Help with Adjustment brush

Hi All,
I have upgraded LR2 to 2.1. Now I can't use the adjustment brush. When i click on the photo to make an adjustment - nothing happens; not white dot, no change, no nothing. HELP! What am I doing wrong? The gradient filter works just fine.
Any help will be greatly appreciated.
Al

Albert - if you haven't already, after clicking on the brush tick the small box underneath it to open a drop-down list. At the bottom of this list is another box alongside the word 'Colour' (or color if you're American :-) ). Click or double click on this box to bring up the colour pallet and using the ey-dropper pick a crazy colour such as a deep red. Now try painting with the bush. If you didn't notice the effects before it may be because the chosen colour was way at the bottom of the colour pallet giving you a neutral grey (gray) which is sometimes hard to spot.

Similar Messages

  • Need help with adjustment brush in LR3.6, Windows 7

    I have a couple questions regarding adjustment brushes in LR 3.6 which I either can't find the answer for or the answer isn't working for me.
    1.  I recently found out there should be Iris Enhance, Skin Soften, etc. brushes in the presets.  I can't find them under the adjustment brush.  I've tried going to Edit->Preferences->Presets->Restore Local Adjustment Presets as several others have suggested but it doesn't appear to do anything.   I have found these files where I've read they're supposed to be (../AppData/Roaming/Adobe/Lightroom/Local Adjustment Presets) but I can't find them in LR unless they're somewhere other than the Adjustment Brush panel.
    2. Also, 'O' turns the mask overlay on and off as it should.  I have 'on' set to red but for some reason 'off' is set to blue and I have to desaturate it everytime I turn off the overlay mask.  How do I change the "off" state to be no color?
    Thanks.

    I know off is supposed to be no color but for some reason it's a faded blue color.  The little rectangle next to color that's supposed to have a sort of 'X' from the corners isn't gray, like it's supposed to be, but blue.
    As far as I know, I only have 1 catalog.  I went to Edit->Preferences->Presets and I do not have "store presets with catalog" checked. I checked it and have now found the presets I asked about.  Thanks much.
    Still can't figure out the mask overlay thing and it's really annoying to have to keep turning it off.

  • Need help with adjusting Javascript code to work in Adobe Edge (Countdown)

    Hello
    Im a newbie when it comes to working with Javascript and Adobe Edge and need a bit of help with adjusting some javascript code to work with Adobe Edge. A friend of mine helped me with making this javascript code: Edit fiddle - JSFiddle
    Its a simple countdown which counts down to a certain time at a certain date. What I aim to do is to add this code as a trigger on a text-element called "countdown" (within a symbol called "count").
    I have tried to do this as the code is, but it does not work. Anyone have any suggestions?
    Thanks!
    Mvh,
    Øyvind Hermans

    Hello again
    I have stumbled upon a problem with these animations; They crash the browser after viewing them a little while, usually less than 30 seconds in.
    Is this problem also occuring when you watch the animations?
    Is the countdown-code to much for the browsers to handle?
    Thanks in advance for your answers.
    Sincerely,
    Øyvind Hermans

  • HELP! Lightroom Crashes Only with Adjustment Brush and only when using HDMI output!

    This is very frustrating. I use my Acer N56V laptop to teach Lightroom workshops. I use a 32 inch television as a display. When I have my laptop attached with an HDMI cable and try to use Lightroom's adjustment brush, it crashes. Either the screen and computer just shuts down or I get the Blue Screen of Death. I can do anything else! I can edit in Photoshop, do anything else in Lightroom or even Silver EFX Pro. I can even click on the adjustment brush. But the minute the brush hits the photo (and not before), the computer crashes. If I don't have it attached to the HDMI or if I use a Serial cable, no issues. It's only the adjustment brush and only the HDMI output.
    I called Adobe and they said it was because my onboard video card was primary and not the Nvidia. I called Acer and they said it's auto detect. I also tried making the Nvidia card primary and it still happened. Any ideas???

    You have switched the overlay mask to always show. Fortunately, it's easy fixed i.e. tap the O key. Shift+O will cycle the overlay through various colours
    Other Adjustment Brush and Graduate Filter shortcuts and modifiers are listed them below:
    Open Adjustment Brush - K
    Open Gradient Tool - M
    Show/hide Pin - H
    Always Show - Shift + Cmd/Ctrl+H
    Show Selected/Never Show - Shift+H
    To increase Amount - Right Arrow
    To decrease Amount - Left Arrow
    To increase/decrease brush size -  ] / [
    To increase/decrease feather - Shift+] / Shift+[
    Set Flow Amount - Number Keys
    To commit  and/or start new a brush stroke or gradient - Enter / Return
    To delete the selected pin - Delete
    Holding down - Alt/Option key activates erase mode
    Toggle Auto Mask On/Off - A
    Pressing O toggles on/off the overlay
    Shift+O cylces through alternative colours for overlay
    To constrain gradient to vertical/horizontal  - hold down Shift plus drag
    To invert the gradient - '
    To scale from center - Alt/Option plus drag

  • Need help with adjusting size for photos in my website

    Wow it's super to know about adobe forum which i never thought existed, i have been to the adobe site several times befor but never noticed there is a forum
    Ok i have few issues would like some help if possible.
    I have a website for public holidays and festivals and i have been really stressed in the ways i am adding the photos which i am buying from fotolia. First in my featured images the screen is very wide and slim...so i am really having hard time with adjusting the photos so they would fit in a way and show the best part of the photo in the screen, once the featured image is clicked on then their is no problem since it opens up in the full size. Is their a speacial tool in adope (i have cs4) which deals with images in this aspect? Secondly, before i was downloading the image with the regular size in which i bought them (around 3000 px) but that significantly slowed my webiste and i had to resize them into around 500 px, but now the image is small. what is the way around that, is there a feature where i can keep the photo big size with high resolution and little px. I see many big nice resolution photos but very small in size. i have just purchased a lot of photos that i would be posting soon and would like to do them right from the start.
    I don't know if i explain the situation right in words but you can take a look here, most photos for the posts are on the main page, please take a look and tell me how i should revise or make better for my photos in the featured images.
    I have very little experiance in photoshop so i made a very simple logo, but is there a tool that is speacialy designed to help make it easy doing a professional logo?
    Any comments, hints or help would be highly appreciated
    Hmmm one more thing....how do i add a pic for my profile? i don't see anywhere i can do so

    You should use the crop tool to crop your images. You should never squish your images, it really looks unprofessional:
    For your problem with saving images, you can optimize your images for web using the "Save for Web…" menu option:
    Make sure that you save your images at the dimension that you want them to display on your website (It looks like all your images in the blog are 620px wide, go with that).
    As for your logo, you can make them in Photoshop or Illustrator, but I would reccomend making yours in the latter. Here are some tutorials on logo creation: http://ibrandstudio.com/tutorials/46-adobe-illustrator-tutorials-logo-design

  • Export File to PS with Adjustment Brush effects/masks

    This may have been answered before but I searched Google and such with no luck to finding an answer or unsure of what exactly to search as.
    Basically Im curious to know if you edit a photo in Lightroom and use the adjustment brush to desaturate the background of a photo for example, then want to export and do further editing in Photoshop, is it possible to do so and have the adjustment brush effects as a mask or layer of sorts to then easily edit in Photoshop?
    Since the adjustment brush feature in Lightroom automatically creates a mask I thought I would be useful to import into photoshop and still retail the mask somehow making it easy to isolate that area masked out.
    Thanks.

    Thanks, bit of a shame, I do prefer the ease of how LR masks out the areas easily with the brushes.
    I could do it manually in PS but takes some time.
    I've seen a few plugins for layers within LR but I think its an external type app run via LR (OnOne Software makes it) but I doubt it'll do what I want from the looks.

  • Scroll image with adjustment brush on

    Hi - anybody know how:-
    Zoom to 100% and have the adjustment brush switched on, and then scroll into other areas of the image (without closing the adjustment brush dialogue)??  I mean like in PS you can toggle quickly between brush and the hand, so that you can scroll to another part of the image and then carry on painting with the brush.
    Thanks

    In Windows, hold down the spacebar- cursor becomes a hand.

  • Problem with Adjustment Brush enhancing parts of picture it shouldn't

    Working on some pictures I encountered the following problem today. I did my major adjustments to the picture (e.g. Exposure -0,95) and then wanted to add some minor touches with the Adjustment Brush. As soon as I placed one click with the brush tool anywhere in the picture the highlights of the whole picture becamer over exposed.
    This first screenshot shows the picture after the first adjustments:
    Now you can see that I added an Adjustment Brush (Size:11, Feather: 25, Flow: 50, Density: 100) far away from the face and still the highlights in face are blown out. Nothing else has been changed:
    Does anyone have an idea what the problem is and how to avoid ACR doing this? It does not make a difference if the adjustment brush is set to a plus or minus value.
    Thanks in advance
    Oliver
    (Win 7 x64 Ultimate, Photoshop CS5 12.0.4, ACR 6.5.0.216)

    Thank you for the replies, Tai Lao.
    1. The behaviour is occuring no matter if viewed in 100%, 24% or any other magnification.
    2. No, I haven't tried ACR 6.6. Judging from this thread the problem seems to exist for quite a few versions now.
    3. The brush stroke seen on the screenshot was a "new" one. It was the first brush action done to the picture.
    I tried reducing the size of the adjustment brush to 2 and place this tiny brush stroke in the outmost corner of the picture. Still the highlights went up. Opening the picture as a Smart Object before using the brush everything is fine in PS. Reopening the Smart Object in ACR and using the size 2 brush far away from the higlights causes the same unwanted beheaviour.
    At first I thought it had something to do with having done some adjustment to the exposure before but testing showed that this phenomena happens even when nothing was done the picture prior to using the adjustment brush.

  • Problems with Adjustment Brush - LR 2.3, Macintosh

    I've had numerous discussions with folks at Adobe's Tech Support and they have no idea what is going on with my problem in LR 2.3 on a Mac (10.5.6, 2 X 3 GHz dual Intel, 5 GB ram, startup drive has catalog, images stored on internal drive) so I thought I'd post the problem here just so it was brought to the attention of other folks at Adobe as well as the general user population.
    I preform basic parametric edits (Exposure through Detail) on my images and then apply a number of adjustment brush edits to the images, mainly exposure, clarify, sharpen. All of these edits are done over perhaps 25% of the image at the very most, usually a lot less, say 10% of the image.
    I then leave LR's Develop module and in the Library, I have used the "Update DNG Preview and Metadata" menu command for any photos that have the downward pointing arrow appearing in the top right corner. I'm not sure why this is necessary or why this indicator is showing since I have never exported these photos for external editing and I have the Metadata preference set in Catalog preferences to "Automatically write changes into XMP." I did have this setting off for some time and after reading Martin Evening's discussion of the pros and cons of using this feature decided to have it checked on.
    When I return to my Adjustment Brush edited photos, the AB edits are splattered all over the image, not in any way like the edits I applied when I did the initial edits. I can see the edits quite clearly using the red overlay. Also, the AB control buttons are sometimes in different locations than where I had originally placed them. When this problem first occurred (LR 2.3 RC) it would take minutes to move from image to image in the Develop module. Lots of the Mac spinning beach ball! This is better in LR 2.3 though there is still a slow down after the AB has been applied.
    I have exported and moved my catalog of photos to a new computer and the problem persists. I have removed the history to before the AB edits were applied and reapplied the edits and the problem comes back (I think as long as I use the Update DNG Preview and Metadata menu item?!?). I have checked the catalog for integrity as well as optimized the catalog. I have tried applying AB settings to other photos and I have yet to duplicate the problem though I am still testing this.
    I showed the problem to Jeff Schewe at the Epson Print Academy in Los Angeles in February and he had no idea what was going on. This was before the release of 2.3. The problem first showed itself while I was using LR 2.3 RC and was also in LR 2.2. It now shows up in LR 2.3. I am being SUPER judicious about using the AB in it's current state and will have to go into Photoshop to do some of the things I wanted to do in Lightroom. I did send a copy of two of the images to Adobe tech support but I never heard anything about what happened with those examples.
    Does anyone have any idea what may be going on? Any thoughts would be greatly appreciated and I would be glad to clarify any parts of this post that are unclear or to try out any testing that might clear this up. This is happening to about 25 photos in my catalog.

    The problem I was having with Lightroom 2.3 and the Adjustment Brush has resurfaced.
    Since I had a large part of my hardware replaced as I indicated in my previous posts here I'm sure that the problem is not hardware related.
    When the problem resurfaced I noticed that one of my external hard drives that is my Time Machine backup was running (accessing the disk). I cannot be sure but the image corruption may be related to Time Machine (Mac OS X 10.5.6) running while I have LR 2.3 running. This is just a complete guess. I have disabled Time Machine and only run it manually now when LR is not open. I have reopened my past tech support cases and we'll see if Adobe has anything to say about this. What a pain!
    BTW, I too have been getting slower and slower performance after I apply the AB to an image. Here's is a sample of one of my corrupted images showing the "splattered" adjustment brush edits that I didn't do but LR decided were "artful." The "splattered" edits appear in many images and appear to have no reason, thus the "splattered" term - somewhat like Jackson Pollack.

  • No Basic/Advanced Mode with Adjustment Brush

    I have LR3 and can't make any changes using the Adjustment Brush.  I can highlight an area (and change colors of the overlay) but that's it...any ideas on what I'm doing wrong?  I also have no Basic/Advanced switch...
    thanks

    The basic/advanced modes were removed from the application as part of the Lr3 update. Hit H key to make the brush visible and O to toggle overlay on/off. Make sure that Density and Flow sliders are not set to Zero. You may have to toggle open the full brush panel to see these options.

  • No pin shows up with adjustment brush

    Using the adjustment brush, a pin is supposed to appear where you make your initial brush stroke. It doesn't show up, even though the effects of the tool are there. I only know what is painted by typing "O" so that the red coloring shows up. The pin does show up using the Graduated filter.
    LR2 trial version, Windows XP SP2, 3 MB RAM, 1.8 GHz duo core,

    Hit "H".

  • Override preset setting with adjustment brush?

    I used Creative B&W low contrast preset to give an image my neighbor's white cat a high key B&W look. I would like to use the adjustment brush to restore the color of the cat's eyes. I thought raising saturation would do the trick as the preset reduces the saturation to 0. Using the adj brush doesn't seem to do anything to the cat's eyes.
    You can see the image here..
    Thanks for any suggestions.
    LR 2.4

    At a guess , the preset may also have switched theTreatment to B&W, in which case the saturation in a brush will have no effect. You would have to do this the other way around and brush on the de saturated parts of the image. Or take the easy way out and use PS and masks and layers.

  • Help with adjusting layout, re-sizing text frames and images to fit new margin?

    i'm using InDesign CS5.5. I have a layout with several text frame boxes as well as some jpg and pdf images. I'm expanding the margin on one side and want to expand the text frames to utilize the extra space rather than just shift everything over. I've used the adjust layout script (which still requires some manual adjustment after) and obviously everything can be done manually but I'm looking for a more efficient solution. One challenge is that my pdf image needs to be re-sized separately to maintain scale of the image, the text frames just expand horizontally. What I would like is to have is a script that can do all of this at once, or is there a way to save the layout settings and apply them to my other documents? I have almost 300 documents to adjust... Can anyone suggest anything? Thanks.

    It could probably be modified to run on all open docs or a folder. You should ask over in scripting. InDesign Scripting

  • Please help! I need help with history brush problem

    I'm completely new to photoshop but I have done this thing before:
    open image
    >ctrl J
    >>select new layer
    >>>select Curves
    >>>>adjust accordingly
    >>>>>ctrl+backspace (pic goes back to original color)
    >>>>>>select history brush
    this paints in that curve layer i guess...kind of like I'm putting a hole in my orginial to see the change that I made in the curves layer but only on the places I want
    So for some reason this isn't working anymore! And i have no idea why! Now this error pops up: Could not use the history brush because the history state does not contain a corresponding layer.
    Im using CS4 extended
    What am I doing wrong?

    As stated, set your History Brush source.
    Also always be careful to note which layer is active after you do an undo operation.
    -Noel

  • Help with adjusting spacing between thumbnails and image in slideshow

    How can I adjust the spacing on the slideshow page?
    Customer wants more space between the thumbnails at the top and the image(s). Can I move the image & navigation tool or adjust the image size relative to the thumbnails and navigation tool at the bottom?
    Although I'm familiar with html source code and working on simple stuff at that level, I have yet to locate it in iWeb and make any adjustments.
    If anyone has step-wise instructions, I'd appreciate it. Thanks much.

    Although I'm familiar with html source code and working on simple stuff at that level, I have yet to locate it in iWeb and make any adjustments.
    iweb photos page's elements: header controls, detail view and footer controls are generated by ajax widgets, so there is nothing to in page source for you to find.
    If anyone has step-wise instructions, I'd appreciate it. Thanks much.
    that would be the instruction on how ajax widgets build photos page... there is none.
    you can send feedback to apple and ask for details on iweb widgets and tools to build widgets.
    that said, it can be done... check out with safari: http://temp.cyclosaurus.com/DetailView_Rearranged/Photos.html
    code is linked to my example, i don't do tutorial.

Maybe you are looking for