Help with Photos upload
SO the claim (due to a new commercial) is that the iPhone will upload photos from the iPhone to blogs. I heard Facebook being one of them. How is this done?
While I have not done it, I saw the thread in here very recently (assume a search would find it), but I saw that it said facebook has the instructions. In general they have a way to sign up for it (or activate it on your account) and what it does is gives you and email address to send your pictures to, thus from the iPhone you email it to that address (as that is the way to send photos from the iPhone). .MAC account users have the option as a menu option to upload when viewing a picture.
Similar Messages
-
Help with Photos Uploaded to Facebook?
Hello everyone I am new to the forum and relatively new to MAC.
Can somebody help me with my question.
I have quite a lot of photos stored on my Macbook and and most of the 'albums' are uploaded to facebook too. I would like to know if I deleted some of my album files full of photos - would the ones on Facebook still show up - both on my computer AND on my facebook albums.
I feel if I remove them from my computer then I may lose them off my facebook page too?
I want to burn all my photo's to disk to free up space on my Macbook.
If anyone understands my question and can advise I would be grateful.
Many thanks.
KarenAh thank you TD... but this is not the reply I was hoping for!!! Forgive my ignorance but I still don't understand...
Let me explain. For intstance I have a file of photos in my iPhoto albums - I then hightlighted all of those pics and clicked the FaceBook icon and 'that album' then got uploaded to my Facebook photos.. this then shows up on my iPhotos as having TWO lots of that album stored. If I wanted to put the album on disk and then remove it from my album list in iPhoto's BUT the FB album would still be there - would it mean that that the FB album would also be removed. I can't really explain it properly here but I hope you know what I mean.
Next question... I have thought about an external drive - a friend has suggested that BUT I don't really understand how they work, would I have to have it connected to my laptop all the time OR just when I wanted to view/sort/upload my photos and this goes for my Itunes files too... I have a lot of songs stored there also!!
I wish I knew more about computers and MAC lol -
Problem with Photo Upload Dropbox Plugin
Dear ladies under gentlemen, I Photo Upload Dropbox Plugin acquired me about you and do not cloud membership. Also, always get an error message that another application is a conflict and it is stored in the product "Other". How should I proceed now that I can activate it? Thanks for your help in advance. I´ve a pc with windows7. With best regards Tobias Ritter
I have the same problem. Did not even get the DROPBOX plugin file and landed here at your Problem - not sure what os wrong with ADOBE - too complicated to get a plugin file downloaded. I never had any issues downloading PLUGIN's from 3rd parties. Why is a PLUGIN from ADOBE directly not working??????
I don' t want to subscribe to some stupid cloud service.
Hope this goes to ADOBE -
Hi I am using a ftp class (known as FTPConnection) that i found on this site: http://www.nsftools.com/tips/JavaFtp.htm , and they only have an example of how to download a File through FTP and not upload one. I am in the proccess of making an FTP upload applet, and need some help on getting upload to work. I also need it to work on both a Pc and mac, so that may be attributing to the problem becuase i am currently on a mac which uses file:// instead of C:\\. Ill post the ftp class, and a snippet of my code that tries to upload a selected file.
FTPConnection
/* <!-- in case someone opens this in a browser... --> <pre> */
* File: FTPConnection.java
* Author: Bret Taylor <[email protected]>
* URL: http://www.stanford.edu/~bstaylor/cs/ftpconnection/FTPConnection.java.shtml
* see also <a href="http://www.nsftools.com/tips/JavaFtp.htm">http://www.nsftools.com/tips/JavaFtp.htm</a>
* $Id$
* Parts of this code were adopted from a variety of other FTP classes the
* author has encountered that he was not completely satisfied with. If you
* think more thanks are due to any particular author than is given, please
* let him know. With that caveat, this class can be freely distributed and
* modified as long as Bret Taylor is given credit in the source code comments.
* Modified by Julian Robichaux -- http://www.nsftools.com
* Added constructors, logout(), listFiles(), listSubdirectories(), getAndParseDirList(),
* processFileListCommand(), and overloaded getFullServerReply().
* Also added StringBuffer parameter options to transferData() and executeDataCommand()
* and did a few other little things.
import java.io.*;
import java.net.*;
import java.util.*;
* <p>A wrapper for the network and command protocols needed for the most common
* FTP commands. Standard usage looks something like this:</p>
* <pre> FTPConnection connection = new FTPConnection();
* try {
* if (connection.connect(host)) {
* if (connection.login(username, password)) {
* connection.downloadFile(serverFileName);
* connection.uploadFile(localFileName);
* connection.disconnect();
* } catch (UnknownHostException e) {
* // handle unknown host
* } catch (IOException e) {
* // handle I/O exception
* }</pre>
* <p>Most FTP commands are wrapped by easy-to-use methods, but in case clients
* need more flexibility, you can execute commands directly using the methods
* <a href="#executeCommand(java.lang.String)">executeCommand</a> and
* <a href="#executeDataCommand(java.lang.String,
* java.io.OutputStream)">executeDataCommand</a>,
* the latter of which is used for commands that require an open data port.</p>
* @author Bret Taylor
* @author Julian Robichaux
* @version 1.01
public class FTPConnection extends Object {
* If this flag is on, we print out debugging information to stdout during
* execution. Useful for debugging the FTP class and seeing the server's
* responses directly.
private static boolean PRINT_DEBUG_INFO = false;
* The socket through which we are connected to the FTP server.
private Socket connectionSocket = null;
private String username;
private String password;
private String host;
* The socket output stream.
private PrintStream outputStream = null;
* The socket input stream.
private BufferedReader inputStream = null;
* The offset at which we resume a file transfer.
private long restartPoint = 0L;
* Added by Julian: If this flag is on, we're currently logged in to something.
private boolean loggedIn = false;
* Added by Julian: This is the line terminator to use for multi-line responses.
public String lineTerm = "\n";
* Added by Julian: This is the size of the data blocks we use for transferring
* files.
private static int BLOCK_SIZE = 4096;
* Added by Julian: After you create an FTPConnection object, you will call the
* connect() and login() methods to access your server. Please don't forget to
* logout() and disconnect() when you're done (it's only polite...).
public FTPConnection ()
// default constructor (obviously) -- this is just good to have...
* Added by Julian: Allows you to specify if you want to send debug output to
* the console (true if you do, false if you don't).
public FTPConnection (boolean debugOut)
PRINT_DEBUG_INFO = debugOut;
public FTPConnection (String user, String pw, String host_)
username=user;
password=pw;
host=host_;
PRINT_DEBUG_INFO = false;
* Prints debugging information to stdout if the private flag
* <code>PRINT_DEBUG_INFO</code> is turned on.
private void debugPrint(String message) {
if (PRINT_DEBUG_INFO) System.err.println(message);
* Connects to the given FTP host on port f, the default FTP port.
public boolean connect(String host)
throws UnknownHostException, IOException
return connect(host, 21);
* Connects to the given FTP host on the given port.
public boolean connect(String host, int port)
throws UnknownHostException, IOException
connectionSocket = new Socket(host, port);
connectionSocket.setSoTimeout(10000);
outputStream = new PrintStream(connectionSocket.getOutputStream());
inputStream = new BufferedReader(new
InputStreamReader(connectionSocket.getInputStream()));
if (!isPositiveCompleteResponse(getServerReply())){
disconnect();
return false;
return true;
* Disconnects from the host to which we are currently connected.
static boolean URLexists(String URLName)
try
HttpURLConnection.setFollowRedirects(false);
// note : you may also need
// HttpURLConnection.setInstanceFollowRedirects(false)
HttpURLConnection con =
(HttpURLConnection) new URL(URLName).openConnection();
con.setRequestMethod("HEAD");
return (con.getResponseCode() == HttpURLConnection.HTTP_OK);
catch (Exception e)
e.printStackTrace();
return false;
public String getSimpleFileName(File f)
String path=f.getPath();
String fileName=path.replace("\\", "/");
int slashPos = fileName.lastIndexOf("/");
fileName=fileName.substring(slashPos+1);
return fileName;
public String verifyFileName(String name)
int count=0;
//String url="http://chris-malcolm.com/images/"+URLEncoder.encode(name).replace("+", "%20");
while (URLexists("http://chris-malcolm.com/images/"+URLEncoder.encode(name).replace("+", "%20"))==true)
count++;
name=FileExt(name)[0]+"-"+count+"."+FileExt(name)[1];
return name;
public String[] FileExt(String fileName)
int dotPos = fileName.lastIndexOf(".");
fileName=fileName.replace("\\", "/");
int slashPos = fileName.lastIndexOf("/");
String extension, name;
if (slashPos==fileName.length()-1)
fileName=fileName.substring(0, fileName.length()-1);
slashPos=fileName.lastIndexOf("/");
extension="/";
name=fileName.substring(slashPos+1);
else if(dotPos==-1)
name=fileName.substring(slashPos+1);
extension="";
else
extension = fileName.substring(dotPos+1);
name=fileName.substring(slashPos+1, dotPos);
String[] output={name, extension};
return output;
String[] output={name, extension};
return output;
public void disconnect()
if (outputStream != null) {
try {
if (loggedIn) { logout(); };
outputStream.close();
inputStream.close();
connectionSocket.close();
} catch (IOException e) {}
outputStream = null;
inputStream = null;
connectionSocket = null;
* Wrapper for the commands <code>user [username]</code> and <code>pass
* [password]</code>.
public boolean login(String username, String password)
throws IOException
int response = executeCommand("user " + username);
if (!isPositiveIntermediateResponse(response)) return false;
response = executeCommand("pass " + password);
loggedIn = isPositiveCompleteResponse(response);
return loggedIn;
* Added by Julian: Logout before you disconnect (this is good form).
public boolean logout()
throws IOException
int response = executeCommand("quit");
loggedIn = !isPositiveCompleteResponse(response);
return !loggedIn;
* Wrapper for the command <code>cwd [directory]</code>.
public boolean changeDirectory(String directory)
throws IOException
int response = executeCommand("cwd " + directory);
return isPositiveCompleteResponse(response);
* Wrapper for the commands <code>rnfr [oldName]</code> and <code>rnto
* [newName]</code>.
public boolean renameFile(String oldName, String newName)
throws IOException
int response = executeCommand("rnfr " + oldName);
if (!isPositiveIntermediateResponse(response)) return false;
response = executeCommand("rnto " + newName);
return isPositiveCompleteResponse(response);
* Wrapper for the command <code>mkd [directory]</code>.
public boolean makeDirectory(String directory)
throws IOException
int response = executeCommand("mkd " + directory);
return isPositiveCompleteResponse(response);
* Wrapper for the command <code>rmd [directory]</code>.
public boolean removeDirectory(String directory)
throws IOException
int response = executeCommand("rmd " + directory);
return isPositiveCompleteResponse(response);
* Wrapper for the command <code>cdup</code>.
public boolean parentDirectory()
throws IOException
int response = executeCommand("cdup");
return isPositiveCompleteResponse(response);
* Wrapper for the command <code>dele [fileName]</code>.
public boolean deleteFile(String fileName)
throws IOException
int response = executeCommand("dele " + fileName);
return isPositiveCompleteResponse(response);
* Wrapper for the command <code>pwd</code>.
public String getCurrentDirectory()
throws IOException
String response = getExecutionResponse("pwd");
StringTokenizer strtok = new StringTokenizer(response);
// Get rid of the first token, which is the return code
if (strtok.countTokens() < 2) return null;
strtok.nextToken();
String directoryName = strtok.nextToken();
// Most servers surround the directory name with quotation marks
int strlen = directoryName.length();
if (strlen == 0) return null;
if (directoryName.charAt(0) == '\"') {
directoryName = directoryName.substring(1);
strlen--;
if (directoryName.charAt(strlen - 1) == '\"')
return directoryName.substring(0, strlen - 1);
return directoryName;
* Wrapper for the command <code>syst</code>.
public String getSystemType()
throws IOException
return excludeCode(getExecutionResponse("syst"));
* Wrapper for the command <code>mdtm [fileName]</code>. If the file does
* not exist, we return -1;
public long getModificationTime(String fileName)
throws IOException
String response = excludeCode(getExecutionResponse("mdtm " + fileName));
try {
return Long.parseLong(response);
} catch (Exception e) {
return -1L;
* Wrapper for the command <code>size [fileName]</code>. If the file does
* not exist, we return -1;
public long getFileSize(String fileName)
throws IOException
String response = excludeCode(getExecutionResponse("size " + fileName));
try {
return Long.parseLong(response);
} catch (Exception e) {
return -1L;
* Wrapper for the command <code>retr [fileName]</code>.
public boolean downloadFile(String fileName)
throws IOException
return readDataToFile("retr " + fileName, fileName);
* Wrapper for the command <code>retr [serverPath]</code>. The local file
* path to which we will write is given by <code>localPath</code>.
public boolean downloadFile(String serverPath, String localPath)
throws IOException
return readDataToFile("retr " + serverPath, localPath);
* Wrapper for the command <code>stor [fileName]</code>.
public boolean uploadFile(String fileName)
throws IOException
return writeDataFromFile("stor " + fileName, fileName);
* Wrapper for the command <code>stor [localPath]</code>. The server file
* path to which we will write is given by <code>serverPath</code>.
public boolean uploadFile(String serverPath, String localPath)
throws IOException
return writeDataFromFile("stor " + serverPath, localPath);
* Set the restart point for the next download or upload operation. This
* lets clients resume interrupted uploads or downloads.
public void setRestartPoint(int point)
restartPoint = point;
debugPrint("Restart noted");
* Gets server reply code from the control port after an ftp command has
* been executed. It knows the last line of the response because it begins
* with a 3 digit number and a space, (a dash instead of a space would be a
* continuation).
private int getServerReply()
throws IOException
return Integer.parseInt(getFullServerReply().substring(0, 3));
* Gets server reply string from the control port after an ftp command has
* been executed. This consists only of the last line of the response,
* and only the part after the response code.
private String getFullServerReply()
throws IOException
String reply;
do {
reply = inputStream.readLine();
debugPrint(reply);
} while(!(Character.isDigit(reply.charAt(0)) &&
Character.isDigit(reply.charAt(1)) &&
Character.isDigit(reply.charAt(2)) &&
reply.charAt(3) == ' '));
return reply;
* Added by Julian: Returns the last line of the server reply, but also
* returns the full multi-line reply in a StringBuffer parameter.
private String getFullServerReply(StringBuffer fullReply)
throws IOException
String reply;
fullReply.setLength(0);
do {
reply = inputStream.readLine();
debugPrint(reply);
fullReply.append(reply + lineTerm);
} while(!(Character.isDigit(reply.charAt(0)) &&
Character.isDigit(reply.charAt(1)) &&
Character.isDigit(reply.charAt(2)) &&
reply.charAt(3) == ' '));
// remove any trailing line terminators from the fullReply
if (fullReply.length() > 0)
fullReply.setLength(fullReply.length() - lineTerm.length());
return reply;
* Added by Julian: Gets a list of files in the current directory.
public String listFiles()
throws IOException
return listFiles("");
* Added by Julian: Gets a list of files in either the current
* directory, or one specified as a parameter. The 'params' parameter
* can be either a directory name, a file mask, or both (such as
* '/DirName/*.txt').
public String listFiles(String params)
throws IOException
StringBuffer files = new StringBuffer();
StringBuffer dirs = new StringBuffer();
if (!getAndParseDirList(params, files, dirs))
debugPrint("Error getting file list");
return files.toString();
* Added by Julian: Gets a list of subdirectories in the current directory.
public String listSubdirectories()
throws IOException
return listSubdirectories("");
* Added by Julian: Gets a list of subdirectories in either the current
* directory, or one specified as a parameter. The 'params' parameter
* can be either a directory name, a name mask, or both (such as
* '/DirName/Sub*').
public String listSubdirectories(String params)
throws IOException
StringBuffer files = new StringBuffer();
StringBuffer dirs = new StringBuffer();
if (!getAndParseDirList(params, files, dirs))
debugPrint("Error getting dir list");
return dirs.toString();
* Added by Julian: Sends and gets the results of a file list command,
* like LIST or NLST.
private String processFileListCommand(String command)
throws IOException
StringBuffer reply = new StringBuffer();
String replyString;
// file listings require you to issue a PORT command,
// like a file transfer
boolean success = executeDataCommand(command, reply);
if (!success)
return "";
replyString = reply.toString();
// strip the trailing line terminator from the reply
if (reply.length() > 0)
return replyString.substring(0, reply.length() - 1);
} else {
return replyString;
* Added by Julian: Gets a directory list from the server and parses
* the elements into a list of files and a list of subdirectories.
private boolean getAndParseDirList(String params, StringBuffer files, StringBuffer dirs)
throws IOException
// reset the return variables (we're using StringBuffers instead of
// Strings because you can't change a String value and pass it back
// to the calling routine -- changing a String creates a new object)
files.setLength(0);
dirs.setLength(0);
// get the NLST and the LIST -- don't worry if the commands
// don't work, because we'll just end up sending nothing back
// if that's the case
String shortList = processFileListCommand("nlst " + params);
String longList = processFileListCommand("list " + params);
// tokenize the lists we got, using a newline as a separator
StringTokenizer sList = new StringTokenizer(shortList, "\n");
StringTokenizer lList = new StringTokenizer(longList, "\n");
// other variables we'll need
String sString;
String lString;
// assume that both lists have the same number of elements
while ((sList.hasMoreTokens()) && (lList.hasMoreTokens())) {
sString = sList.nextToken();
lString = lList.nextToken();
if (lString.length() > 0)
if (lString.startsWith("d"))
dirs.append(sString.trim() + lineTerm);
debugPrint("Dir: " + sString);
} else if (lString.startsWith("-")) {
files.append(sString.trim() + lineTerm);
debugPrint("File: " + sString);
} else {
// actually, symbolic links will start with an "l"
// (lowercase L), but we're not going to mess with
// those
debugPrint("Unknown: " + lString);
// strip off any trailing line terminators and return the values
if (files.length() > 0) { files.setLength(files.length() - lineTerm.length()); }
if (dirs.length() > 0) { dirs.setLength(dirs.length() - lineTerm.length()); }
return true;
* Executes the given FTP command on our current connection, returning the
* three digit response code from the server. This method only works for
* commands that do not require an additional data port.
public int executeCommand(String command)
throws IOException
outputStream.println(command);
return getServerReply();
* Executes the given FTP command on our current connection, returning the
* last line of the server's response. Useful for commands that return
* one line of information.
public String getExecutionResponse(String command)
throws IOException
outputStream.println(command);
return getFullServerReply();
* Executes the given ftpd command on the server and writes the results
* returned on the data port to the file with the given name, returning true
* if the server indicates that the operation was successful.
public boolean readDataToFile(String command, String fileName)
throws IOException
// Open the local file
RandomAccessFile outfile = new RandomAccessFile(fileName, "rw");
// Do restart if desired
if (restartPoint != 0) {
debugPrint("Seeking to " + restartPoint);
outfile.seek(restartPoint);
// Convert the RandomAccessFile to an OutputStream
FileOutputStream fileStream = new FileOutputStream(outfile.getFD());
boolean success = executeDataCommand(command, fileStream);
outfile.close();
return success;
* Executes the given ftpd command on the server and writes the contents
* of the given file to the server on an opened data port, returning true
* if the server indicates that the operation was successful.
public boolean writeDataFromFile(String command, String fileName)
throws IOException
// Open the local file
RandomAccessFile infile = new RandomAccessFile(fileName, "r");
// Do restart if desired
if (restartPoint != 0) {
debugPrint("Seeking to " + restartPoint);
infile.seek(restartPoint);
// Convert the RandomAccessFile to an InputStream
FileInputStream fileStream = new FileInputStream(infile.getFD());
boolean success = executeDataCommand(command, fileStream);
infile.close();
return success;
* Executes the given ftpd command on the server and writes the results
* returned on the data port to the given OutputStream, returning true
* if the server indicates that the operation was successful.
public boolean executeDataCommand(String command, OutputStream out)
throws IOException
// Open a data socket on this computer
ServerSocket serverSocket = new ServerSocket(0);
if (!setupDataPort(command, serverSocket)) return false;
Socket clientSocket = serverSocket.accept();
// Transfer the data
InputStream in = clientSocket.getInputStream();
transferData(in, out);
// Clean up the data structures
in.close();
clientSocket.close();
serverSocket.close();
return isPositiveCompleteResponse(getServerReply());
* Executes the given ftpd command on the server and writes the contents
* of the given InputStream to the server on an opened data port, returning
* true if the server indicates that the operation was successful.
public boolean executeDataCommand(String command, InputStream in)
throws IOException
// Open a data socket on this computer
ServerSocket serverSocket = new ServerSocket(0);
if (!setupDataPort(command, serverSocket)) return false;
Socket clientSocket = serverSocket.accept();
// Transfer the data
OutputStream out = clientSocket.getOutputStream();
transferData(in, out);
// Clean up the data structures
out.close();
clientSocket.close();
serverSocket.close();
return isPositiveCompleteResponse(getServerReply());
* Added by Julian: Executes the given ftpd command on the server
* and writes the results returned on the data port to the given
* StringBuffer, returning true if the server indicates that the
* operation was successful.
public boolean executeDataCommand(String command, StringBuffer sb)
throws IOException
// Open a data socket on this computer
ServerSocket serverSocket = new ServerSocket(0);
if (!setupDataPort(command, serverSocket)) return false;
Socket clientSocket = serverSocket.accept();
// Transfer the data
InputStream in = clientSocket.getInputStream();
transferData(in, sb);
// Clean up the data structures
in.close();
clientSocket.close();
serverSocket.close();
return isPositiveCompleteResponse(getServerReply());
* Transfers the data from the given input stream to the given output
* stream until we reach the end of the stream.
private void transferData(InputStream in, OutputStream out)
throws IOException
byte b[] = new byte[BLOCK_SIZE];
int amount;
// Read the data into the file
while ((amount = in.read(b)) > 0) {
out.write(b, 0, amount);
* Added by Julian: Transfers the data from the given input stream
* to the given StringBuffer until we reach the end of the stream.
private void transferData(InputStream in, StringBuffer sb)
throws IOException
byte b[] = new byte[BLOCK_SIZE];
int amount;
// Read the data into the StringBuffer
while ((amount = in.read(b)) > 0) {
sb.append(new String(b, 0, amount));
* Executes the given ftpd command on the server and writes the results
* returned on the data port to the given FilterOutputStream, returning true
* if the server indicates that the operation was successful.
private boolean setupDataPort(String command, ServerSocket serverSocket)
throws IOException
// Send our local data port to the server
if (!openPort(serverSocket)) return false;
// Set binary type transfer
outputStream.println("type i");
if (!isPositiveCompleteResponse(getServerReply())) {
debugPrint("Could not set transfer type");
return false;
// If we have a restart point, send that information
if (restartPoint != 0) {
outputStream.println("rest " + restartPoint);
restartPoint = 0;
// TODO: Interpret server response here
getServerReply();
// Send the command
outputStream.println(command);
return isPositivePreliminaryResponse(getServerReply());
* Get IP address and port number from serverSocket and send them via the
* <code>port</code> command to the ftp server, returning true if we get a
* valid response from the server, returning true if the server indicates
* that the operation was successful.
private boolean openPort(ServerSocket serverSocket)
throws IOException
int localport = serverSocket.getLocalPort();
// get local ip address
InetAddress inetaddress = serverSocket.getInetAddress();
InetAddress localip;
try {
localip = inetaddress.getLocalHost();
} catch(UnknownHostException e) {
debugPrint("Can't get local host");
return false;
// get ip address in high byte order
byte[] addrbytes = localip.getAddress();
// tell server what port we are listening on
short addrshorts[] = new short[4];
// problem: bytes greater than 127 are printed as negative numbers
for(int i = 0; i <= 3; i++) {
addrshorts[i] = addrbytes;
if (addrshorts[i] < 0)
addrshorts[i] += 256;
outputStream.println("port " + addrshorts[0] + "," + addrshorts[1] +
"," + addrshorts[2] + "," + addrshorts[3] + "," +
((localport & 0xff00) >> 8) + "," +
(localport & 0x00ff));
return isPositiveCompleteResponse(getServerReply());
* True if the given response code is in the 100-199 range.
private boolean isPositivePreliminaryResponse(int response)
return (response >= 100 && response < 200);
* True if the given response code is in the 300-399 range.
private boolean isPositiveIntermediateResponse(int response)
return (response >= 300 && response < 400);
* True if the given response code is in the 200-299 range.
private boolean isPositiveCompleteResponse(int response)
return (response >= 200 && response < 300);
* True if the given response code is in the 400-499 range.
private boolean isTransientNegativeResponse(int response)
return (response >= 400 && response < 500);
* True if the given response code is in the 500-5ok i tried explaining th eproblem in the previous post, but i apologize if my explanation was poor. anyways, i tried to look into it further by doing a printStackTrace() and believe it may be a read error. here is my new updated snippet, and also a link to a screenshot ([click here for screenshot|http://img143.imageshack.us/my.php?image=picture4qr0.png]) of what the error looks like on my end. it seems like a socket is not being read, or maybe it is initialized properly. Again I apologize if my problem is vague, but I do appreciate your input. thanks.
updated code snippet
public void uploadFiles()
statusLabel.setVisible(true);
errorLabel.setVisible(true);
uploadButton.setVisible(false);
footer.setVisible(false);
holdingPanel.setVisible(false);
pbar.setVisible(true);
pbar = new JProgressBar();
pbar.setMinimum(0);
float Total=0;
for (int i=0; i<fileLengths.size(); i++)
if(((java.lang.Boolean)model.getValueAt(i,1)).toString().equals("true"))
Total+=Float.parseFloat((String)fileLengths.get(i));
pbar.setMaximum((int)Total);
String info="";
try
ftp=new FTPConnection(false);
ftp.connect("ftp.chris-malcolm.com");
if (ftp.login("chrismal", "***"))
statusLabel.setText("Status: Connected.");
info+="Successfully logged in!\n";
info+="System type is: " + ftp.getSystemType()+"\n";
info+="Current directory is: " + ftp.getCurrentDirectory()+"\n";
if (ftp.changeDirectory("/www/images/"))
info+="directory changed to: " + ftp.getCurrentDirectory()+"\n";
try
for (int i=0; i<allFiles.size(); i++)
if(((java.lang.Boolean)model.getValueAt(i,1)).toString().equals("true"))
String f=client.verifyFileName((String)model.getValueAt(i,0));
String f2=""+((File)allFiles.get(i)).getPath();
info+="filename: "+f2+"\n";
if (ftp.uploadFile(f2))
statusLabel.setText("Status: Uploading "+f+" - "+i+" of "+calculateTotalFiles()+" files(s)");
pbar.setValue(Integer.parseInt((String)fileLengths.get(i)));
else
errorLabel.setText("Error occured while uploading"+f2+"\n");
catch(Exception de)
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
de.printStackTrace(pw);
pw.close();
//errorLabel.setText("<html>ERROR:"+sw.toString().replace("\n", "<br>")+"</html>");
info+="Error: "+de.getMessage()+"\n";
info+="Trace: "+sw+"\n";
try { ftp.disconnect(); statusLabel.setText("Status: disconnected.");} catch(Exception e2) {};
else
info+="could not change directory\n";
else
info+="could not login";
catch (Exception e)
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter(sw);
e.printStackTrace(pw);
pw.close();
info+="Error: "+e.getMessage()+"\n";
info+="Trace: "+sw+"\n";
try { ftp.disconnect(); statusLabel.setText("Status: disconnected.");} catch(Exception e2) {};
errorLabel.setText("ERROR:"+info);
JOptionPane.showMessageDialog(this, info, "test", JOptionPane.PLAIN_MESSAGE);
try { ftp.disconnect(); statusLabel.setText("Status: disconnected.");} catch(Exception e2) {};
Edited by: cjm771 on Jul 13, 2008 7:23 PM -
I found this cool photo gallery tutorial
http://www.kirupa.com/developer/mx2004/xml_flash_photogallery.htm
but I'm having problem to put it together onto my flash web. I wold
like to make portfolio and I want to have several categories. Each
category will have its own photo gallery with animated buttons
loading in each gallery separately onto same area. something
similar to this
http://www.flashmint.com/show-template-1920.html
but where its loading text onto animated banners I want to load my
photo gallery. Any ideas how to put it together? I'm beginner with
action script . I use flash 8 proffesionalrest of the code here:
<div id="previews">
<div id="controls">
<ul id="transport">
<li><a href="#" class="previousBtn" title="Previous">Previous</a></li>
<li><a href="#" class="playBtn" title="Play/Pause" id="playLabel"><span class="playLabel">Play</span><span class="pauseLabel">Pause</span></a></li>
<li><a href="#" class="nextBtn" title="Next">Next</a></li>
</ul>
</div>
<div id="thumbnails" spry:region="dsPhotos" class="SpryHiddenRegion">
<div class="thumbnail" spry:repeat="dsPhotos"><a href="{path}"><img alt="" src="{thumbpath}"/></a><br /></div>
<p class="ClearAll"></p>
</div>
</div>
<div id="picture">
<div id="mainImageOutline"><img id="mainImage" alt="main image" src=""/><br /> Caption: {pcaption}</div>
</div>
<p class="clear"></p>
</div>
Any help with getting the caption to display would be greatly appreciated. The Caption {pcaption} does not work, -
Help with Photo Gallery using XML file
I am creating a photo gallery using Spry. I used the Photo Gallery Demo (Photo Gallery Version 2) on the labs.adobe.com website. I was successful in creating my site, and having the layout I want. However I would like to display a caption with each photo that is in the large view.
As this example uses XML, I updated my file to look like this:
<photos id="images">
<photo path="aff2010_01.jpg" width="263" height="350" thumbpath="aff2010_01.jpg" thumbwidth="56"
thumbheight="75" pcaption="CaptionHere01"></photo>
<photo path="aff2010_02.jpg" width="350" height="263" thumbpath="aff2010_02.jpg" thumbwidth="75"
thumbheight="56" pcaption="CaptionHere02"></photo>
<photo path="aff2010_03.jpg" width="350" height="263" thumbpath="aff2010_03.jpg" thumbwidth="75"
thumbheight="56" pcaption="CaptionHere03"></photo>
</photos>
The images when read into the main file (index.asp) show the images in the thumbnail area and display the correct image in the picture pain. Since I added the pcaption field to the XML file, how do I get it to display? The code in my index.html file looks like this:rest of the code here:
<div id="previews">
<div id="controls">
<ul id="transport">
<li><a href="#" class="previousBtn" title="Previous">Previous</a></li>
<li><a href="#" class="playBtn" title="Play/Pause" id="playLabel"><span class="playLabel">Play</span><span class="pauseLabel">Pause</span></a></li>
<li><a href="#" class="nextBtn" title="Next">Next</a></li>
</ul>
</div>
<div id="thumbnails" spry:region="dsPhotos" class="SpryHiddenRegion">
<div class="thumbnail" spry:repeat="dsPhotos"><a href="{path}"><img alt="" src="{thumbpath}"/></a><br /></div>
<p class="ClearAll"></p>
</div>
</div>
<div id="picture">
<div id="mainImageOutline"><img id="mainImage" alt="main image" src=""/><br /> Caption: {pcaption}</div>
</div>
<p class="clear"></p>
</div>
Any help with getting the caption to display would be greatly appreciated. The Caption {pcaption} does not work, -
Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx
The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.
-
I am having issues with Photo Stream and iPhoto when the iPhoto library is stored on a Drobo NAS. When I access the library stored on the NAS I see Photo Stream on the menu and when I access the library I get a message that tells me I need to switch Photo Stream to this Library. I did select to switch Photo Stream over to this NAS library and I did get a big blue button that is suppose to start Photo Stream but when I push it nothing happens.
I have contacted Apple support and they said that this is the way Photo Stream works and recommended that I submit a request to have this feature added at Apple\Feedback, if it is something I would like to have. They said if enough people request this feature they will add it but that Photo Stream does not currently support an iPhoto library stored on a remote NAS or shared network drive.
My question is has anyone found a work around for this? If you would like to have this feature added to Photo Stream can you please submit your request to Apple so they will add it, perhaps a little sooner than later?I checked today and this issue has been solved with the latest iPhoto update from Apple. I am running iPhoto 9.2.3 on my Snow Leopard Server which is sharing a Drobo NAS. I am also running iPhoto 9.2.3 on my MBP running Lion and I can now open my iPhoto Library and Photostream will work with the library and even automatically create events and move all my Photostream pictures into these events within the Library. I can then close the Library on my MBP and open the same Library from my Snow Leopard server and the new Events are there and I can move them around with no problem. Thank you Apple for this fix. Even though I cannot deal with Photostream directly from the Snow Leopard server this is a very eligant work around.
-
IS there a way that I can turn off the flash that happens when i take pictures with photo booth?
I was also wondering if the camera records video?
Thank you!Hello Sarah CMac
To disable Photo Booth flash, hold shift while you click.
BTW, holding option disables the seconds countdown. You can use both at once if desired.
Photo Booth 2 that comes with Leopard adds video recording with "effects" and sound. If you do not want to upgrade to Leopard, you can use WebcamTweaker for "effects" videos or any of the apps that can record video or movie clips from this list of Some Applications You Can Use With iSight for video without Photo Booth's "effects."
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight -
TS3989 help with photo stream not making it to pc folder.. uploads a no no also..???
the photos from My I phone photo stream,do not appear in the folder i assigned it to be in. Also when i put photos in my upload folder, they do not make it to my photo stream on m y iphone ??? ive tried everything with the help ??
No, I certainly am not saying it's a feature; just a widely discussed issue that as far as I know has no current solution. I was only sharing this so you were aware that you weren't alone in having this problem, and that it may not be solvable at the current time. If you search the forums perhaps you'll find a solution I'm not aware of.
-
I just imported a bunch of photos, and they all have alphanumeric titles straight from the camera (For example, DSCN0789.JPG). I decided to change all the titles to somewhat describe the photo. I did this in the information pane.
All the titles are changed with no problem in iPhoto, but when I go to my iPhoto library in the finder, all the photos still have the DSCNxxxx.JPG title. Aren't the titles supposed to update in the finder/iPhoto library folder when you make a change in the iPhoto application?
Also, when I changed the title, I deleted .JPG. Is that ok?
Thanks for the help!!xixi
But why are you rooting through the iPhoto Library Folder trying to figure out the numbers when there are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
In the case of uploading, I suggest the File -> Export option. This allows you to use the title as a filename, and also to make other choices - including resize the pics. iPhoto produces a copy to the desktop, and then upload that. Afterwards, trash the copy on the desktop.
No double work, easy peasy.
Regards
TD -
Need help with image upload and preview display
hi guys,
I'm trying to upload image and then display it as a preview, but when upload form submits to the same page image placeholder does not refreshes it's source and displays the same image as before.
Image 4.jpg already exists.
I upload it with nameConflict = "overwrite"
upload form points to the same page, therefore page reloads
In IE image placeholder does not display the new image, but shows the old one until I refresh the page with F5 and resend information, however if checked, image in the file is already different.
In Firefox, sometimes it works and image refreshes, sometimes not.
any help would be greatly appreciated!
cheers,
SimonHi Daverms,
With your code you suggest to not only upload the image but make a database entry too. However my intention is to firstly upload the file, and show a preview. Then if user is satisfied with what he sees, he presses "aprove" button and therefore makes a datase entry. Then the photo number will increase by one.
Until user is not aproving the photo he can upload any image again and again, but the new image will be always given the same name (example 4.jpg) and overwriting the old one.
I believe the problem persists because browsers are loading image with the same name from the cache, and not from the actual location. Therefore when I refresh the page it catches the correct image.
If I follow your code, every time I upload the image, name of it is different, therefore browser cannot find it in the cache and is forced to load one from the server.
I wonder is there any way to avoid this cache problem?
cheers,
Simon -
Help with photos in project???!!
Hello,
I just bought an iMac about a month ago so that I could edit home movies and create DVD's of family vacations/events to share with my family. I have done this in the past on the PC with Pinnacle Movie Studio Software but it was buggy and more of a pain than it was worth.
So far pretty impressed with the iMac and FCE seems like it has potential. However I keep having problems with still photos in my video.
Here is what I have done - created a new project using the NTSC 48k template (not at my desktop now so I'm working off memory as far as naming). I captured all of my Sony Mini DV footage to the PC and dropped it into my timeline and edited it. Went smoothly. At the end of my movie I want to insert a "recap of the trip" using the still photos that I took with my digital camera and use the ken burns effect and transitions with music playing. My plan is to render and burn to DVD with iDVD for playback on a 1080p 60 inch plasma.
My photos are jpegs saved on my hard drive. I cropped them and adjusted color, etc in CS2. I didn't do anything as far as re-sizing them etc in photo shop as this is a little new to me and I didn't want to mess them up. Do I need to resize them for FCE? Seems like the program does this? If I need to resize them what size should I make them? Remember I want to be able to zoom in by creating the burns effect.
I have taken the photos and imported them into FCE. I drop them on the timeline and push play and everything looks great. When I start adding transitions with and applying the ken burns effect with key points the image plays fine by itself in the viewer window. However, when I watch the project play back in the canvas the stills appear very jumpy - not like a frame is missing in the render - the still literally looks like it jumps up and then settles back down. This is driving me nuts! FCE has to be able to do this smoothly. Can anyone provide me with a simple step by step on what settings I should be using for my sequences, etc to make this work. The settings really mess me up and I must be missing something.
I do have Tom's book but I can't find anything to help me with this issue. It is driving me nuts. Thank you in adavnce!Thank you for the link. I went there and read the information. I still have questions:
Assuming I am using just still photos (let's keep it easy at first and assume no video) - what settings do I use for FCE under easy set up and for the sequence? Photos are jpg images shot with a digital camera that have been saved on my computer for a few years. I want to output my contents to DVD using iDVD and play back on a 1080p plasma tv.
Do I have to edit or resize the photos in photoshop first? It sounds like I can just import them into FCE and that it should work. I am not working with advanced photoshop images - just simple jpg images - no layers. The chart on page 2 of the link above says for 1080i - rectangular size N/A and square size 1920x1080. What does this mean? Is this telling me to resize my images to 1920x1080 before I import into FCE? If I want to use the Ken Burns effect and zoom should I double this to 3840x2160?
If someone can tell me step by step what they would do with the settings for FCE if they wanted to create a still photo slideshow with music, transitions and pan and zoom I would appreciate it. Again - source material is jpg images and I want to output to DVD using iDVD to display on a 1080p plasma tv. Also assuming that you had a standard landscape photo shot with a 4 megapixel camera what steps would you go through to prep it for FCE in Photoshop - if any?
Sorry that I am asking for a detailed example but I learn much better that way - after I am able to get one photo into an acceptable format for FCE the rest will be easy.
Has anyone actually created a successful slide show in FCE using transitions and the Ken Burns effect or do they get jitters in their photos as well - the image doesn't appear to flow smoothly. -
Help with File Upload manually
Hi Experts,
I need code to upload a file without using the upload UI Element. we have our terms and conditions which has to be signed by the user and once the user signs and clicks the next button to go to the next page, I generate a pdf with the time stamp of when the user signed and upload it to ECC. here i can not use the File upload UI Element but have to upload it automatically to ECC.
Can any one help me out with this please.
ThanksHi,
I dont know why you need to to upload the file for this requirement. You can simply store the user id and the timestamp in portal database table or in a ECC z table.
In case you definitely need to upload the file then you can use KM API to uploadthe file to portal KM folder
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
but you need not use the upload feature in the example, instead just get the data from wd context and upload to KM.
Srini -
Hi,
I still have not received an answer so I attached a docutment if that helps. I am suppose to draw the diagram in paths and not each shape on a different layer. My issue is that I can't fill the path with black for some reason. am doing an assignment for school. I'm suppose to create a image using the Pen tool and Shape Layer tool using the Working Path. I am suppose to save one selection from the paths and fill in image with a black hue fill. I have tried saving the working path and tried to fill with black. I did a practice by drawing only a portion of the image. I saved it as a working path and selected fill and I get the promp to fill. Then I hit okay and nothing happens to the image filling in with black. I'm doing something wrong and am fusterated. Any ideas. Your help is appreciated.
Carolyn
[email protected]upload your image using the camera icon and please don't make threads upon threads about the same thing
Maybe you are looking for
-
Lack of BT products since 20th Jan 2014 first day ...
I ordered BT infinity2 (because I was told I could get infinity 2 speed) the first issue I found out that I can only get infinity 1. Along with the infinity I ordered the Phone line and TV on the 20th of Jan 2014, it is now the 31 Mar 2014 they have
-
Plug-in to save no longer works in Reader 9.1
We have a plug-in for Adobe that calls a save utility and saves it in a specific location using that utility program. However, Adobe Reader 9.1 causes this utility not to function (it appears not to be able to read a path entry in the Windows registr
-
Hi I am trying to finish a program that analyzes data and in the main method of my program I need a command that allows me to prompt the user of the program for a file to read into the program so that the program can run its analysis. What would such
-
I also cant force it to hyphenate. when I highlight the next and "check" hyphenation nothing happens. Please help! Thank you! Mac // CS6
-
hello, when i want to open my Adobe Photoshop CC, it will imeddiatly close again. I can not use or work in the progamm, or open photos in it. Does anybody knows what is the problem of this?