Help with access manager

Hi All,
I am completely new to the access manager. I need your help.
I have sun-one app server and access manager installed successfully, all I want to do is just access the access manager from the a simple JSP page and authenticate the user.
Any sample code, tutorials for the initial configuration and run this sample would be greatly appreciated.
Thanks,
Bob

Hi
As you have successfully login into the access manager
can you help me in doing the same thing as after installing Access manager in linux in realm mode its not accessible through
http://localhost:80/amserver
Thanks in advance
Madhvi
[email protected]

Similar Messages

Too Slow - Domino 6.5.4 with access manager agent 2.2 ?

I don't know how to tune Domino 6.5.4 with access manager agent 2.2?
I think AMAgent.properties is not good for SSO.
Please help me to tune it.
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# Copyright ? 2002 Sun Microsystems, Inc. All rights reserved.
# U.S. Government Rights - Commercial software. Government users are
# subject to the Sun Microsystems, Inc. standard license agreement and
# applicable provisions of the FAR and its supplements. Use is subject to
# license terms. Sun, Sun Microsystems, the Sun logo and Sun ONE are
# trademarks or registered trademarks of Sun Microsystems, Inc. in the
# U.S. and other countries.
# Copyright ? 2002 Sun Microsystems, Inc. Tous droits r閟erv閟.
# Droits du gouvernement am閞icain, utlisateurs gouvernmentaux - logiciel
# commercial. Les utilisateurs gouvernmentaux sont soumis au contrat de
# licence standard de Sun Microsystems, Inc., ainsi qu aux dispositions en
# vigueur de la FAR [ (Federal Acquisition Regulations) et des suppl閙ents
# ? celles-ci.
# Distribu? par des licences qui en restreignent l'utilisation. Sun, Sun
# Microsystems, le logo Sun et Sun ONE sont des marques de fabrique ou des
# marques d閜os閑s de Sun Microsystems, Inc. aux Etats-Unis et dans
# d'autres pays.
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://sportal.yjy.dqyt.petrochina:80/amserver/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://sportal.yjy.dqyt.petrochina:80/amserver/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.Dominoad.yjy.dqyt.petrochina.80
# Set the logging level for the specified logging categories.
# The format of the values is
#     <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
#     0     Disable logging from specified module*
#     1     Log error messages
#     2     Log warning and error messages
#     3     Log info, warning, and error messages
#     4     Log debug, info, warning, and error messages
#     5     Like level 4, but with even more debugging messages
# 128     log url access to log file on AM server.
# 256     log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level =
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = LYnKyOIgdWt404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = c:/Sun/Access_Manager/Agents/2.2/domino/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://Dominoad.yjy.dqyt.petrochina:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-
number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://Dominoad.yjy.dqyt.petrochina:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = Dominoad.yjy.dqyt.petrochina
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = http://dominoad.yjy.dqyt.petrochina/*.nsf http://dominoad.yjy.dqyt.petrochina/teamroom.nsf/TROutline.gif?
OpenImageResource http://dominoad.yjy.dqyt.petrochina/icons/*.gif
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
#http://sportal.yjy.dqyt.petrochina/amserver/UI/Logout
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = false
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAuthFilter

Hi,
I installed opensso (so Sun Java(TM) System Access Manager 7.5) and the agent for Domino 6.5.4 and I have the message in logs "amAgent"
2007-07-11 18:40:16.119 Error 1708:3dbcf768 PolicyAgent: render_response(): Entered.
I have the box to identify but it doesnot connect me on my opensso server.
It still identify with Domino's server
Thanks for your response
Thomas

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

Integrate other directory servers with access manager

How to integrate other directory servers with access manager ?

Please read the Access Manager admin guide at http://docs.sun.com/app/docs/doc/819-4670/6n6qardvq
Any further questions regarding this integration, post them to the AM forum at http://forums.sun.com/forum.jspa?forumID=770

Need help with accessing the program.

I need help with accessing my adobe creative cloud on my windows 8.1 laptop. I have an account but do not have an app. I need this for my online classes. Please help!

Link for Download & Install & Setup & Activation may help
-Chat http://www.adobe.com/support/download-install/supportinfo/

Urgent help requested: Access Manager integration with BEA Portal

We're using Access Manager 7.1 and Policy Agent 2.2 to authenticate users for our BEA WL Portal 10 which contains all of our content and applications. The portal contains both anonymous pages and protected pages (for registered users).
Problem: When an anonymous user who is going through a multi-step application flow decides to sign-in to their account (or sign-up) Policy Agent wipes out the current content of the user session, and creates a brand new user session after the user is authenticated. Therefore we cannot send the user back to the same spot in the portal where they were before signing-in.
Is there anyway to make Policy Agent preserve the content and state of http session when authenticating a user?
We have a business requirement to allow users to continue their application process after successfully signing in.
Thanks in advance.

Hi,
I think this problem is not just related to weblogic 10 agent, it is a general problem for any agents.
Can you please clarify what you mean by "anonymous user "? Do you mean that this user has never logged in to Access Manager, and is just browsing the site as an anonymous user, or do you have a role specified as "anonymous user " that they are currently logged into when browsing the site?
thx,
Sean

Load Balancing Directory Servers with Access Manager - Simple questions

Hi.
We are in the process of configuring 2 Access Manager instances (servers) accessing the same logical LDAP repository (comprising physically of two Directory Servers working together with Multi-Master Replication configured and tested) For doing this, we are following guide number 819-6258.
The guide uses BigIP load balancer for load balancing the directory servers. However, we intend to use Directory Proxy Server. Since we faced some (unresolved) issues last time that we used DPS, there are some simple questions that I would be very grateful to have answers to:
1. The guide, in section 3.2.10 (To configure Access Manager 1 with the Directory Server load balancer), talks about making changes at 4 places, and replacing the existing entry (hostname and port) with the load balancer's hostname and port (assuming that the load balancer has already been configured). It says that changes need not be made on Access Manager 2 since the LDAPs are in replication, and hence changes will be replicated at all places. However, the guide also states that changes have to be made in two files, namely AMConfig.properties, and the serverconfig.xml file. But these changes will not be reflected on Access Manager 2, since these files are local on each machine.
Question 1. Do changes have to be made in AMConfig.properties and serverconfig.xml files on the other machine hosting Access Manager 2?
Question 2: What is the purpose of putting these values here? Specifically, what is achieved by specifying the Directory server host and port in AMConfig.properties, as well as in serverconfig.xml?
Question 3. In the HTTP console, there is the option of specifying multiple primary LDAP servers, as well as multiple secondary LDAP servers. What is the purpose of these? Are secondary servers attempted when none of the list in the primary list are accessible? Also, if there are multiple entries in the primary server list, are they accessed in a round robin fashion (hereby providing rudimentary load balancing), or are other servers accessed only when the one mentioned first is not reachable etc.?
2. Since I do not have a load balancer setup yet, I tried the following deviation to the above, which, according to me, should have worked. If viewed in the HTTP console, LDAP / Membership / MSISDN and Policy configuration all pointed to the DS on host 1. When I changed all these to point to the directory server on host 2 (and made AMConfig.properties and serverconfig.xml on host 1 point to DS of host 2 as well), things should have worked fine, but apparently Access manager 1 could not be started. Error from Webserver:
[14/Aug/2006:04:30:36] info (13937): WEB0100: Loading web module in virtual server [https-machine_1_FQDN] at [search]
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: Exception in thread "EventService" java.lang.ExceptionInInitializerError
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at com.iplanet.services.ldap.event.EventServicePolling.run(EventServicePolling.java:132)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at java.lang.Thread.run(Thread.java:595)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: Caused by: java.lang.InterruptedException
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: at com.sun.identity.sm.ServiceManager.<clinit>(ServiceManager.java:74)
[14/Aug/2006:04:31:48] warning (13937): CORE3283: stderr: ... 2 more
In effect, AM on 1 did not start. On rolling back the changes, things again worked like previously.
Will be really grateful for any help / insight / experience on dealing with the above.
Thanks!

Update to the above, incase anyone is reading:
We setup a similar setup in Windows, and it worked. Here is a detailed account of what was done:
1. Host 1: Start installer, install automatically, chose Directory server, Directory Administration server, Directory Proxy server, Web server, Access Manager.
All installed, and worked fine. (AMConfig.properties, serverconfig.xml, and the info in LDAP service, all pointed to HOST1:389)
2. Host 2: Start installer, install automatically, chose Directory server, Directory Administration server, Directory Proxy server, Web server, Access Manager.
All installed, and worked fine. (AMConfig.properties, serverconfig.xml, and the info in LDAP service, all pointed to HOST2:389)
3. Host 1: Started replication. Set to Master
4. Host 2: Started replication. Set to Master
5. Host 1: Setup replication agreement to Host 2
6. Host 2: Setup replication agreement to Host 1
7. Initiated the remote replica from Host 1 ----> Host 2
Note that since default installation uses abc.....xyz as the encryption key, setting this to same was not an issue.
9. Started webserver for Host 1 and logged into AM as amadmin.
10. Added Host 2 FQDN in DNS Aliases / Realms
11. Added http://HOST2_FQDN:80 in the Platform server (instance) list.
12. Started Host 2 webserver. Logged in AM on Host 2, things worked fine.
At this stage, note the following:
a) Host 1:
AMConfig.properties file has
com.iplanet.am.directory.host=host1_FQDN
and
com.iplanet.am.directory.port=389
serverconfig.xml has:
<Server name="Server1" host="host1_FQDN" port="389" type="SIMPLE" />
b) Host 2:
AMConfig.properties file has
com.iplanet.am.directory.host=host2_FQDN
and
com.iplanet.am.directory.port=389
serverconfig.xml has:
<Server name="Server1" host="host2_FQDN" port="389" type="SIMPLE" />
c) If one logs into AM, and checks LDAP servers for LDAP / Policy Configuration / Membership etc services, they all contain Host2_FQDN:389 (which makes sense, since replica 2 was initialized from 1)
Returning back to the configuations:
13. On Host 1, login into the Admin server console of the Directory server. Navigate to the DPS, and confgure the following:
a) Network Group
b) LDAP servers
c) Load Balancing
d) Change Group
e) Action on-bind
f) Allow all actions (permit modification / deletion etc.).
g) any other configuations required - Am willing to give detailed steps if someone needs them to help me / themselves! :)
So now, we have DPS configured and running on Host1:489, and distributing load to DS1 and DS2 on a 50:50 basis.
14. Now, log into AM on Host 1, and instead of Host1_fqdn:389 (for DS) in the following places, specify Host1_fqdn:489 (for the DPS)--
LDAP Authentication
MSISDN server
Membership Service
Policy configuation.
Verified that this propagated to the Policy Configuration service and the LDAP authentication service that are already registered with the default organization.
15. Log out of AM. Following the documentation, modify directory.host and directory.port in AMConfig.properties to point to Host 1_FQDN and 489 respectively. Make this change in AMConfig.properties of both Host 1 as well as 2.
16. Edit serverconfig.xml on both hosts, and instead of they pointing to their local directory servers, point both to host1_FQDN:489
17. When you start the webserver, it will refuse to start. Will spew errors such as:
[https-host1_FQDN]: Sun ONE Web Server 6.1SP5 B06/23/2005 17:36
[https-host1_FQDN]: info: CORE3016: daemon is running as super-user
[https-host1_FQDN]: info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_04] from [Sun Microsystems Inc.]
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amserver]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [ampassword]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amcommon]
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [amconsole]
[https-host1_FQDN]: warning: WEB6100: locale-charset-info is deprecated, please use parameter-encoding
[https-host1_FQDN]: info: WEB0100: Loading web module in virtual server [https-host1_FQDN] at [search]
[https-host1_FQDN]: warning: CORE3283: stderr: netscape.ldap.LDAPException: error result (32); matchedDN = dc=sun,dc=com; No such object (DN changed)
[https-host1_FQDN]: warning: CORE3283: stderr: Got LDAPServiceException code=-1
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getConnection(DSConfigMgr.java:357)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewFailoverConnection(DSConfigMgr.java:314)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewConnection(DSConfigMgr.java:253)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewProxyConnection(DSConfigMgr.java:184)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.services.ldap.DSConfigMgr.getNewProxyConnection(DSConfigMgr.java:194)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.initLdapPool(DataLayer.java:1248)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.(DataLayer.java:190)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:215)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ums.DataLayer.getInstance(DataLayer.java:246)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ldap.SMSLdapObject.initialize(SMSLdapObject.java:156)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ldap.SMSLdapObject.(SMSLdapObject.java:124)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[https-host1_FQDN]: warning: CORE3283: stderr: at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.Class.newInstance0(Class.java:350)
[https-host1_FQDN]: warning: CORE3283: stderr: at java.lang.Class.newInstance(Class.java:303)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.SMSEntry.(SMSEntry.java:216)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.identity.sm.ServiceSchemaManager.(ServiceSchemaManager.java:67)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.am.util.AMClientDetector.getServiceSchemaManager(AMClientDetector.java:219)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.am.util.AMClientDetector.(AMClientDetector.java:94)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.sun.mobile.filter.AMLController.init(AMLController.java:85)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:262)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:322)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ApplicationFilterConfig.(ApplicationFilterConfig.java:120)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3271)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3747)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: warning: CORE3283: stderr: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: warning: CORE3283: stderr: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]: failure: WebModule[amserver]: WEB2783: Servlet /amserver threw load() exception
[https-host1_FQDN]: javax.servlet.ServletException: WEB2778: Servlet.init() for servlet LoginLogoutMapping threw exception
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:949)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
[https-host1_FQDN]: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]: ----- Root Cause -----
[https-host1_FQDN]: java.lang.NullPointerException
[https-host1_FQDN]: at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
[https-host1_FQDN]: at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
[https-host1_FQDN]: at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
[https-host1_FQDN]: at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
[https-host1_FQDN]: at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
[https-host1_FQDN]: at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
[https-host1_FQDN]: at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
[https-host1_FQDN]: at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
[https-host1_FQDN]: at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
[https-host1_FQDN]:
[https-host1_FQDN]: info: HTTP3072: [LS ls1] http://host1_FQDN:58080 [i]ready to accept requests
[https-host1_FQDN]: startup: server started successfully
Success!
The server https-host1_FQDN has started up.
The server infact, didn't start up (nothing even listening on 58080).
However, if AMConfig.properties is left as it originally was, and only serverconfig.xml files were changed as mentioned above, web servers started fine, and things worked all okay. (Alright, except for some glitches when viewed in /amconsole. If /amserver/console is accessed, all is good. Can this mean that all is still not well? I am not sure).
So far so good. Now comes the sad part. When the same is done on Solaris 9, things dont work. You continue to get the above error, OR the following error, and the web server will refuse to start:
Differences in Solaris and Windows are as follows:
1. Windows hosts have 1 IP and hostname. Solaris hosts have 3 IPs and hostnames (for DS, DPS, and webserver).
No other difference from an architectural perspective.
Any help / insight on why the above is not working (and why the hell does the documentation seem so sketchy / insecure / incorrect).
Thanks a bunch!

Problem with Access Manager intergration

Hi,
I'm integrating Identity Manager and Access Manager.
I've configured the End User interface to use Access Manager for authentication, and I have (as far as I can tell) everything else set up and working correctly. When I access the end user pages I get the following error:
Access Manager (Sun Access Manager Realm):Successfully authenticated '00000001' on resource 'Access Manager' and found a Lighthouse user with the same accountId, but no matching resource accountIdI've checked and confirmed that there is an attribute being passed in the header
'sois_user = 00000001'
And I have the following defined:
      <Attribute name='common resources'>
        <Object>
          <Attribute name='AM Resources'>
            <List>
              <String>Enterprise Directory</String>
              <String>Access Manager</String>
            </List>
          </Attribute>
        </Object>
      </Attribute>I suspect that it is the common resources that is failing, because its looking for an accountId that matches the DN of the account in LDAP rather than the LogonID. Can anyone provide pointers on how to resolve this?
All suggestions gladly received,
R

Michael,
Thanks for your help, I understand your answer. However, I am using the Access Manager realm adapter which the docs say can't manage users, so no account is being exposed there.
I have found the solution though and it involves a couple of steps:
Firstly, the sois_user value that is passed by the header has to be the DN of the LDAP account.
Secondly, I think the order of the accounts in the 'common resources' definition needs to have the LDAP resource defined first.
Finally, the Login group needs to have both the Access Manager and LDAP login modules.
With these 3 components in place, SSO to IdM works.
R

Cognos & Documentum Integration with Access Manager

Hi
We are trying to implementation a solution around Cognos & Documentum(6) using Sun Access Manager.
Does anyone has implementation such solution or has any suggestion .
Please help..
Thanks

Hi Mohit,
We are implementing a project with Cognos and Documentum. I see that you are one of the very few people who has done that....It would be of great help if you could tell me how to connect Cognos with Documentum data source..
I have to pull the data from Documentum docbase into Cognos and then I have to create a model on top of it for reporting... I dont see any docmentation about it on the net.....any suggestions and links are welcome.
Thanks in advance.
-Sony

Need help with color management

I am looking for someone to help me. Please!
I am looking for help with Photoshop/printer not printing correct colors.
I have: Windows 7, Photoshop CS5, Photoshop Elements, HP Pavillion Laptop, new Okidata C530dn color laser printer
Previously I had a Canon Pixma MP620 and a gentleman from another forum gave me the correct settings for printing on photo paper and colors were perfect. I now have a OKIdata C530dn color laser and have started a business printing business cards and greeting cards, etc., and I do advertisements on a freelance basis.
I will be working a lot with cardstock or cover stock 65-110 lbs paper. I have an old OKIdata 2024e at work, and the colors are much better with that printer than my new personal one. I have tried matching the settings of that printer to mine to no avail. I have finally gotten the color close, but not quite. When I print on my Canon injet the colors match and print perfectly.
I have tried every setting variation that I can think of to get the color correct with my new OKIdata. I have to get the colors correct or my new business will go under because I can't match colors for my customers. I am a self taught Photoshoper and a novice so please bear with me.
Using Okidata PCL. Also have PS
Color settings in Photoshop:
North America General Purpose 2
sRGB 2.1
U.S. Web Coated Swop v2
Dot gain 20 %
Dot gain 20 %
Preserve embeded profile
Preserve embeded profile
Preserve embeded profile
engine: Adobe (ACE)
Relative Colormetric
Tried RGB color mode and CMYK color mode, no difference
Printer settings:
Photoshop manages colors
sRGB 2.1 Printer profile
Relative Colormetric
Print setup:
Letter
Multipurpose tray
Weight: printer settings-default (when I used heavy setting for cardstock it printed green instead of the color light blue, so that was a start to the right color)
Job Options:
Hight Quality
Color: No color matching
Printer preferences in Printer properties:
Color management
Device: Display 1 generic PnP monitor AMD M88og with ATI Mobility Radeon HD4200
ICC Profiles: Generic PnP Monitor (default)
Advanced:
Windows Color System Defaults:
everything under this tab is set at System Default
I have gotten the color close, but colors are dull. I have tried an adjustment layer and setting the saturation higher, but that doesn't help. I know my laptop is showing the right colors, (calibrated) because I am still printing to the Canon with cardstock and the colors are perfect using the same settings above.
Tried printing in PSE and it gave me an error that it was not a post script printer. Installed ps driver, still getting errors and it wouldn't print.
I would appreciate any help you could give me before I run out of toner and have to buy the expensive toners, or just slit my wrists j/k LOL
Thanks! JS

You need an ICC profile for your printer. Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you. You download some software they provide, then print a test file on the exact same paper you are using for your cards. Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file. Once you have it, you'll be able to print accurate colors.
There are other services out there that may cost less, but I do not know how reputable they are. Chromix is a good business I've worked with many times.
If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble. Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

Help with Project Management setup from very basics...

hi all!
i am new to e-business suite and now i have installed vision demo database successfully on a Quad Core with 320 GB hard and 4 GB ram...now i need help to setup Project Management (PM) module for a hypothetical construction company with the required functionalities (just limited functionalities and Not complete functionalities as in EBS).i need help in setting up Project Management module from the very basics...so can you help me out in this...thanks in anticipation

Hi,
Please post only once (do not post same thread across multiple forums).
help with Financials setup from very basics...
Re: help with Financials setup from very basics...
Regards,
Hussein

Securing Web Services with Access Manager

Hello All
I have installed the java_app_platform_sdk-5_04-windows.exe that comes with Acces Manager 7.1.
I want to secure a webservice, so I have created a webapplication (with netbeans 6) with a webservice inside. I have also create a web client application that calls the webservice. The providers are configured in the server and I have enabled the soap security .
When I use anonymous authentication everything works fine, but if I used any other security method the following exception arises:
[#|2008-04-29T09:41:07.343+0200|SEVERE|sun-appserver9.1|javax.enterprise.system.core.security|_ThreadID=21;_ThreadName=httpSSLWorkerThread-8080-0;_RequestID=1a997eb3-6287-41f4-a540-0b9c86841683;|AMServerAuthModule.validateRequest: Failed in Securing the Request.|#]
[#|2008-04-29T09:41:07.375+0200|WARNING|sun-appserver9.1|javax.enterprise.system.stream.err|_ThreadID=21;_ThreadName=httpSSLWorkerThread-8080-0;_RequestID=1a997eb3-6287-41f4-a540-0b9c86841683;|java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.identity.agents.jsr196.as9soap.AMServerAuthModule.validateRequest(AMServerAuthModule.java:173)
     at com.sun.enterprise.security.jmac.config.GFServerConfigProvider$GFServerAuthContext.validateRequest(GFServerConfigProvider.java:1179)
     at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:168)
     at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
     at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
     at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
     at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
     at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
     at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
     at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:159)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: com.sun.identity.wss.security.SecurityException: Unsupported security mechanism.
     at com.sun.identity.wss.security.handler.SOAPRequestHandler.validateRequest(SOAPRequestHandler.java:232)
     ... 46 more
|#]
[#|2008-04-29T09:41:07.390+0200|SEVERE|sun-appserver9.1|javax.enterprise.system.core.security|_ThreadID=21;_ThreadName=httpSSLWorkerThread-8080-0;_RequestID=1a997eb3-6287-41f4-a540-0b9c86841683;|SEC2002: Container-auth: wss: Error validating request
com.sun.enterprise.security.jauth.AuthException: Validating Request failed
     at com.sun.identity.agents.jsr196.as9soap.AMServerAuthModule.validateRequest(AMServerAuthModule.java:188)
     at com.sun.enterprise.security.jmac.config.GFServerConfigProvider$GFServerAuthContext.validateRequest(GFServerConfigProvider.java:1179)
     at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:168)
     at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
     at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
     at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
     at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
     at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
     at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
     at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:159)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
     at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
     at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
     at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.identity.agents.jsr196.as9soap.AMServerAuthModule.validateRequest(AMServerAuthModule.java:173)
     ... 41 more
Caused by: com.sun.identity.wss.security.SecurityException: Unsupported security mechanism.
     at com.sun.identity.wss.security.handler.SOAPRequestHandler.validateRequest(SOAPRequestHandler.java:232)
     ... 46 more
|#]
It�s says something about th security mechanism is not supported. But I don�t know why. �Any idea?
Thank you

Hello again,
I am not using ssl. I am using the usernametoken or de saml-voucer mechanish and It happens in both. But with the anonymous mechanism doesnt happen.
...

Integrating Identity Manager with Access Manager

We have a plain vanilla installation of Identity Manager 5.5. We are attempting to integrate Access Manager 7 (also plain vanilla install). Both were deployed into Application Server 8.1 (all running on Solaris 10 x86).
Here is what we ran into:
1) When IDM is the only application deployed in Application Server, we can log in to its administration console with the base ID of "configurator" without a problem. Next, we installed Access Manager 7 without any errors. Now when we attempt to log into the IDM administration panel (still using "configurator"), IDM can no longer find the �configurator� ID. We tried using AM to add an ID of "configurator" to the LDAP directory (figuring that was the problem), but we still cannot get into IDM. What do we need to do to "integrate" these two products? We haven't even attempted customization yet.
2) Does anyone know of ANY sample apps that show IDM and AM working together?
Thanks in advance

Raghavan,
Do you have any template doc for this configurations, We did the same only thing that we changes is instead of using the fully qualified DNS name we used the ip address in the AMConfig.properties file.
Any ideas?
--Srini

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

[Solved]Need help with backup-manager

So I'm trying to set up backup-manager to make.. well, backups. Their wiki has been shut down thanks to spammers, and ours has no specific entry for backup-manager, so I will have to do it with its man page and the (well documented) config file. However, I still have some questions. Sorry in advance for the amount of questions and the length of the topic. I just wanted to get this clear in one go.
First: I want to make a *full* system backup, so that I can restore my system in case of breakage without reinstalling. When I looked at creating backups in the past, I noticed some folders don't necessarily had to be backupped. What folders in / could I skip?
Second: I chose the tarball backup format. Would it then be safe to comment out all the other variables (for tarbal-incremental/mySQL) backups?
Third: Now there were some parts of the config file that I didn't understand. I hope you can explain some of those parts to me.
# Number of days we have to keep an archive (Time To Live)
export BM_ARCHIVE_TTL="5"
That means the archive it creates will be removed after 5 days - but what if I copy it to my external hard disk? I don't think it will delete it then, so would it be safe to comment this out - or what will it do if I just keep it this way?
# At which frequency will you build your archives?
# You can choose either "daily" or "hourly".
# This should match your CRON configuration.
export BM_ARCHIVE_FREQUENCY="daily"
I either want to make a backup when I want to, or weekly - not hourly or daily. Is this possible with backup-manager?
# Do you want to purge only the top-level directory or all
# directories under BM_REPOSITORY_ROOT?
export BM_REPOSITORY_RECURSIVEPURGE="false"
I don't understand that option. Could you explain me what it will do? Info: BM_REPOSITORY_ROOT is set to my home folder. It's the place where the archives are stored.
# Do you want to replace duplicates by symlinks?
# (archive-DAY is a duplicate of archive-(DAY - 1) if they
# are both the same according to MD5 hashes).
export BM_ARCHIVE_PURGEDUPS="true"
Will this harm anything in my system?
# Do you want to dereference the files pointed by symlinks ?
# enter true or false (true can lead to huge archives, be careful).
export BM_TARBALL_DUMPSYMLINKS="false"
This would 'destroy' all symlinks, no? I'm going to keep this at false, but I would like to know.
Last edited by Unia (2011-08-29 18:19:37)

Tried to do a selective upgrade & broke something this morning so I tried restoring my CompleteRaid0 backup, worked like a charm.
This is the latest backup script I'm using:
#!/bin/sh
# Little script to tar up the important root folders.
# To untar, use:
# tar -xvpzf /path/to/backup/<date>-backup.tar.gz -C </path/to/root>
echo "Do you want to clear pacman's cache before tarring up the root folder? This will save time in both the tar- and untar process."
echo -n "(y|N) > "
read a
if [[ "$a" = "n" ]] || [[ "$a" = "N" ]] || [[ "$a" = "" ]]; then
echo "Pacman's cache will not be cleared."
else
echo "Pacman's cache will be cleared now, please wait..."
pacman -Scc --noconfirm
echo "Pacman's cache succesfully cleared. Continuing now..."
sleep 2s
fi
DATE=`date +%m%d-%H%M%S`
CB=CompleteRaid0-$DATE.tar.gz
NB=FreshInstall-$DATE.tar.gz
echo "********************************************************************************"
echo "Proceeding with Fresh Install backup $NB."
echo "********************************************************************************"
sleep 5
cd /
tar -cvpzf $NB --one-file-system \
/boot \
--exclude=/$NB \
--exclude=/dev \
--exclude=/etc/fstab \
--exclude=/home \
--exclude=/lost+found \
--exclude=/media \
--exclude=/mnt \
--exclude=/proc \
--exclude=/root \
--exclude=/sys \
--exclude=/tmp \
mv $NB /home/chuck/Backups/
echo "********************************************************************************"
echo "Sleeping for 10 seconds."
echo "Proceeding with complete backup $CB."
echo "********************************************************************************"
sleep 5
tar -cvpzf $CB --one-file-system \
/boot \
--exclude=/$CB \
--exclude=/tmp \
--exclude=/mnt \
mv $CB /home/chuck/Backups/
echo "********************************************************************************"
echo "Backups Complete"
echo "********************************************************************************"
sleep 10
exit 0
Restored it with this:
#!/bin/sh
# To untar, use:
# tar -xvpzf /path/to/backup/<date>-backup.tar.gz -C </path/to/root>
tar -xvpzf /home/chuck/Backups/now.tar.gz -C /
mkdir /proc \
/lost+found \
/sys \
/mnt \
/media \
/mnt/bind/Downloads \
/mnt/bind/Pictures \
/mnt/bind/Maintenance \
/mnt/bind/Music \
/mnt/bind/Backups
exit 0
Of course the directories already existed so that part was unnecessary & only needed if I had restored onto a fresh installation.

Help with access manager

Similar Messages

Maybe you are looking for