Help with Motion Tweens and Designing

So we are basically trying to design part of a website
and we want to have the whole alphabet at the top of the page then we want like one letter to shake
and then fall into a funnel which we want to be in the middle of the page then another letter shakes, then two at a time, the three at a time and after that all the letters fall in.
After that we want the letters to fall out and form and sentence, a few sentences.
That's basically all that was thought about, and we are new to flash so we were looking for any tips, or any help to actually do this
we were trying to mess wit the motion tween but we never figured out how to make it shake how we want it to, so any help will be appreciated.

var growFactor:Number = 0.01;
var shakeFactor:Number = 0;
var xDirection:int = 1;
var yDirection:int = 1;
var control:Number = 2.0;
var MOrigin:Number = M.x;
var OOrigin:Number = O.x;
var IOrigin:Number = I.x;
var TOrigin:Number = T.x;
function shakeIt(evt:Event):void {
     // move A
      M.x = MOrigin + Math.random()*shakeFactor*xDirection*control;
      M.y = MOrigin + Math.random()*shakeFactor*yDirection*control;
      O.x = OOrigin + Math.random()*shakeFactor*xDirection*control;
      O.y = OOrigin + Math.random()*shakeFactor*yDirection*control;
      I.x = IOrigin + Math.random()*shakeFactor*xDirection*control;
      I.y = IOrigin + Math.random()*shakeFactor*yDirection*control;
      T.x = TOrigin + Math.random()*shakeFactor*xDirection*control;
      T.y = TOrigin + Math.random()*shakeFactor*yDirection*control;
      // flip coins to see which way to move things next time
      if(Math.random() < 0.5){
            xDirection *= -1;
      if(Math.random() < 0.5){
            yDirection *= -1;
      // shake a little more each time
      shakeFactor += growFactor;
M.addEventListener(Event.ENTER_FRAME, shakeIt);
O.addEventListener(Event.ENTER_FRAME, shakeIt);
I.addEventListener(Event.ENTER_FRAME, shakeIt);
T.addEventListener(Event.ENTER_FRAME, shakeIt);
The problem is that M is shaking in place where i put him and anothers letters are in strange position down look here  http://robinmd.nm.ru/new/Untitled-1.html  I wold like to put them on one x line whats wrong in the code?=)

Similar Messages

  • Help with Motion Tracking and Masking?

    Hi. First and probably only post here. I've got a bit of an issue....
    I'm trying to create "snapshots" in my video that are created from masks which are then motion tracked and remain stationary. Here's a video of what i'm talking about... http://www.youtube.com/watch?v=9OhVAduuJc8
    The problem I'm running into is that after i motion track the layer, select a null object as the target, duplicate the video layer, mask the object, freeze frame, and pair it to a null layer, the object does not remain stationary as the ones in the video do. Instead it moves WITH the null object and I cant figure out why. I've gotten a tutorial from the guy who made the video, however it's private so i don't know if you guys will be able to see it. http://www.youtube.com/watch?v=zY0QLrMCcGM
    Either way, i followed the tutorial exactly and still to no avail. Are my settings messed up or what exactly is going on? Ive successfully done this project before but now that i'm using CS5, i'm running into these issues. If anyone has any advice i'd gladly try it out and return with the results.
    Thanks so much for trying to help me out.

    Yeah the null is still moving. Will freezing it lock the mask into place while still allowing the footage to play through? And how would i go about "freezing the null"?
    I just dont understand how this person does it in the tutorial, and the mask remains in place. I know you probably can't watch the tutorial cause the user has it set as private, but as far i know his mask stays in place, but uses the null (while still moving) as a tracking device to keep the mask from floating out of control as the camera moves through the shot.
    Sorry if I'm making this rather confusing. It's difficult to explain.
    Maybe it might be easier to explain how you would obtain the result from the video I've posted? Keep in mind I dont have CameraTracker.

  • How to use SOA Suite in conjunction with SOA Analysis and Design Tools

    Hi everybody,
    I am a novice in this field and I need some help regarding integrating analysis and design tools with SOA Suite.
    We used to analyze and design with Oracle Designer and use its powerful form generator to develop a system. It almost covered all the software lifecycle and kept the traceability between anlaysis,design and implementation.
    I have studied about the SOA concepts and read some papaer about SOA Suite. I have also installed the SOA demo based on SOA Suite and I found it absolutely amazing, but my problem is that It seems oracle does not have any tools for SOA Analysis and Design. am I right? if so, How can we analyze and design a system based on SOA concepts and implement it using soa suite in such a way that keeps traceability? What tools is used for this purpose?
    It seems that IBM have some tools like Rational Software Architect and Rational Suite which enable people to design and analyze based on SOA concepts and then generates some pieces of code (like oracle designer in old days) but is it possible to design in these tools and then generating codes for SOA Suite ? (for example generating a bpel file from a design model)
    As I told before I am a novice in this field and I would be so grateful if other users can share their expriences regarding this matter.
    Any help would be highly appreciated.
    Thanks in advance,
    Navid

    Learn About All Things SOA:: SOA India 2007:: IISc, Bangalore (Nov 21-23)
    Aligning IT systems to business needs and improving service levels within the constraints of tight budgets has for long been the topmost challenge for CIOs and IT decision makers. Service-oriented Architecture (SOA) provides a proven strategy to clearly address both of these objectives. Creating more agile information systems and making better use of existing infrastructure are two leading factors that are boosting SOA adoption across large, medium, and small Indian industries from the BFSI, Retail, Telecom, Manufacturing, Pharma, Energy, Government and Services verticals in India. If you are an IT decision maker belonging to any of these verticals, SOA India 2007 (IISc, Bangalore, Nov 21-23 2007) presents a unique opportunity to gather cutting-edge business and technical insights on SOA and other related areas such as BPM, BPEL, Enterprise 2.0, SaaS, MDM, Open Source, and more.
    At SOA India 2007, acclaimed SOA analysts, visionaries, and industry speakers from across the world will show you how to keep pace with change and elevate your IT infrastructure to meet competition and scale effectively. The organisers are giving away 100 FREE tickets worth INR 5000 each to the first 100 qualified delegates belonging to the CxO/IT Decision Maker/Senior IT Management profile, so hurry to grab this opportunity to learn about all things SOA. You can send your complete details, including your designation, e-mail ID, and postal address directly to Anirban Karmakar at [email protected] to enrol in this promotion that is open until 12 October 2007.
    SOA India 2007 will also feature two half-day workshops on SOA Governance (by Keith Harrison-Broninski) and SOA Architecture Deep Dive (by Jason Bloomberg). If you are an IT manager, software architect, project leader, network & infrastructure specialist, or a software developer, looking for the latest information, trends, best practices, products and solutions available for building and deploying successful SOA implementations, SOA India 2007’s technical track offers you immense opportunities.
    Speakers at SOA India include:
    •     Jason Bloomberg, Senior Analyst & Managing Partner, ZapThink LLC
    •     Keith Harrison-Broninski, Independent consultant, writer, researcher, HumanEdJ
    •     John Crupi, CTO, JackBe Corporation
    •     Sandy Kemsley, Independent BPM Analyst, column2.com
    •     Prasanna Krishna, SOA Lab Director, THBS
    •     Miko Matsumara, VP & Deputy CTO, SoftwareAG
    •     Atul Patel, Head MDM Business, SAP Asia Pacifc & Japan
    •     Anil Sharma, Staff Engineer, BEA Systems
    •     Coach Wei, Chairman & CTO, Nexaweb
    •     Chaitanya Sharma, Director EDM, Fair Isaac Corporation
    A partial list of the sessions at SOA India 2007 include:
    •     EAI to SOA: Radical Change or Logical Evolution?
    •     BPEL: Strengths, Limitations & Future!
    •     MDM: Jumpstart Your SOA Journey
    •     Governance, Quality, and Management: The Three Pillars of SOA Implementations
    •     Building the Business Case for SOA
    •     Avoiding SOA Pitfalls
    •     SOA Governance and Human Interaction Management
    •     Business Intelligence, BPM, and SOA Handshake
    •     Enterprise 2.0: Social Impact of Web 2.0 Inside Organizations
    •     Web 2.0 and SOA – Friends or Foe?
    •     Achieving Decision Yield across the SOA-based Enterprise
    •     Governance from day one
    •     Demystifying Enterprise Mashups
    •     Perfecting the Approach to Enterprise SOA
    •     How to Build Cost Effective SOA. “Made in India” Really Works!
    For more information, log on to http://www.soaindia2007.com/.

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • What's the phone number I should call for help with my iPhone and ihome dock?

    What's the phone number I should call for help with my iPhone and ihome dock?

    http://www.ihomeaudio.com/support/

  • Help with photoshop quitting and AMD graphics

    help with photoshop quitting and AMD graphics
    im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

    Hi Chris
    I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
    i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
    its frustrating as i am paying for CC but cant use it!

  • CS5 - problem with motion tween..HELP!!

    Experts out there, please help.
    I have migrated from Flash CS3 to Flash CS5. Unlike in CS3, in CS5 when i use motion tween i am unable to use multiple 'ease in' and 'ease outs' in a single tween span. The tween span has to be divided by the 'split motion' command at 'properties keyframes' into smaller tween spans to further apply ease in/out to each one of them. This is not the case with CS3, you just select one keyframe after another and apply the ease in/out command, no divisions required.
    Lets say i want control the accelaration and deccelaration of a bouncing ball without breaking the tween span. How do I do it in CS5 without wasting all the sweat?
    Please guys i really need this
    I'll be greatful
    Thanks

    The classic tween is the same as the old Motion tween was in CS3 and earlier. You can grab a keyframe and drag it along he timeline to extend or reduce the tween.
    The "new" Motion tween was invented to allow for 3D tweening and to allow you to save the tween action exclusive of the elements that were being tweened, so that you can easily replicate a tween on the timeline.

  • Scaling and rotating with motion tween

    This is a ridiculously easy problem but I'm drawing a mental blank at how to do it so in advance I apologize for the simplicity. I'm trying to get a movie clip to rotate and scale automatically without being clicked. I would like it to gradually rotate by 90 degrees and scale by 150%, but I can't figure out how to get a motion tween to do it and am having to do it manually frame by frame. What is the code to do this?
    Thank you!

    If you are using CS4 or newer, make sure you are using the classic tween for what you described you tried. The only wondering I have is you mentioning a clip twice... if you are inside the movieclip you cannot rotate and scale it from there.  So is there a clip inside the clip, and is it the inner clip that you are trying to tween?  The object you scale and rotate must be a library symbol.

  • Problem with motion tweening in Flash CS4

    Hi !
    I tried to refresh my little flash knowledge -- but I stumbled upon a problem with the new Flash CS4!
    When I try to make different blur or alpha effect on one keyframe I got after making the motion tween -- Flash adjust the other keyframe as well (got the same reaction on both keyframes as if it was the same instance of movie clip -- and not as in old flash; the keyframes created separated or independent instances)
    The only thing working for me is when I move the movie clip out of the stage on the first keyframe -- and it correctly move its position.
    What's wrong?
    Kind Regards
    Maria Olsen

    Hello Maria,
    You sort of answered your own question:)
    "got the same reaction on both keyframes as if it was the same instance of movie clip"
    That is exactly right and is the proper way of looking at new motion tweens. It is one instance of the movieclip for the duration of the tween. It takes awhile to get used to this.
    New motion tweens allow you to set up a a very simple tween initially without keyframing ending values / position. Once you start making changes after the tween is set, you are going to have to get familiar with adding "property keyframes". Property keyframes are displayed with those little diamond icons in the timeline. Poperty keyframes allow you to "lock in" certain specific properties at key points in your animation without affecting other properties. With the old classic keyframes, a keyframe placed mid-tween would create a whole new instance of a symbol with all properties (rotation, scale, alpha etc) set in stone for that point in time. The benefit was that you could easily have all properties tween TO and FROM that keyframe if that's what you wanted. Now you can make adjustments to a symbol mid-tween and only specifically adjust a single property. So you can adjust the alpha of an object mid-tween without interrupting say a rotation that you wanted to happen all the way through.
    If you simply want an object to move left to right and then you decide it should fade in
    CLASSIC TWEEN
    -place symbol on frame 1
    -keyframe frame 10
    -in frame 10 move the symbol to the right
    -add classice tween
    Ok, that works, now add alpha fade in
    -go back to frame 1 and set alpha to 0
    -classice tween automatically adjusts alpha from 0 in frame 1 to 100 in frame 10.
    -done
    MOTION TWEEN
    -place symbol on stage
    -create motion tween
    -playhead jumps to last frame
    -move symbol to the right (no need to f6 / keyframe)
         Flash automatically adds something called a "position" keyframe (notice the little black diamond)
    Ok, that works, now add alpha fade in
    -go to frame 1 and set alpha to 0
    -test movie
    -oops - wrong. As you noted the alpha will stay at 0 throughout the whole tween.
    -you need to additionally go to the last frame and set the alpha back to 100
         -this will automtically create a "color" property keyframe on the last frame
    When just doing this now I noticed something odd as well
    As soon as I do the position change and move the symbol to the right, if I try to add the "color keyframe" on the last frame of the tween, I am not allowed to do so. "color" and "filter" are greyed out. I would prefer to lock the alpha at 100 in the last frame while the playhead is in position before setting it down to 0 in frame 1. Oh well.
    Seems you are forced to
    -go back to the beginning of the tween
    -adjust the alpha
    -then go to the end and manually bring the alpha back up.
    hmm maybe i'm missing something too:)
    the best way to do this would be to have the foresight ahead of time to do the alpha
    -place the symbol
    -alpha 0
    -add motion tween
    -in last frame move the symbol  set alpha to 100 (alpha and position keyframes are automatically set)
    So if you do it right the first time, its easy. If not, well.
    Keep in mind an object will maintain the properties it has set in frame 1 unless a subsequent property keyframe enforces some adjustment.
    If you have have an object that is moving from point a to b to c to d:
    If you alter the alpha at point b, the alpha will tween from point a to b, but will maintain the new alpha to c, to d.
    If you scale the clip by 200% at point, its scale will tween from point a all the way to point d, NOT just from c to d
    To scale from point c to d only, set a "scale" property keyframe at point c (this will lock the objects scale at 100) THEN scale to 200% at point d
    It takes a good deal of practice. I found the hard way that you just can't "wing" it. It isn't very intuitive coming from a classic tween approach.
    These articles really helped me:
    http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html
    http://www.adobe.com/devnet/flash/learning_guide/animation/
    Take note of the tips on "cntr-clicking" frames and "shift-dragging". You have to really get used to a few keyboard modifiers when editing the timeline.
    Stick around the forums. A lot of good info comes through daily.
    Carl

  • Trouble with Motion Tween (Can't find answer)

        Hello,
    I've been having trouble using a motion tween in an animation I'm creating. I have an object (a cartoon character's talking head) that I'm trying to move along a motion tween. At one point I want to make him stop moving for a beat, then continue. However, when I have two keyframes in the same place, the object will move up and down between the two keyframes that have the same position and rotation. When I click on the tween's path, I don't see anything that would make the object move (at least I don't think so, it's a small movement),
    I looked around and couldn't find any fixes on the interwebs. However, it does seem similar to the "boomerang effect" of motion paths in AE. Especially since it appears to only happen when I make the motion paths into a curve.
    I'm using Flash CS4.
    Any help would be greatly appreciated!!

    i'm not arguing with you.  i'm just telling you how to prevent tweening between two frames.
    if you want to do it your way, do it your way.  but, while it may seem obvious to you that there should be no tweening between two keyfames with identical content, it's not obvious to flash especially when you add a motion tween between those two identical keyframes.
    that said, you should double check the two keyframes and make sure the object's properties are indentical (using the properties panel).

  • Move motion tween and custom ease property keyframe at the same time???

    Hello,
    I'm making adjusments to my animation, by "ctl" clicking the motion tween diamond keyframe in the timeline, and moving it.  It works great, except I have a custom ease property set up that has keyframes that correspond to the animation.  When I move a keyframe, they all update and move except for the custom ease keyframes in the motion editor.  Is there a way to do this??  Set it up so that the custom ease keyframes are locked with the other keyframes??
    Any help would be greatly appreciated..
    Thanks,

    Hello,
    Thank you for contacting National Instruments.
    You should be able to control your RS-232 port and DAQ card independently. If you are doing a continuous buffered analog acquisition, then your board should be acquiring analog data continuously regardless of what commands are being sent out on the RS-232 port.
    I imagine that this is a software timing issue. I would recommend that in your code that you configure and start your analog acquisition before you even start the stage's movement. After you have determined that you are acquiring data, you should send commands to stage to begin its movement. After all of the stages movements are complete, you will want to stop and clear your analog input measurement. This will ensure that you will acquire all
    of the data for all of the movements of the stage.
    Regards,
    Bill B.
    Applications Engineer
    National Instruments

  • OBIEE 11G help with report narrative and table view

    Hi,
    I have a report designed like the below, I have used "narrative view" for customer detail and "table view" for order detail. In the narrative view I can say row = 1 and it picks up the first record of the customer detail, but order detail shows all rows. How can I control it so the order detail shows only the detail record of the customer associated. Also how do I go to the second record and so forth. Please help. If this is not possible and if there are any alternates, please let me know. Thanks for your time and help.
    Customer Number:
    Customer Name:
    Customer Address:
    Order Detail:
    Line number | Order No | Order description | Order Status

    ssk1974 wrote:
    Hi,
    I have a report designed like the below, I have used "narrative view" for customer detail and "table view" for order detail. In the narrative view I can say row = 1 and it picks up the first record of the customer detail, but order detail shows all rows. How can I control it so the order detail shows only the detail record of the customer associated. Also how do I go to the second record and so forth. Please help. If this is not possible and if there are any alternates, please let me know. Thanks for your time and help.
    Customer Number:
    Customer Name:
    Customer Address:
    Order Detail:
    Line number | Order No | Order description | Order StatusWhy don't you do this?
    1) Build a dashboard prompt for Customer Number. and save to a PV.
    2) Build a report with all the columns for customer and order (in Criteria View) with a filter for the PV to capture the dashboard prompt.
    3) Build a pivot table with Customer Number and Customer Name in the Rows section. Put the Customer Address in the Measures section and change the Aggregation Rule to Max.
    This will serve as the summary table showing only the information of the customer selected.
    2) Build Pivot Table:2 with the Order details.
    3) In the Compound Layout, put Pivot table one on the top and Pivot Table:2 below it.
    When a customer is selected, you will have the customer data with the order details under it for that customer only.

  • Help with Quiz pages and buttons (please)

    We use Captivate 6 with a subscription. I have put together a couple of modules with question pools, and some with just a few questions pages inserted. The last time I created a new captivate project, I put inserted quiz pages and the buttons were different then they had been before. The first few times they were grey, now they are green and a bit smaller. Looking at the proporties for each page and button, I cannot see anything that is different othe than one is a text button and the other is a transparent button. Both buttons are marked as default quiz button style. I don't use any themes. To make this short, I would like to know if there is a way to make the buttons the same every time I add a page, or a pool? I am not yet up to designing my own buttons, but probably will here shortly. Right now I need to get some training modules completed as quickly as possible so I don't have the time to reinvent the wheel (so to speak). The only other thing that I noticed was different in the projects was that in the skin editor one uses one called [default](modifired) and the other one uses one that I created. HOWEVER, I have another one that uses my custome skin and the buttons are grey on that one which is the same as the default one. I don't think the skin has anything to do with the button look. Correct me gently if I am wrong on this.
    Thanks for the help.

    Just one remark: in CP6 you always use a theme. And quiz slides have their own master slides, that will always be used. The buttons take on the style you see on those master slides, and this style can also be found in the object style manager. Skin and object styles are part of the theme. Probably you have overridden some of the styles defined?
    Lilybiri

  • Need help with Page Layout and Background Scaling

    hello, everyone.
    I am in the process of designing a new website for myself,
    and while I was researching nicely designed pages to use as
    inspiration, I stumbled upon this site:
    http://www.jeffsarmiento.com/
    obviously, the design is very impressive, but it also
    incorporates a lot of web mechanics that I have been trying to
    figure out, so I will use this page as an example.
    one thing I need help with is backgrounds. as you can see in
    the posted website, the creator used a seamlessly tiled paper
    texture to display the bulk of his content on. also make not of the
    pattern that is located to the left of the paper texture. how do I
    create seamless backgrounds like this that will scale to fit any
    amount of content or any resolution? I can't imagine that the guy
    that made that site created a new size background every time he
    made an update, so there has to be an easier way.
    the second thing that I am having trouble with is general
    site layout. I have read that most sites used series of invisible
    tables to organize there content, but when I open the source of
    this page in dreamweaver, he was using something different. div
    tags? should I be using these? who do I use them? are there any
    general layout tips that someone could pass on to me? perhaps a
    link to a good tutorial?
    please help me. i am very confused.
    thanks so much.

    IMO not a good site to emulate. To wit:
    Top background image:
    http://www.jeffsarmiento.com/images/bg-top.jpg;
    745px
    x 350px 137K
    Main background image:
    http://www.jeffsarmiento.com/images/bg-tile.jpg;
    745px x 950px 130K
    Total page size: 454K (Check here:
    www.websiteoptimization.com)
    Website usability experts routinely recommend a maximum page
    size of ~80K
    Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
    they suggest,
    "You speak about yourself approximately 0,003 times as often
    as you speak
    about your customers. Might that have an impact on your
    effectiveness?"
    That is 100% consistent with the #1 Web Design mistake:
    "Believing people
    care about you and your web site." or to phrase more
    expansively, "Our site
    tries to tell you how wonderful we are as a company, but not
    how we're going
    to solve your problems."
    www.sitepoint.com has some excellent books on making a
    website actually
    attractive and usable at the same time.
    Walt
    "beWILLdered_" <[email protected]> wrote in
    message
    news:[email protected]...
    > hello, everyone.
    > I am in the process of designing a new website for
    myself, and while I was
    > researching nicely designed pages to use as inspiration,
    I stumbled upon
    > this
    > site:
    >
    http://www.jeffsarmiento.com/
    > obviously, the design is very impressive, but it also
    incorporates a lot
    > of
    > web mechanics that I have been trying to figure out, so
    I will use this
    > page as
    > an example.
    > one thing I need help with is backgrounds. as you can
    see in the posted
    > website, the creator used a seamlessly tiled paper
    texture to display the
    > bulk
    > of his content on. also make not of the pattern that is
    located to the
    > left of
    > the paper texture. how do I create seamless backgrounds
    like this that
    > will
    > scale to fit any amount of content or any resolution? I
    can't imagine that
    > the
    > guy that made that site created a new size background
    every time he made
    > an
    > update, so there has to be an easier way.
    > the second thing that I am having trouble with is
    general site layout. I
    > have
    > read that most sites used series of invisible tables to
    organize there
    > content,
    > but when I open the source of this page in dreamweaver,
    he was using
    > something
    > different. div tags? should I be using these? who do I
    use them? are there
    > any
    > general layout tips that someone could pass on to me?
    perhaps a link to a
    > good
    > tutorial?
    > please help me. i am very confused.
    >
    > thanks so much.
    >

  • Help with tweaking blog and webform built in Adobe Muse

    Hi there.
    A client of mine had a 3rd party do a re-design (in Adobe Muse) of their current site in BC. Managed to get most of the re-design all launched except for a couple of tweaks that have been giving me major headaches.
    Firstly, is it possible to edit the site that was built in Muse directly from BC itself and not Muse? I don't have a Muse subscription.
    If so, I need help with the following that I have tried to tweak myself, but just can't find out how. BTW I am not a developer but muddle my way around editing existing code etc etc.
    1. On the contact us page, I need to add an additional field to the webform. A radio button question: "preferred contact method". Phone or email. I know how to add the field to the webform in BC. Apparently Muse forms don't support radio buttons? Anyway, I can't figure out how to edit the source on the contact page  to include the fields that I add to the webform.
    2. Some minor tweaks to the layout of the blog page. I need to make the horizontal and vertical lines meet up and not have a space. Also, the left column width needs to be decreased and the right column width increased. Basically I need the current live blog http://www.robertsonburns.com.au/blah-blog to look like the previously coded muse blog (which is not live) http://robertsonburns-test5.businesscatalyst.com/blah.html which it does, except for these two minor issues.
    Would appreciate anyone's help and/or advice.
    Thanks.

    Hey there,
    Yes you just go to the site either via... site.buisnesscatalyst.com/admin or livesite.com/admin
    Once you do that you can login. It depends how it was built though. Properly a site will have content holders and templates and the pages just hold the content. A user can go to those pages, webapps, blogs (dependng on the plan and build of the site) can edit that content.
    Muse is not the best in terms of handling that and making updates, I am aware the Team updated Muse to handle fetching updates etc though but there is a note of caution on that stil though.
    1. What is the plan of the site? If it is just a CC site then there is no web form manager with that plan of BC. You will have to edit and update the form built in Muse.
    If it is on a plan that supports web forms it also depends on how you built it. If in Muse you should be able to just update the form in Muse I think and it posts into the system to update. If not then you need to go into the admin and web form manager and edit the html to make changes. This depends though if the form was inserted as a module, if not you need to navigate to the template or page and update it there once you have added the new fields to the form under the web form itself.
    2. Layouts are managed via SFTP under the folder Layouts or in the admin under Module Templates in the main menu and Blog layouts.

Maybe you are looking for