Help with Connecting Playstation 3 to mac mini wireless.....

Well, I finally figured out how to share my wireless connection from my mac mini throughout my house.... it wasnt even in the network area, you have to go over to sharing in systems menu, and set up "internet sharing" through your ethernet port... after that it opens up this little mac into a wireless access point to your local ethernet throughout...... but............. even after my iphone, mac, windows laptop, etc.... log on easily... I cannot, Cannot!! get my ps3 to register an IP address. i have everything set up right, and thinking it was because i was ethernet linked through my dads router also downstairs "the main router of the house" and it was blocking me..... i did some studies... well i had another wireless router in the house.. so i plugged my ethernet into it, activated it and set it up.... it works.... then i try the ps3.... voilllaa it works...... so its not the main router blocking..... Why does a shared internet to ethernet mac system not understand what to do with a playstation 3 wirelessly???

My Mac mini is connected to the internet by Ethernet cable to my ISP's Arris gateway. I am sharing the Ethernet connection to two iPod Touches via AirPort from my Mac mini. This is how I configured the Mac to share the connection;
1. In Sys Prefs/Sharing I highlighted Internet Sharing (do not check the box)
2. Share your connection from: Ethernet (from the dropdown menu)
3. To computers using: AirPort (check the little box)
4. Press the button AirPort Options...
5. Name your Network
6. I use Automatic for the channel
7. I encrypt my network using a 40-bit WEP key
8. For a non-Apple device you must use only a 5 alphanumeric character, 40-bit WEP password or only a 13 alphanumeric character 128-bit WEP password
9. Press OK
10. Check the box for Internet Sharing
11. Answer any dialog boxes that pop up
Dah•veed

Similar Messages

  • Help with Boot Camp Internet Drivers (Mac Mini 2011)

    Hi all- I've come here looking for some help / advice with regards to internet access on Boot Camp I have recently installed.
    I have recently bought a Mac Mini i5 2011, and installed Windows 7 onto it. When I run OSX, I can access the internet with no issues, however when in Boot Camp, I come up against problems with Broadcom drivers and being able to connect.
    I have put my Snow Leopard disc (from the MBP I'm transferring from) into my superdrive, and installed the 64-bit drivers.
    I've also installed Boot Camp 3.1 and 3.2 updates.
    I have also tried installing the Broadcom wireless n drivers after searching for them in the list.
    Plugging an ethernet cable into the router doesn't work either, and I'm beginning to run out of options to try.
    Re-installing Windows hasn't worked.
    Any help will be appreciated, hope I'm not the only one to encounter this issue!

    Google is your friend. An OEM DVD from another Mac is not  though would think/hope - and forget reinstalling.
    Blame Apple. Goes same for audio, graphics.
    Broadcom drivers search on this forum.... should find lots of folks running into issues.
    http://www.bing.com/search?q=windows+broadcom+drivers

  • Can anyone help with clearing space on my Mac Mini, it says the hard drive is full and runs slowly.

    Please help, we got the Mac Mini from a family member so it may have his stuff on it but no longer required, we have only put a smal amount of data on it so don't believe we have over filled it. I backed up to a hard drive all photos etc as I thought it may be them filling it, now I cannot even scan a document to it. Is there any way to Defrag it as you can normally do to a windows system as well as either declutter it or restore the whole thing.
    Best Regards
    Smithy

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • Help with home system centered around Mac Mini server and 2 iPads.

    Hey guys - sure this question has been asked ad naseum but I could not find too much relavent.   My 2008-2011 Apple suite is slowly kicking the bucket and it is time to invest in all new. 
    Current setup:
    1- 4th Gen MacBook - limping along.
    1 - 5th Gen Unibody MacBook - good to go. 
    2 - iPhone 3GS - Soon to be replaced by iPhone 5 in July,  both limping along.  
    1 - 3rd Gen AppleTV
    1 - 2009 circa AirPort 802.11G,  limping along.  
    1 - 2nd Gen iPad 32GB WiFi+AT&T 3G
    Proposed setup:
    2 - iPad 4th Gen
    2 - iPhone 5
    1 - 3rd Gen AppleTV (stayover from previous setup)
    1 - AirPort 802.11N - replacing 802.11G due to WiFi speed limitations in high density community.
    1 - MacMini Server
    1- External drive to backup the MacMini
    So the plan is to ditch the laptops and replace them with iPad accessing items stored on the Mini.  Combine iTunes music through importing and create one account for future purchases.  Purchasing an external drive for backup of the MacMini,  horror stories on the TimeCapsule has me steering clear of that. 
    In my mind I may be envisioning this to be an easy feat.  Should this be as easy as I am imagining it to be or do I need to be worried about anything else that I am not thinking about?
    Thanks in advance! 

    Look at
    https://discussions.apple.com/thread/3197548?start=0&tstart=0

  • Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Look up "screen sharing" in help
    You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
    After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse.  Choose your mac mini's name, and look for the "Screen Sharing" button.
    Choose Apple menu > System Preferences, and then click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users:
    Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users:
    Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen:
    Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password:
    Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • Mountain Lion appears to break VNC connection to a headless mac mini.

    I connect to my headless mac mini with VNC.  Under lion this worked perfectly.  With Mountain Lion on my mac mini I can connect but many windows do not update properly.  If I connect an external display to the mac mini all is well again.  Any solutions?

    I use splashtop.
    Able to reach iPad resolution when i connect to my iPad, when the splashtop session ends, it drops back to 800x600.
    Maybe you could try it out and see if splashtop helps expand to 2560 x 1600.

  • Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

    Hi Guys,
    I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
    What is the problem here so I can get Pictures onto my Computer. ,

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Connecting Logitech Z5500 to Mac Mini or to Airport?

    All,
    I have this cable on order (http://www.amazon.com/dp/B0002JFN1A/ref=pe_385040_30332190_TE_M3T1_ST1_dp_1) to connect my Logitech Z-5500 to my system.
    Should I connect it to my Mac Mini, or to my Airport Time Capsule?
    Airport: I can stream media from other devices
    Mini: Avoid any lag for audio and video with FaceTime, etc.?
    Maybe 6 of one, half dozen of another, but thought I'd ask.
    Thanks!

    ok, my problem is solved ... I was able to get the display up by unplugging the hdmi cable from the mac mini, then letting it boot up, then plugging the cable back in ... finally could see the desktop, then reset my display settings to get rid of underscanning - which I had set up the day before so I could see my top menu bar - then set my tv's aspect adjustment to HD Size 2 (which had the same effect as underscanning ... and now I get the display up when start my mac mini ... however, I do notice some fine granularity in my display now (when white windows are opened for example), but I'll deal with that later if it's a real problem ... took hours of research to figure this out ... phew ...

  • I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite

    I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite.
    I have downloaded drivers from Brother
    I have tried searching for the printer once the drivers have been installed, but nothing...
    Not sure what else to do - any helpful suggestions are welcome.
    Thank you

    I tried the Reset Printer option - it didn't work at first but then I decided to download the drivers again... and now all is fine and dandy.
    Thanks for your help

  • How can i get my 2nd laptop to read home sharing with my other laptop and mac mini.

    how can i get my 2nd laptop to read home sharing with my other laptop and mac mini.

    if I take the laptop off site, i loose the connection
    Of course you do because you're no longer on the same network.
    Connect to your work's VPN connection and then share the files

  • Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
    The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
    For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
    If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

  • Problems with Halo Combat Evolved on mac mini server with HD3000 graphics

    There is frequent flickering of certain elements in the game (ie. background) and certain elements such as weapons are not rendered at all. This happens sporatically and not in a predictable manner. Does any body have any idea what is going on? I read that there are some issues with the HD3000 card on mac minis. I hope I did not make a purchase that I will regret.

    If I understand your question correctly, is there a reason you've replaced the integrated MySQL within Mac OS X Server with a second MySQL database implementation? (That's almost inherently going to get tangled; you'll need to shut off the default implementation.)
    Or is this a Perl module you've loaded and that is now tipping over? If you haven't replaced MySQL here, then have you started MySQL and run some tests with the database itself? This to make sure MySQL is operational, and that the problem you're working on is in the Perl pieces and not in the MySQL layer?

  • HT1296 when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    Thanks for your advice. However my private informations have nothing to do on a wandering cloud that floats on high over US vales and hills ( and credit to William WORDSWORTH for his poetry)

  • Help with connection flash builder 4.5 to remote php database

    help with connection flash builder 4.5 to remote php database

    Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\php5\pear;D:/webserver/apache2/htdocs/ZendFramework/library') in D:\webserver\apache2\htdocs\giga\first-debug\gateway.php on line 27

Maybe you are looking for