Help with form sending the data to email

I have looked all over the Internet for help with this. I have tried numerous video tutorials and for some reason I can't get it to work. I have created a form in flash cs4 AS2. It is a contact information form where the user fills out their information and sends it. I have created a the form in a movie clip (I have also tried it not in a movie clip) with the form components inside that movie clip. I have given each component on the form an instance name.
The form has:
Full name (with instance name=name)
Company (with IN =company)
Title (with IN = title)
Phone (with IN = phone)
Email (with IN = email)
Topic combobox (with IN=topic)
Message box (with IN=msg)
Submit button (with IN=submit)
I need help with the actionscript writing. I am VERY new to flash and have never done any scripting really. Does anyone have a sample file I can look at to see how it works or can someone IM me and I can send my file for them to help me?
My IM is logan3975
Any help is greatly appreciated. I consider myself a pretty technical person so I do learn quick...I just need some guidance until I wrap my head around how this all works. Thanks.

Here's a link to a posting elsewhere some had had that may provide some useful info (?)
http://board.flashkit.com/board/showthread.php?t=684031

Similar Messages

HT5312 I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

I forget answer to my qustion with rescue email adrees please help me and send the answer to my main mail. Thank you very much

We are fellow users here on these forums, you're not talking to iTunes Support.
If you don't have access to your rescue email account, or you don't have one on your iTunes account, then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add/change a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Data from check boxes fails to be collected, when sending the PDF as email

Hi
I am working on an interactive PDF that should act as an ordersheet for clients to fill out. I am using Acrobat Pro 9, and everything works as intended, but when the client tries to send the order by email (By pressing a button that uses "submit a form" as actio, where it sends the whole PDF to a single email), the pdf pops up in the email client, and everything looks fine, except all of the checkboxes. None of them have been checked, even though the client have done so. I have searched the forums without luck, so now i am trying in here.
I have made sure that the client is using the version, that has the extended reader rights.
If you feel need additional information regarding the PDF, just ask.
Thank you very much for your time.

Edit>Preferences>Email accounts>List of email accounts. Click the drop-down that says "add account" and select Gmail. After adding it, you can go to the account area and change it to default.

Problem with interface - when send the data for PA0002

Hi Gurus,
I am interfacing employees data from one system to another system with all the PA infotypes.
we are using the fuction module " HR_MAINTAIN_MASTERDATA " to upload the master data. Here the problem is, when we send the data - in destination system all the segments have the data correctly . But middle name is not loaded in to the system. Problem with only middle name.
But, here strange thing is, when i resend the idocs it is laoded correctly all the fields with middle name also.
I am unable to figure out the problem .. Please let me know if you have any advise on this ..
Thanking you.
Regards,
Giridhar Pujari

Hi Sikindar,
Technical name is corrent .. and once you resend the idoc, you can't see the problem again.
Regards,
Giridhar Pujari.

ı wanna delete my purcahe but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

ı wanna delete my purchase but it did hide and where is the hidding ı wanna delete my purchase please because I am not looking a few purchase (dowloaded at the apple store) help me and send message to my email thank you have good work.

what?

My PC Harddrive died along with all the CD's that I have saved to the Itunes library. My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library. Is this possible?

My PC Harddrive died along with all the CD's that I have saved to the Itunes library. My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library. Is this possible?

Yes, by using a third-party utility such as Phone to PC or Phone to Mac.
Also see How to dowload purchased music and Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to genetare reports(ssrs) with form library's data in sharepoint 2010

Hi,
How to genetare reports (ssrs) with form library's data in sharepoint 2010.I am saving infopath(2010) xml form data in form library.I have 500 and more forms in the form library( more forms can come in future).How to generate reports from this xml data (i
want to make it automate)? Reports should get updated automatically when any changes made to data and if new form entered in the library.
Please suggest possible solutions.I can not go for code base solution.( somthing SSIS, BCS or web service ....etc or anything else will be fine)
Thanks in advance.

Hi,
According to your post, my understanding is that you wanted to generate SSRS report with form library in SharePoint 2010.
In order to use the data stored on the InfoPath form, you need to add the controls on the form to be columns in SharePoint(This is the OOTB way without code).
You can add the control during the publish process:
Then when you create the SSRS report using the form library as the data source, you can use the fields just as the fields created in SharePoint.
There is a tool called InfoPath DB in codeplex, you can have a look at it.
http://infopathdb.codeplex.com/
More reference:
http://sharepoint.stackexchange.com/questions/28825/how-to-query-a-form-library-in-sharepoint-2010
http://sharepoint.stackexchange.com/questions/38492/reporting-against-a-form-library
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

ABAP Proxies to send the data to PI

I have a scenario to send some data from ECC to Legacy system in flatfile format. I would like to use ABAP client proxies on the ECC side and File receiver adapter to tranmit the data to Legacy system.
I tried various sample scenarios and know how to send simple data using ABAP report program(which triggers the client proxy from ECC).
But the question is if I have to read SAP data files and send the data conditionally based on certain criteria to the other Legacy system. How do we write the ABAP code with in the ABAP Proxie program? Can any body share the real time coding procedure to achieve this. I am not good at ABAP.
I absolutely have good idea how we can configure on the receiver side.
Thanks in advance.

Hi
If I want to transfer only specific data from various SAP database files from ECC and then triggering the ABAP client proxy in the ABAP report program
There are various ways to do this. Create a class that can call reports(forms) for various legacy system say L1, L2 and L3. now create 3 reports each for the systems .
In XI create a generic structure which can satisfy L1, L2 & L3 and generate the proxy for this structure.
now in reports for L1 pass the data from ERP tables specific to L1 and use the client proxy report to pass the data to XI and deliver the flat file. Similarly for others you can do
now at XI you do conditional receiver determination. Identify the condition from the payload that can distinguish L1, L2 & L3. based on this you can pass the data to defined receiver.
Hope this helps.
Thanks
Gaurav

How can i send the data from WD to SMARTFROMS to fill it?

Hi All,
how can i send the data from WD to SMARTFROMS to fill it?
Best Regards

Hello
After conferring with a colleague, the following response may help:
The Smart Form doesn't have any special integration in WebDynpro.
Therefore the application should implement it especially.
Steps:
1) Call of Smart Forms in mode GET_OTF
2) Convert OTF to PDF
3) Show the PDF in WD Context Node
Similar topic was discussed here:
Re: Displaying Smartforms in Webdynpro ABAP
Thanks
Kind Regards
Toros Aledjian
Edited by: Toros Aledjian on Nov 29, 2010 8:43 AM

Can I just send the data to NIC's buffer in LV? (how to access data link layer?)

Now, I need to send something over network, yet those are not packed in TCP/IP or IPX packet, them are just some data a device can understand.
So the problem I met is seems I cann't send the data into NIC's buffer(I can do that in C, yet I want to use LabVIEW to do that)
And I don't want to do that by using a CIN, every time the program call or exit the CIN,there will be a delay, it's would bring me a bad impace to my application.
So is there anyone can help me with that? I really need some master can give me a comfirm!

I'm not an expert on network communication, so maybe you can explain how data can travel on an IP based network without being wrapped in some packets from a protocol like TCP or UDP? Maybe it's possible for LabVIEW to do what you want, or maybe compiling your C code into a DLL (no need for a CIN) and calling that will be fast enough for what you want.
In any case, I think I can answer one question:
So, how long would we have to expect LV add/improve these functions? Could it be in next minor update?
Not likely, nor is it likely to be in any other version soon. LabVIEW is not built to handle this sort of thing any more than PHP or perl are and I don't think NI will change it to be able to do so. For that you have C, which you can call through a DLL. Some DLLs are supported on RT targets as well, but I'm not sure what the criteria are. They are probably listed somewhere on this site.
I assume that calling a DLL in an RT target will hurt your determinism, but communication code should not be time-critical code, unless your application is an application which requires high speed data transfers and synchronization between different nodes.
Try to take over the world!

How to execute the data in the form when the data is already avaliable

Hi,
I am working with forms 6i. I have a problem while executing the data in the form
Actually, the data is already present in the form. But when i run the form, the data is not displayed.
can anyone please help me how to execute the data. below is the code
Set_Alert_Property(alert_id,ALERT_MESSAGE_TEXT,'Do you want to refresh new Data for that Year and Field ? (it will take a time).') ;
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON1, LABEL, 'Yes');
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON2, LABEL, 'No');
               SET_ALERT_BUTTON_PROPERTY(alert_id, ALERT_BUTTON3, LABEL, 'Cancel');
               button_number :=Show_Alert(alert_id) ;
               synchronize;
               if button_number != ALERT_BUTTON3 then
                    if button_number = ALERT_BUTTON1 then
                         :param.field := :control.f_cd;
                         :param.year := :control.year;
                         build_tables;
                         fields;
-- areas(:param.field);
                         PUT_PARAM;
                         COMMIT_FORM;
                    go_block('wet_criterias');
                    end if;
                    if button_number = ALERT_BUTTON2 then
                         :exhibits.field_display := :control.f_name || ' - Exhibits';
                         go_block('RESERVOIR');
                         execute_query;
                    end if;
               end if;
          end if;
else
     message('Fields must be entered...');
end if;
else
message('Fields must be entered...');
end if;

It's hard to know what logic you are trying to implement.
However, by looking at your code, it seems that if the user select 'Yes' to the question "Do you want to refresh", nothing is done except the go_block('wet_criterias'). Should there be an 'Execute_Query' ?
No idea...

Don't send the data to nikeplus

I still use my iPod nano 4th generation... But don't send the data of the podometer to Nike plus, so i have to buy the chip, or buy a new iPod?
All this after some updates....
Thanks!

Hi,
In SOAP communciation channel, you have the parameter as Target URL, just below that you will fine some checkbox as Configure Proxy.
Select this option and it will ask for HOST and PORT, these details will be available with the contact person of receiver Web Application, just fill up and this is HTTPS so may required related User ID and Password also to be specify. for this select the chek box Configure Proxy User Authetication.
Hope this will help.
thanks
Swarup

How to send the data from jsp page to excel ???

hi all,
i want to send the data from my jsp form to excel sheet. any one can help me ??

Hope this sample code might help :
StringBuffer data = new StringBuffer();
OutputStream ostream = response.getOutputStream();
response.setContentType("application/vnd.ms-excel");
response.setHeader( "Content-Disposition",
"attachment; filename=sample.xls" );
ostream.write(data.toString().getBytes());
ostream.flush();
Try it out.
Swathi

Can we send the data into different data target from single datasource how

Hai
can we send the data into different data target from single datasource how ?

Hi,
Create the transformation for each target and connect through DTP if you are in BI 7.0
If it is BW 3.5 create transfer rules and load it Info source and then different update rules for different targets then load it using IP.
If you are speaking about loading data from R3 data source to multiple data sources in BI
Then follow the below step.
1)create init IP's and run the IP's with different selection to different DSO(With same selection it is not possible).
2)Then you will have different delta queues for the same data source in RSA7
3)Your delta loads will run fine to different data sources from same DS in R3.
Hope this helps
Regards,
Venkatesh

Not able to see the output in sost when sending the image in email body

I am sending the image in email body and when m trying to see the output in SOST then it showing a page 'you are not connected to the internet'
I am able to see the output when m saving local objects but when m saving it in some package its showing me this page
Kindly help it
Regards
Pratham Kapoor

Hello Prakash,
Thanks for the reply
I am able to see the mail in SOST but when I click on the Display Document to see the content of the mail then I am getting this error of 'you are not connected to the internet'
My Program is to put the logo in my email body
I am sending you the attached image

Help with form sending the data to email

Similar Messages

Maybe you are looking for