
setBounds(10,10,400,300);
setContentPane(map);
public class mapPanel extends JPanel {
Ball ball = new Ball(this);
public void paintComponent(Graphics g) {
super.paintComponent(g);
ball.paint(g);
public class Ball extends Thread {
mapPanel map;
int x = 200, y = 20, xi = 1, yi = 1;
public Ball(mapPanel m) {
map = m;
start();
public synchronized void run(){
while (true) {
try{
sleep(10);
catch(InterruptedException i){
System.out.print("Interrupted: ");
move();
public void move() {
map.repaint(x-1,y-1,22,22);
if (x > map.getWidth()-20 || x < 0) xi = xi*-1;
if (y > map.getHeight()-20 || y < 0) yi = yi*-1;
x = x + xi;
y = y + yi;
map.repaint(x-1,y-1,22,22);
public void paint(Graphics g) {
Graphics2D g2 = (Graphics2D)g;
g2.setColor(Color.red);
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.fillOval(x,y,20,20);
g2.dispose();
public static void main(String[] args) {
new MovingBall().show();
} -
HELP MAKING VERY SIMPLE ANIMATION - Adobe Flash CS5
- First off, apologies for the simplicity of the task I need to carry out- cannot seem to find any tutorials on this. (All aimed at After Effects)
- I am hoping to make two simple animations;
1. Animate the word "water" so it appears to be moving like water itself.
2. Animate the word "sand" so it appears to crumble into sand itself.
Appreciate any help, very new to Flash - still no luck after Lynda and other tutorials.Not exactly the answer to your question but found a tutorial page that could help you.
Text Effects with Flash Professional 8 « Wonder How To -
Need help with a simple process with FTP Adapter and File Adapter
I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jaypersiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Need help with a simple basketball game.
Hi im new here and I need help with making this simple basketball game.
Im trying to recreate this game from this video. Im not sure if he is using as2 or as3
Or if anyone could help me make a game like this or direct me to a link on how to do it It would be greatly appreciated.If you couldn't tell whether it is AS2 or AS3, it is doubtful you can turn it from AS2 into AS3, at least not until you learn both languages. There is no tool made that does it for you.
-
Need help with a simple program (should be simple anyway)
I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
public void actionPerformed(ActionEvent evt) {
text1.setText(" ");
text2.setText("RE: ");
text3.setText(" ");
public Message() {
super("Write a Message - by Kieran Hannigan");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(370,270);
FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
setLayout(flo);
//Make the bar
JMenuBar bar = new JMenuBar();
//Make "File" on Menu
JMenu File = new JMenu("File");
JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
JMenuItem f2 = new JMenuItem("Open");
JMenuItem f3 = new JMenuItem("Save");
JMenuItem f4 = new JMenuItem("Save As");
JMenuItem f5 = new JMenuItem("Exit");
File.add(f1);
File.add(f2);
File.add(f3);
File.add(f4);
File.add(f5);
bar.add(File);
//Make "Edit" on menu
JMenu Edit = new JMenu("Edit");
JMenuItem e1 = new JMenuItem("Cut");
JMenuItem e2 = new JMenuItem("Paste");
JMenuItem e3 = new JMenuItem("Copy");
JMenuItem e4 = new JMenuItem("Repeat");
JMenuItem e5 = new JMenuItem("Undo");
Edit.add(e5);
Edit.add(e4);
Edit.add(e1);
Edit.add(e3);
Edit.add(e2);
bar.add(Edit);
//Make "View" on menu
JMenu View = new JMenu("View");
JMenuItem v1 = new JMenuItem("Bold");
JMenuItem v2 = new JMenuItem("Italic");
JMenuItem v3 = new JMenuItem("Normal");
JMenuItem v4 = new JMenuItem("Bold-Italic");
View.add(v1);
View.add(v2);
View.add(v3);
View.addSeparator();
View.add(v4);
bar.add(View);
//Make "Help" on menu
JMenu Help = new JMenu("Help");
JMenuItem h1 = new JMenuItem("Help Online");
JMenuItem h2 = new JMenuItem("E-mail Programmer");
Help.add(h1);
Help.add(h2);
bar.add(Help);
setJMenuBar(bar);
//Make Contents of window.
//Make "Subject" text field
JPanel row2 = new JPanel();
JLabel sublabel = new JLabel("Subject:");
row2.add(sublabel);
JTextField text2 = new JTextField("RE:",24);
row2.add(text2);
//Make "To" text field
JPanel row1 = new JPanel();
JLabel tolabel = new JLabel("To:");
row1.add(tolabel);
JTextField text1 = new JTextField(24);
row1.add(text1);
//Make "Message" text area
JPanel row3 = new JPanel();
JLabel Meslabel = new JLabel("Message:");
row3.add(Meslabel);
JTextArea text3 = new JTextArea(6,22);
messagearea.setLineWrap(true);
messagearea.setWrapStyleWord(true);
JScrollPane scroll = new JScrollPane(text3,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
//SpaceLine
JPanel spaceline = new JPanel();
JLabel spacer = new JLabel(" ");
spaceline.add(spacer);
row3.add(scroll);
add(row1);
add(row2);
add(spaceline);
add(spaceline);
add(row3);
setVisible(true);
public static void main(String[] arguments) {
Message Message = new Message();
}persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]. -
Help with a simple program.
I need some help writing a simple program. Can anybody help??
thanks to all.
2. HTML Java Source Code Reserved Word Highlighter
Write a program that inputs a Java source code file and outputs a copy of that file with Java keywords surrounded with HTML tags for bold type. For example this input:
public class JavaSource
public static void main ( String[] args )
if ( args.length == 3 )
new BigObject();
else
System.out.println("Too few arguments.");
will be transformed into:
<B>public</B> <B>class</B> JavaSource
<B>public</B> <B>static</B> <B>void</B> main ( String[] args )
<B>if</B> ( args.length == 3 )
<B>new</B> BigObject();
<B>else</B>
System.out.println("Too few arguments.");
In a browser the code will look like this:
public class JavaSource
public static void main ( String[] args )
if ( args.length == 3 )
new BigObject();
else
System.out.println("Too few arguments.");Here is something that may get you started...
import java.io.*;
import java.util.*;
public class HtmlJava{
public static void main(String arg[]){
if(arg.length!=1){
System.out.println("Usage java HtmlJava sourceFile");
else
new HtmlJava(arg[0]);
HtmlJava(String source){
try{
BufferedReader sourceReader=new BufferedReader(new InputStreamReader(new FileInputStream(source)));
BufferedWriter writer=new BufferedWriter(new OutputStreamWriter(new FileOutputStream(source+"Html.txt")));
Vector keywords=new Vector();
addKeywords(keywords);
String line;
StringTokenizer tokenizer=null;
String word;
while((line=sourceReader.readLine () )!=null){
tokenizer=new StringTokenizer(line);
while(tokenizer.hasMoreTokens()){
word=tokenizer.nextToken();
if(keywords.contains(word)){
writer.write(""+word+" ");
else{
writer.write(word+" ");
writer.write("\r\n");
writer.close();
sourceReader.close();
System.out.println("Output File written to "+source+"Html.txt");
catch(Exception ex){
ex.printStackTrace();
private void addKeywords(Vector keywords){
keywords.addElement ( "abstract");
keywords.addElement( "boolean");
keywords.addElement( "break");
keywords.addElement( "byte");
keywords.addElement( "byvalue");
keywords.addElement( "case");
keywords.addElement( "cast");
keywords.addElement( "catch");
keywords.addElement( "char");
keywords.addElement( "class");
keywords.addElement( "const");
keywords.addElement( "continue");
keywords.addElement( "default");
keywords.addElement( "do");
keywords.addElement( "double");
keywords.addElement( "else");
keywords.addElement( "extends");
keywords.addElement( "false");
keywords.addElement( "final");
keywords.addElement( "finally");
keywords.addElement( "float");
keywords.addElement( "for");
keywords.addElement( "future");
keywords.addElement( "generic");
keywords.addElement( "goto");
keywords.addElement( "if");
keywords.addElement( "implements");
keywords.addElement( "import");
keywords.addElement( "inner");
keywords.addElement( "instanceof");
keywords.addElement( "int");
keywords.addElement( "interface");
keywords.addElement( "long");
keywords.addElement( "native");
keywords.addElement( "new");
keywords.addElement( "null");
keywords.addElement( "operator");
keywords.addElement( "outer");
keywords.addElement( "package");
keywords.addElement( "private");
keywords.addElement( "protected");
keywords.addElement( "public");
keywords.addElement( "rest");
keywords.addElement( "return");
keywords.addElement( "short");
keywords.addElement( "static");
keywords.addElement( "super");
keywords.addElement( "switch");
keywords.addElement( "synchronized");
keywords.addElement( "this");
keywords.addElement( "throw");
keywords.addElement( "throws");
keywords.addElement( "transient");
keywords.addElement( "true");
keywords.addElement( "try");
keywords.addElement( "var");
keywords.addElement( "void");
keywords.addElement( "volatile");
keywords.addElement( "while");
}Hope it helped -
Help with a simple 1811 configuration
I have a very basic level of understanding with Cisco products and I need help with what should be simple and even doable by me.
I have a Cisco 1811 integrated router and am simply trying to use it on my home network. I can configure the router with an enable secret password, password encryption, VTY, aux, and cons logins with no issues. The router has 2 Ethernet interfaces, 0 and 1 and 8 switch ports.
The idea is to bring Comcast ISP service into one of the Ethernet ports and then have three machines on the switch ports able to access the Internet. Also I have an off-the shelf wireless router that I thought I would just plug that into an available switch port and allow a wireless AP as well.
This is so simply, that I can't believe I can't figure it out, but I can't.
I set int F1 to DHCP, performed a 'no shut', and connected the ISP's router and have an up and up indication. I have setup a static network with my three machines on the switch ports and enabled all applicable ports and have up and up indications - however, no traffic flow, even amongst my static Layer 2 switched LAN - not even a 'ping'. By my understanding of Layer 2, this should work right now, whether the ISP service is working or not - WHAT AM I DOING WRONG?
The addressing scheme I have ended up on is 172.16.1.0/28
Obviously without the first hurdle cleared, of why the switched LAN doesn’t work, I haven't got any deeper. Do I need to configure NAT? I don't think I would need to in the scenario right?
All of my experience, and none at the CCNA level, has been with larger Cisco equipment. One thing I noticed on the 1811 was that when trying to create a new VLAN, it appears to work yet does not do anything and the 'sh vlans' output returns nothing, not even the VLAN1 I can see with 'sh ip int brief".
Anyway, if anyone has time to help a newbie out I would appreciate it; I’m lost.
Thanks,
JoshThanks for the help Andrew! You know, I think if this was two separate devices (switch and router) I think I would be up and running, but this integrated stuff is throwing me off, not to mention that the IOS is a much older version (I guess) than what I'm used to.
They were throwing this 1811 in the trash can at work, so I just emptied the trash can. I have no documentation at all but I have since found the 1800 series documentation on Cisco.com and have tried to implement the basic configurations cited; with what seems like success, but still no joy. I did have to recover the password and did so with 0x2142, I bypassed the setup and compared the default configuration with what is listed in the documentation and they DO NOT match; I also tried to go through setup mode with the same indications. Additionally I've also learned that the 1800 series is pre-configured on certain options (DHCP, VLAN), which is new to me - I thought Cisco routers were not configured by default - isn't that kind of the point? (By the way, the below port status may not be correct since I now have all the ports unplugged)
Anyway, here is the 'show run' command, the 'sh ip int brief' command, followed by the 'sh version' command:
Show Run
Casino#sh run
Building configuration...
Current configuration : 2006 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Casino
boot-start-marker
boot-end-marker
enable secret 5 $1$meWw$nsMTp6US7axi/uE0MWULK.
enable password 7 06535E741C1B584C55
no aaa new-model
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 172.16.1.1
ip dhcp pool Casino
import all
network 172.16.1.0 255.255.255.240
default-router 67.165.208.1
dns-server 68.87.89.150
domain-name hsd1.co.comcast.net
no ip domain lookup
ip domain name GinRummy.localhost
ip name-server 68.87.85.102
ip name-server 68.87.69.150
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
multilink bundle-name authenticated
archive
log config
hidekeys
interface Loopback0
ip address 172.16.1.1 255.255.255.240
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet1
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Vlan1
no ip address
ip nat inside
ip virtual-reassembly
interface Dialer0
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer pool 1
ppp authentication chap
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat pool Casino 172.16.1.2 172.16.1.14 netmask 255.255.255.240
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit 172.16.1.0 0.0.0.15
dialer-list 1 protocol ip permit
control-plane
line con 0
password 7 080E5916584B4442435E5C
login
line aux 0
password 7 013C135C0A59475A70191E
login
line vty 0 4
password 7 09635B51485756475A5954
login
end
Show IP Interface Brief
Casino#sh ip int brief
Interface IP-Address OK? Method Status Prl
FastEthernet0 unassigned YES NVRAM administratively down do
FastEthernet1 unassigned YES DHCP up do
BRI0 unassigned YES NVRAM administratively down do
BRI0:1 unassigned YES unset administratively down do
BRI0:2 unassigned YES unset administratively down do
FastEthernet2 unassigned YES unset up do
FastEthernet3 unassigned YES unset up do
FastEthernet4 unassigned YES unset up do
FastEthernet5 unassigned YES unset up do
FastEthernet6 unassigned YES unset up do
FastEthernet7 unassigned YES unset up do
FastEthernet8 unassigned YES unset up do
FastEthernet9 unassigned YES unset up up
Vlan1 unassigned YES NVRAM up up
Loopback0 172.16.1.1 YES manual up up
Dialer0 unassigned YES manual up up
NVI0
'show version'
Casino#sh ver
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15))
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jan-08 13:05 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YH12, RELEASE SOFTWARE (fc1)
Casino uptime is 52 minutes
System returned to ROM by reload at 17:09:25 UTC Fri Jul 1 2011
System image file is "flash:c181x-advipservicesk9-mz.124-15.T3.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1812 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of m.
Processor board ID FHK120622J3, with hardware revision 0000
10 FastEthernet interfaces
1 ISDN Basic Rate interface
31488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Thanks again for your help,
Josh -
Need help with publishing as animated .gif
I'm having trouble publishing my project as an animated .gif. My project, which consists of two different animated movie clips, plays just fine when test it (Shift + Enter). But, when I go to publish it, the animations don't show up. The settings are exactly the same as with my other animated .gifs.
Any suggestions???
Thanks!If you try to 'publish' as an app, and you use the words ebook or just book, the review teams are likely to reject and tell you to do a book instead, so be prepared to not call it any type of book and to deliver something that showcases the device and iOS as best as you can if you take that route...it's non-trivial, mostly, so be prepared to learn any skills you may not have yet need going in.
Look at the book 'Yellow Submarine' for what I consider a good example of a standard epub w/m'media. it can be done, but as noted, iBA is iPad only, so....good luck. -
Can someone help with this simple application
I am taking my first java class and there are limited resourses for the class as far as getting help with coding.
Any hoo if any one can point me in the correct direction from the following information listed below I would be greatfull. I am trying to use the set and get methods on the instance veriables and then I am goign to post the results once I get them workign to a JOption pane window.
examples are most welcome thanks
// Invoice.java
// Homework assignment 3.13
// Student Arthur Clark
public class Invoice // public class
String partNumber;// instance veriable quantity
String partDescription;// instance verialbe partDescription
//constructors
public void setpartNumber( String number, String description )
partNumber = number; //initalize quantity
partDescription = description; // initalize partDescription
}// end constructors
//method getpartNumber
public String getpartNumber()
return partNumber;
}//end method getpartNumber
public String getpartDescription()
return partDescription;
}// end method getpartDescription
public void displayMessage()
//this is the statement that calls getpartNumber
System.out.printf(" part number # \n%s!\n the description", getpartNumber(), getpartDescription() );
} // method displaMessage
}// end method main
// Fig. 3.14 InvoiceTest.java
// Careate and manipulate an account object
import java.util.Scanner;
import javax.swing.JOptionPane;//import JOptionPane
public class InvoiceTest{
// main method begins the exciution of the program
public static void main ( String args [] )
// create Scanner to obtain input from mommand window
Scanner input = new Scanner ( System.in );
// create a Invoice object and assig it to mymethod
Invoice myMethod = new Invoice();
Invoice myMethod2 = new Invoice();
// display inital value of partName, partDescriptoin
System.out.printf( "inital partname is %s\n\n", myMethod.getpartNumber() );
// prompt for and read part name, partDescription
System.out.println( "please enter the Part Number:" );
String theNumber = input.nextLine(); // read a line of text
myMethod.setpartNumber( theNumber ); // set the part name with in the parens
System.out.println();// outputs blank line
myMethod.displayMessage();
System.out.println( "please enter the Part Description" );
String theDescription = input.nextLine(); // read a line of text
myMethod2.setpartDescription( theDescription );// set the part description
System.out.println();// outputs blank line
myMethod2.displayMessage();
}// end main mehtod
}// end class//constructors
public void setpartNumber( String number, String description )
partNumber = number; //initalize quantity
partDescription = description; // initalize partDescription
}// end constructorsThe above code is not a constructor. You do not include a return type, void or anything else. Also, the constructor should be called the same as your class.
public Invoice( String number, String description )
partNumber = number;
partDescription = description;
} Another thing, comments should only be used when it isn't bleedingly obvious what your code is doing.
P.S. is your middle initial C? -
Im DROWNING! need help with a simple java assignment! plz someone help me!
i need help with my java assignment, with validating a sin number. easy for must who know java. im drowning... please help!
You will need to store each digit of the social insurance number in a field of its own. To validate the entry you will:
1. Multiply the 2nd, 4th, 6th and 8th digit by 2.
2. If the product of any of the four multiplications result in a value greater than 9, add the two resulting digits together to yield a single-digit response. For example 6 * 2 = 12, so you would add the 1 and the 2 to get a result of 3.
3. Add these four calculated values together, along with the 1st, 3rd, 5th, and 7th digits of the original number.
4. Subtract this sum from the next highest multiple of 10.
5. The difference should be equal to the 9th digit, which is considered the check digit.
Example of validating S.I.N. 765932546
1st digit 7
2nd digit (6*2 =12 1+2=) 3
3rd digit 5
4th digit (9*2 = 18 1+8 =) 9
5th digit 3
6th digit (2*2 = 4) 4
7th digit 5
8th digit (4*2 = 8) 8
Total 44 next multiple of 10 is 50
50-44 = 6 which is the 9th digit
Therefore the S.I.N. 765932546 is Valid
********* SIN Validation *********
Welcome - Please enter the first number: 120406780
Second digit value multiplied by 2 4
Fourth digit value multiplied by 2 8
Sixth digit value multiplied by 2 12
Eighth digit value multiplied by 2 16
Value derived from 6th digit 3
Value derived from 8th digit 7
The total is 30
Calculated digit is 10
Check digit must be zero because calculated value is 10
The SIN 120406780 is Valid
this is my assignemtn this is what i have! i dont know where to start! please help me!
/* File: sinnumber.java
Author: Ashley
Date: October 2006
Purpose: Lab1
import java.util.Scanner;
public class Lab1
public static void main(String[] args)
Scanner input = new Scanner(System.in);
int sin = 0;
int number0, number1, number2, number3, number4, number5, number6, number7, number8;
int count = 0;
int second, fourth, sixth, eighth;
System.out.print("\t\n**********************************");
System.out.print("\t\n**********SIN Validation**********");
System.out.print("\t\n**********************************");
System.out.println("\t\nPlease enter the First sin number: ");
sin = input.nextInt();
count = int.length(sin);
if (count > 8 || count < 8)
System.out.print("Valid: ");
} -
Can anyone help with a simple coding problem?
I'm creating a website using Dreamweaver MX 2004 and making a
real mess of it!
I have created two pages which are identical in terms of
background, but one has a text box in the middle. What I want to
happen when you click the link to this page is the first one
without the text box appears for a couple of seconds, then the
other page automatically loads to give the impression that this
text box has magically appeared. really simple, but I can't find
any behaviour codes to make this happen!
Can anyone help me out with a code or give me a clue to how
it can be achieved really easily.
Cheers everyone!You can try just using the same page and hiding and showing
the layer using the Behaviors menu. that would acheive the same
thing without having to load another page. -
Help with removing minor animation?
hello can smeone please help me remove this minr animation from this flash file. the animation i would like to remove is the one dat appears in the start and gives it the effec of moving the menu from left to rite. i have gone thoguh the all the movie clips and cant figure it out. im new with flash. fyi, i got this template from a site. i was able to remove lots of stuff but i cant get ridof the effect from left to right. if someoen can help me it will be greatly appreciated. also if u can explain it will be great. i wanna learn flash
how do i add the file? grrrrrrrrr i need some help.
-
Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence
Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Maybe you are looking for
-
How Can I limit the bandwith of my internet connection on linux?
Hello, I have 2 Pc's, one for my brother, and the other for me. And well, always we have problems about downloads and lags when we are playing. For example, when I download packages from pacman, it is done at maximum speed "eating" all connection, an
-
Help! ipod nano won't hold as many songs as it says it can
I have an ipod nano that is 2GB and can hold up to 500 songs. I only have 113 songs on it and when i try to put more on it it says that there is not enough room to put more songs on it. How do i make it able to hold more songs???? Toshiba Windows X
-
Prompting username and password
Dear All, after I have install new SharePoint 2013 server, I was able to create new web application and new site collection under that without any problems. But I cant access newly created site collection. it's keep prompting username and password.
-
No Flash Video Playback on Internet
Flash Page with embedded video --- I can't figure out why the page plays locally just fine, but once it has been uploaded to a server, you only get the page and the controls - never the video. So, what is the secret? If you actually see the video, le
-
Date Range Selection in Query Templates
Hi, Can someone please tell me how to use <b>Date Range Selection</b> Tab details in SQL Query and TAG Query (Using Examples). Thanks in advance Muzammil P.T