Help with exporting an excel spreadsheet to sharepoint

I've downloaded the 'Synchronising with sharepoint lists' add-in and have linked my spreadsheet to a sharepoint list, where any changes made to the spreadsheet then updates the sharepoint list. This spreadsheet is full of formulas but as soon as I click
'synchronise with sharepoint' all of the formulas in my spreadsheet vanish. There are also no formulas in the sharepoint list but I'm not really bothered about having working formulas in my sharepoint list because I will be updating that list through my formula
filled and rather complicated spreadsheet.
So is there a way that I can synchronise my spreadsheet to sharepoint and keep my formulas in my excel spreadsheet?

Hi Sarah,
It is difficult to answer your question without any knowledge of the calculations in your Excel spreadsheets. Not all calculations that work on your desktop excel application will work on SharePoint Excel services which is why some of your formulas are getting
extracted.
For more information about Excel Services in SharePoint you can refer to
http://msdn.microsoft.com/en-us/library/office/ms517343%28v=office.14%29.aspx
Daniel Christian (MCTS)

Similar Messages

Issue with export in Excel in WAD

Hi
I have an issue with export to excel in WAD. I have a web template with two or more tabs.
On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
can anyone help / give a clue what to look for.
br,
John
Edited by: John Dolph on Apr 15, 2010 10:50 AM

Hi
Sorry I has been a while but the problem still occurs,
I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
<bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
            <bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
                <bi:BUTTON_LIST type="ORDEREDLIST" >
                    <bi:BUTTON type="COMPOSITE" index="2" >
                        <bi:CAPTION value="EXCEL" />
                        <bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
                        <bi:ACTION type="CHOICE" value="INSTRUCTION" >
                            <bi:INSTRUCTION >
                                <bi:EXPORT >
                                    <bi:ITEM_REF_LIST type="UNORDEREDLIST" >
                                        <bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
                                        <bi:ITEM_REF index="2" value="TAB_A_CHART" />
                                        <bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
                                        <bi:ITEM_REF index="4" value="TAB_B_CHART" />
                                    </bi:ITEM_REF_LIST>
                                    <bi:EXPORT_FORMAT value="XLS" />
                                </bi:EXPORT>
                            </bi:INSTRUCTION>
                        </bi:ACTION>
                    </bi:BUTTON>

Please help! Will iWorks Numbers work with XLS or Excel Spreadsheets

A friend of mine wants me to make her a spreadsheet and I use a PC with MS Office Excel. My question is... Will she be able to use and view a .xls spreadsheet on her new Mac? She has either Iworks Numbers 2008 or 2009. I'm not absolutely sure. I know it's a new computer. The spreadsheet will be fairly basic and the formulas will be simple addings for misc. expenses.
Please let me know if this will work.

Thanks! The spreadsheet I made is a basic list for expenses that automatically adds the entered amounts in each column to sum up the individual expense. I also have a column on the right that adds the amounts entered in each row. Lastly I have one cell which provides a grand total of all expenses combined.
From your reply I'm afraid I will have to make a road trip. As my friend lives quite a distance from me. I was hoping to simply create and email the Excel file to her. With my formulas to you think they will conflict with Iworks Numbers? How much different is Mac Numbers to Excel? I have never seen or used it. The formulas I used are simple =SUM(X:X)formulas and the first calculating cell I have set is not A1 but D4 etc.
I'm sorry to have so much to ask but will the layout stay the same and what will happen to any protection settings I set?
Thanks again for all your time and help to everyone who replied! It's much appreciated!

I am not seeing export to Excel option in SharePoint 2013 survey (even in the overview view mode)

Hi
If anyone could point me in the right direction as to what steps to take to enable the export to excel option in a sharePoint survey list.
all other surveys are showing up that export to excel option.
I am not seeing the view dropdown as well which shows up on right (the only way to create new view is through the URL as of now)
Constraints
Survey already has several responses now so making a new survey is not an option
(I know that when is any custom view is changed to default view and if Overview is made as the default view again this option goes away, but how to get this export to excel option back?)
Steps taken till now
Checked in SP designer as to which field is set to default and it shows overview as the default.
Checked whether any web part was closed and it seems there was none else closed web part category would've shown up
Saved the existing survey as template both with the content included and without the content (without the content template has the export to excel option showing up)
Many thanks ,
Ab

Aby,
Do following, it will work
Create a simple list and hit export to excel to create owssvr.iqy file
Open that file in notepad
Collect Survey list' GUID and View GUID from SPD. You need to change the pointer to test list to survey
Change list GUID and view Guid
File will contain these code
WEB
1
https://mycomp.sharepoint.com/sites/RND/_vti_bin/owssvr.dll?XMLDATA=1&List={577F5EF1-DA61-4BAD-B912-E16CEFD72AE2}&View={05CF5C6B-92F0-4681-BC4A-F60E2646A41D}&RowLimit=0&RootFolder=%2fsites%2fRND%2fReports%20List
Selection={9CC32EE5-7C16-49EE-9BA1-136C1ADBEBEF}-{2D172036-F4BF-459D-BBAB-4FEE3310511D}
EditWebPage=
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
SharePointApplication=https://mycomp.sharepoint.com/sites/RND/_vti_bin
SharePointListView={05CF5C6B-92F0-4681-BC4A-F60E2646A41D}
SharePointListName={577F5EF1-DA61-4BAD-B912-E16CEFD72AE2}
RootFolder=/sites/RND/Reports List
It will work :)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Help with exporting data from pdf form

I have about 100 pdf forms that I created in adobe forms central and distributed as a pdf form (rather than on the web). I am trying to export the data into a spreadsheet but when I export it, the fields are all jumbled in the csv file, as in they are not in the same order. I need to export the data all together so I'm going to the forms menu and selecting "manage form data" and then selecting "merge data files into spreadsheet". I tried exporting a single file but that gave me something really weird.
Please help, I have a deadline next week to analyze this data and can't make sense of it once it is exported to a spreadsheet.

Would you please share your form with me and send me one of your pdf forms and some of the csv files?
You can share your form by doing the following:
1. Click on the “Share” icon on the bottom left corner.
2. Click on “Add Collaborator” on the popup menu.
3. Enter [email protected] under “People to share with”.
4. Set subject to "Export data from pdf form"
5. Click the “Share” button on the bottom right of the dialog.
Thanks
Ken

Help Regarding Exporting to Excel format Crystal Report XI SP5

I am trying to export a report in MSExcel format but when i do so it gives me an error that the following export format is not supported or recognized ......
I am able to export into PDF, RTF and CSV (Server Side Only) formats .
Here is the code i am using provided on the business objects help site :
<%
     // Working for all but exporting to Excel and Text
     IReportSource reportSource = (IReportSource)session.getAttribute("reportSource");
     session.setAttribute("reportSource", null );
     ReportExportControl exportControl = new ReportExportControl();
     //Object reportSource = session.getAttribute("reportSource");
     System.out.println(exportControl.getName());
    exportControl.setReportSource(reportSource);
    ExportOptions exportOptions = new ExportOptions();
     exportControl.setExportAsAttachment(true);
     exportControl.setName("Excel");
     //exportControl.setOwnForm(true);
     //exportControl.setOwnPage(true);
     String selectedFormat = "2";
     if(selectedFormat.equals("0")/Crystal Report/){
          exportOptions.setExportFormatType(ReportExportFormat.crystalReports);
     else if(selectedFormat.equals("1")/Word/){
               exportOptions.setExportFormatType(ReportExportFormat.MSWord);
     else if(selectedFormat.equals("2")/Excel/){
               exportOptions.setExportFormatType(ReportExportFormat.MSExcel);
     else if(selectedFormat.equals("3")/Rich Text Format/){
               exportOptions.setExportFormatType(ReportExportFormat.RTF);
     else if(selectedFormat.equals("5")/PDF/){
               exportOptions.setExportFormatType(ReportExportFormat.PDF);
     else if(selectedFormat.equals("6")/Excel without formatting/){
               exportOptions.setExportFormatType(ReportExportFormat.recordToMSExcel);
     else if(selectedFormat.equals("7")/Text/){
               exportOptions.setExportFormatType(ReportExportFormat.text);
     else if(selectedFormat.equals("8")/editable RTF/){
               exportOptions.setExportFormatType(ReportExportFormat.editableRTF);
     else if(selectedFormat.equals("9")/Server Side CSV/){
               ReportClientDocument reportClientDoc = (ReportClientDocument)session.getAttribute("rptDoc");
               PrintOutputController printOutputController = reportClientDoc.getPrintOutputController();
               ByteArrayInputStream byteIS = (ByteArrayInputStream) printOutputController.export(ReportExportFormat.characterSeparatedValues);
             byte[] buf = new byte[2000 * 1024];
             int nRead = 0;
             response.reset();
             response.setHeader("content-disposition", "inline;filename=example.csv");
             response.setContentType("application/csv");
             while ((nRead = byteIS.read(buf)) != -1) {
                 response.getOutputStream().write(buf, 0, nRead);
             response.getOutputStream().flush();
             response.getOutputStream().close();
    if (!selectedFormat.equals("9")/Don't use the export control for CSV/){
               exportControl.setExportOptions(exportOptions);
               Fields parameterFields = (Fields)session.getAttribute("parameterFields");
               exportControl.setParameterFields(parameterFields);
               ConnectionInfos oConnectionInfos = (ConnectionInfos)session.getAttribute("oConnectionInfos");          exportControl.setDatabaseLogonInfos(oConnectionInfos);
        exportControl.processHttpRequest(request, response, getServletContext(), null); //getServletConfig().getServletContext()
       // exportControl.dispose();
%>
And if it isn't possible to export to excel then how can i isolate the report/page header sections in CSV format so that i can atleast get headings in the CSV file ..
Please help me out with This as i am stuck on this for some time now !!

Only if you export to OfficeHTML or OfficeMHTML and then open with Excel
Wayne Van Sluys
TopDown Consulting

Help with exporting and image size or boundaries?

I am trying to slide the cat into the scene a little at a time foir an animation project I am working on. However, when I export the image the back ground of the image expands with a checkered back ground( showing here in white) and shows the whole cat.
How do I just show a little of the cat on the image at a time when exporting. I am trying to give the impression that the cat is walking into the room. I do not want to have to cut the cat up.
I would be thankful for any suggestions.

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Help with exporting Deski to text file via Web Intelligence

We are currently converting from BO version 5 to BO XI rev2. I have a report that must be scheduled to a flie in plain text format. I am using a deski report. When I save as to text, the file is fine. When I schedule it in webi, the file seems to be missing the end of line character for each row in the table, so it cannot be used for an import to another program. Can anybody help with this?-

well, in that case you need to determine if this issue only happens with a perticular report or all of them, if it happens only with reports imported from 5.x or with newly created reports as well.
Looks like it is happening only when report is exported from Infoview, not in the Deski client. This might indicate a problem at the Web Apllication server (tomcat or one you use).
If this issue is happening with any report - it might be a bug. In that case you have no options as there are no more patches for XIR2.
On the other hand - if all you need is to extract data for consumption in another tool , why not use Data integrator instead ?
Also, if this desn't work in Deski - does it work if you convert your reports to webi and export from those ?

Need help with Export workflow.

Hello again.
Today I was experimenting with exporting a project using Export QT Movie and QT Conversion.
My goal is to show a QT project on the web, either 640x480 or 320xx240, depending on how monstrous the file size is.
My initial impression was that export QT Movie simply generates (I'm guessing) a full size rendering of the project. It's icon is a FC icon. What I did then was an "Open with..." quicktime(pro). This is where I get confused: I know that the next steps are for for preparing the project for sizes, compressions and so on. The export to QT movie seems to be a longer route to get to the settings that you need to use in QT Conversion, which after selecting QT conversion, you have the Format, Use, and Options settings.
Am I right so far?
Some background about my project- Easy setup= DV-NTSC. If I look in my browser, my clips are 720x480, 29.97fps, Compressor(?)DV/DVCPRO-NTSC, pixel aspect ratio, NTSC-CCIR 601 and anamorphic is checked.
I also have still photos motion control stuff, PS tiffs, that do not have anamorphic checked.
Form here on is where I get confused.
Under settings, I am selecting DV/dvc-NTSC for compression frame rate 29.97, medium compressor, scan mode, interlaced, and aspect 4:3.
The filters setting I don't use.
The size setting I'm trying 320x240 with aspect ratio and de interlace video UNCHECKED.
Is this a good workflow for the web. I notice on 640x480 my titles (livetype) seem kind of jagged.
Any help preparing a project for the web would be appreciated. If you need more info let me know.
Thanks so much.
Jonathan

Thanks for the additional comments and ideas.
In terms of profile, as I mentioned, the intermediates will be going off to the editor (off-site) for editing on his FCP suite. I'll stick to working in the prescribed HDTV (Rec. 709) space, and I've given him all the detail I can of how I'm working, but crucially I haven't stood at his edit-suite to see how the stuff looks.
But, he's no newbie, so I'm hoping it'll be OK.
Blasted shame about the H.264 BluRay not being compatible with QT - I thought I had this whole issue beat until that came along. It's not a matter of disk space here, but the editor is mithering that the intermediates we are testing, in either PNG, or Animation, and a couple of others, are choking his playback.
I'm not sure what to say about that, other than to go down this road of trying to squish these intermediates as low as possible without wrecking the look, hence finding that the DNxHD is providing the best solution. If it had been a SD project, I might well have tried the native H.264, even over our normal PNG workflow.
So what will play the native H.264 BluRay compressed output?
Julian.

Help with export with query option

I need help with an export with query option.
I have a script that includes the following
auddate=`date '+20%y%m%d'`
file="cal_shrlgpa"$auddate".dmp"
exp / file=$file tables=shrlgpa query\=" where shrlgpa_pidm in (Select sztahbr_pidm from purdue.sztahbr where sztahbr_to_extract\=\'Y\' and sztahbr_export_status\=\'N\')\"
echo 'cal export file created:'$file
when I run the script, I get the following error:
cal_export_tables.sh[7]: 0403-057 Syntax error at line 7 : `"' is not matched.
Can somone help me with the query option?

I made the suggested change:
exp / file=$file tables=shrlgpa query=" where shrlgpa_pidm in (Select sztahbr_pidm from purdue.sztahbr where sztahbr_to_extract=\'Y\' and sztahbr_export_status=\'N\')"
and got the following error:
LRM-00116: syntax error at 'sztahbr_to_extra' following 'where'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
Shannon

Help with exporting to an Excel spreadsheet

Greetings!
I would first like to say that I am a student working on a
data acquisition system for a company I have an internship with. I have used LabVIEW in classes a lot but have
very limited experience in creating VIs on my own
(this is the first time Im doing this without a specific guide as I had in
class). This VI will be used to monitor
the efficiency of an air pollution control system so it will be running
continuously for a few days at a time so there will be a lot of data points. The company I work for would like the VI to record
the data from each signal every 30 secs or so to the same excel file with the
time/date the reading was taken included in each row. So far the VI uses the DAQ
assistant to take in data from temperature, humidity, and pressure thermocouples
and displays the readings on the front panel.
That part is fine, but as you know it doesnt export the data. The only thing I have tried that has worked
is the "Write to Measurement File"
way of doing this, but the format it puts the data in is not practical
for analysis as it has a lot of extraneous information included with every
reading. Another problem that I have run
into is trying to split up the VI so I can have real-time readings on the front
panel, but have the delay of taking samples that are exported to the text file. My idea is to put the signals and front panel
gauges in its own while loop and then the file exporting part of the VI inside
its own while loop with the "Time Delay" icon. To me all of this seems like it should be
very simple to fix, but my lack of experience with LabVIEW is really hampering
my progress. Hopefully someone can
help. Thank you!
~Dustin
The following is the VI I have worked on so far. Thanks again
Attachments:
DAQ1.vi ‏340 KB

One additional thing to note is that the latest code that was posted didn't actually write to an Excel file. It wrote to a file that you can open with Excel - after wading through a dialog box that tells Excel how to read it. Depending on what you are wanting to do with the data next, this is a potentially significant distinction.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Help with exporting forms based data to Excel 2007

I have a user who is attempting to export forms based data to Microsoft Excel 2007 and when he attempts this he receives a message stating that Windows does not recognise this file type (tsv). I am not too familiar with Office 2007 so I am unable to direct this users as to how to correct this issue.
Is someone able to give me the navigation path to help me to assist this user? thanks

Did you verify the file type from Windows Explorer?
1) Right click on My Computer > Explore
2) Go to Tools > Folder Options
3) Click on File Types tab
4) Check if TSV file is defined there or not. If it is not there, click on New and add the File Extension

Problem with Export to Excel from ALV view.

Hello @all,
i have a problem on my webdynpro application. I use the component SALV_WD_TABLE. I become display my data but when i want to export the table to ecel, i became a short dump with the message in the browser: Access via 'NULL' object reference not possible.
When i look at ST22. The system show this text.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_SALV_WD_A_MODEL_TABLE======CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was no
     caught in
    procedure "IF_SALV_BS_MODEL_COLUMN~GET_HEADER_BIND_DDIC_FIELD" "(METHOD)
     was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LR_HEADER").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
    "CL_SALV_WD_A_MODEL_TABLE======CP" or "CL_SALV_WD_A_MODEL_TABLE======CM0
    "IF_SALV_BS_MODEL_COLUMN~GET_HEADER_BIND_DDIC_FIELD"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
The exception must either be prevented, caught within proedure
"IF_SALV_BS_MODEL_COLUMN~GET_HEADER_BIND_DDIC_FIELD" "(METHOD)", or its
possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Information on where terminated
    Termination occurred in the ABAP program "CL_SALV_WD_A_MODEL_TABLE======CP" -
     in "IF_SALV_BS_MODEL_COLUMN~GET_HEADER_BIND_DDIC_FIELD".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 19
    of the (Include) program "CL_SALV_WD_A_MODEL_TABLE======CM030".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "IF_SALV_BS_MODEL_COLUMN~GET_HEADER_BIND_DDIC_FIELD" "(METHOD)", but
     it was neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "CL_SALV_WD_A_MODEL_TABLE======CP "; its source
     code begins in line
    1 of the (Include program "CL_SALV_WD_A_MODEL_TABLE======CM030 ".
Source Code Extract
Line SourceCde
    1 method if_salv_bs_model_column~get_header_bind_ddic_field.
    2
    3   data:
    4     ls_column type if_salv_bs_model_columns=>s_type_column.
    5
    6   ls_column = me->if_salv_bs_model_columns~get_column( column ).
    7
    8 *... get column
    9   data:
   10     lr_column type ref to cl_salv_wd_column.
   11
   12   lr_column ?= ls_column-r_column.
   13
   14   data:
   15     lr_header type ref to cl_salv_wd_column_header.
   16
   17   lr_header = lr_column->get_header( ).
   18
>>>>>   value = lr_header->get_ddic_binding_field( ).
   20
   21 endmethod.
i hope anybody can help me.
Regards
Chris

Dear
How you resolved this issue please let us know.
Thanks

Issue with Export To Excel Feature

Hi,
I have a OAFramework Page, which is having a table region. Have also created an 'Export Button' as table action for this table, to export the data to csv file. The View Instance that is associated with this table has a query already set/defined in the VO definition, in my code based on certain conditions I am changing the view object's query using setQuery() Method.
The data displayed in table changes as per the query modifications, however the data that I get in the Excel/csv file is the same (i.e. the same data i get with the query already defined while creating the view object).
Any idea, what changes i need to make inorder to make this work? Guess the query changes are not getting reflected for the export button click?
Thanks
Puja

Yes, whenever this VO is accessed, you will face the performance issue. As VOs' are maintained through AM pool, until the AM is released, the corrsponding VO's memory foot print will be there in the middle tier.
And if you have less resourse at middle time, it surely will affect other users because someone else is hogging the resource.
--Saroj

Help with exporting Minecraft video

Hello. My name is Reynir Aron. I make Minecraft videos and I recently switched from Final Cut Pro 7 to Premiere Pro CS6 and I love using Premiere.
However there is one little problem, when I export the video (even if I do it through Media Encoder) the video looks very smoothed out (for example the text looks really crappy and isn't pixellated).
Can anybody help me? The video is not being scaled up, the source video, my sequence and the export settings are all 1280x720.
By the way, is there any plugin or anything that lets me export using QuickTime Pro 7?
Here is a screenshot of the output I get:
This also happens if I check "Use Maximum Render Quality".
This is what I see in Premiere's Program window:
I have an iMac8,1 (Early 2008) with a 2,8GHz Intel Core 2 Duo, 4GB 800 MHz DDR2 SDRAM, an ATI Radeon HD 2600 Pro 256 MB and I'm running OS X Mountain Lion 10.8.2.

I think my daughter is using FRAPS, but of course not transcoding, just putting that right into Premiere. If your captured file is 30fps, what is the transcoded ProRes file? I don't know if ProRes supports non-video settings, so maybe that is converted to 29.97? But then the edit sequence is 30fps, and I do see an issue - FIELDS is set to LOWER, but should be PROGRESSIVE. That could be causing the jaggies issue on your output.
How did you create the editing Sequence? Try creating a NEW SEQUENCE with the same settings, except make it Progressive, then copy/paste contents of interlaced sequence into the progressive sequence and then Export again, see if that helps. Or just do a short sample to check, to save time.
Thanks
Jeff

Help with exporting an excel spreadsheet to sharepoint

Similar Messages

Maybe you are looking for