Help with image selection/fade

Hi, I'm using Flash 8 and I'm a newbie to actionscript.
I have to create a flash document that will allow me to swap
out colors, patterns, and hardware on our collars. I found a thread
posted
here
that was pretty much what I was looking for. I altered the files to
use my images, so I have the transitions working for colors. When
you select an image from one set of buttons, I would like that
image to stay put while you make your selection from the second set
of buttons. Right now, you can click on button 1 in the top left
corner to select a small collar and as soon as you click the large
button 1 on the right, the small image disappears and vice versa.
How would I make the small collar selection stay put when you
click on the large collar buttons?
In the end I will want it to work like
this
Could someone look at my
file and see if
they can give me some insight as to what is wrong?
Thanks!

Thanks for your response. I wanted to show you the latest
files to
get some feedback on the best route to go. Will your method work
for the color buttons rollovers in this as well. I'm really stuck
at this point and could use some serious help.
What I want to happen is this:
When you roll over a color swatch: the black outline around
the color swatch fades in
When you click and release: the collar image changes and the
black outline around the color swatch stays on until you click
another color swatch
When you rollout: the outline fades out unless the swatch was
clicked.
Please look at the files to see what is happening now.
I could really use some help. If you don't have time to check
out the files, I also attached the code to review if that is
faster.
Thanks,
jay

Similar Messages

Help with image ready on ps3 extended

I am pretty new to photo shop and have cs3 extended.
I have a Yorkie website where I cut out my Yorkies and paste them to differnet backgrounds.... a lady that does the ANIMATED pictures HAS DID A COUPLE FOR ME ....BUT I NEED TO LEARN TO DO THIS MYSELF. She will not tell folks how to do:)
The problem is once you work with a pic that is animated already then try to add a dog.....by pasting....it removes the animation in the background pic.... and the picture no longer moves once the dog is added ?....She said she puts thru IMAGE READY...which I do not see anywhere on CS3 extended. I will try to insert a pic she did for me and any help would be greatly appreciated....as I can do but then the picture is no longer animated once altered in my photoshop but she is doing somehow.....so has to be poss ? If I were to do this pic it would stop moving once the dogs were added....plus not as good as her but practicing........could it be the fact she is doing in layers and I am doing copy and paste...I do know she puts thru Image ready and I do not know where this is located on cs3 extended or how to do?
am

well...........l when I try to open Gif with the import and chose the video frames to layers...am getting a message saying I need Quicktime 7.1 to be able to do??? and when selecting import that is the only option I have to open my animated picture?...YOU HAVE BEEN SO MUCH HELP! THANK YOU SO MUCH...!
BLUE MONDAY EXCLUSIVES
Date: Sat, 17 Apr 2010 20:23:27 -0600
From: [email protected]
To: [email protected]
Subject: Re: Help with image ready on ps3 extended
I'm not sure anyone mentioned this but if not to open GIFs using the import you have to enter the GIF name as GIF isn't listed as one of the options.
It sounds like you are viewing the images in a maximized screen mode. To view more than one document, press F to cycle through the screen modes. FYI, only the contents of the currently selected document can be viewed in the layers palette.
I'll just talk about copy/paste so as not to confuse...
If you are going to copy/paste, click the frame around the dog document to target it. Your layers palette will now contain the contents of the dog document. Click on the layer in the layers palette with the selected dog over transparency. With that layer highlighted in your layers palette, press Ctrl A; then Ctrl C. (Select<Select All; Edit<copy if you prefer using the menu.) This will copy that layer into your clipboard.
Next, click the frame of the document containing the animation. Click the topmost layer in the layers palette because we want you dog to be in the top layer. Press Ctrl + V. (Edit<Paste if you prefer using the menu).
Your dog is most likely going to be too big. Use Edit<Free Transform to size and move the dog to the desired location.
At this point, your dog should be showing in each frame in the animation palette.
Example:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/25315/with-palettes-open.jpg
I'm using the older Image Ready me method. The highlighted place in the palette is where you switch methods between the old method and the new timeline. Notice, I have the layers and animation palette both in the workspace...and I'm not in a maximized mode. The red arrow shows the correlation between the frame and the layer represented by it in the layers palette.
Image:second-image.jpg
Here I have a second image to slip into my animation. I have the creature selected and on it's own layer with transparency around it. Notice that the the layer with the isolated creature is highlighted. At this stage, I'll press Ctrl + A; then Ctrl + C to select and save this image to my clipboard.
Image:creature-added.jpg
Here, I've pasted (Ctrl + V or Edit<Paste) in my creature and resized it (Ctrl + T or Edit<free transform) so he can be jumped. I also added a shadow under my creature which I added to a layer under my creature. Notice that when Frame on is selected in the animation palette that the eye is on both the creature and the shadow. If I click the eye to turn them (creature and shadow layer) off, they disappear from the entire animation. I can make them appear at any frame by clicking the desired frame in the animation then turning on the eye icon for the creature and shadow layer in the layers palette. I can also adjust opacity if desired.
You could even more than the one image if you want the dog to appear to move. Use the eyeball visibility to determine which pose will be used for that frame.
Example:
Image:jump-creature-gif.gif
Here, I used transform warp to adjust the pose of the creature for a few frames as he's jumping the creature...just for fun.
>

I need help with XML Gallery Fade in out transition. somebody please help me :(

I need help with XML Gallery Fade in out transition. somebody please help me
I have my post dont want to duplicate it

The problem doesn't lie with your feed, although it does contain an error - you have given a non-existent sub-category. You need to stick to the categories and sub-categories listed here:
http://www.apple.com/itunes/podcasts/specs.html#categories
Subscribing to your feed from the iTunes Store page work as such, but the episodes throw up an error message. The problem lies with your episode media files: you are trying to stream them. Pasting the URL into a browser produces a download (where it should play the file) of a small file which does not play and in fact is a text file containing (in the case of ep.2) this:
[Reference]
Ref1=http://stream.riverratdoc.com/RiverratDoc/episode2.mp3?MSWMExt=.asf
Ref2=http://70.33.177.247:80/RiverratDoc/episode2.mp3?MSWMExt=.asf
You must provide a direct link to the actual mp3 file. Streaming won't work. The test is that if you paste the URL of the media file (as given in the feed) into the address bar of a browser it should play the file.

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Help with image viewer

Would love some help with this one.. I am new so please bare with me. This app just reads contents of a txt file. What I am trying to add is the ability to display an image inside the program frame with scrolls bars.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
public class Viewer extends JFrame
   private JMenuBar menuBar;
   private JMenu fileMenu;
   private JMenu fontMenu;
   private JMenuItem newItem;
   private JMenuItem openItem;
   private JMenuItem saveItem;
   private JMenuItem saveAsItem;
   private JMenuItem exitItem;
   private JRadioButtonMenuItem monoItem;
   private JRadioButtonMenuItem serifItem;
   private JRadioButtonMenuItem sansSerifItem;
   private JCheckBoxMenuItem italicItem;
   private JCheckBoxMenuItem boldItem;
   private String filename;
   private JTextArea editorText;
     private JLabel label;
   private final int NUM_LINES = 20;
   private final int NUM_CHARS = 40;
   public Viewer()
      setTitle("Viewer");
      setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      editorText = new JTextArea(NUM_LINES, NUM_CHARS);
      editorText.setLineWrap(true);
      editorText.setWrapStyleWord(true);
      JScrollPane scrollPane = new JScrollPane(editorText);
      add(scrollPane);
      buildMenuBar();
      pack();
      setVisible(true);
   private void buildMenuBar()
      buildFileMenu();
      buildFontMenu();
      menuBar = new JMenuBar();
      menuBar.add(fileMenu);
      menuBar.add(fontMenu);
      setJMenuBar(menuBar);
   private void buildFileMenu()
      newItem = new JMenuItem("New");
      newItem.setMnemonic(KeyEvent.VK_N);
      newItem.addActionListener(new NewListener());
      openItem = new JMenuItem("Open");
      openItem.setMnemonic(KeyEvent.VK_O);
      openItem.addActionListener(new OpenListener());
      saveItem = new JMenuItem("Save");
      saveItem.setMnemonic(KeyEvent.VK_S);
      saveItem.addActionListener(new SaveListener());
      saveAsItem = new JMenuItem("Save As");
      saveAsItem.setMnemonic(KeyEvent.VK_A);
      saveAsItem.addActionListener(new SaveListener());
      exitItem = new JMenuItem("Exit");
      exitItem.setMnemonic(KeyEvent.VK_X);
      exitItem.addActionListener(new ExitListener());
      fileMenu = new JMenu("File");
      fileMenu.setMnemonic(KeyEvent.VK_F);
      fileMenu.add(newItem);
      fileMenu.add(openItem);
      fileMenu.addSeparator();
      fileMenu.add(saveItem);
      fileMenu.add(saveAsItem);
      fileMenu.addSeparator();
      fileMenu.add(exitItem);
   private void buildFontMenu()
      monoItem = new JRadioButtonMenuItem("Monospaced");
      monoItem.addActionListener(new FontListener());
      serifItem = new JRadioButtonMenuItem("Serif");
      serifItem.addActionListener(new FontListener());
      sansSerifItem =
              new JRadioButtonMenuItem("SansSerif", true);
      sansSerifItem.addActionListener(new FontListener());
      ButtonGroup group = new ButtonGroup();
      group.add(monoItem);
      group.add(serifItem);
      group.add(sansSerifItem);
      italicItem = new JCheckBoxMenuItem("Italic");
      italicItem.addActionListener(new FontListener());
      boldItem = new JCheckBoxMenuItem("Bold");
      boldItem.addActionListener(new FontListener());
      fontMenu = new JMenu("Font");
      fontMenu.setMnemonic(KeyEvent.VK_T);
      fontMenu.add(monoItem);
      fontMenu.add(serifItem);
      fontMenu.add(sansSerifItem);
      fontMenu.addSeparator();
      fontMenu.add(italicItem);
      fontMenu.add(boldItem);
   private class NewListener implements ActionListener
      public void actionPerformed(ActionEvent e)
         editorText.setText("");
         filename = null;
   private class OpenListener implements ActionListener
      public void actionPerformed(ActionEvent e)
         int chooserStatus;
         JFileChooser chooser = new JFileChooser();
         chooserStatus = chooser.showOpenDialog(null);
         if (chooserStatus == JFileChooser.APPROVE_OPTION)
            File selectedFile = chooser.getSelectedFile();
            filename = selectedFile.getPath();
            if (!openFile(filename))
               JOptionPane.showMessageDialog(null,
                                "Error reading " +
                                filename, "Error",
                                JOptionPane.ERROR_MESSAGE);
      private boolean openFile(String filename)
         boolean success;
         String inputLine, editorString = "";
         FileReader freader;
         BufferedReader inputFile;
               label = new JLabel();
                add(label);
         try
            freader = new FileReader(filename);
            inputFile = new BufferedReader(freader);
            inputLine = inputFile.readLine();
            while (inputLine != null)
               editorString = editorString +
                              inputLine + "\n";
               inputLine = inputFile.readLine();
            editorText.setText(editorString);
            inputFile.close();
            success = true;
         catch (IOException e)
            success = false;
         return success;
   private class SaveListener implements ActionListener
      public void actionPerformed(ActionEvent e)
         int chooserStatus;
         if (e.getActionCommand() == "Save As" ||
             filename == null)
            JFileChooser chooser = new JFileChooser();
            chooserStatus = chooser.showSaveDialog(null);
            if (chooserStatus == JFileChooser.APPROVE_OPTION)
               File selectedFile =
                             chooser.getSelectedFile();
               filename = selectedFile.getPath();
         if (!saveFile(filename))
            JOptionPane.showMessageDialog(null,
                               "Error saving " +
                               filename,
                               "Error",
                               JOptionPane.ERROR_MESSAGE);
      private boolean saveFile(String filename)
         boolean success;
         String editorString;
         FileWriter fwriter;
         PrintWriter outputFile;
         try
            fwriter = new FileWriter(filename);
            outputFile = new PrintWriter(fwriter);
            editorString = editorText.getText();
            outputFile.print(editorString);
            outputFile.close();
            success = true;
         catch (IOException e)
             success = false;
         return success;
   private class ExitListener implements ActionListener
      public void actionPerformed(ActionEvent e)
         System.exit(0);
   private class FontListener implements ActionListener
      public void actionPerformed(ActionEvent e)
         Font textFont = editorText.getFont();
         String fontName = textFont.getName();
         int fontSize = textFont.getSize();
         int fontStyle = Font.PLAIN;
         if (monoItem.isSelected())
            fontName = "Monospaced";
         else if (serifItem.isSelected())
            fontName = "Serif";
         else if (sansSerifItem.isSelected())
            fontName = "SansSerif";
         if (italicItem.isSelected())
            fontStyle += Font.ITALIC;
         if (boldItem.isSelected())
            fontStyle += Font.BOLD;
         editorText.setFont(new Font(fontName,
                                fontStyle, fontSize));
   public static void main(String[] args)
      Viewer ve = new Viewer();
}I tried using JLabel() but I cant seem to make it work. Whenever i browse and select a .jpg it displays "��t��o\�[��+�p��B3�+�p��B3�"

In the future, Swing related questions should be posted in the Swing forum.
Whenever i browse and select a .jpg it displays "��t��o\�[��+�p��B3�+�p��B3�" You can read in a jpg file and treat it like a text file.
Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/icon.html]How to Use Icons for the proper way to read images.

Help with images in Spry menus

I need help making this work: I want my menu buttons and
submenu buttons to be images rather than text. I've been able to
set it up to use different images for each of the main and
sub-level buttons, but only for the active state. I cannot figure
out how to use a different set of "hover images" for the hover
state. Note-- Each button and submenu button in the entire menu are
different images, so I suspect I need to use different ID's for
each, but I am not sure how to set that up in the
SpryMenuBarHorizontal.css file for each different button in, at
least, the active and hover states. Can anyone offer some help with
this?:

V1 - Thank you for the suggestion, but this does not exactly
solve my dilemma. In its simplest terms, this is what I want to do:
Create a single drop-down menu where there is "Item 1" with
submenus "Item 1.1", "Item 1.2", and "Item 1.3". But, I want to use
different images for each item and subitem in their Active and
Hover states. So, in this example, there would be 8 different
images... An Active and a Hover image for each of Item 1, Item 1.1,
Item 1.2 and Item 1.3.

[CS3][JS] Help with image resizing

I'm still a newbie of ID scripting.
I'm using js scripting in Indesign CS3 to make an auto-impaginator and I have a problem with images.
I charged my contents from an xml set of tables, that I put into a fixed textFrame of the master page.
Because of the table needs to fill multiple pages, I made a function that keep creating pages and link the textFrames so that the table continues in various pages.
In this whole process I have some images too, that I need to resize them to fill the cell, because now they pass the parent cell.
I found a method that looks at the bounds and resizes the image and the rectangle too, but it doesn't work always, because if a image is overflowing, it hasn't any bound and it fails, and this causes other problems in my process, so I would find another method.
So:
Is there another way to resize an image on-the-way while importing it? Some xml attribute or preference?
Or some method that works also if the image is overflowing?

These forums are pointless. Adobe must believe that other users will cut the mustard. Absolutely a waste of effort for everyone. Adobe should PAY at least a junior developer involved in the projects to monitor and help with these posts. FLEX rules yeah and thousands more do scripting than develop plug ins...
Come on Adobe, step up your better than this. Customer Service can be free to the customers ... we are not talking about GET IT ALL FREE, talking about buy it and create a community and support it, but then again LAYERS and INDESIGN SECRETS have people who actually want to help users rather than rabbit hole everything.
Please join hands and SING...

Urgent Help with Image Gallery

Hi,
I really need help with an image gallery i have created. Cannot think of a resolution
So....I have a dynamic image gallery that pulls the pics into a movie clip and adds them to the container (slider)
The issue i am having is that when i click on this i am essentially clicking on all the items collectively and i would like to be able to click on each image seperately...
Please see code below
var xml:XML;
var images:Array = new Array();
var totalImages:Number;
var nbDisplayed:Number = 1;
var imagesLoaded:int = 0;
var slideTo:Number = 0;
var imageWidth = 150;
var titles:Array = new Array();
var container_mc:MovieClip = new MovieClip();
slider_mc.addChild(container_mc);
container_mc.mask = slider_mc.mask_mc;
function loadXML(file:String):void{
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest(file));
xmlLoader.addEventListener(Event.COMPLETE, parseXML);
function parseXML(e:Event):void{
xml = new XML(e.target.data);
totalImages = xml.children().length();
loadImages();
function loadImages():void{
for(var i:int = 0; i<totalImages; i++){
var loader:Loader = new Loader();
loader.load(new URLRequest("images/"+String(xml.children()[i].@brand)));
images.push(loader);
//      loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onProgress);
     loader.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete);
function onComplete(e:Event):void{
imagesLoaded++;
if(imagesLoaded == totalImages){
createImages();
function createImages():void{
for(var i:int = 0; i < images.length; i++){
var bm:Bitmap = new Bitmap();
bm = Bitmap(images[i].content);
bm.smoothing = true;
bm.x = i*170;
container_mc.addChild(bm);
      var caption:textfile=new textfile();
      caption.x=i*170; // fix text positions (x,y) here
   caption.y=96;
      caption.tf.text=(xml.children()[i].@brandname)
      container_mc.addChild(caption);

yes, sorry i do wish to click on individual images but dont know how to code that
as i mentioned i have 6 images that load into an array and then into a container and i think that maybe the problem is that i have the listener on the container so when i click on any image it gives the same results.
what i would like is have code thats says
if i click on image 1 then do this
if i click on image 2 then do something different
etc
hope that makes sense
thanks for you help!

Help with images.....pliiiizzzzzz

Im new to java and need help inserting images on a GUI! Does anyone have any programs or snippets of code that've done this successfully - preferrably using the GridBagLayout as well as in swing? If you have anything that works well, feel free to send me the entire java file ([email protected]) or just post it!

Just create a JLabel with an image icon and you are able to display any JPEG and GIF image. You might take a look at the following:
http://java.sun.com/docs/books/tutorial/uiswing/components/label.html
Hope this helps,
Pierre

Is it possible to make a search help with dynamic selection table?

Hi Experts,
Is it possible to create search helps with dynamic seletion tables means
i dont know the selection table names at the time of creation of search help.
These tables will be determined at runtime.
if yes, Please give an idea how to create and pass the table names at runtime.
Thanks
Yogesh Gupta

Hi Yogesh,
Create and fill your itab and show it with FM F4IF_INT_TABLE_VALUE_REQUEST
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'field to return from itab'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'field on your screen to be filled'
      stepl           = sy-stepl
      window_title    = 'some text'
      value_org       = 'S'
    TABLES
      value_tab       = itab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
Darley

Search help with new selection within if more than 500 entries

Dear all,
I created a new search help and this works fine ... If I compare my search help with a default search help from SAP, I have 1 small feature that not seems to work ... With the default one, it is possible to make a new selection within the search help by clicking on the arrow down :
If I look at my search help, I don't have the possibility to make a new selection :
Does anyone how this can be done ?
Thanks in advance !
Greetz,
Kurt.

HI,
Here are the general steps to get you started.
1. Identify the search help being used (on the ship-to-party field, F1 then Tech Info). I believe you want the collective search help SD_DEBI.
2. Create your own search help with the fields you want to use with SE11, like 'ZDEBI' as an example.
3. Append 'ZDEBI' to SD_DEBI. (Goto->Append Search Help).
4. Clean things up by "Hiding" the old search help. In the 'Included Search Help' tab of the collective search help SD_DEBI, there is a check box that you can tick to hide included search helps.

Help with a select statement from a SQL Server within a DTS !!

Hello Gurus!
I help with the script bellow, when I run it within DTS (in SQL Sever 2000), I got the error Invalid number/or not a valid month.
Please bellow with the WHERE CLASUE '08/01/2001' AND '03/09/2002'
And in the other hand I change this forma to '01-AUG-01' AND
'03-MAR-2002', the DTS start and run witha successful messages, but it does not returns row, which is wrong.
Somebady please help!
Thanks Gurus!
GET Total ANIs with Trafic By Area Code
select
     substr(b.ct_num, 0,3) as Area_Codes,
     COUNT(DISTINCT B.CT_NUM) AS ANIS
from
     wasabi.v_trans A,
     wasabi.V_Sur_Universal B,
     wasabi.V_Sub C,
     wasabi.V_Trans_Typ D
where
     D.Trans_typ = A.Trans_Typ AND
     A.Sur_ID = B.Sur_ID AND
     C.Sub_ID = A.Sub_ID AND
     a.trans_stat != 'X' AND
     a.Trans_DTTM >= '08/01/2001'AND
     a.Trans_DTTM < '03/09/2002 AND
     B.AMA3 = 'PHONE1'
     AND C.SUB_ID not in (100117)
GROUP BY
     substr(b.ct_num, 0,3)
ORDER BY
     Area_Codes

I think that you need a "to_date" function eg
change '08/01/2001' to to_date('08/01/2001','dd/mm/yyyy')

Help with Images Maps,

Hi,
I have an HTML page where an IMG is loaded:
<img src="images/renders/Main_Image.jpeg" alt="Main Image" name="Main_IMG" width="800" height="600" border="0" usemap="#Main_MAP" id="Main_IMG" />
Then I have 4 images maps laid on top of the image:
<map name="Main_MAP" id="Main_MAP">
<area shape="poly" coords="--some numbers--" href="Area1.html" target="_parent" alt="Area1 Button" />
<area shape="poly" coords="--some numbers--" href="Area2.html" target="_parent" alt="Area2 Button" />
<area shape="poly" coords="--some numbers--" href="Area3.html" target="_parent" alt="Area3 Button" />
<area shape="poly" coords="--some numbers" href="Area4.html" target="_parent" alt="Area4 Button"/>
</map>
See Example:
Each area is essentially an invisible button. I want to make it so when the mouse hovers over the areas, I want the background image to display something different. On mouse out of the area, I want the image to go back. When the user clicks the Area, the user is moved to another part of the site.
Area 1 should change Main_Image.jpeg to Main_Image1.jpeg
Area 2 should change Main_Image.jpeg to Main_Image2.jpeg
etc.
I thought I could do this with Images Maps, but I can't figure out how. Is there an easier way? I have Dreamweaver CS4.
Thank you in advance!

Hey CF. Thank you very much for the reply! I thought I was losing my mind trying to figure out a way.
I'll try out the slice and dice approach... where's a turtle when you need one.
Cheers Dude.
S

Help with GBIC selection LH vs ZX

Dear Support,
I now have the estimated Attenuation values from our fibre provider, and wondering if anyone could help with determining if I can utilise the cheaper (LH modules) across the 20 & 15 KM streches.
Thanks in advance (many thanks to Josh for helping out with my previous post - below)
HQ to DC1 = 1310nm: 2.5dB, 1550nm: 2.2dB.
DC1 to DC2 = 1310nm: 14.5dB , 1550nm: 13.1dB
DC2 to HQ = 1310nm: 10.1dB, 1550nm: 9dB
=========================================
Dear Support,
Sorry but new to optical networking, but need some assistance on an upgrade that we are performing.
We currently have two data centres that hold our servers and are planning to upgrade from LES circuits to Gigabit links, and triangulate our topology. (effectively a ring topology)
I have already spoken to our proposed fibre provider and they have provide me with rough distances, but due to one of the data centres being more than 10 km away we need to use ZX based GBICs. Summary of distances below;
HQ -> dc1 (1 2 km)
HQ -> dc2 (15 km)
Dc1 -> dc2 (20 km)
From our HQ to dc1 we will use LH (via a GLC-LH-SM= in a 2970G) and a to dc2 we will use ZX (via a GLC-ZX-SM= in another 2970G)
From DC1 to HQ we will use LH (via a WS-G5486 in a 7204VXR) and a to dc2 we will use ZX (via a WS-G5487 in another 7204VXR)
From DC2 to HQ we will use ZX (via a WS-G5487 in a 7204VXR) and a to dc1 we will use ZX (via a WS-G5487 in another 7204VXR)
Hope this doesnt confuse things more.
Now to the question.
From the Cisco web site it mentions the following;
When shorter distances of single-mode fiber are used, it might be necessary to insert an in-line optical attenuator in the link to avoid overloading the receiver:
A 5-dB or 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the Cisco 1000BASE-ZX GBIC at each end of the link whenever the fiber-optic cable span is less than 15.5 miles (25 km).
We havent yet had the fibre survey performed, but once they have advised me of the attenuation on the link, how should I calculate what level of in-line optical attenuator I should need or should all reputable fibre providers advise me of this detail.
Thanks in advance.
Regards, Adrian

Summary of Optical Levels:
GLC-ZX-SM:
Transmit: 0 to +5
Receive: -23 to 0
GLC-LH-SM:
Transmit: -9.5 to -3
Receive: -20 to -3
G5486:
Transmit: -9.5 to -3
Receive: -20 to -3
G5487:
Transmit: 0 to 5.2
Receive: -24 to -3
Given the above:
HQ -> DC2: maximum receive level will be 5-10.1 = -5.1 dB, which is OK for the G5487
HQ <- DC2: maximum receive level will be 5.2-10.1 = -4.9 dB, which is OK for the GLC-ZX-SM
HQ -> DC1: maximum receive level will be -3-2.5 = -5.5 dB, which is OK for the G5486
HQ <- DC1: maximum receive level will be -3-2.5 = -5.5 dB, which is OK for the GLC-LH-SM
DC1 -> DC2:maximum receive level will be 5.2-14.5 = -9.3 dB, which is OK for the G5487
DC1 <- DC2:maximum receive level will be 5.2-14.5 = -9.3 dB, which is OK for the G5487
Therefore, you do not need attenuators anywhere.
Now, to your next queston. If you used the LH modules, you the minimum possible receive levels now become:
HQ -> DC2: minimum possible receive level will be -9.5-10.1 = -19.6 dB, which is only just OK for the G5486
HQ <- DC2: minimum possible receive level will be -9.5-10.1 = -19.6 dB, which is only just OK for the G5486
DC1 -> DC2: minimum possible receive level will be -9.5-14.2 = -24 dB, which is too low for the G5486
DC1 <- DC2: minimum possible receive level will be -9.5-14.2 = -24 dB, which is too low for the G5486
Therefore, my recommendation is to stick with the ZX modules for these links.
Hope that helps - pls rate the post if it does.
Paresh

Help with image selection/fade

Similar Messages

Maybe you are looking for