Help with forced new start / Kernel panic
Hello everybody,
recently our iMac crashed twice and had to be restarted. This is the error code.
Can anyone help us out?
Greeings,
Grischa
Anonymous UUID: 2FC5334B-47E2-CC3C-E1AB-DDFE18AF61D8
Mon Feb 9 02:12:54 2015
panic(cpu 2 caller 0xffffff80014dc43e): Kernel trap at 0xffffff7f83cb2c9b, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000004300000007, CR3: 0x00000001357e00cb, CR4: 0x00000000000606e0
RAX: 0x0000004300000006, RBX: 0xffffff802d5b3ab0, RCX: 0xffffff7f83cb2c06, RDX: 0xffffff802b6ded40
RSP: 0xffffff825dd9b8c0, RBP: 0xffffff825dd9b910, RSI: 0x000000008020690c, RDI: 0xffffff803749ee08
R8: 0x0000000000000000, R9: 0x0000000000000210, R10: 0x0000000000000230, R11: 0x0000000000000206
R12: 0x0000000000000066, R13: 0x0000000000000002, R14: 0xffffff802d5b3ab0, R15: 0x0000000000000066
RFL: 0x0000000000010286, RIP: 0xffffff7f83cb2c9b, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000004300000007, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff825dd9b550 : 0xffffff8001422f79
0xffffff825dd9b5d0 : 0xffffff80014dc43e
0xffffff825dd9b7a0 : 0xffffff80014f3976
0xffffff825dd9b7c0 : 0xffffff7f83cb2c9b
0xffffff825dd9b910 : 0xffffff7f83cb435e
0xffffff825dd9b950 : 0xffffff800162c1cf
0xffffff825dd9b9a0 : 0xffffff80016a59a8
0xffffff825dd9ba10 : 0xffffff80016a4c2a
0xffffff825dd9bb20 : 0xffffff80016a3302
0xffffff825dd9bcd0 : 0xffffff8001623dac
0xffffff825dd9bda0 : 0xffffff800162579f
0xffffff825dd9bdd0 : 0xffffff80017f7cab
0xffffff825dd9be10 : 0xffffff80017c18d3
0xffffff825dd9be40 : 0xffffff80017f3256
0xffffff825dd9bf50 : 0xffffff8001840c63
0xffffff825dd9bfb0 : 0xffffff80014f4176
Kernel Extensions in backtrace:
net.tunnelblick.tun(1.0)[576DEDE7-B6C1-610E-B7E4-C54DBDA631AF]@0xffffff7f83cb20 00->0xffffff7f83cb7fff
BSD process name corresponding to current thread: ifconfig
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000001200000
Kernel text base: 0xffffff8001400000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 26923026304386
last loaded kext at 2982999585774: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f821e9000, size 24576)
loaded kexts:
net.tunnelblick.tun 1.0
com.sony.pci.SxS 1.0
tc.tctechnologies.driver.Saffire 4.1.4 18735
com.rim.driver.BlackBerryUSBDriverInt 0.0.67
com.apple.driver.AppleUSBCDC 4.2.1b5
com.apple.filesystems.smbfs 2.0.3
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.filesystems.msdosfs 1.9
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.iokit.IOBluetoothUSBDFU 4.2.7f3
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleBacklight 170.4.11
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.AMDRadeonX3000 1.2.4
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleFireWireStorage 3.4.1
com.apple.driver.initioFWBridge 3.4.1
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.4.1
com.apple.driver.LSI_FW_500 3.4.1
com.apple.driver.Oxford_Semi 3.4.1
com.apple.driver.StorageLynx 3.4.1
com.apple.driver.AppleRAID 4.0.6
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.7f3
com.apple.driver.AppleMultitouchDriver 245.13.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMC 3.1.8
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
net.tunnelblick.tun1.0
com.sony.pci.SxS 1.0
tc.tctechnologies.driver.Saffire 4.1.4 18735
com.rim.driver.BlackBerryUSBDriverInt0.0.67
It may be one of these 3rd party applications. Try un-installing them according to the developer's un-install instructions.
Similar Messages
-
Help with a new start on new laptop
I have a new laptop and have installed my ipod and itunes from the disc but I don't know how I get all my music from the ipod to the new itunes that opens up, Help! please
If you installed iTunes from an old physical "disc," you should go here and download the latest version of iTunes instead.
http://www.apple.com/itunes/
Any version of iTunes that comes on a disc would be very old, and may not work properly with WIndows 7.
For your actual question, iTunes syncing is generally in one direction, from your iTunes library to the iPod. You cannot use iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do an Internet search on something like "ipod transfer," you should get some links. (The CNET article seems to be popular.)
Once the song files are on you computer's drive, you can add them to your new iTunes library. -
Need a little Help with my new xfi titanium
+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help../Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard. -
Forced restart and kernel panic at hibernation
Hey Folks!
My MacBook forces a restart (with grey screen and the corresponding message) and indicates a kernel panic every time I send my MacBook to hibernation. The restart then works perfectly fine. Does anyone have a clue, what the reason for this might be?
Best regards from Stuttgart,
Torsten.
Message was edited by: toscho72Hi Carolyn,
You may probably the one that can help me out.
I bougth a Mac Os X Leopard just 9 months ago. The first 4 months the new computer was still packed (because we were abroad).
So just a few months ago we opened the package, started the computer and we were happy to see it working. After a while, however, the computer oes not act to any command any more. A little round circle can be seen on the screen (with different colours inside and spinning wheel).
A forced stop does not work. So the computer needs to be shut down and then restart it. Sometimes, after restart, it makes strange bleeps after each second and the computer does not start up.
A few weeks ago the computer was taken from our home in order to investigate the computer (a company names Card Benelux: very impolite people) and a new hard-disc was inserted.
Now, the same problem is there again: the spinning wheel after some time working on the computer.
Do you know what this is? It seems that the company selected by Mac did not know how to solve the problem.
Sincerely yours,
Marcel -
I've got a brand new iMac, which frequently crashes, and blames the kernel_task, coreaudiod, FileStatsAgent, PluginProcess or Rome Total War.
I've included the most recent kernel panic.
I've run the dianostics, which came back clea, no issues ( Does this mean I'm out of the woods regarding hardware issues? ).
Any help appreciated.
Anonymous UUID: 2CB87A9C-CBB8-90BA-7A23-0C7285178D9F
Sat Mar 1 19:19:08 2014
panic(cpu 6 caller 0xffffff80050dbe2e): Kernel trap at 0xffffff8005017ca4, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000066, CR3: 0x0000000007c96000, CR4: 0x00000000001606e0
RAX: 0x0000000000000013, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0xffffff8043ed75a0
RSP: 0xffffff8392643b50, RBP: 0xffffff8392643b50, RSI: 0x0000000000000013, RDI: 0xffffff8043ed75a0
R8: 0x0000000000000018, R9: 0x0000000000000018, R10: 0xffffff7f86e36220, R11: 0xffffffffffffffff
R12: 0x0000000000000013, R13: 0xffffff8046b01800, R14: 0x0000000000000013, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff8005017ca4, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000066, Error code: 0x0000000000000002, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff83926437e0 : 0xffffff8005022fa9
0xffffff8392643860 : 0xffffff80050dbe2e
0xffffff8392643a30 : 0xffffff80050f3326
0xffffff8392643a50 : 0xffffff8005017ca4
0xffffff8392643b50 : 0xffffff8005014e78
0xffffff8392643ba0 : 0xffffff8005026f68
0xffffff8392643bd0 : 0xffffff80054ced03
0xffffff8392643be0 : 0xffffff80054cec67
0xffffff8392643c10 : 0xffffff7f86e31845
0xffffff8392643c30 : 0xffffff7f86e31489
0xffffff8392643c60 : 0xffffff7f86e2e7da
0xffffff8392643ce0 : 0xffffff7f86e2e9d3
0xffffff8392643d40 : 0xffffff7f8751b5ce
0xffffff8392643da0 : 0xffffff7f8643e0f6
0xffffff8392643de0 : 0xffffff7f8643e1b3
0xffffff8392643df0 : 0xffffff7f86438ecb
0xffffff8392643e20 : 0xffffff7f86438e45
0xffffff8392643e60 : 0xffffff7f864183dd
0xffffff8392643eb0 : 0xffffff7f8640fa38
0xffffff8392643ee0 : 0xffffff7f8640f9cf
0xffffff8392643ef0 : 0xffffff7f8640de09
0xffffff8392643f30 : 0xffffff7f8644cdf7
0xffffff8392643f50 : 0xffffff7f8644cda6
0xffffff8392643f70 : 0xffffff7f8644ce1c
0xffffff8392643f90 : 0xffffff7f8644cf10
0xffffff8392643fb0 : 0xffffff80050d6ff7
Kernel Extensions in backtrace:
com.apple.iokit.IOBluetoothFamily(4.2.3f10)[87FE20F9-499A-3125-B216-F9120B6D4AB 5]@0xffffff7f86408000->0xffffff7f864a4fff
dependency: com.apple.iokit.IOUSBFamily(675.4.0)[5C861553-BC5A-3979-A6B4-58C57879DD40]@0xff ffff7f85f29000
dependency: com.apple.iokit.IOReportFamily(23)[D203F7D3-47CA-382B-B401-8535CD4CBC49]@0xffff ff7f862b7000
com.apple.driver.AppleMultitouchDriver(245.13)[01E1A307-467C-32BC-90CA-04624BFE 3887]@0xffffff7f86e2c000->0xffffff7f86e42fff
dependency: com.apple.iokit.IOHIDFamily(2.0.0)[5D59740C-447F-37DA-B881-6F470878CF56]@0xffff ff7f85fff000
com.apple.driver.AppleBluetoothMultitouch(80.14)[4316CCE9-09F9-30E0-8454-0FA609 7498EF]@0xffffff7f87519000->0xffffff7f87526fff
dependency: com.apple.iokit.IOBluetoothFamily(4.2.3f10)[87FE20F9-499A-3125-B216-F9120B6D4AB 5]@0xffffff7f86408000
dependency: com.apple.iokit.IOHIDFamily(2.0.0)[5D59740C-447F-37DA-B881-6F470878CF56]@0xffff ff7f85fff000
dependency: com.apple.driver.AppleMultitouchDriver(245.13)[01E1A307-467C-32BC-90CA-04624BFE 3887]@0xffffff7f86e2c000
dependency: com.apple.driver.IOBluetoothHIDDriver(4.2.3f10)[E22B0FDD-0D9B-372B-8D9F-027BC5D D47F7]@0xffffff7f864b5000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000004e00000
Kernel text base: 0xffffff8005000000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 268542338321
last loaded kext at 15731793686: com.apple.driver.AppleBluetoothHIDKeyboard 170.15 (addr 0xffffff7f8727e000, size 24576)
last unloaded kext at 235987989997: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f87506000, size 8192)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.AGPM 100.14.15
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.GeForce 8.2.4
com.apple.driver.AppleIntelHD5000Graphics 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleIntelFramebufferAzul 8.2.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4360 831.21.63
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleUSBXHCI 670.4.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.14
com.apple.nvidia.driver.NVDAGK100Hal 8.2.4
com.apple.nvidia.driver.NVDAResman 8.2.4
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOAcceleratorFamily2 98.14
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.CoreStorage 380
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.iokit.IO80211Family 630.35
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GTX 775M, NVIDIA GeForce GTX 775M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3138362E4130304C4620
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3138362E4130304C4620
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3138362E4130304C4620
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x0198, 0x393930353432382D3138362E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD SD0128F, 121,33 GB
Serial ATA Device: APPLE HDD ST3000DM001, 3 TB
USB Device: FaceTime HD Camera (Built-in)
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: iMac, Apple Inc., 23.10Did this happen before 10.9.2? I have been having issues since 10.9.2 on my Early 2011 MBP and was able to definitively narrow it down to apple's graphics driver logic.
How did I come to this conclusion?
- Boot from my carbon copy cloner bootable backup and open an app that requires the discrete GPU (photoshop), gfxCardStatus indicates discrete GPU activated. Result: No problem
- Boot OS X without any startup items (If you have a problem with the automatic resume launching a discrete GPU requiring app before you get to quit .....hold SHIFT immediately after you start logging in)
- Open the same app under 10.9.2. Result : Screen flashes, gfxCardStatus indicates discrete active, OS X logs me out.
- Install standalone 10.9.2 package. Repeat steps. Result: SAME
- Create new account (in case it has to do with something I am not seeing). Repeat steps. Result: immediate logout (no extensions active etc on the new account)
So now i have a ton of kernel panics and crash reports from the window server from repeatedly testing different variations of my hypothesis. Conclusion: issue with automatic graphics swicthing.
So what I'm saying is it is possible that you do not have a hardware problem, but was just unlucky enough to get an iMac /w 10.9.2 on it. If that's the case then I would just recommend holding off for a lil 'till a fix is released. -
RAID mirror with software utility caused kernel panic every time
Using disc utility to make a mirror of 2 drives, click create and i get kernel panic and have to power off machine. if i try to start the machine with either of the two disks in it (together or individually) i get same kernel panic and have to power off.
The disks are in an external storage array (sonnet d500). I have a second storage array with raided disks in and i have raided disk inside the mac too. these all work fine..
originally 2 weeks ago i had the 2 disks working in a group of 4 disks set as a mirror of 2 striped disks. One disk in this setup failed and with this config you can never 'recover'or rebuild it - you get a degraded mirror and you can backup the data, but you must completely rebuild the raid again as the mirror of stripes never lets you add a new disk in again.period. not good.
I replaced the failed disk and rebuilt the mirror of stripes. this lasted a day until a second disk failed (all 4 were bought at same time so i was kind of expecting that to happen once one failed).
i replaced the second faulty hdd and thought about my disk usage and decided i would not make another mirror of stripes and i would make 2 mirrors instead for safe-ish storage and then transfer data to a striped raid set for editing from instead of direct from the mirror of stripes volume.
i tried to delete the raid but got a kernel panic
if i started the machine with any of the 4 disks i would get a kernel panic.
i moved the disks one by one into an older G5 running Tiger and managed to erase the raid info on 2 of them. The two new ones had some strange raid info and the Tiger machien thought there was an extra disk in the machine and would not erase or partition or allow me to destroy the raid whatever i tried.
I will be moving these now into an old XP PC to try to erase the boot records etc and erase them to be able to use them again in either mac pro or G5. painful..
so.. i ended up with 2 erased drives and have 2 new drives with dodgy raid info that causes kernel panics on the leopard machine and wont go in the Tiger machine.
The two erased drives are what ive now been trying to use in the mac pro to create a mirror - this now caused kernel panics when creating the mirror to start with and when installed in the machine at all. so i will be erasing them again in the tiger machine soon (its busy erasing with zeros another new disk that i added to the Tiger machine 2 weeks ago which seems to have some fault when raided!!! but thats another story).
so.. is anyone else having problems with creating basic mirror in 10.5.4 or is it just me??
i have a sonnet tempo e4p card with 2 external sata disk enclosures, latest firmware for the e4p card. all other previously existing raid volumes are working fine. i have one set of 2 striped disks, one set of 3 striped disks and one set of 2 stripes which are mirrored - all happy and working fine. but i cant make a new mirror of 2 disks...
I phoned Apple support and they said all raid info was kept on the disk itself and nothing on the actual machine and suggested i take the machine to an apple care centre for some tlc (although its disk i am having a problem with). since all my other disk arrays work fine i don't really want to rebuild the whole machine from scratch if i can avoid it.
Any suggestions of what i can try ??well it turns out the new disk i bought just werent any good. my g5 powermac raid mirror issue was related to one new disk with lots of bad blocks (speed tools showed that up) so i have learnt my lesson on cheap non raid disks for raid..
am waiting on a couple of new ultrastar enterprise disks to tuen up so i can go back to the macpro and try to add a mirror again.
i am still stuck wih several new disks that i cannot format now in the macpro on leopard or on the g5 powermac with tiger.
ive tried softraid and that cant do it, speedtools pcformat util cant do it, disk utility crashes when i try to eras them and diskutil from termianl starts then doenst get anywhere and my pc sata card doesnt work so my last resort pc option still doesnt help me clear the partition map on these drives - ones that diskutility on leopard made for me - and drives which still cause kernel panics on the macpro if i put them in it..
here is what diskutil says on my g5:
/dev/disk0
#: type name size identifier
0: GUIDpartitionscheme *465.8 GB disk0
1: EFI 200.0 MB disk0s1
2: Apple_RAID 465.4 GB disk0s2
3: Apple_Boot 128.0 MB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk1
1: Applepartitionmap 31.5 KB disk1s1
2: Apple_HFS Macintosh HD 233.6 GB disk1s3
/dev/disk2
#: type name size identifier
0: *465.4 GB disk2
/dev/disk3
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk3
1: Applepartitionmap 31.5 KB disk3s1
2: Apple_HFS backup1T 931.4 GB disk3s3
/dev/disk4
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk4
1: Applepartitionmap 31.5 KB disk4s1
2: Apple_HFS tempi 931.4 GB disk4s3
disk0 is the one with the bad partition info.
it thinks it has a double raid as the console shows on startup:
(both store45 and cache it thinks are on this disk - cache was my old mirror of stripes set on other machine, store45 was new name for my mirror, so seems like it hadnt deleted the original raid partition info before making new info which now kernel panics)
Jul 18 18:48:05 localhost kernel[0]: AppleRAID::degradeSet - starting the set "STORE45" (B9C48619-6B2C-4547-A01E-4864754EA7E2).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::degradeSet - starting the set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "STORE45" (C0E139A4-2A6D-49C6-8F77-202AF7F9285D), member 50207BE5-E487-410E-8E8E-C4C4DCD2687B, set byte offset = 999527018496.
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B), member C0E139A4-2A6D-49C6-8F77-202AF7F9285D, set byte offset = 999527018496.
so currently i have 2 new 500gb disks which cant be partitioned back to anything at all on either machine. looks like i will have to buy a new pc to reformat them..
any suggestions of how to clear the partition map info and get them back to freespace ?? -
Help! G3 freaking out/kernel panic/memory problems
Hi All,
I put some pc 133 512 mb memory in my G3 [which is actually pc 100, but supposedly should work fine] and then it kernel paniced.
Now it mostly seems to recognize memory in the slot closest to the screen. But only 64 and 32 mb sticks.
Plus, it only boots to OS9 which is on a seperate partition to OSX which is where it is supposed to go, even after setting OSX as the startup.
It also always wants the time adjusted- perhaps the battery is flat- I put it all aside for a month after it happened.
Could the 512 MB pc 133 have fried something? It seems very fragile.
Safe start just keeps rebooting, and X on startup is ignored and os 9 starts.
HELP!!!
Any ideas gratefully received,
WumpsdadHey annexit,
Yes I get a lot of donated computers so I have probably 80 or so sticks of RAM around here mostly PC 100 and 133 out of both PCs and Macs. I'm constantly sorting through them and marking them: "Works w/ iMac G3, Kernal panic in iMac G4, Works in tower G4 Sawtooth, not recognized...etc."
..old G3 iMac 500 Mhz with one 128 and one 256 PC133 (probably scammed from a G4 tower when I upgraded that),
Was planning to replace the 128 with a 512 PC100 - I saw the post from spudnuty
If you look here:
http://eshop.macsales.com/shop/apple/memory/iMac/G3450MHz_500MHz_600MHz700MHz
OWC sells a mix of PC 100 and 133 for that machine. They are very good at taking it back if it doesn't work.
Is your G4 Tower still on your net?
running panther, safari crashing and I can't print to the attached printer from the intel laptops wirelessly..
Hmm that should work. I use a MDD G4 Tower as my workhorse and am able to print to it no problem. It's running Leopard now however but I don't remember a problem when it was running Tiger.
Running Panther could be your problem. I was lucky when I bought an iMac G4 for $50 (bad hard drive) in the bottom of the box was a complete set of Tiger CD installers (rare).
Richard
Message was edited by: spudnuty -
New iBook, kernel panics when awakened from sleep
I've been going nuts for several weeks now due to issues with my new iBook G4. When it is not plugged in, it may be fine when it wakes from sleep, or else it may wake to a black screen of death or else wake up and then freeze (requiring a restart) a few seconds after waking up.
I've reset the PMU several times, removed the third-party RAM (which I thought resolved the issue, until two crashes today when waking up unplugged), reset the PRAM, ran Disk Utility, did an archive and install of 10.4.2, etc. For a day, it would also go through infinite wake/sleep cycles when plugged in with the lid closed, but it resolved on its own within 24 hours. I was all set to send it in to Apple when the issue resolved itself on its own.
But I'm stumped as to the nature of the kernel panics/freezes, etc. They only happen when the iBook is unplugged from AC, USB, etc. and it is not 100% predictable. It may happen the second time I'm waking it up after not being connected to anything. Or it may be fine.
Here's the panic log from today, the details of which are identical to the panic that happened an hour earlier:
Mon Nov 7 16:53:11 2005
panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc = 000000000068E0B8, msr = 0000000000149030, dsisr = 42000000, dar = 00000000218B8000
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 00000000fff00000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x2CEEAA00)
PC=0x0068E0B8; MSR=0x00149030; DAR=0x218B8000; DSISR=0x42000000; LR=0x006B8C14; R1=0x0D113D70; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00033384 0x006B8C14 0x0003C744 0x000A9814
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(402.6)@0x675000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x5a3000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x458000
Exception state (sv=0x20EEFA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Suggestions? Is this really a hardware issue relating to the AirPort card, or is it something related to kernel extensions? It does not appear to be a user folder-related issue (I tested that as well). Thanks!I've been having similar problems with my iBook G4/1GHz computer. I haven't yet figured it out when or why it crashes after sleep, but this is sure: everytime there is USB mouse connected, it does that crashing. I bought mighty mouse to make sure, it wasn't the mouse which caused the problems. But no, it wasn't the mouse.
I've tried to google some solutions, but haven't found any. This is very annoying problem. Anyway I can get that crashlog after reboot?
Symptons:
When lid is opened, fan's are started, but no picture or network connection or anything is alive. Display is black. Requires reboot to get it up and running again.
I have run hardware tests on processor, usb, video ram and ram and all have passed. -
Help-think i have a kernel panic
I need help, every couple of months my computer goes nuts and crashes either when i start up or when using the internet or entourage mail. Usual starts with colored little dots on the screen and then the screen goes grey and the restart message shows, sometimes a red bar appears on the top of the screen. I think its a kernel panic?
Anyway, I have had it checked out, and the repair person swears my computer is fine, and must be a plug connected causing this issue. I have unplugged and plugged in many scenarios and seems to happen in all of them. I have even replaced my ethernet cord. Does not matter. I dont know if this a random fluke, but my computer keeps asking me to update airport for the past couple months and i dont have an airport-could be random. Can anyone help me??
here is my log:
Mac OS X Version 10.4.9 (Build 8P135)
2007-04-03 19:50:05 -0400
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
2007-04-03 19:50:09.842 SystemUIServer[105] lang is:en
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
2007-04-03 19:50:12.312 SyncServer[160] A Sync Server is already running on this computer, exiting process.
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Apr 3 19:50:23 ******-******-imac mDNSResponder: NAT Port Mapping (LLQ event port.): timeout
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717
Looking for devices matching vendor ID=1193 and product ID=8718
Looking for devices matching vendor ID=1193 and product ID=8717ok, read all of the above and followed all instructions-removing etc., but still crashing. maybe there is another issue? this is what my panic log says now:
panic.log:
Description: Panic (system crashes) log
Size: 104.87 KB
Last Modified: 4/13/07 8:57 PM
Location: /Library/Logs/panic.log
Recent Contents: ...
0x008236C4 0x0082282C 0x0081FDC0 0x0080E660 0x002E94C0 0x002EB38C
0x0008C06C 0x0002921C 0x000233F8 0x000ABCAC 0x017D2820
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x487000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Exception state (sv=0x2F0B9A00)
PC=0x9000B4C8; MSR=0x0200F030; DAR=0x0110E050; DSISR=0x0A000000; LR=0x9000B41C; R1=0xBFFFE300; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Dap
Thu Apr 12 21:11:16 2007
panic(cpu 0 caller 0x00821C9C): Apparent UniNorth Hang: AGP STATUS = 0x00000004
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x00821C9C 0x008221B0 0x0080C808 0x002EC0CC 0x0008C744
0x0002921C 0x000233F8 0x000ABCAC 0x2E647269
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x487000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x26070C80)
PC=0x9000B4C8; MSR=0x0000F030; DAR=0xBFFF59C0; DSISR=0x42000000; LR=0x9000B41C; R1=0xBFFF5950; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
Fri Apr 13 20:55:21 2007
panic(cpu 0 caller 0x00821C9C): Apparent UniNorth Hang: AGP STATUS = 0x00000004
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x00821C9C 0x008221B0 0x0080C808 0x002EC0CC 0x0008C744
0x0002921C 0x000233F8 0x000ABCAC 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x487000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x25DECC80)
PC=0x9000B4C8; MSR=0x0000D030; DAR=0xA0003A34; DSISR=0x40000000; LR=0x9000B41C; R1=0xBFFFD300; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
Fri Apr 13 20:57:59 2007
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002EFA334E PC=0x0000000000821E14
Latest crash info for cpu 0:
Exception state (sv=0x2EFF9A00)
PC=0x00821E14; MSR=0x00009030; DAR=0x2EFA334E; DSISR=0x40000000; LR=0x0082282C; R1=0x0CF1BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008236C4 0x0082282C 0x0081B07C 0x0080AC74 0x002E94C0 0x002EB38C
0x0008C06C 0x0002921C 0x000233F8 0x000ABCAC 0x2667743B
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x487000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Proceeding back via exception chain:
Exception state (sv=0x2EFF9A00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2F3AAA00)
PC=0x9000B4C8; MSR=0x0200F030; DAR=0x002C7004; DSISR=0x42000000; LR=0x9000B41C; R1=0xBFFFE900; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
Proceeding back via exception chain:
Exception state (sv=0x2EFF9A00)
PC=0x00821E14; MSR=0x00009030; DAR=0x2EFA334E; DSISR=0x40000000; LR=0x0082282C; R1=0x0CF1BAE0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008236C4 0x0082282C 0x0081B07C 0x0080AC74 0x002E94C0 0x002EB38C
0x0008C06C 0x0002921C 0x000233F8 0x000ABCAC 0x2667743B
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(4.1.8)@0x7ff000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x487000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.1)@0x5fc000
dependency: com.apple.iokit.IONDRVSupport(1.4.1)@0x620000
dependency: com.apple.NVDAResman(4.1.8)@0x636000
Exception state (sv=0x2F3AAA00)
PC=0x9000B4C8; MSR=0x0200F030; DAR=0x002C7004; DSISR=0x42000000; LR=0x9000B41C; R1=0xBFFFE900; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Dap -
SERIOUS Problem with mac pro and kernel panics
Hi guys, I have a mac pro with 6 gigabytes of RAM + a RAID 0+1 system with 4 750 gigabytes HD's. ( 2 drives work in stripped mode, and the other 2 drives mirror them )
I was experiencing some frecuent kernel panics when using final cut or trying to watch DVD's a few weeks ago. I saved some error logs then and uploaded them to my e-mail. The problem is that now the frequency of the panics is so high that the computer has turned unusable, it reaches the desktop without panics, but when I click finalcut and it starts opening , it panics all the time, if I start to open folders, it panics, anything I try = panic.
Weeks ago I made the Apple Hardware test, testing the memory a lot and the memory seemed to be fine,
Could you guys help me to identify the source of this?, I am desperate because the MacPro is my Working tool. Is there a way to check the hard drives also? ( remember I have raid 0+1 )
Here are the error logs that I managed to capture.
LOG 1
Sat May 31 22:47:56 2008
Machine-check capabilities (cpu 0) 0x0000000000000006:
6 error-reporting banks
Machine-check status 0x0000000000000004
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0x1400000000000000 invalid
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0xb22000cf0002010a valid
MCA error code : 0x010a
Model specific error code: 0x0002
Other information : 0x002000cf
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb20000300c000e0f valid
MCA error code : 0x0e0f
Model specific error code: 0x0c00
Other information : 0x00000030
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 0 caller 0x001A860C): Machine Check at 0x78478fb9, thread:0xc1374f0, trapno:0x12, err:0x0, registers:
CR0: 0x80010033, CR2: 0x7335b564, CR3: 0x00d50000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000050, ECX: 0x00000001, EDX: 0x09b858b0
ESP: 0x7f57bc40, EBP: 0x7f57bd38, ESI: 0x09b858b0, EDI: 0x00000001
EFL: 0x00010046, EIP: 0x78478fb9
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4e9e28 : 0x12b0e1 (0x457024 0x4e9e5c 0x13321a 0x0)
0x4e9e78 : 0x1a860c (0x460248 0x78478fb9 0xc1374f0 0x12)
0x4e9f58 : 0x19fbe3 (0x4e9f70 0x0 0x0 0x0)
0x7f57bd38 : 0x1a9b07 (0xffffffff 0x7fffffff 0x202 0x6)
0x7f57bd58 : 0x1a2a4e (0x0 0x538680 0xaad3193a 0x3f4)
0x7f57bd88 : 0x1357b3 (0x0 0xaad3193a 0x3f4 0x538568)
0x7f57bde8 : 0x135e53 (0x1 0xc1374f0 0x9a91c7c 0x1)
0x7f57be38 : 0x136941 (0xc13750c 0x30 0x7f57be98 0x13930a)
0x7f57be78 : 0x1369e5 (0x138fb3 0x0 0x0 0x1e)
0x7f57be98 : 0x13973a (0x138fb3 0x0 0x80 0x2)
0x7f57bf08 : 0x1398cd (0xa4d69cc 0x9a98058 0x0 0x37a6e7)
0x7f57bf38 : 0x37a7cd (0x4c03 0x4d03 0x37a6e7 0x37a813)
0x7f57bf78 : 0x3dbe77 (0xa077780 0xc13c740 0xc13c784 0x0)
0x7f57bfc8 : 0x19f084 (0xc0182e0 0x0 0x1a20b5 0xbbf02e8)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb04ebed8
BSD process name corresponding to current thread: Final Cut Pro
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)
LOG 2
Sun Jun 1 18:59:34 2008
Machine-check capabilities (cpu 0) 0x0000000000000006:
6 error-reporting banks
Machine-check status 0x0000000000000005
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0x1000000000000000 invalid
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0xb620000f0002010a valid
MCA error code : 0x010a
Model specific error code: 0x0002
Other information : 0x0020000f
Status bits:
Processor context corrupt
ADDR register valid
Error enabled
Uncorrected error
IA32MC3ADDR(0x40e): 0x00000000279ce9c0
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb200001806000e0f valid
MCA error code : 0x0e0f
Model specific error code: 0x0600
Other information : 0x00000018
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 0 caller 0x001A860C): Machine Check at 0x78478fb9, thread:0xa70ce40, trapno:0x12, err:0x0, registers:
CR0: 0x80010033, CR2: 0x73b17564, CR3: 0x00d50000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000050, ECX: 0x00000001, EDX: 0x09b858b0
ESP: 0x7f23f890, EBP: 0x7f23f988, ESI: 0x09b858b0, EDI: 0x00000001
EFL: 0x00000046, EIP: 0x78478fb9
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4e9e28 : 0x12b0e1 (0x457024 0x4e9e5c 0x13321a 0x0)
0x4e9e78 : 0x1a860c (0x460248 0x78478fb9 0xa70ce40 0x12)
0x4e9f58 : 0x19fbe3 (0x4e9f70 0x0 0x0 0x0)
0x7f23f988 : 0x1a9b07 (0xffffffff 0x7fffffff 0x202 0x6)
0x7f23f9a8 : 0x1a2a4e (0x0 0x538680 0xeec06eb 0x43f)
0x7f23f9d8 : 0x1357b3 (0x0 0xeec06eb 0x43f 0x538568)
0x7f23fa38 : 0x135e53 (0x1 0xa70ce40 0x9a91c7c 0x14025b)
0x7f23fa88 : 0x136941 (0xa70ce5c 0x8c98967c 0x0 0x0)
0x7f23fac8 : 0x1369e5 (0x0 0x0 0x0 0x0)
0x7f23fae8 : 0x8c961a05 (0x0 0x0 0x64 0x3e8)
0x7f23fb48 : 0x8c9508aa (0xbc23600 0x7b01c 0x7f23fb68 0x698fc000)
0x7f23fb78 : 0x8c950978 (0x69732000 0x7b01c 0x1 0x1)
0x7f23fb98 : 0x8c91fe8f (0x69732000 0x7b01c 0x40000 0x15)
0x7f23fc88 : 0x4375c0 (0x698c7000 0x1 0x7f23fcdc 0x7f23fcd8)
0x7f23fcf8 : 0x43be19 (0x698c7000 0x1 0xa63b6b8 0x1)
0x7f23fd28 : 0x43bf30 (0x698c7000 0x1 0xa63b6b8 0x7f23fd58)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.2.4)@0x8c903000->0x8c989fff
dependency: com.apple.NVDAResman(5.2.4)@0x8c500000
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x7f61a000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x781f0000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.1)@0x7f871000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)What you mention is really interesting , maybe I could try to benchmark the card very hard to see if I get the panics there. I will try that for sure, because my RAID wasn't actually a 0+1. It's what they call a RAID 10 , ( two groups of mirrored drives, + striped )
It's like this post in macosrumors, but instead of two groups of striped disks, the big group is striped, and I got two smaller mirrored groups.
http://forums.macrumors.com/showthread.php?t=445731
And I think that sould be working just fine without the RAID PCI-X card right ? ( maybe I'm wrong here , that's why I need your input guys . ) -
Mac won't start (Kernel Panics)
Hello,
My mac won't start up. It turns on, gets as far as the spinning circle and apple logo then a dark screen comes down with a Kernel Panic message. This occurred roughly three months ago and I ended up taking the mac into the regent street store where it was fixed under apple care warranty. My care has now run out, and the 90 day repair warranty has expired but the problem is back so obviously hasn't been fixed properly. Is there anything that can be done about this?
Every time I boot up the computer the message appears, I have tried rebooting with the safe option as well as re installing OSX from the original disks. The install completes successfully but upon restart it pops up with the original kernel panic message.
Luckily I have everything backed up so am prepared to try anything to get it running.
Thanks.Let us know, but since you obviously have another machine, have you tried Target Disk Mode and then Disk Utility?
use TDM to access Disk Utility.
1. Click the First Aid tab.
2. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
3. Select your Mac OS X volume.
4. Click Repair. Disk Utility checks and repairs the disk.
Please post back, -
Please help with a new dual purpose PC build
Hi everybody in AdobeLand!
I've been reading various boards and hardware sites and have started piecing together a dual purpose computer system. It will be used for both video editing (of pre-shot hacked, high bitrate I-Frame Panasonic GH2 DSLR and camcorder footage using the AVCHD codec @ 1080p 24 and 30 fps) and webcasting/streaming purposes. I would build two computers for each task, but it's just not in the budget right now. I'm already stretching things as is.
I'm still not sure if I will be using Adobe Premiere or Sony Vegas Pro 12 yet, though it seems like they organize their folders and file structures about the same. Adobe's cloud service has me a bit scared off right now. This new scheme feels like they have their hand purpetually in your wallet, which does not sit well with me. I may still go with Vegas 12 just to avoid that hassle right now. Help guide me here, experts! Telestream's Wirecast is being used for multi-cam switching and graphics for live and pre-recorded material being compressed and streamed.
Back on topic:
Here's the build as of right now...
OS: Windows 7 64-Bit Professional (Windows 8 absolutely sucks!)
CPU: Intel i7-4930k 6-Core Ivy Bridge (own)
Motherboard: Asus P9X79 Pro (own)
Memory: Crucial Ballistix 1.35v Sport DDR3L @ 32 GB (own)
GPU: EVGA GTX 770 FTW w/ 4 GB (will buy another HD monitor at a later date, hence the 4GB memory)
Case: Fractal Design XL R2 Full Tower
CPU Cooling: Noctua NH-D14 w/ SE2011 Bracket
PSU: Corsair RM1000 Quiet Series / 80 Plus Gold / 1000 Watts
Monitor: Dell U2412M Ultrasharp 24 inch / 1920x1200
Optical Drive: LG Blu-ray Writer
Keyboard: Microsoft 4000 Ergonomic
HDMI capture cards: Blackmagic Designs Decklink Mini (x2)
Storage:
I bought two Samsung 840 Pro SSD drives: one 128 GB and one 256 GB
Thinking about possibly 2 (maybe 3-4 if I really stretch) Seagate ST3000DM001 3TB HDD's.
I could sure use your help with any advise on arranging the storage to get the best bang vs. buck in speed and storage utilization (Wirecast can be setup to record live webcast sessions at 720p or 1080p in compressed files... probably no more than 120 minute webcasts... so that comes into play as well). Just don't have the funds for an uber-expensive RAID controller card right now.
Any opinions overall on the parts for the current build? I still have time to send back and exchange anything already purchased.
Thank you for your time and consideration.What do you not understand from:
With all the reading and writing going on, on the boot disk, it is understandable you need a (number of) dedicated disk(s) for video editing, especially with the bandwidths required when the clip duration is short and the number of tracks exceeds one and uses a codec more complex than DV. The kind of files used during editing are, in order of their need for speed:
Media cache & Media cache database files, created on importing media into a project. They contain indexed, conformed audio and peak files for waveform display.
Typically small files, but lots of them, so in the end they still occupy lots of disk space.
Preview (rendered) files, created when the time-line is rendered for preview purposes, the red bar turned to green. Read all the time when previewing the time-line.
Project files, including project auto-save files, that are constantly being read and saved as auto-save files and written when saving your edits.
Media files, the original video material ingested from tape or card based cameras. Typically long files, only used for reading, since PR is a non-destructive editor.
Export files, created when the time-line is exported to its final delivery format. These files are typically only written once and often vary in size from several hundred KB to tens of GB.
When you are doubting which category of files to put on which kind of disk, especially when using both SSD's and HDD's, keep in mind that the speed advantage of SSD's over HDD's is most noteworthy with the Media cache & Media cache database. These files are frequently accessed, are small and there are many, so reducing latency and seek times and increasing transfer rates pays off by putting these on a SSD, rather than on a HDD, even if it is a raid0. Export files can go to the slowest volume on your system, since you only export once. To help you decide, I have added priority rank-numbers for speed, with 1 for the fastest volume and 5 for the least speed-demanding category.
and
Well, in the benchmark tests we have not seen any noticeable difference between SSD and HDD in terms of performance, but logic dictates that there should be a small difference in performance when the volume used for media cache is a SSD, because of the much faster access time and lower latency compared to a conventional disk. If it is noticeable, it is specifically on this volume with the media cache and media cache database, due to the large amount of small files that need to be accessed and written. This argument does not apply to the media volume with a limited number of files, that are very big in size. -
I need help with my new LG G2. I dial *611 but it will not recognize my phone number
I am having trouble setting up my new LG G2. When I dial *611, it will not recognize my number, and the 800 number refers me back to the *611 number. There is no live chat available on the website, so I am lost. Is this any way to run customer support?
It seems I am about the only G2 customer support you'll fund unfortunately. Chat is available on the support site after logging in to My Verizon on the web, but you have to click on Contact Us at the top right of the page then choose Live Chat and then Help with My device and then look to the right and wait for the red dot to turn green. *611 will take you to a screen where you can launch My Verizon or Click to Call which dials the customer support number. Unfortunately chat is about as useless as waiting for a rep to respond in the forums. Calling is the only way to get started and work your way up the chain. Going to a store is a hassle. What exactly is the problem you're having? You can't activate the phone or set up your Google accounts or what?
-
Please help me! I have kernel panic on boot
Greetings.
I have to be honest with you and tell you that I have a problem with my iMac computer. I'm a big fan of Apple products, especially Mac computers. I live in Bosnia and Herzegovina, where there is no Apple store, and that's why I bought my iMac computer in Croatia that was used that had a "kernel panic" error. After several failed attempts I managed to install "hazard OSX Snow Leopard" and the computer boots up normally but when it goes to shutdown freezes and shows "kernel panic" and says "you need to restart your computer." When I installed OSX everything is working normally, but I have no sound, the computer continues to shutdown shows "kernel panic" or "system uptime in nanoseconds ..." freeze. I bought the original OSX Snow Leopard DVD because I want to have a legal iMac computer and legal software on it. When i try to boot from original "OSX Snow Leopard" i get "kernel panic" fast after Apple logo appears. I try other discs but i get same problem. I try reset pram, nvram, SMC, i try another HDD and no help. I bought 2 original memory sticks 2x2Gb in Germany and when i put one or both , turn on Imac but no startup chime and no picture.
Please help me solve this problem. thanks
My iMac computer configuration is:
6.1 iMac 2.33 GHz Intel Core Duo 24 "White
S.N. W8******VGP
Memory: 3GB, 667 MHz DDR2 SDRAM
OSX Snow Leopard 10.6.2
<Edited by Host>I did all the tests with the program Tech Tool Pro and post pictures to see if everything is fine with my iMac computer. If there is still any advice please help me. I installed Snow Leopard Biohazard and boots properly except when off or reboot blue screen freeze up and only one point where the mouse is.
-
Help with Footers (New Update Glitch)
Hi there,
I'm in need of some urgent help with my website as upon publishing with the new update installed all my footers have changed.
I now have massive gaps between where my content ends and the footer begins on almost every page. Example.
Pages which are attached to the Master pages are not reading the same footer positions now. For example, my home page footer begins at nearly 1300 but the master it's attached to it should be closer to 950..... Everything was fine until the update today.
Any help would be appreciated. Thanks!Maybe I can explain this a little better, issue is still going on, spoke with an Adobe representative but didn't get any helpful advice, actually got no advice other than to send the file in.
So here's my home page: you can see the gap between the content and the footer (with the footer starting at around 1300.
But then here's the Master page it's attached to, the footer is set to start way higher, this is happening on every one of my pages.
Maybe you are looking for
-
Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"? Thanks! -Adrian
-
How do I change my default email to something other than Mail?
Whenever I try to use the "contact us" button on websites, Mail pops up but I want to use another email provider. Anyone know how to set my other emails as the default?
-
Safari 3.0.4 stalls when opening an address (URL)
I installed the upgrade from 10.4.10 to 10.4.11 which includes Safari 3.0.4. I typed in an address (URL) to be opened. Safari 3.0.4 began the connection but then stalled part way through. I tried a couple of other addresses with the same result. Fire
-
Hi Friends, I want to add new fields in KEU1 for sender as internal order(Create Actual Assessment Cycle). How I can modify the fields in keu1. Can anybody please tell me how could I do it. Thanks & Regards. Edited by: NITIN on Apr 21, 2010 9:4
-
Wrong status for PO in SRM Portal
Expert's, I'm trying to update a status in SRM 5 portal for a purchase order. The main problem was that the status was " error in process" because the PO was not tranfered to the backend system. Manually, using BBP_PD_PO_TRANSFER_EXEC the PO was tra