Help with mackeeperapp2 hijacking

Using OSX 10.9.3
I was researching websites on Safari.  While reading an article about sites, I clicked on one that I thought would be appropriate.  A new window opened trying to load mackeeperapp2.zeobit.com (which is not mentioned anywhere on the page I was reading) on top of that, a javascript window opened listing the above address and stating "Please consider cleaning your mac from junk." (Pretty sure that wasn't written by someone who speaks English) with a choice to click cancel or ok.  I did neither. But I now have no control over Safari.  I can quit Safari or force quit and open while holding down the shift key but both the original safari window (which is frozen) and the mackeeper window with the javascript open.  I can not get into safari preferences.  I tried logging out then logging back on while holding the shift key, but still if I open safari I get both windows. One forum suggested (for mackeeper - not mackeeperapp2) to go into my library folder and move the com.apple.safari.savedstate folder to the trash, but I cant figure out how to find the library and who knows if that would work since that is old information.  It would be great to solve this problem without losing my bookmarks etc.
Thanks for you help!

Some of those scam pages can be dismissed very easily. Press command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
Close the malicious window or tab.
Re-enable JavaScript and close the preferences dialog.
If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

Similar Messages

  • Help with possible hijacking virus in safari?

    Hi,
    Over the last few weeks I've been having a problem where I will type in the URL of a website, and instead of it loading properly - a completely different site loads. It only happens occasionally and seems to randomly pick when it's going to affect Safari. I'm typing in the URL correctly each time it occurs.
    The websites that I have visited when it appears is facebook, megavideo, commonwealth bank and a few more.
    Sometimes if I reset safari and empty cache it stops the problem for a little while.
    I've also wiped my mac and reinstalled everything but I still keep having this little problem.
    I've posted a grab of when it affects a site. After about a minute of the page below it automatically loads up ebay.
    Just wondering if anyone can help me get rid of this virus or whatever it is that is causing it.
    Thanks in advance.

    It's not a virus; it's a Trojan Horse.
    If you go to http://macscan.securemac.com/files/DNSChangerRemovalTool.dmg and download that and install it, it will remove the Trojan. Just remember to restart your Mac when that program is done, otherwise you'll still have the problem. You should also change your DNS servers to those from OpenDNS (http://www.opendns.com). They're faster than your ISP's DNS servers, and they will offer you protection from various malware and phishing scams.

  • Please help me with Audio Hijack Pro!!!!

    Guys, I am really trying to get my podcast back up and running, but I ran into a weird problem with Audio Hijack not too long ago. I have gotten this to work many times before, so this is nothing new. When I use AHP to hijack my microphones, and then use Garageband to record, after 10 min, I get static on one of my mics. Now, I have purchased this product, so it is totally legit, and I know that the trial gives you static after 10 min, but I have my code and the program took it fine. I have contacted AHP, but they basically had me delete a pref file and then reinstall it. It did not work. Can you think of any other ideas that I can try??? I really want to get this back up and running and it takes AHP a long time to get back to me. PLEASE HELP!
    Thank you!

    I forgot to mention the reason I am using Audio Hijack pro is because i am using 2 usb mics.

  • Need Help with hijacked contact lists

    Hello all, I am new here, so please forgive me if I'm posting to the wrong board...didn't really see anything more appropriate. I have a problem with a hijacked contact list:
    I have three email accounts being forwarded to my BB Curve 8530.  Two from Yahoo and one from AOL.  In each of these accounts (when accessed directly from yahoo.com or aol.com) have different contacts.  Not all of these contacts are in my BB contact list.  The other day, one of my yahoo accounts was somehow hacked, and resulted in one of those spam "drugs for sale" emails being sent to people in my contact list.  Well, when I investigated, I discovered that actually, someone who is not even in that particular accounts contact list, but another account.  How is this possible?
    If that is confusing, here's a better summary (using fake email addresses):
    [email protected] sent a bogus email message to [email protected]
    but, [email protected] is not in [email protected]'s address book.  it is in [email protected]  [email protected] is not listed in my BB device's contact list.
    The only thing I can think os is somehow the BB was hacked, and someone was able to go through all linked contact lists, and send an email across all connected accounts.
    How was this able to happen?  what can I do to stop it?
    thanks!
    Lee

    This is the Welcome and Introductions section, so Greetings, and welcome!
    The 8500 model section would be perfect for your questions,so we'll get it move there.
    Meanwhile,
    leevalon wrote:
    The only thing I can think os is somehow the BB was hacked, and someone was able to go through all linked contact lists, and send an email across all connected accounts.
    Sorry, not possible... UNLESS you gave your BlackBerry to someone to use for a while, during which time they spammed all your contacts. Did you?
    Do you have a Security password set on the device? If you are afraid of the above happening, setting the password will just that impossible.
    But it wasn't hacked.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need help with a currently "in-use" form we want to switch to Adobes hosting service

    Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of.  I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our  "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit"  issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
    We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
    I need to get this right and working for the majority of my users and on any platform and OS.
    You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
    (and you will probably get right to me, unlike my and I'm sure most other folks',  "Adobe phone-in experiences")
    Thank You,
    Michael Corman
    VinylCouture
    Phenix City, Alabama  36869

    Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
    So  I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself,  I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products"  to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
    OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi  & so on)...and if you are still on my site.. go to any  "GO RIGHT TO OUR ORDER PAGE"  button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is,  how do they select their individual colors within that (whatever) pack?... .
    So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a  " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
    So after thinking this all out,  and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
    Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year,  I think...its called http://pdf-fillableforms.com/.
    A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however,  if you're on MAC OSX or similar...
    I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
    OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending"  with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly,  and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add)..,  except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form....  Many folks report to us the following issues that we know of.  First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
    Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
    It almost always generates some kind ( at least one time)  of "error message" which we do warn them about..., telling one,  basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it...  and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
    Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly,  the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4)  If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
    Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that?  Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
    Michael Corman
    VinylCouture.com
    (706) 326-7911

  • Can you help with WebQT stream, Muxed, Export to dv, to iMovie

    Can you help?
    Downloaded several QT video clips, muxed.
    In QT Pro (7.1.2), joined several clips into one QT movie.
    Exported to dv, to iMovie.
    Problem: 1st imported clip plays ok, but remaining joined clips won't. iMovie recognizes entire time length of joined clips, but they just won't play.
    Ideas?
    (P.S. I record audio with Audio Hijack Pro (http://www.rogueamoeba.com/audiohijack/) from original QT clips, then paste into iMovie. This works very well.)

    I found an answer to my issue but I have no idea why it was fixed. A post on another site suggested opening up Garage band and playing a few notes on the on-screen keyboard and them closing the application. What ever settings that invoked, it worked and I can now import video from my original Canon ZR !

  • Help with if statement in cursor and for loop to get output

    I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
    I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
    Here is my cursor:
    /*Cursor for Email procedure. It is working Shows userid and the string
    You need to update these folders*/
    DECLARE
    a_user varchar2(200) := null;
    v_assigneduser varchar2(20);
    v_folderrsn varchar2(200);
    v_emailaddress varchar2(60);
    v_subject varchar2(200);
    Cursor c IS
    SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
    MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
    trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
    --MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
    FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
    WHERE f.foldertype = 'HJ'
    AND f.statuscode NOT IN (20, 40)
    AND f.folderrsn = fp.folderrsn
    AND fp.processrsn = fpa.processrsn
    AND vu.userid = fp.assigneduser
    AND vu.statuscode = 1
    GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
    ORDER BY fp.assigneduser;
    BEGIN
    FOR c1 IN c LOOP
    IF (c1.assigneduser = v_assigneduser) THEN
    dbms_output.put_line(' ' || c1.folderrsn);
    else
    dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
    END IF;
    a_user := c1.assigneduser;
    v_assigneduser := c1.assigneduser;
    v_folderrsn := c1.folderrsn;
    v_emailaddress := c1.emailaddress;
    v_subject := 'Subject: Project for';
    END LOOP;
    END;
    The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
    emailaddress
    Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
    v_folderrsn
    v_folderrsn
    etc
    [email protected]......
    Subject: 'Project for: ' Jim...'not updated in the last 30 days'
    284087
    292709
    [email protected].....
    Subject: 'Project for: ' Kim...'not updated in the last 30 days'
    185083
    190121
    190132
    190133
    190159
    190237
    284109
    286647
    294631
    322922
    [email protected]....
    Subject: 'Project for: Joe...'not updated in the last 30 days'
    183332
    183336
    [email protected]......
    Subject: 'Project for: Sam...'not updated in the last 30 days'
    183876
    183877
    183879
    183880
    183881
    183882
    183883
    183884
    183886
    183887
    183888
    This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
    Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
    JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
    JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
    KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
    KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
    KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
    KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
    KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
    KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
    KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
    KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
    JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
    JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
    SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
    SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
    SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
    PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
    PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
    NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
    NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
    NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
    NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
    NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
    NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
    NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
    NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
    NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
    NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
    NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
    NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
    NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
    NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
    NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
    MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
    [email protected]/27/2004.......3/8/2004............1631
    How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
    Edited by: user4653174 on Aug 25, 2008 2:40 PM

    analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
    CASE
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
    http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
    Incorporating either of these into your query should assist you in returning the desired results.

  • I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

    I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
    Thank you in advance,

    Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

  • Help with HP Laser Printer 1200se

    HP Support Line,
    Really need your assistance.  I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance.   I then sent an e-mail for assistance and got that reply today, the reply is as follows  "Randall, unfortunately, HP does not offer support via e-mail for your product.  However many resources are available on the HP web site that may provide the answer to your inquiry.  Support is also available via telephone.  A list of technical support numbers can be round at the following URL........."  The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
    So here I am looking for your help with my issue.
    We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us).  We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7).  However we use our Laser Printer for all of our regular prining needs.  This is the HP LaserPrinter 1200se, which is about 6 years old but works really well.  For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC.  The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
    We posed the following two questions:
    1.  Is the Laser Jet 1200se compatible with Windows 7?
    and if this is the case
    2.  Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
    We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
    We really would appreciate any assitance that you might give us.
    Thank you,
    Randy and Leslie Gibson

    Sorry, both cannot be enabled by design.  That said, devices on a network do not care how others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Going to Australia and need help with Power converters

    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  

    godzillafan868 wrote:
    Facts:
    US uses 110v on 60hz
    Australia 220v on 50hz
    Making sure I understood that correctly.  Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD.  My DS, and Cell are charging via USB to save trouble of other cables.
    Ideas I've had or thought of:
    1.  Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet.  Not sure if this fixes the voltage/frequency change.
    2.  Get power converters for all my devices.  But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
    3.  Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday).  Unless Best Buy carrys one.  
    Check the specs on input voltage/frequency of your power supplies.
    Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all.  These will just need a connector adapter.
    Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
    For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Creation of context sensitive help with pure FM 12 usage doesn't work

    Hi,
    I hope somebody is able to help me with a good hint or tip.
    I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
    What did I do?
    - I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
    - I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
    #define 2000 2000 /* 4 Anwendungsoberfläche */
    #define 2022 2022 /* 4.1.1 Menü Datei */
    #define 2030 2030 /* 4.1.3 Menü Parametersatz */
    #define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
    #define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
    #define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
    - I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
    #define 2000    1
    #define 2022    2
    #define 2030    3
    #define 2180    4
    #define 2354    5
    #define 2560    6
    - When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
    Example:
    <p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
    What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
    Please help!
    Many thanks
    Mohi

    Hi Jeff,
    thanks for your note!
    The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
    #define 2000 2000.
    Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
    I am still confused :-/
    Thanks
    Mohi

  • Need help with Boot Camp and Win 7

    I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp.  I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
    I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1.  That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
    Thanks.
    Mike

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

    can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw  shows message that Adobe camera raw plugin cannot be found

    That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
    Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
    If you have that file there, try to download the updated camera raw plugin from the below location.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
    In case  you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
    [Moving the discussion to Photoshop General Discussions Forum]

  • Be grateful for your help with Photoshop Elements which I have been using for several years.

    Be grateful for your help with Photoshop Elements which I have been using for several years.  Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements.  On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’.  1. Is there a relationship between Elements and My Pictures and is Elements dependant on    the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more?  Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one?  Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop.  I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue.  I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music.  Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

    The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Maybe you are looking for