Help with code for score-keeping with dynamic text box

Hi All,
I'm having an actionscript 2.0 problem with keeping score.
I have a dynamic text box with a variable called score.
I have the following action code for that variable:
_root.score = 0;
For the correct answer button I have this action:
_root.score = Number (score) +10;
This works fine to increase the score by 10 for each correct answer.
The problem is that I can't get an if statement to work for when the score reaches 150 to gotoAndPlay a certain frame. I've tried various syntax, I've tried it on the action for a button and an action for the timeline with:
onRelease = function () {
(My learning game is set up to allow for users to answer up to four extra questions to reach the score of 150).
Nothing works. Any suggestions please?
Pam

Below is a link to a small sample file. See if you can find anything different between your file and the one linked that might cause yours to not work as desired.
http://www.nedwebs.com/Flash/AS2_score_sample.fla

Similar Messages

Create Transaction code for Area Menu with specific namesapce(/arba/ond_proc)

Hi Friends,
As I have created one Transaction Code For Area Menu with the namespace like (/arba/ond_proc).
It is working fine when I run this with /n/atba/ond_proc.
But When I ran this independently it's not working like:( /arba/ond_proc not working independently.)
Please suggest me some solution.
Thanks And regards
Rahul Singh

Hello
when you excecute the query in right han side corner you can get the program name
go to se80 select program & type this name and then you can create a tcode for that prog in SE80
reward points if helpful.
the prog name will be something like : AQZZ/SAPQUERY/* " ur query name
you can search for the name also in this manner

Help: FSB Setting for MSI 875P with Intel 3.06 533Mhz & Corsair 512 27

Help: FSB Setting for MSI 875P with Intel 3.06 533Mhz & Corsair 512 2799 333Mhz
Need a little help here, Intel's specs for the P4 3.06GHz 533 is a multiplier of 23 x 133Mhz.
However 133Mhz as a FSB seems very slow.
The 875P NEO has two BIOS settings: CPU Ratio and Adjust CPU Bus
What are your settings for these - I am quite confused?
Thanks!
G.

133 is the stock FSB setting. set your memory to DDR333.
Do you want to overclock? you might want to set your memory to DDR266 which is 1:1. so u can adjust a bit of FSB from 133 to maybe 150.
PS dont forget your memory timing. 2-6-3-3 would be oki i think. what bios version r u using?

Need help with specifying type range in dynamic text box

is it possible to specify my type range in a dynamic text box
that is loading images as well as type? Everytime i specify the
range flash quits. if i take out the image loading actionscript
then it's fine. grrrrr

I assume that you have added this field to the field catalog, so make sure that the name in the field catalog is exactly the same as in the internal table which holds your data, and make sure that you are filling the field name as uppercase.
Regards,
RIch Heilman

Showing RSS feed in Dynamic Text box (with hyperlink)

Hi all -
I am currently trying to pull RSS data into a project for my first time and am trying to get 3 (potentially 4) boxes filled with rss data that will be updated. So far, I am going with Actionscript 3. So far I have the code below, but it puts data in a listbox. What is the easiest way to put the data in three dynamic text boxes inside a movie clip, so I have one for the title, one for description and one for link (shown as 'read more' text but a link using the url from the rss value)?
I am really banging my head against the wall on this one and want to get it sorted asap, so any help would be GREATLY appreciated! I have also attached an image to show what I am trying to do:
I also want to know if it's possible to show rss values only if they exist. For example, my xml feed currently only has 3 items that change, and i will be assigning these to boxes, but is it possible to display a fourth if it exists, and if it doesn't it just shows the first?
My code so far:
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, onLoaded);
var xml:XML;
function onLoaded(e:Event):void
    xml = new XML(e.target.data);
    var il:XMLList = xml.channel.item.description};
    trace(il[1]);
         lb.addItem({data:il.description.text()
                            label:il.title.text()}):
loader.load(new URLRequest("http://www.rssfeedhere.xml"));

you would create a movieclip (exported for actionscript and class = rssItem) with 3 textfields and the display shown in your message and use something like:
var loader:URLLoader = new URLLoader();
loader.addEventListener(Event.COMPLETE, onLoaded);
var xml:XML;
function onLoaded(e:Event):void
    xml = new XML(e.target.data);
    var il:XMLList = xml.channel.item.description};
    for(var i:uint=0;i<il.length();i++){
        var mc:rssItem = new rssItem();
        addChild(mc);
        mc.x = 300*i%2;
        mc.y = 300*Math.floor(i/2);
        mc.titleTF.text = il[i].title.text();
        mc.descriptionTF.text = il[i].description.text();
        mc.readmoreTF.text = ?
loader.load(new URLRequest(http://www.rssfeedhere.xml));

Dynamic text box, HTML Text with Image

Hello Everyone,
I am using Flash version 8. I have used the text tool and
created a dynamic text box and have attached the UIScrollBar
component to it. This text box is configured to allow the use of
html text to be inputted to it. I have code that reads a file which
contains a list of text files that I then read and place them into
the text box. The user can use the scroll bar to scroll through all
the text.
I have created an image that is a picture of the tab portion
of a file folder. On the tab I have place some text. This was all
done in Photoshop. This tab image is used to separate the different
stories in the text box. The image is save as a jpeg file
Everything you have just read works with out any problems.
Now for the problem!
This image is only 20 pixels tall and the text is not very
readable. As we all know the HTML tags are very limited in Flash 8.
Ideally I would like to put the text and image in to the text
box as I would normally do. Then place text on top of the image and
have it all scroll properly with in the text box.
I have taken the tab image and converted it in to a graph
symbol and then put the text on top of the image. This looks good;
however I don’t know how (or if it is even possible) to place
the graphic symbol in to the text box at the correct place within
the text.
Does anyone have ideas on what may work? Remember that the
image I am working with is only 20 pixels tall which is why the
text quality on the image is so poor.
Thank you all for any help you may provide,
Steve

Yes Tim I am using the <img> tag and I know that I
can’t place text over the image. I have set the height and
width to be the exact size of the image. However When you go to the
webpage it will open the movie to the maximum size based on the
resolution of your display; however I do maintain the aspect ratio
of the movie. For testing I did set a fix size to the size of the
movie. Sometimes the fix size (1000x750) looks better and sometimes
a larger size (example 1280x1024). I believe that the main problem
is the fact the size of the image is 670 pixels wide by 25 pixels
high and of the 25 pixels the text is only 18 pixels tall. In
Photoshop this makes it about a 1.75 point font. As you can see the
real problem is that I don’t have enough pixels to make up
the text. This is why I am looking for an alterative way to create
the text.
I tried importing the image into flash as a graphic symbol
and then using the text tool to create the text. The results looked
real sharp, the text was nice and crisp (just what I wanted). The
problem is that I could not find a way to place the graphic symbol
into the dynamic text area like id did using the <img> tag.
This symbol needs to scroll as you scroll the text in the text
area.
This is why I am asking for help. I am looking for some ideas
that may work.
Thank you,
Steve

How to link one scroll bar with two dynamic text boxes.

How to link one scroll bar with two dynamic text boxes.
If i move scroll bar in one text box,automatically text will
be moved in another text box.But scroll bar is not visible.
Can you please help me.
Thanks in advance.

See the following article:
JavaScript - setFocus Method for tabbing to next form field
And see if iOS can even handle the sample form.
iOS and android devices are not a powerful as your desktop of laptop computer and have limited support for JavaScript within PDF forms. This limitation for specific apps ranges from none to quite a bit but not all JavaScript.

Issues with dynamic text box formatting

I'm running into issues with using HTML formatting for a dymanic text field. I know these are quirky and I cannot figure out how to get the formatting proper.
I have on my stage a dynamic text box called "content_txt" inside of a movie clip instance "content_mc". When it enters the frame, I fade the "content_mc" from alpha 0 to 100 using a timeline animation. In order for this to work, I have to embed the font in my "content_txt" text field. However, the only way I get get the HTML formatting to work is if I do not embed the font.
The dymanic text field is set to render as HTML. In my actions layer, I set the text:
this.content_mc.content_txt.htmlText = "<b>Hello world,</b> it is me again."
In summary:
1. If I do not embed the font, the alpha fade does not work but the HTML formatting does.
2. If I embed the font, the alpha fade works but the HTML formatting does not.
How do I resolve this? It's driving me nuts!

How do you embed just one style?
I've tried typing three words in the text field and formatting each (regular, bold, italic) but the text field just defaults to whichever format is first.
Also, I tried embeding the whole character list and did not have success.

Can anyone explain with senairio for formula variables with replacement pa

can anyone explain with senairio for formula variables with replacement path?

See the below link
An Example for Replacement path
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Document Count using Replacement path
I've explained the steps in this thread.
Query formula-Counter???
Example for Replacement Path: Characteristic Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
Variable Replacement Example
http://help.sap.com/saphelp_nw04/helpdata/en/af/809528939d5b4fbff7e16a5bdc0d85/content.htm
Formula Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5f9ac61a205a459d0e7ef313d10321/content.htm
Regs
Gopi
Assign points if it helps

Printing a movie clip with dynamic text boxes

I've got a certificate inside a movie clip, and i want the
dynamic text box to dispay the user name, but for some reason it is
coming up undefined, even though i have the dynamic text box set to
finalname = _root.inputname, but it comes up as undefined on the
screen. :( Can anyone tell me where i am going wrong?
Is there a way to print just a specific movie clip on the
screen? I can only print all the frames in the movie and without
the dynamic text box... any help would be greatly
appreciated.

assign the mouseChildren property of your movieclip to false.

Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box ��. Thanks all Merry Christmas!

Is the Hitachi AXM209UKR Slim Micro System with docking for iPod compatible with the iPhone 4 (Xmas present bought for me)? Need to know before I open box . Thanks all Merry Christmas!

Not to worry took back to store and got one that works with ipad2 as well

Targeting Dynamic Text Box inside moviecip with variable

Hi,
How does one target a dynamic text box to change the border
color inside of a movie clip? Example below which does not work
theName = ("answerPrint" + arryCount);
boxName = ("box" + (arryCount+1));
_root.pagePrintPartA[theName][boxName].border = true;
_root.pagePrintPartA[theName][boxName].borderColor =
0x00cc66;

Thanks for the reinforcement, but I should of indicated what
was what:
theName = ("answerPrint" + arryCount);// Name of Variable
inside Dynamic Text Box Inside MovieClip
boxName = ("box" + (arryCount+1));// Instance Name of Actual
Dynamic Text Box Inside MovieClip
_root.pagePrintPartA[theName][boxName].border = true;
_root.pagePrintPartA[theName][boxName].borderColor =
0xFF0000;
By certifying this script you showed me wher I went wron (not
seeing the forest from the trees). The last two lines should be:
_root.pagePrintPartA[boxName].border = true;
_root.pagePrintPartA[boxName].borderColor = 0xFF0000;
I was targeting backwards. Thanks alot DazFaz.

Dynamic Text box with linking to frames

I have a problem. I've tried everything I can think of and what I have Googled, but nothing has helped. I have a scrolling dynamic text box and I need some words in that text box to link to frames, like buttons (Not a URL). This is the file and the frame I'm on is "conflictNorthernPlains" https://dl.dropbox.com/u/72608572/civilWarEra7.zip
Thanks

use:
var tf:TextField = new TextField();
addChild(tf);
tf.htmlText = "<a href='event:frame1'>link to frame1</a><br/>";
tf.htmlText += "<a href='event:frame2'>link to frame2</a><br/>";
tf.addEventListener(TextEvent.LINK, tfF);
function tfF(e:TextEvent):void{
gotoAndStop(e.text);
p.s. please mark helpful/correct responses, if there are any.

Dynamic Text Boxes / Resizing text boxes

I have a site with a dynamic text box that I have initialized
(I'm not sure that that is the correct term) at the beginning with:
myText = new LoadVars();
myText.onLoad = function()
{ textBox_txt.htmlText = this.content;
myText.load("text/bio.txt");
stop();
Then I have just used a text box throughout with the same
instance name, although sometimes I have it on a new keyframe. I
assumed I could just keep loading text into it on different frames
with:
stop();
myText.load("text/performances.txt");
This appears to be working, except that sometimes it seems to
be confused and the text box on a certain frame has the wrong text
in it. Do I have to initialize one for each frame in order for them
to display the right code? What could be causing it to load another
text file if it's frame action is telling it to load something
else? It seems unnecessary to have to re-initialize it for a new
text box instance in every new frame, but is that the way it has to
be done?
Also, I'm not clear on resizing text boxes. It seems like if
I use the width and height numbers to resize this text box on
different pages then it changes the size of the text inside, and
the scroll bar (the UIScrollbar) is a little squishy looking
sometimes. How does this work?
Thanks for any help.

You will find it much better to create a new LoadVars object
for each of the frames, just call them myText1 myText2 etc.
The name of the text box instance in this case is irrelevant
but best practice would be to give them individual names.
As for the stretching effect use setSize() for UI
components.

Displaying the result of a calculation in a dynamic text box

Hi folks,
I'm having a very minor issue here (operator error, I'm sure ). With the help of some folks here, I've created a series of calculations, and I've got that part down. Now, I just need it to show up in the movie.
I've created the dynamic text box in Flash (CS3), but when I hit test, it won't show up.
After all the calculations, I should have a figure that I call totalmoney. My dynamic text box is called total. The user doesn't need to hit anything for it to appear. It just appears as part of the movie.
Here's my code:
stop();
var startDate:Date = new Date(2010,0,12); // use your startyear, startmonth, startdate in the new Date() parameters.
var currentDate:Date = new Date(); // assuming user's clock is correct and in your timezone. else use server date/time.
var numberOfSeconds:Number = (currentDate.getTime()-startDate.getTime())/1000;
var interest:Number = (numberOfSeconds*0.74356);
var totalmoney:Number = (interest+15,000,000);
function displaytotal(evt:TextEvent):void {
total.text = "totalmoney";
Any thoughts?
Thanks!
Napo

You didn't have to bury any of the calculations in the function--leaving it as you had it is better. They could remain where they a=werew, and you'll probably find you want them outside it if you have other plans for using them. If left inside, they only have scope inside. In the programming world, it's good to think of functions as things that do one thing and one thing only (though it isn't often practiced that way)--it's called modular design.
When you place an event as an argument for a function, it typically means that there is an event listener that initiates the call to the function. If you work with buttons you'll see what I mean. But if the plan is to create your own call to a function when you desire it as such, not have it driven by an event listener, then you don't need to pass any event to it, though you may pass some other type of variable to it if need be.
For instance, what you have now will call the function without an argument because the function has the value built into its code....
displaytotal();
But you could also make the function a little more generic and set it up to recieve the value instead as an argument...
function displaytotal(amt:Number):void {
total.text = String(amt); // an earlier error of mine
displaytotal(totalmoney);
That would make your function a little more useful. Now it could be used to display other Number variables as well.
// my earlier error was that a textfield displays text, so you need to convert the Number value to s String.
Hope I'm not confusing you.

Help with code for score-keeping with dynamic text box

Similar Messages

Maybe you are looking for