Help with preloader

i have a created a simple preloader w/ a simple progress bar
for my main swf. i'm using flash 8 and have attached the action
script code that i used for it. when i test it online, as the the
progress bar loads midway, the contents of my main swf also starts.
my understanding is that the once the preloader reaches 100%, that
is when the main swf starts. the second problem is once the main
swf loads completely, everything works (buttons, links) except the
popup menu that i have. when i rollover one of my buttons that
reveal a popup menu w/ buttons, none of the buttons work. i click
them and nothing happens. what am i doing wrong? does the fact that
my main swf has 116 frames and my preloader swf has only 100 have
anything to do with it?
i would totally appreciate some help as i am fairly new to
flash, especially action script. thank you :)

The only job that the preload functions control is the
display of your
progress bar. The loadClip() function starts the loading of
the new
clip. Your listener pays attention to the progress of the
loading, and
fires the appropriate functions to control the progress bar's
display.
When you load in the new clip, it will do whatever you told
it to do.
The work of myListener is completely superfluous. You could
remove all
of the myListener functions and the new clip will load
exactly the same way.
You'll need to look at the movieClip that you're loading in
to see where
the problems might be.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412.243.9119

Similar Messages

Need help with preloader for photo gallery

Hello!
I know I might be the 99999999991 to say that but I will say
it...I'm a begginer with flash and I have a problem...:-)
I'm building a photo gallery which loads jpg photos inside a
loader component by using MovieClipLoader.
Everything works just great but my only problem is that I
can't scale the content (the jpg's) to the size of the loader
component.
I tryed everything but the photos are loading bigger then the
loader, and I wnat to have the photos bigger then the loader so
that I could have good quality on any resolution. Here's the
actionscript I used, if it's necessary:
//------------------MovieClip Loader---------\\
var mcLoader:MovieClipLoader = new MovieClipLoader ();
var myListener:Object = new Object ();
mcLoader.addListener(myListener)
myListener.onLoadProgress = function
(target_mc,bytesLoaded,bytesTotal) {
extLoader_mc._visible = true;
var pctLoaded = Math.round(bytesLoaded/bytesTotal*100);
extLoader_mc.extLoaderBar_mc._xscale = pctLoaded;
extLoader_mc.extLoadinBarLines_mc._xscale = pctLoaded-1;
extLoader_mc.pct_txt.text = pctLoaded;
if (bytesLoaded >= bytesTotal) {
extLoader_mc._visible = false;
mcLoader.loadClip("pics/zernike1.jpg",picViewer_mc.picLoader);
T
Text
Text

first of all, you can't directly resize the bitmaps, you have to resize the movieclip above it. so if needed, create an empty movieclip inside another wrapper movie clip and resize the wrapper.
then i noticed you don't have onLoadInit in your listener
this method:
myLIstener.onLoadInit=function(mc:MovieClip){
will execute commands after the content is loaded. so you will have to resize your content after it's been loaded. you can't just resize something that you loaded above in your code, you have to wait until it's fully loaded
anyways since you siad you are beginner i will list some useful tip for this job (i don't know if you already know them):
this -refers to current movie clip
this._parent -refers to parent movie cilp
width and height of movie clips are controlled by _width and _height properties, not width height

Help with Preloaded nano

My father received a nano as a present, loaded with songs. He receieved a new mac also, but has the following questions.
1. Supposedly the nano is registered to someone else (the giver). How can he reregister this?
2. Can he get the music on the nano onto the mac so that if he needs to erase the nano, he won't lose the music?
Thanks, Jim

I recently had the same problem, my computer had to be rebooted so essentially i had a new computer with the same problem as you. Dont worry about plugging into the computer it wont automatically update without asking you. you have a few options
1. Apple allows you to transfer itunes from one itunes to another only if the songs are from c.d's or bought from the itunes store. To do this, go to the website and search for "itunes transfer to new computer" or something. However if the music was gotten another way (downloaded illegally or elsewhere), do steps 2 or 3.
2. If the songs on the ipod came from c.ds, just load up the music from the c.d's on to your new, different itunes. After that is done, plug the ipod into the computer and all the music should be the same on both the computer and ipod. Then it will say something like , "your ipod is registered to another itunes, do you want itunes to update your ipod to this itunes?" Say yes and then you can re-register it. All the music will still be there.
3. Just put all the music from the other itunes onto c.d's by burning it, then do step 2.
4. There is no way to just put the songs from the ipod on a new itunes, these are the only options i came up with. With me, I allowed my ipod to be wiped out, and will replace the music with my cds and then download the rest.

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

Need help with coding for HTML5 Video with Flash fallback

Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 video with Flash fallback. Not sure if the coding is correct. Do I need anything else Javascipt etc?

The reason you see a blank page is because it's trying to load the file that is pretty humungous and there is no preloader. So, you see a white screen till it complets loading.
Also, the reason why its loading a SWF file and not any of HTML5 type video is because your doctype declaration is XHTML1.0 and not HTML5.
Change the 1st line in your .html file from:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
to:
<!DOCTYPE html>
Then see if your HTML5 video types load with <video> tag.

Registering event handler with preloader

As you can see from the code below, I have an application
with a custom preloader designated in the Application tag.
I would like the preloader to be able to receive a message
from my main application but in order to that I need to register a
method in the preloader as an event handler for an event fired by
my application and in order to do that I have to have a reference
to both the preloader and the application.
Where can I get a reference to both? this.preloader seems to
be null when the initialize() event is fired in my application and
mx.core.Application.application is null in my preloader. Is there
any way at all to do this?
I would GREATLY appreciate any help with this! I've been
struggling with this for hours :(
Thanks!
Moshe

Thank you Nayan..
BR
Aliye

Help with double buffer

I have a series of images that I display on a jLabel using imageIcon that get loaded depending on the mouse position on the label. I would like to preload these images somehow so that there is no wait time for the user when these images are called up. It seems that the doublebuffer object might help with this but I am not sure how....Any help appreciated..
Jacques

Well you can create an array of Image Icons and put you images there ...
ImageIcon[] myImages = new ImageIcon[number_Of_Images]; -MaxxDmg
- ' He who never sleeps...'

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Creation of context sensitive help with pure FM 12 usage doesn't work

Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000    1
#define 2022    2
#define 2030    3
#define 2180    4
#define 2354    5
#define 2560    6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
Mohi

Hi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help with preloader

Similar Messages

Maybe you are looking for