Help with containers in BPM

Hey guys
i m making use of /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit to do a synchronous File to RFC scenario,during design of BPM i m a bit confused as to which abstract interface should i use for Receive ,Sync send and Send step,is it the Abstract interface for the sender?or will it be different for all three of them,basically i wanna know based upon what criteria i should decide what interface to use in containers.
thanx
ahmad

Hi,
Your Message Interfaces should be-
1) Outbound Message Interface of type File- Async
2) Abstract Message Interface of type file to receive the message in the BPM of type FileReqest- Async
3) Abstract Message Interface of type File Response ie. to get the response from RFC- Async
4) Abstract Synchrnous - in this Request Message should be FileRequest created in step 2 and Responsemessage should be Abstract Interface created in the Step 3.
5) Inbound Message Interfac of type Target File - to output the RFC response in a file format- Async
So in the BPM container, you need to have Interfaces created in Step2, Step3
Assuming you are doing Mappign outside the BPM ile
1) FileReq to RFC Req
2) RFC Resp to FileRes.
Hope this helps,
Regards,
Moorthy

Similar Messages

Need help with Sync/Async BPM Scenario

I have an R/3 RFC -> XI -> HTTP (to vendor A) scenario that is working fine. It is a totally synchronous call event. The Integration Directory pieces sit in a scenario named HotkeyOutbound.
Now I need to create a process for RFC -> XI -> HTTP (to vendor Panduit). The R/3 RFC is the same sender, but vendor Panduit only supports an asynchronous HTTP connection. I followed the Sriram Vasudevan weblog on Sync/Async Bridge and created my BPM. I am stuck on trying to determine what to set up in the Integration Directory.
First off, should I be able to use the same HotkeyOutbound scenario as with vendor A so all hotkey stuff can stay together? Or do I have to create a new scenario with a copy of the R/3 business system for the sender? I moved forward with a new scenario (PanduitHotkeyOutbound).
I also need to know how many config Agreements and Determinations to use. The image at http://webpages.charter.net/kpwendel/keith1.html shows what I have so far. Which are not needed? What is missing?
And I tried setting up an HTTP communication channel for outbound async to vendor Panduit and another for inbound async from vendor Panduit. XI won't let me set up a sender HTTP channel. Why not?
Thank you in advance.

I have yet to figure this out, and probably need to go back to my Integration Repository setup since my problems may start there. This screenshot shows my Repository objects.
http://webpages.charter.net/kpwendel/intProcess.jpg
HELP! These are the steps I took, with questions embedded.
(1) Created data type and message type for xml document (note that same format is used for request and reply).
(2) Created PANRequestAbstractInterfaceSync (abstract and sync) for first part of Integration Process. Should the input message be the RFC or XML message type?
(3) Created PANRequestAbstractInterfaceAsync (abstract and async) for 2nd part of Integration Process.
(4) Created PANResponseToBPM_MessageInterface (outbound async) for interface back into XI from partner. Is this needed?
(5) Created PANHotkeySync_to_Async_IntProc Integration Process to handle sync to async bridge.
- Wondering why PANRequestAbstractInterfaceAsync is the only message interface available when I make container object (PANMessage)?
(6) Created two Message Mappings to handle RFC data to XML mappings (outbound RFC-> XML and inbound XML -> RFC).
(7) Created Interface Mapping that includes both the Request and Response message mapping programs from step six. Source is the RFC and Target is PANRequestAbstractInterfaceSync.
- Do I need another interface mapping with Source being PANRequestAbstractInterfaceAsync and Target being the RFC?
Link to these steps and app diagram:
http://webpages.charter.net/kpwendel/PAN_Hotkey_Diagram.jpg
Thank you very much for your time.

Help with Timing and BPM

Hey im fairly new to logic pro. I'm trying to find out how to record and keep the instruments in the speed that i played them.
The thing is when i start recording ill play a drum pattern at 80 BPM but when i play it back its all out of order and completely different timing than how i recorded it. I'm sure its something i havent checked or i need to uncheck but i cant find it in the help.
Also where do i control the BPM manually? any help is appreciated. Thanks to all who help.

Hello,
So I suppose this means that you do not want me to try it out, not today, but later on?
I publilshed a couple of articles about advanced actions in CP5.
BTW did you try to spread what you want to achieve over different slides? It will perhaps be easier to achieve.
Lilybiri

Help with containers

This is my first time posting for assistance in a forum like
this so I will do my best to articulate the problem the best I can.
I am building a Flash website using AS 2. I have built a
couple drop down menus that animate in and out. In these menus I am
attempting to make buttons that can be clicked on and will animate
in another box of information. As I have it now, you can click on
them and the box will animate in. The new box will stay in its
location until you roll off of the drop down menu.
I figure this happens because the button is part of the menu
and the new animated box is buried in the button that is part of
the larger whole of the drop down menu.
I have assumed that the solution to get the box to stay there
even after the menu is gone is to use a container type feature.
My question would be,
1. Is this a correct solution?
2. If so, where can I learn to do this?
I am amateur at best when it comes to action-scripting so I
do not know what sort of coding information would be necessary to
make this sort of function work.
Any help is greatly appreciated.

I'm not really sure how you have it all tied together, but it
sounds like the box is part of the submenu. If the box is the
content that the submenu selection will produce, then the box
should probably be separate from the submenu.

Need help with Berkeley XML DB Performance

We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
          XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
          xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
     XmlIndexSpecification spec = container.getIndexSpecification();
     // ids
     spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // index to cover AttributeValue/Description
     spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
     // cover AttributeValue/@value
     spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // item attribute values
     spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // default index
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // save the spec to the container
     XmlUpdateContext uc = xmlManager.createUpdateContext();
     container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
     No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]

Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query     { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig

Urgent help with BPEL process

Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thanks,
Dps

Read the Demo examples given with Oracle BPEL Process Manager.
I am now at a proficient level in BPEL in the past 1 year,
still need to reach the excellent mark.
Thanks & Regards,
Gopal D. Kalsekar
Sr. Software Developer
Business Solutions (eGroup)
M.H. Alshaya Company W.L.L.
www.alshaya.com
Jai Maharashtra
P :- (965) 224 3598
F :- (965) 224 2488
E :- [email protected]

Urgent help with simple BPEL process for reading data from database

Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thx,
Dps

I have created a table in Database with data like Empno,name,salary,comments.
I created Database Connection in jsp page and connecting to BPEL process.
It initiates the process and it goes automatically for approval.
Please refer the code once which i created.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="java.util.Map" %>
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
<%@page import="javax.naming.Context" %>
<%@page import="java.util.Hashtable" %>
<%@page import="java.util.HashMap" %>
<%@ page import="java.sql.*"%>
<%@ page import= "jspprj.DBCon"%>
<html>
<head>
<title>Invoke CreditRatingService</title>
</head>
<body>
<%
DBCon dbcon=new DBCon();
Connection conn=dbcon.createConnection();
Statement st=null;
PreparedStatement pstmt=null;
Hashtable env= new Hashtable();
ResultSet rs = null;
Map payload =null;
try
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
env.put("java.naming.security.principal", "username");
env.put("java.naming.security.credentials", "password");//bpel console
Locator locator = new Locator("default","password",env);
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
// construct the normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
java.util.HashMap map = new HashMap();
st=conn.createStatement();
out.println("connected");
String query1="Select * from EMPLOYEE";
rs=st.executeQuery(query1);
/*reading Data From Database and converting into XML format
so that no need of going to BPEL console and entering the details.
while (rs.next()){
String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
"<Empno>"+rs.getString(1)+"</Empno>"+
"<EmpName>"+rs.getString(2)+"</EmpName>"+
"<Salary>"+rs.getString(3)+"</Salary>"+
"<Comments>"+rs.getString(4)+"</Comments>"+
"</AsynchBPELProcess1ProcessRequest>";
out.println(xml1);
nm.addPart("payload", xml1 );
// EmployeeApprovalProcess is the BPEL process in which human task is implemented
deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
// payload = res.getPayload();
out.println( "BPELProcess CreditRatingService executed!<br>" );
// out.println( "Credit Rating is " + payload.get("payload") );
//Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
catch(Exception ee) {
//("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
%>
</body>
</html>
Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this.

Async-Sync scenario with out using BPM

Hi All,
With SP19 we can implement File-RFC-File scenario with out using BPM.
But can any one suggest how can I implement the following File-RFC-File scenario without using BPM.
My input file has five elements. A1,A2,A3,A4,A5
The RFC (BAPI) needs A2 and A3 as input and it produces the output R6.
Now in the destination I need to populate D1,D2,D3,D4,D5,D6.
D1 has to be mapped from A1 and so on till fifth element. D6 will be mapped from R6. In order to achieve this we need to store the value of source interface before calling the RFC so that when we get the response back we can populate the entire destination structure.
Can anyone advise how to go about it. I don't want to use a BPM here.
Thanks
Abinash

Hi
the following thread may help you
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File - RFC - File without a BPM - Possible from SP 19.
Thanks,
Ram

To create an asynch - synch - asynch flow with XI, without BPM

I would like to create an asynch -> synch -> asynch flow with XI,
without BPM.
The solution with RequestResponseBean and ResponseOnewayBean modules in
the File sender communication channel works fine.
But now I would ask you how can I do if my sender is R/3, with IDocs?
Because we cannot use modules in the IDoc sender communication channel,
and I don't want to use BPM.
Could you help me?
Thanks in advance,
Ram.

/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Refer to this blog. You may find a way out.
Alternatively, I would rather know the reason behind you not using BPM.Coz its the best way to acheive the desired result.

What do *you* need to know to be successful with Workflow and BPM?

All,
The Workflow and BPM Survey, sponsored by ASUG - but not limited to ASUG members - will close on October 24.
This information will be shared (with identifying characteristics removed) with ASUG, DSAG, VNSG, and SDN-ers to help target areas in which the various user groups and SAP can target upcoming webcasts and presentations.
You do not need to be an ASUG member to fill out this survey! All responders are welcome, and as is usually the case with a survey, the written-in responses are very valuable.
Although this survey asks for name and company affiliation, all identities will be kept confidential.
Please help us (SAP, SDN, ASUG, other user groups) help you, by telling us about what you need to see for educational content.
http://ws.asug.com/ss/wsb.dll/5/ASUGSAPworkflowBRMsurvey.htm
Please feel free to share this link with other WF/BPM Professionals. The survey will close on October 24, 2008.
Thanks for your input!
Sue

It's a XYZ stage. I have a COM dll to use it. I did an instrument from this dll and everything was working fine untill I uninstalled LabWindows. IVI shared components seems to be having problems as I coundn't uninstall it when I tried to do a clean reinstallation. Maybe the issue comes from there..
I am using the error variables and the error pop up does pop up but no other "system" error as IVIdll is missing or something like this..

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Help with containers in BPM

Similar Messages

Maybe you are looking for