Help with idoc selection

Hi
i want to read all the idocs created based on the date and user name.
select  uname credat cretim docnum into  table
itab from edids
               where credat in s_rsdat and
                      uname in s_user and
                      countr = ' '.
In edids table for different countr field the user name differs for same idoc number what does that mean
thanks

hi
atleast the countr 0 indicates the date on which it is created for countr 1 the date may be different.
iam guessing that that the countr would be created when the idoc is created right.
thats the reason i am using it in my selection criteria.
i can read from edid4 table but again there is no user name field.
pls let me know.
if iam wrong pls let me how to read the idoc created based on date and and person responsible for creation
do you have any idea about the second question.
i.e for different counters the user name differs
thanks

Similar Messages

  • I need help with a SELECT query - help!

    Hello, I need help with a select statement.
    I have a table with 2 fields as shown below
    Name | Type
    John | 1
    John | 2
    John | 3
    Paul | 1
    Paul | 2
    Paul | 3
    Mark | 1
    Mark | 2
    I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
    Thanks,
    Ian

    Or, if the types are sequential from 1 upwards you could simply do:-
    SQL> create table t as
      2  select 'John' as name, 1 as type from dual union
      3  select 'John',2 from dual union
      4  select 'John',3 from dual union
      5  select 'Paul',1 from dual union
      6  select 'Paul',2 from dual union
      7  select 'Paul',3 from dual union
      8  select 'Paul',4 from dual union
      9  select 'Mark',1 from dual union
    10  select 'Mark',2 from dual;
    Table created.
    SQL> select name
      2  from t
      3  group by name
      4  having count(*) <= 2;
    NAME
    Mark
    SQL>Or another alternative if they aren't sequential:
    SQL> ed
    Wrote file afiedt.buf
      1  select name from (
      2    select name, max(type) t
      3    from t
      4    group by name
      5    )
      6* where t < 3
    SQL> /
    NAME
    Mark
    SQL>Message was edited by:
    blushadow

  • Need some help with the Select query.

    Need some help with the Select query.
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    select single vkorg abgru from ZADS into it_rej.
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
            VKORG TYPE VBAK-VKORG,
            ABGRU TYPE VBAP-ABGRU,
           END OF IT_REJ.
    This is causing performance issue. They are asking me to include the where condition for this select query.
    What should be my select query here?
    Please suggest....
    Any suggestion will be apprecaiated!
    Regards,
    Developer

    Hello Everybody!
    Thank you for all your response!
    I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table 
    select vkorg abgru from ZADS into it_rej.
    Earlier :
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    Now :
    DATA : BEGIN OF IT_REJ occurs 0,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    I guess this will fix the issue correct?
    PLease suggest!
    Regards,
    Developer.

  • Is it possible to make a search help with dynamic  selection table?

    Hi Experts,
    Is it possible to create search helps with dynamic seletion tables means
    i dont know the selection table names at the time of creation of search help.
    These tables will be determined at runtime.
    if yes, Please give an idea how to create and pass the table names at runtime.
    Thanks
    Yogesh Gupta

    Hi Yogesh,
    Create and fill your itab and show it with FM F4IF_INT_TABLE_VALUE_REQUEST
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'field to return from itab'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          dynprofield     = 'field on your screen to be filled'
          stepl           = sy-stepl
          window_title    = 'some text'
          value_org       = 'S'
        TABLES
          value_tab       = itab
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
    Darley

  • Search help with new selection within if more than 500 entries

    Dear all,
    I created a new search help and this works fine ... If I compare my search help with a default search help from SAP,  I have 1 small feature that not seems to work ... With the default one, it is possible to make a new selection within the search help by clicking on the arrow down :
    If I look at my search help, I don't have the possibility to make a new selection :
    Does anyone how this can be done ?
    Thanks in advance !
    Greetz,
    Kurt.

    HI,
    Here are the general steps to get you started.
    1. Identify the search help being used (on the ship-to-party field, F1 then Tech Info). I believe you want the collective search help SD_DEBI.
    2. Create your own search help with the fields you want to use with SE11, like 'ZDEBI' as an example.
    3. Append 'ZDEBI' to SD_DEBI. (Goto->Append Search Help).
    4. Clean things up by "Hiding" the old search help. In the 'Included Search Help' tab of the collective search help SD_DEBI, there is a check box that you can tick to hide included search helps.

  • Help with a select statement from a SQL Server within a DTS !!

    Hello Gurus!
    I help with the script bellow, when I run it within DTS (in SQL Sever 2000), I got the error Invalid number/or not a valid month.
    Please bellow with the WHERE CLASUE '08/01/2001' AND '03/09/2002'
    And in the other hand I change this forma to '01-AUG-01' AND
    '03-MAR-2002', the DTS start and run witha successful messages, but it does not returns row, which is wrong.
    Somebady please help!
    Thanks Gurus!
    GET Total ANIs with Trafic By Area Code
    select
         substr(b.ct_num, 0,3) as Area_Codes,
         COUNT(DISTINCT B.CT_NUM) AS ANIS
    from
         wasabi.v_trans A,
         wasabi.V_Sur_Universal B,
         wasabi.V_Sub C,
         wasabi.V_Trans_Typ D
    where
         D.Trans_typ = A.Trans_Typ AND
         A.Sur_ID = B.Sur_ID AND
         C.Sub_ID = A.Sub_ID AND
         a.trans_stat != 'X' AND     
         a.Trans_DTTM >= '08/01/2001'AND
         a.Trans_DTTM < '03/09/2002 AND
         B.AMA3 = 'PHONE1'
         AND C.SUB_ID not in (100117)
    GROUP BY
         substr(b.ct_num, 0,3)
    ORDER BY
         Area_Codes

    I think that you need a "to_date" function eg
    change '08/01/2001' to to_date('08/01/2001','dd/mm/yyyy')

  • Help with GBIC selection LH vs ZX

    Dear Support,
    I now have the estimated Attenuation values from our fibre provider, and wondering if anyone could help with determining if I can utilise the cheaper (LH modules) across the 20 & 15 KM streches.
    Thanks in advance (many thanks to Josh for helping out with my previous post - below)
    HQ to DC1 = 1310nm: 2.5dB, 1550nm: 2.2dB.
    DC1 to DC2 = 1310nm: 14.5dB , 1550nm: 13.1dB
    DC2 to HQ = 1310nm: 10.1dB, 1550nm: 9dB
    =========================================
    Dear Support,
    Sorry but new to optical networking, but need some assistance on an upgrade that we are performing.
    We currently have two data centres that hold our servers and are planning to upgrade from LES circuits to Gigabit links, and triangulate our topology. (effectively a ring topology)
    I have already spoken to our proposed fibre provider and they have provide me with rough distances, but due to one of the data centres being more than 10 km away we need to use ZX based GBICs. Summary of distances below;
    HQ -> dc1 (1 – 2 km)
    HQ -> dc2 (15 km)
    Dc1 -> dc2 (20 km)
    From our HQ to dc1 we will use LH (via a GLC-LH-SM= in a 2970G) and a to dc2 we will use ZX (via a GLC-ZX-SM= in another 2970G)
    From DC1 to HQ we will use LH (via a WS-G5486 in a 7204VXR) and a to dc2 we will use ZX (via a WS-G5487 in another 7204VXR)
    From DC2 to HQ we will use ZX (via a WS-G5487 in a 7204VXR) and a to dc1 we will use ZX (via a WS-G5487 in another 7204VXR)
    Hope this doesn’t confuse things more.
    Now to the question.
    From the Cisco web site it mentions the following;
    When shorter distances of single-mode fiber are used, it might be necessary to insert an in-line optical attenuator in the link to avoid overloading the receiver:
    • A 5-dB or 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the Cisco 1000BASE-ZX GBIC at each end of the link whenever the fiber-optic cable span is less than 15.5 miles (25 km).
    We haven’t yet had the fibre survey performed, but once they have advised me of the attenuation on the link, how should I calculate what level of “in-line optical attenuator” I should need or should all reputable fibre providers advise me of this detail.
    Thanks in advance.
    Regards, Adrian

    Summary of Optical Levels:
    GLC-ZX-SM:
    Transmit: 0 to +5
    Receive: -23 to 0
    GLC-LH-SM:
    Transmit: -9.5 to -3
    Receive: -20 to -3
    G5486:
    Transmit: -9.5 to -3
    Receive: -20 to -3
    G5487:
    Transmit: 0 to 5.2
    Receive: -24 to -3
    Given the above:
    HQ -> DC2: maximum receive level will be 5-10.1 = -5.1 dB, which is OK for the G5487
    HQ <- DC2: maximum receive level will be 5.2-10.1 = -4.9 dB, which is OK for the GLC-ZX-SM
    HQ -> DC1: maximum receive level will be -3-2.5 = -5.5 dB, which is OK for the G5486
    HQ <- DC1: maximum receive level will be -3-2.5 = -5.5 dB, which is OK for the GLC-LH-SM
    DC1 -> DC2:maximum receive level will be 5.2-14.5 = -9.3 dB, which is OK for the G5487
    DC1 <- DC2:maximum receive level will be 5.2-14.5 = -9.3 dB, which is OK for the G5487
    Therefore, you do not need attenuators anywhere.
    Now, to your next queston. If you used the LH modules, you the minimum possible receive levels now become:
    HQ -> DC2: minimum possible receive level will be -9.5-10.1 = -19.6 dB, which is only just OK for the G5486
    HQ <- DC2: minimum possible receive level will be -9.5-10.1 = -19.6 dB, which is only just OK for the G5486
    DC1 -> DC2: minimum possible receive level will be -9.5-14.2 = -24 dB, which is too low for the G5486
    DC1 <- DC2: minimum possible receive level will be -9.5-14.2 = -24 dB, which is too low for the G5486
    Therefore, my recommendation is to stick with the ZX modules for these links.
    Hope that helps - pls rate the post if it does.
    Paresh

  • Help with record selection/grouping

    I am trying to create a report as follows, but am running into some problems with my selection/grouping:
    Data Structure (each line is a separate record; each employee has 2 records)
    Employee             TaskID      TaskStatus           Marker         Date Modified
    1                               A                CLOSED             x
    1                               B                OPEN                  N/A
    2                               A                CLOSED              y
    2                               B                OPEN                 N/A
    3                               A                CLOSED             x
    3                               B                CLOSED            N/A
    4                               A                CLOSED             y
    4                               B                CLOSED           N/A
    Report Requirements
    I want a report that displays only employee number and the date that Task B was completed for all employees, and I want these records grouped based on Task B's Task Status (no problem.  I did this).
    However, I want to sub-group these Task B records (within Task Status) by the Marker field for Task A records!  (I can't figure this out?  If I only pull in Task B records, how can I compare what the associated employee has as a marker for their Task A record?)
    Again, I only want to display data from the employee's Task B record, while subgrouping on a field value from the empoyee's Task A record.  The report would be structured as follows:
    Task B (OPEN), with Task A - Marker (x)
                     {Date Modified}
    Task B (OPEN), with Task A - Marker (y)
                     {Date Modified}
    Task B (CLOSED), with Task A - Marker (x)
                    {Date Modified}
    Task B (CLOSED), with Task A - Marker (y)
                      {Date Modified}
    Thanks.
    Gary

    The easiest way would be to use an SQL Command that returns both the Task A and Task B data on one record.  Something like (MS SQL):
    select b.employee, b.taskid as task_b, b.task_status_b, b.marker as marker_b, b.date_modified as date_modified_b,
        a.taskid as task_a, a.task_status_a, a.marker as marker_a, a.date_modified as date_modified_a
    from table a, table b
    where a.employee = b.employee
    and a.taskid = 'A'
    and b.taskid = 'B'
    HTH,
    Carl

  • Need Help With A Select Staement

    This is my data set.
    OPEN_DATE CLOSE_DATE
    02-JAN-08 02-JAN-08
    02-JAN-08 02-JAN-08
    02-JAN-08 02-JAN-08
    02-JAN-08 03-JAN-08
    04-JAN-08 04-JAN-08
    05-JAN-08
    07-JAN-08
    07-JAN-08 07-JAN-08
    07-JAN-08 07-JAN-08
    08-JAN-08 08-JAN-08
    08-JAN-08
    02-JAN-08
    02-JAN-08
    08-JAN-08
    09-JAN-08
    I'm need totals for those that are opened and closed per day. Here is what I'm trying to achieve...
    Status Value DATE
    Open 6 02-JAN-08
    Closed 3 02-JAN-08
    Open 0 03-JAN-08
    Closed 1 03-JAN-08
    Open 1 04-JAN-08
    Closed 1 04-JAN-08
    Open 0 05-JAN-08
    Closed 1 05-JAN-08
    Open 3 07-JAN-08
    Closed 2 07-JAN-08
    Open 3 08-JAN-08
    Closed 1 08-JAN-08
    Open 1 09-JAN-08
    Close 0 09-JAN-08
    This select statement gets me close but the problem is how to get the ones that should have a Value of 0
    select 'Open' "Status", count(*) "Value", to_char(open_date, 'DD-MON-YY') "DATE"
    from usar_log2
    where open_date IS NOT NULL and
    to_char(open_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
    and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
    group by to_char(open_date, 'DD-MON-YY')
    UNION
    select 'Closed' "status", count(*) "Close", to_char(close_date, 'DD-MON-YY')
    from usar_log2
    where close_date is not null and
    to_char(close_date, 'MON-YY') = to_char(sysdate, 'MON-YY')
    and (USAR_status like 'CLOSED' or usar_status like 'OPENED' or USAR_Status like 'WORKING')
    group by to_char(close_date, 'DD-MON-YY')
    order by 3, 1 desc;
    The above select statement's results...
    Status Value DATE
    Open 6 02-JAN-08
    Closed 3 02-JAN-08
    Closed 1 03-JAN-08
    Open 1 04-JAN-08
    Closed 1 04-JAN-08
    Closed 1 05-JAN-08
    Open 3 07-JAN-08
    Closed 2 07-JAN-08
    Open 3 08-JAN-08
    Closed 1 08-JAN-08
    Open 1 09-JAN-08
    But I need this instead...
    Status Value DATE
    Open 6 02-JAN-08
    Closed 3 02-JAN-08
    <----- Open 0 03-JAN-08
    Closed 1 03-JAN-08
    Open 1 04-JAN-08
    Closed 1 04-JAN-08
    <----- Open 0 05-JAN-08
    Closed 1 05-JAN-08
    Open 3 07-JAN-08
    Closed 2 07-JAN-08
    Open 3 08-JAN-08
    Closed 1 08-JAN-08
    Open 1 09-JAN-08
    <----- Close 0 09-JAN-08
    Any help would be more appreciative.

    Thank you...You all are great. While I'm still
    looking at the various ways you all provided, from
    what I have looked at so far, they don't address
    05-JAN-08 which has a null open date. There are
    three possiblities, maybe four. Does 05-JAN-08 have a null open date in the data you supplied?
    You showed us:
    OPEN_DATE CLOSE_DATE
    02-JAN-08 02-JAN-08
    02-JAN-08 02-JAN-08
    02-JAN-08 02-JAN-08
    02-JAN-08 03-JAN-08
    04-JAN-08 04-JAN-08
    05-JAN-08
    07-JAN-08
    07-JAN-08 07-JAN-08
    07-JAN-08 07-JAN-08
    08-JAN-08 08-JAN-08
    08-JAN-08
    02-JAN-08
    02-JAN-08
    08-JAN-08
    09-JAN-08
    which looks like they all have open dates.
    Perhaps, if there was null open dates you should have used [code][/code] or [pre][/pre] tags around your data so it looked something like
    OPEN_DATE CLOSE_DATE
    02-JAN-08 02-JAN-08
    02-JAN-08 02-JAN-08
    02-JAN-08 02-JAN-08
    02-JAN-08 03-JAN-08
    04-JAN-08 04-JAN-08
              05-JAN-08
    07-JAN-08
    07-JAN-08 07-JAN-08
    07-JAN-08 07-JAN-08
    08-JAN-08 08-JAN-08
    08-JAN-08
    02-JAN-08
    02-JAN-08
    08-JAN-08
    09-JAN-08And then it would have required the ANSI outer join in my query to allow for outer joining on more than one column...
    SQL> ed
    Wrote file afiedt.buf
      1  WITH t as (SELECT to_date('02-JAN-2008','DD-MON-YYYY') as open_date, to_date('02-JAN-2008','DD-MON-YYYY') as closed_date from dual union all
      2             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
      3             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('02-JAN-2008','DD-MON-YYYY') from dual union all
      4             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), to_date('03-JAN-2008','DD-MON-YYYY') from dual union all
      5             SELECT to_date('04-JAN-2008','DD-MON-YYYY'), to_date('04-JAN-2008','DD-MON-YYYY') from dual union all
      6             SELECT NULL, to_date('05-JAN-2008','DD-MON-YYYY') from dual union all
      7             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), NULL from dual union all
      8             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
      9             SELECT to_date('07-JAN-2008','DD-MON-YYYY'), to_date('07-JAN-2008','DD-MON-YYYY') from dual union all
    10             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), to_date('08-JAN-2008','DD-MON-YYYY') from dual union all
    11             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
    12             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
    13             SELECT to_date('02-JAN-2008','DD-MON-YYYY'), NULL from dual union all
    14             SELECT to_date('08-JAN-2008','DD-MON-YYYY'), NULL from dual union all
    15             SELECT to_date('09-JAN-2008','DD-MON-YYYY'), NULL from dual)
    16      ,all_dates as (select minod+rownum-1 as dt
    17                     from   dual, (select min(open_date) minod, max(open_date) maxod from t)
    18                     connect by rownum <= maxod-minod+1)
    19      ,stat as (select 'open' as status from dual union all select 'closed' from dual)
    20  -- END OF DATA
    21  select all_dates.dt, stat.status, sum(decode(decode(stat.status, 'open', t.open_date, t.closed_date), all_dates.dt, 1, 0)) as cnt
    22  from   stat JOIN all_dates ON (1=1)
    23         LEFT OUTER JOIN t ON (NVL(t.open_date, NVL(t.closed_date, all_dates.dt)) = all_dates.dt)
    24  group by all_dates.dt, stat.status
    25* order by 1,2 desc
    SQL> /
    DT        STATUS        CNT
    02-JAN-08 open            6
    02-JAN-08 closed          3
    03-JAN-08 open            0
    03-JAN-08 closed          0
    04-JAN-08 open            1
    04-JAN-08 closed          1
    05-JAN-08 open            0
    05-JAN-08 closed          1
    06-JAN-08 open            0
    06-JAN-08 closed          0
    07-JAN-08 open            3
    07-JAN-08 closed          2
    08-JAN-08 open            3
    08-JAN-08 closed          1
    09-JAN-08 open            1
    09-JAN-08 closed          0
    16 rows selected.
    SQL>Make your requirements clear in the future.

  • Help with nested select query

    Here is my code , i dont have any experience with writing the nested sql , i got the below code , which needs to be modified adding a case statement which will show util_rate for 2 conditions
    1. given in where condition ( to_char(time_stamp,'HH24') >= '09' and to_char(time_stamp,'HH24') <= '19')
    2.Apposite to the condition above (to_char(time_stamp,'HH24') < '09'and to_char(time_stamp,'HH24') > '19')
    could anybody please help me in adding the 2nd condition to the below query , please share any documentation you have for learning how to write nested sql,
    Thank you
    select device,time_stamp,
    sum(ActiveHRS)/sum(AvailHRS) as RATE
    from
    select device,time_stamp,
    case when usage >0 then 1
    else 0 end as ActiveHRS,
    '1' as AvailHRS
    from
    select device,time_stamp,
    sum(case
    when state = 9 then 0
    when state = 0 then 0
    else 1 end) as usage
    from A
    where to_char(time_stamp,'HH24') >= '09'
    and to_char(time_stamp,'HH24') <= '19'
    and to_char(time_stamp, 'D') in (2,3,4,5,6)
    group by device, time_stamp
    group by device,time_stamp

    Here is the DDL :
    desc rumi_all
    Name     Null   Type    
    RUMI_DEVICE      VARCHAR2(20)
    STATE         NUMBER(38) 
    TIME_STAMP      DATE     
    LOCATION       VARCHAR2(50) Here is some sample data :
    RUMI_DEVICE   STATE   TIME_STAMP    LOCATION
    10.45.28.86     0     15-JUN-10      WA-102
    10.45.28.51     0     15-JUN-10      WA-102
    10.45.28.63     0     15-JUN-10      WA-102
    10.45.29.47     9     15-JUN-10      WA-120I used the below query to get the util for the hours 9am - 7pm
    select rumi_device,time_stamp,
    sum(ActiveHRS)/sum(AvailHRS) as RATE
    from
    select rumi_device,time_stamp,
    case when usage >0 then 1
    else 0 end as ActiveHRS,
    '1' as AvailHRS
    from
    select rumi_device,time_stamp,
    sum(case
    when state = 9 then 0
    when state = 0 then 0
    else 1 end) as usage
    from rumi_all
    where to_char(time_stamp,'HH24') >= '09'
    and to_char(time_stamp,'HH24') <= '19'
    and to_char(time_stamp, 'D') in (2,3,4,5,6)
    group by rumi_device, time_stamp
    group by rumi_device,time_stamp
    Acquired Out for the above query :
    RUMI_DEVICE      TIME_STAMP     UTIL_RATE
    10.45.29.47     15-JUN-10       0.234
    10.45.28.63     15-JUN-10             0.123
    10.45.29.47     15-JUN-10             0.987
    10.45.29.47     16-JUN-10             0.23Desired output :I want 2 extra columns which shows util rate for the above condition i.e 9am - 7pm(core hours) and also opposite to that condition after 7pm - before 9am(say, non core hours)
    Desired out put :
    RUMI_DEVICE TIME_STAMP  Core_Util_Rate   Non_Core_UtilRate
    10.45.29.4    15-JUN-10       0.234              0.003
    10.45.28.63   15-JUN-10     0.123              0.001
    10.45.29.47   15-JUN-10              0.987              0.023
    10.45.29.47   16-JUN-10              0.23                  0Hope this helps in answering my question , and also could you please share some document to learn writing nested sql's , i always had tough time in understanding this :-(

  • Need help with cursor selection in control panels

    I can't get my cursor to work in the control panel at the top of the screen, for example, when I select text and want to change the font size, etc.  It won't even select to change from font to paragraph mode.  Other issues are trying to choose the selection tool, which I can only do with the "V" shortcut tool--escape doesn't work, nor does the cursor choose the  icons.  Help!

    Windows? see InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

  • Need help with Advanced Selection in MSA

    Hi,
    Has anyone managed to identify how to create additional
    advanced selection criteria using links to existing combo engines ? Documentation on Mobile system maint is limited so looking for some additional help. Some criteria you can run the check against but not all why ? What should go in the hierachy fields and how do you select the choice list values ?
    Thanks in advance
    M

    Hi,
    Thanks,my issue is I want to use the combo box so the user can select from the drop down the relevant code from the choice list. Not rocket science really.
    Example of sql generated for profession whch is kna1 field.
    select  KNA1.TITLE,KNA1.SFAKNA2,KNA1.SFAKNA1,KNA1.PROFRESSION as PROFESSION,KNA1.PAFKT,KNA1.NAME2,KNA1.NAME1,KNA1.KVTGRP,KNA1.KVCPPOS,KNA1.KUNNR,KNA1.KTOKD,KNA1.BPACT,KNA1.ANRED,KNA1.ABTNR,ADRC.TELNR_LONG,ADRC.STREET,ADRC.POST_CODE1,ADRC.CITY1,ADRC.ADRCDFLT,ADDR.SFAKNBP , (KNA1.PROFESSION ='MIC') as ReturnValue1 from SMOKNA1 KNA1,SMOADRC ADRC,CDBD_ADDREXT ADDR where kna1.deleted='0' and KNA1.Source='CON' and ADRC.deleted='0' and ADDR.deleted = '0' and (ADRC.ADRCDFLT='S' or ADRC.ADRCDFLT='P') and (1=1) and kna1.sfakna1=adrc.sfakna1 and adrc.sfaadrc = addr.sfaadrc order by kna1.name1
    Code fails !
    I have set VAR1 as a free Combo with Bdoc as Choice, segment as Choice List with fields chkey/Textx so hiearchy fields looks like this //*/Profession hiearchy params being mandt/spras/list
    It will not check is this because there is an error in this definition ?
    Regards
    MM

  • Help with doing SELECT sub query within the SET of an UPDATE statement

    After doing some research, it appears as if it's possible to use a SELECT subquery in the SET of an UPDATE statement.  i did find some examples and here is my code, however when I click the "check" button it's saying the field (my entire select subquery) is unknown and neither in one of the specified tables or defined by a "DATA".  Do I have a syntax issue or is there another reason why it's not taking this as a valid statement?  Thanks for the help!
    LOOP AT IT_DATA
    UPDATE /BIC/AZDP_O0140
       SET /BIC/ZCOUNTER = (SELECT COUNT( DISTINCT MATERIAL )
                            FROM /BIC/AZDP_O0140
                            WHERE MATERIAL EQ IT_DATA-MATERIAL
                            GROUP BY MATERIAL).
    ENDLOOP.

    my Update does indeed have a WHERE clause but because of the issue i'm having, all my criteria in my WHERE is black text in the ABAP editor.  The editor doesn't even recognize the keywords "WHERE" or "EQ".  Below is my entire statement which contains all WHERE criteria in both the Update and the Subquery, i've just removed it for testing to help simplify the query and eliminate as many other factors as posisble that may be causing problems:
    LOOP AT IT_DATA.
       UPDATE /BIC/AZDP_O0140
       SET /BIC/ZCOUNTER = (SELECT COUNT( DISTINCT MATERIAL ) FROM /BIC/AZDP_O0140
       WHERE WHSE_NUM EQ IT_DATA-WAREHOUSE
        AND  PLANT EQ IT_DATA-PLANT
        AND  /BIC/ZTRAN_NO EQ IT_DATA-TRANS_NUM
        AND  DELIV_NUMB EQ IT_DATA-DELIVERY
        AND  MATERIAL EQ IT_DATA-MATERIAL
        GROUP BY MATERIAL)
       WHERE WHSE_NUM EQ IT_DATA-WAREHOUSE
        AND  PLANT EQ IT_DATA-PLANT
        AND  /BIC/ZTRAN_NO EQ IT_DATA-TRANS_NUM
        AND  DELIV_NUMB EQ IT_DATA-DELIVERY
        AND  MATERIAL EQ IT_DATA-MATERIAL.
    ENDLOOP.
    i should also mention the sources i found were not within the SAP Library but instead on other third-party ABAP websites.  so because i was having issues i wanted to post here to see if anyone else has come up with a working solution.  but if this cannot be done i can likely come up with a solution for my needs using multiple internal tables, this would just have been much easier since i can get a query like this to do what i want in SQL Server.  Thought i could utilize this in ABAP as well.

  • Help with idoc-file scenario

    Hello,
    I am doing IDOC - File scenario.
    (source is DEBMAS and reciever end, there is flat DT with no heirarchies as of now. )
    The requirement is that  if the segment at the source side has multiple lines of " sold to party " values, then customer bill should also have multiple lines with account number different for each line. Can I acheive this using "split by value"?  if yes please help me.
    Regards,
    Haritha

    Use the sold-to-party node to create the row node of the file...if some of the elements in the  sold to party node have to duplicated/repeated use the one as many function.

  • Help with IDOC acknowledgement

    Hi,
    We are using version 4.6.c to interface SAP to a non-SAP system. When we are sending the IDOC to the RFC destination, the system says that the "Data passed to port OK". However, our non-SAP partner says that they have not received any data.
    My question here is what and how to setup in order to monitor status of the idocs we have sent to our partner.
    Any assistance is very much appreciated and will be rewarded with points.
    Thanks.
    Kind Regards,
    Darwin V. Cabrillas

    Hi,
    It seemed that you have a similar scenario as ours. How then should I know that our Program ID is wrong? Do we need to activate it or set it up somewhere??
    Also, I tried running RBDSTATE. I put in the logical system and dates as my parameters. But the system prompts only "No data relevant to audit were selected.". What do I need to setup in order for ALEAUD to work?
    In the Parter Profiles (WE20), I have added ALEAUD as an outbound message type and identified the RFC Port. Is this settings enough?
    Thanks.
    Kind Regards,
    Darwin

Maybe you are looking for