Help with publishing straight to FTP

Using 3.0.4 on Snow Leopard
I am trying to upload a site to a root folder of an FTP since it's the main site. When I publish straight to FTP it creates separate folder and that extra folder shows up on the address bar. I want to eliminate that extra folder while still being able to publish straight to FTP. Wondering if anyone could shed some light on that.
I have to two other sites being hosted on the same FTP. I created that second folder for them that I'm ok with, but I am not able to point the main site to its own folder, so that is why I'm trying to set it up on the root with iWeb. Thanks!

To do this you need to publish to a local folder...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and upload the folder contents to the root folder...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html

Similar Messages

Help with publishing website through ftp

hello,
for some odd reason, i have been having problems updating my website using the ftp server.
i am getting an error message now stating "incorrect password" when attempting to publish onto the ftp server. this has never happened before and i have not changed my password.
any help would be greatly appreciated,
grodr

To do this you need to publish to a local folder...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and upload the folder contents to the root folder...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html

Please help with any or all: FTP, HTML, .Mac unpub'ing

Dear Helpers,
I too, build my site with iWeb and published to Mac, only to discover that the site was not "built in HTML" so I could not get help with SEO later on. (Then I read a Varrkgirl entry that seems to say that indeed once published, the site does contain HTML code. I am a novice and I don't "see" the code on my published pages..what do I know?) I was told "rebuild your site in HTML", transfer to new host via FTP.
Sooo, I had someone look at the site, put in the HTML code, and then he gave it to me on a disk which I can load onto my computer. I have been told to publish to a new host, via FTP Cyberduck (I see there's a tutorial for that here too) and unpublish my .Mac one. Don't know what in what order to do this.
I need help prioritzing tasks please. and to know if there is an easier way perhaps or if this should/could be avoided. Ultimately, I want a site in HTML code on my published site so that I can get some SEO help with later on. When I published to a folder, I do see code but if I simply upload this to another host would that take care of the whole issue? (i.e. dump the disk my person worked on, etc.)
re: HTML (could I have done this myself with Text Edit? If so, then is there a way to do so at this point, since my site is published to .Mac presently?) If I want to build/change current pages in the future using iWeb I want to know how, and then how to move changes to a new host.
re: Unpublishing my site at .Mac (when? it would seem like before I use FTP but if for some reason FTP'ing does not work then I am without my site, right?)
re:my laundry (really out of hand since beginnng this process of totally ignoring one's life for the web..)
Sincere thanks

HTML:
iWeb pages certainly ARE html code. You just don't edit the code in iWeb. If you need to add some code afterwards, try this:
http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html
SEO:
http://www.varkgirl.com/Varkgirl/Google%20and%20iWeb.html
Basic iWeb FAQ:
http://www.varkgirl.com/iWebFAQ

Need help with publishing -- highlight boxes and recordings

I'm having a problem with publishing a presentation. I've recorded audio for PP slides and added highlight boxes. I've tested these in Edit mode - the recordings work fine and the highlight boxes appear correctly as per their settings. When I go to publish, some of the recordings and highlight boxes are not working on some of the slides (but work fine on other slides). Obviously I've missed some setting on these but I cannot figure out what and where. Could anyone please help??

Just kidding. Now, the files seem to be uploaded and in the right folder; however, now the page just isn't loading. See what I mean, everything going wrong?!

Help with publishing website remotely!

When I look at my website from dreamweaver preview in Google Chrome, it is exactly how I want it. Working links, etc. When I uploaded to the remote server...all columns were gone, layout, background, colors etc. Please help!!

Are your FTP credentials properly defined in DW's Site > Manage Sites panels?
Servers:
Root directory is the folder your hosting provider told you to use. On some servers the default root folder is public_html or www or htdocs (this varies by host). Some don't use any folder. If unsure which settings to use, contact your hosting provider.
Nancy O.

Help with iWeb 09 and ftp publishing please?

I'm using iWeb09 and when I publish my website via ftp, the address it publishes to is my web address, followed by / and the name I gave the website on iWeb. So its not showing on my actual website. When I go to visit the website via the successfully published screen, the message I get is the requested url is not found on this server. Any help please?

Make sure you entered the correct URL in the Publishing Settings page and that you have left the Directory/Path field blank as shown on the first example on this page...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
To remove the sitename from the URL...
http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Help with publishing website templates and creating a menu please?

Hello, I’m new to this website and flash so please bear with me.
I have purchased a website template from istockphoto (example… http://www.istockphoto.com/file_closeup.php?id=631369 ), which is easy to upload pictures on to, but i have a few questions...
I have now uploaded my images on to it, but please can you give me some advise on how to publish it on to the Internet? I have bought my own domain name but I don’t have a clue how to link it to this web template, and I can’t seem to find any specific information.
Also I want to create a menue with 8 different subject categories, each with a separate image gallery and I don’t know how to link them together and list them in a ‘home page’.
If you could give me some tips or a link to some information that would be fantastic!
Thankyou very much in advance! Any help would be very much appreciated as i have been searching for a few days now and i don't understand how it works.
Donna

First, after exporting your FLA to SWF, you have to embed it into an html page, then upload both html and swf to your host.

Need some help with publishing

Hey Everyone
Just helping out a friend with some design print work and having some trouble publishing in the right dimensions
When I set up the documents it had 2 pages at 105mm height and 148mm wide.
Now when saving as a pdf it tells me the dimensions are 201 by 297 and im struggling to understand how this could have changed so dramatically.
I feel like i must be missing an integral part of the process if I have gone this wrong.
It had 5 mm bleeds with registration marks checked in pdf settings when publishing and yet every program I open it in says its these new dimensions.
Please if anyone can help me with my query I would greatly appreciate it.
Cheers

Jim,
If you mean 210 by 297 mm, and if hat appears when you open the PDF, it is just a change from A5 to A4 (Landscape), which is the standard paper size (if not Letter) and therefore assumed. You should be able to choose (change back to) A5 and have things working.

Help with publishing calendars

Hi,
We are attempting to set up calendaring for our staff members. We are using an Xserve running OS 10.5.2, authenticating to an Open Directory Master running 10.5.2. Mail, both from a client and webmail work fine. A user can log into the group Wiki and web calendaring work just fine.
iCal 3.02 on a 10.5.2 client machine trying to publish a calendar to the server generates the following error:
Access to http://[email protected]/Home.ics is not permitted.
wwitch is the short name of a trial user.
We've made the following settings in Server Admin (v10.5):
-Click the server's name and under the Access tab, "For all services" is checked on the left and "Allow all users and groups" is checked on the right.
-iCal service, Data Store is set to a location on a 2nd disk drive on the Xserve called calendars. This folder has the same permissions set as the default location.
-iCal authentication is set to "Any Method" and is using port 8008. SSL is not enabled.
In Workgroup Manager, each user has the following settings under the Advanced Tab, Enable calendaring is checked and the server is set to mail1.egsd.org.
There is one group for these users. That group under the Basic tab has Mailing list, wiki and blog, Web Calendar, and Mailing list web archive all checked with the default web site of mail1.egsd.org selected.
Any ideas to enable the users to publish a calendar from iCal would be appreciated.

Hawg_rider,
Two quick points:
1) That name and path looks all wrong to me. I have only set-up calendars on a provisional/test basis but the paths look more like this:
http://serverfg.private:8008/principals/users/ldusseault
2) There is a whole group dedicated to iCal Server issues here: http://discussions.apple.com/forum.jspa?forumID=1234 and you're much more likely to find someone with the specific knowledge you want there.
Hope that helps,
=Tod

Help with publishing/email forwarding

Hi, I am very new to the web-building game. Here's my situation in a nutshell:
-Bought a domain (nightdrivemusic.com)
-Forwarded my emails through that domain to be received and sent through my gmail account.
So far so good, everything working fine....
-Created a very basic site w Muse.
-Published site, changed nameservers and connected businesscatalyst site with my domain address.
Domain connected successfully! And could be seen by visiting that domain address.
-However, now emails sent to the nightdrivemusic.com address are rejected and sent back instead of being forwarded to gmail, they are never received by my gmail account.
I've been reading and trying to solve this problem myself, but I cannot figure this one out. There are just too many variables that I do not understand.
Please let me know if there is any additional info you need to help me resolve this issue, or point me in the direction where I can solve it myself. Thank you!

I see that right now your domain is managed by ns03.domaincontrol.com. and ns04.domaincontrol.com., which are reporting these MXs:
10   aspmx.l.google.com       173.194.70.26 (no glue)
20   alt1.aspmx.l.google.com       173.194.71.26 (no glue)
30   alt2.aspmx.l.google.com       74.125.141.26 (no glue)
40   aspmx2.googlemail.com       173.194.71.26 (no glue)
50   aspmx3.googlemail.com       74.125.141.27 (no glue)
Check it here (Screen shot: http://project02.businesscatalyst.com/Jing/2013-02-05_1441.png)
If you want to keep using the Gmail's email service then to have your site up and running follow either one of these:
1. Point an A record from the registrar's control panel(where you have purchased the domain from) to this IP, 192.150.2.140, after which you will have to delete the domain from the BC's admin panel and re-add it using the External Service option, (Screen shot: http://project02.businesscatalyst.com/Jing/2013-02-05_1446.png)
2. Redelegate the domain to the BC's NS following the instructions here, http://www.adobekb.com/launching_pt02.html#redelegatingyourdomain, this may take upto 48 hours to propagate, after which you will have to delete the Mx records that you already have on the BC's admin panel (Screen shot: http://project02.businesscatalyst.com/Jing/2013-02-05_1450.png) and add the ones for gmail (Small Video: http://project02.businesscatalyst.com/Jing/2013-02-05_1451.swf)
Why it takes 48 hours to propagate?
Let me know if you need any other clarification.
- Abhishek Maurya

Need help with publishing as animated .gif

I'm having trouble publishing my project as an animated .gif. My project, which consists of two different animated movie clips, plays just fine when test it (Shift + Enter). But, when I go to publish it, the animations don't show up. The settings are exactly the same as with my other animated .gifs.
Any suggestions???
Thanks!

If you try to 'publish' as an app, and you use the words ebook or just book, the review teams are likely to reject and tell you to do a book instead, so be prepared to not call it any type of book and to deliver something that showcases the device and iOS as best as you can if you take that route...it's non-trivial, mostly, so be prepared to learn any skills you may not have yet need going in.
Look at the book 'Yellow Submarine' for what I consider a good example of a standard epub w/m'media. it can be done, but as noted, iBA is iPad only, so....good luck.

Help with publishing in muse

Ok so I've finished my site and ready to publish.
It seems muse does this strange thing sometimes.
I export the files, i publish it, exept when i look on my site online the text and photos are not there but when i go into the program, everything is there fine.
How come
I have tried deleting the photos and trying to re-insert the photos into text but don't know how to text wrap.

- file and export HTML
- open transmit FTP client and upload
Thing is, I don't know what to fix if it doesn't look broken.
I go on site online
www.rickfarrow.co.uk
If you click on News / events in the nav bar, you can see there is text in the news widget. Online there are no photos in these text boxes, however in muse they're still there.
2 The same applies to YouTube links, in the muse program, they are the YouTube links I complied across, yet when online, there are a couple of bids that when you click the vid, it plays a completely different clip.
3 I had to create separate text boxes for hyperlinks as when I tried to create text into a hyperlink it says about rasterization, I'm not sure how to correct this.

I need help with publishing a book I'm creating on my MBP...Anyone help?

Hi,
I,m in the middle of compiling data that I intend to create a book of some kind with. Mostly text, not too much in thew way of graphics or pictures, although I cant rule that out.
Right now, my raw text is in MS Word for the Mac, with no other page formatting than 1" borders all the way round. I figured I could just put the data there for now, as a place to store it, in native Word format.
I'm not at all opposed to using different software, or other techniques to do this project. I've never even tried doing something like this before, and I admit, my Word skills are not that great either.
This will be all new to me. I can't afford alot, but I can learn to do most of whatever work I can do, myself.
Any and all suggestions would be appreciated!!
Dave

djmaher wrote:
When I'm done doing that, I might want to self-publish, and print it, maybe just for me... Not sure yet.....
If you're just going to print it out for yourself, you could just use Word. If you want multiple copies printed, though, and want to use a self-publishing house, it's probably best to contact them. Some might take Word files, while others might want PDF files from a page-layout program.
In general, you'll be able to make your book look nicer if, once you're done, you use a page layout program like InDesign or Quark Xpress to take your Word files and lay out the pages. I think you could also use Pages, though I did see once place that had a complaint about the quality of the PDF files it creates. But again, this would depend on who you have actually print your book.
charlie

Need help with publishing for web

Hi,
I am a new user to Captivate but am trying to create an
online demo that will be accessible via a link on a website.
I have recorded the content and have added the animation.
I have published the file as an executable and also as a
flash (export to html). I have then opened the demo on a variety of
PC systems to see the quality of my project. I am discouraged
because in an executable and in a web browser my project is much
larger than what I created and on some slides I do not believe the
complete image is visible (on some systems). Is there any way to
control the size of the executable or html final project?
I am curious to what other have done to produce a high
quality end result demo. Any suggestions, or advice would be much
appreciated.
Thanks,
Alllison

Hi Allison and welcome to our community
What you have posted would seem to suggest you have created
.SWF output with the .HTM companion page (Export HTML).
Contrary to what you may believe, the Export HTML option
doesn't produce a pure HTML version of your movie. Instead, it
produces an additional HTML page intended to be used to cause your
movie to display at the size in which you recorded it.
So again, what you have posted would seem to indicate you are
linking directly to the raw .SWF and bypassing the HTML page. If
you do this, the .SWF simply opens at whatever size the browser is
configured for.
Or... possibly you recorded full screen. (not best practice
by any means) If you recorded at perhaps 1024x768, when your user
plays the movie back, they get scroll bars as the browser area is
reduced so it can display the "chrome" elements. Buttons and
whatnot. So best practice in this situation is to record at a
smaller size that will comfortably play back for your end users.
Not only from the physical size perspective, but the "weight" of
the bandwidth needed to pull the movie down. (The larger the
physical recorded size, the more bandwidth is required).
Cheers... Rick :)

Help with Publishing to a File - Photo Albums don't appear

I published to a file. I tested it and it looks good. I burned the folder to a CD in order to view it on another computer - specifically a PC. My webpages look right, but the photo albums don't appear. I can manually open the folders on the CD and verify that the photo jpg files are there. Any ideas? I am using iWeb 2.0.2.

Are you transferring the index.html file along with the website folder and double clicking the index file to launch the site in the PC browser?

Help with publishing straight to FTP

Similar Messages

Maybe you are looking for