Help with reboot error for solaris 10
Hi,
we have a sun sparc solaris 10 machine and recently there was a power failure and one of the server domain was down. So today morning i have powered up the domain and it returned me to ok prompt then i have booted the machine with disk from devalias, the system was up as normal and no error messages in message file. All the mount points we available as it was in vfstab. To be on safer side i have rebooted the machine and it never came back up and from xscf console i had a look and the system got repeating these messages as below
Feb 7 12:58:08 svc.startd[7]: svc:/system/sysevent:default: Method or service exit timed out. Killing contract 19.
Feb 7 12:58:08 svc.startd[7]: svc:/system/cryptosvc:default: Method or service exit timed out. Killing contract 22.
Feb 7 12:58:08 svc.startd[7]: svc:/system/coreadm:default: Method or service exit timed out. Killing contract 23.
Feb 7 12:58:08 svc.startd[7]: svc:/system/power:default: Method or service exit timed out. Killing contract 24.
.Then i have powered the whole domain down. Not able to understand what the issue was and any help will be great.
Thanks,
p
Hi,
The system doesnt load up to check the svcs -vx command when rebooted. I am able to bring server up when only i did a shutdown instead of reboot. when the system was up i had a look at the services which are timed out when rebooted and all the services were fine and in online state and no error in svcs -vx.
I believe it could be something of getting time out and thought of increasing the timeout for start and stop but any ways got my issue sorted by solaris itself.
seen similar cases in google so below link could be helpful
http://www.runningunix.com/2009/01/changing-timeouts-on-smf-services/
Thanks,
P
Edited by: 924016 on 08-Feb-2013 03:45
Similar Messages
-
Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."
Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.
Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.
-
Help with CreateDefaultDomain error
hello guy,
Please i need help with this errors
"*ERROR: An error occurred while building the default domain.*
*Please see this log file for more details:*
*C:\oracle\Middleware\jdeveloper\system\system11.1.1.0.31.52.05\o.j2ee.adrs\CreateDefaultDomain.log*"
This is the content of the log.
*"Default domain will be created:*
*C:\oracle\Middleware\jdeveloper\system\system11.1.1.0.31.52.05\DefaultDomain*
*C:\oracle\Middleware\wlserver_10.3\common\bin\wlst.cmd "C:\oracle\Middleware\jdeveloper\system\system11.1.1.0.31.52.05\o.j2ee.adrs\CreateDefaultDomain.py"*
*Process started*
*wlst > 'C:\WINDOWS\system32\QTJava.zip' is not recognized as an internal or external command,*
*wlst > operable program or batch file.*
*Elapsed time: 609 ms".*
this error is effecting the applications i built.
thank
kollyjust check your parameter... it means that the parameter on showInputDialog on the API dont match with the parameter with your showInputDialog code
-
Can somebody help me get rid of the following compile errors:
coreservlets/OrderPage.java:61: setNumOrdereed(int, int) in coreservlets.ShoppingCart
cannont be applied to (java.lang.String,int)
cart.setNumOrdered(recordingid, numItems);
.\coreservlets\shoppingCart.java:44 cannot resolve symbol
symbol : variable recordingid
location: class coreservlets.ShoppingCart
if (order.getrecordingid() == (recordingid)) {
.\coreservlets\ShoppingCart.java:49: cannot resolve symbol
symbol : variable recordingid
location: class coreservlets.ShoppingCart
itemOrder new order = new ItemOrder(Catalog.getItem(recordingid));I know that not very helpful with out the code but the code is very big so if anyone wants me to post extracts from the code please tell me.Thank you i put that code in but now get the following:
coreservlets/OrderPage.java:40: incompatible types
found : java.lang.strgin
required: int int recordingid = request.getParameter("recordingid")!=null?request.getParameter("recordingid"):1;
^/code]
coreservlets/OrderPage.java:48: addItem(java.lang.String) in coreservlets.ShoppingCart cannot be applied to (int)
cart.additem(recordingid);
.\coreservlets\AhoppingCart.java:44: cannot resolve symbol
symbol: variable recordingid
location: class coreservlets.ShoppingCart
if (order.getrecordingid() == (recordingid)) {
.\coreservlets\AhoppingCart.java:49: cannot resolve symbol
symbol: variable recordingid
location: class coreservlets.ShoppingCart
ItemOrder newOrder = new ItemOrder(Catalog.getItem(recordingid));
4 errors.
Also could you explain what the line you added to the code means:
!=null?request.getParameter("recordingid"):1;
!=null?request.getParameter("numItems"):"1";and how come you got rid of if (recordingid != null) {Thanks for any help with these errors
OK I HAVE GOT RID OF ALL THE ERRORS APART FROM THE TOP ONE:
code]coreservlets/OrderPage.java:40: incompatible types
found : java.lang.strgin
required: int
int recordingid = request.getParameter("recordingid")!=null?request.getParameter("recordingid"):1;
/code]
Message was edited by:
ajrobson -
Help with the error message that ADE is not allowed to copy a book onto my Nook. I have tried authorizing and unauthorizing many times--at wits end with this issue.
I too am having the same problem. I have a new hard drive that was imaged from the old one and I'm trying to side load a book to my Nook Simple Touch.. I first installed ADE 4 then borrowed and downloaded a book from Overdrive. I tried a few times to delete and reauthorize both the computer and the Nook and each time I get an authorization error when I try to side load the book. I then found on the Nook forum that the Simple Touch and ADE 4 don't get along. So I uninstalled ADE 4 and installed ADE 3.
I then followed this recommended procedure found on the forum: I deleted the Digital Editions folder from my Nook, launched ADE 3 and authorized the computer, then connected the Nook. For a few seconds, hovering the mouse over the setting icon for the Nook displayed everything on the context menu grayed out. But then it showed the context menu and I was able to display the Nook's authorization, which was the same as the computer's. Still get the same error side loading the book. Deleting and reauthorizing doesn't help. And the Digital Editions folder is still missing from the Nook. -
Need a little help with some errors.
Receiving some errors..
btn2.addActionListener(new ActionListener() {
and also
frame.setLocation(400,400);
frame.setVisible(true);
}<<~~has 2 errors here...
Both above have class or interface expected errors..clueless on what i'm missing at the moment.
Anyone mind pointing out what {'s and }'s i'm missing?
btn1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
btn1actions();
private void btn1actions() {
if (radio1.isSelected()) System.out.println("Radio Button 1 is selected.");
if (radio2.isSelected()) System.out.println("Radio Button 2 is selected.");
btn2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
btn2actions();
private void btn2actions() {
if (radio1.isSelected()) System.out.println("Radio Button 1 is selected.");
if (radio2.isSelected()) System.out.println("Radio Button 2 is selected.");
btn3.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
btn1actions();
private void btn3actions() {
txt1.setText("");
txt1.requestFocus();
public static void main(String[] args) {
Test2 frame = new Test2();
frame.setTitle("Test Frame");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(400, 300);
frame.setLocation(400,400);
frame.setVisible(true);
}All my code..finally posted...just need help with more errors.
F:\DocumentsTest2.java:169: ';' expected
btn1.addActionListener(new ActionListener()) {
^
F:\Documents\Test2.java:176: illegal start of expression
private void btn1actions() {
^
F:\Documents\Test2.java:191: illegal start of expression
private void btn2actions() {
^
F:\Documents\.java:202: illegal start of expression
private void btn3actions() {
^
4 errors
Tool completed with exit code 1
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test2 extends JFrame{
static JButton btn1,btn2,btn3;
static JTextField txt1;
static JRadioButton radio1,radio2;
public Test2() {
Container container = getContentPane();
container.setLayout(new BorderLayout());
//Create Panels
JPanel Panel1 = new JPanel();
JPanel Panel2 = new JPanel();
JPanel Panel3 = new JPanel();
JPanel Panel4 = new JPanel();
JPanel Panel5 = new JPanel();
JPanel Panel6 = new JPanel();
JPanel Panel7 = new JPanel();
JPanel Panel8 = new JPanel();
JPanel Panel9 = new JPanel();
JPanel Panel10 = new JPanel();
//Set Layout for Panels
Panel3.setLayout(new BorderLayout());
Panel4.setLayout(new BorderLayout());
Panel5.setLayout(new BorderLayout());
Panel6.setLayout(new BorderLayout());
Panel10.setLayout(new BorderLayout());
//Create the Various Fonts and Colors for this GUI
Font font1 = new Font("SansSerif", Font.BOLD, 20);
Font font2 = new Font("Serif", Font.PLAIN, 15);
Color color1 = new Color(3,15,125);//A Dark Blue Color
Color color2 = new Color(201,29,10);//A Red Color
Color color3 = new Color(127,127,127);//A Grey Color
//Create Buttons and Labels
btn1 = new JButton("Submit");
btn2 = new JButton("Display Schedule");
btn3 = new JButton("Enter New Name");
JLabel label1 = new JLabel("Student Name");
JLabel label2 = new JLabel("Course Number");
JLabel label3 = new JLabel("Welcome to the Java Community College");
JLabel label4 = new JLabel("Registration System!");
//Declare Text Field For Entering Student Names
txt1 = new JTextField(15);
//"Put Course Number from another Method Here"
String[] courseStrings = { "CISM2230 A", "CISM2230 B", "CISM1110 A", "CISM1110 B", "CISM1120 A", "CISM1120 B" };
JComboBox Combo1 = new JComboBox(courseStrings);
//Declare Radio Buttons for Add and Drop Course
radio1 = new JRadioButton("Add a Course", false);
radio2 = new JRadioButton("Drop a Course", false);
ButtonGroup radioButtons = new ButtonGroup();
radioButtons.add(radio1);
radioButtons.add(radio2);
//Panel 10 is the Main Displaying Panel
Panel10.add(Panel3, BorderLayout.NORTH);
Panel10.add(Panel4, BorderLayout.CENTER);
Panel10.add(Panel8, BorderLayout.SOUTH);
//Panel 3 Used to Display Label 3 and 4 using Panels 1 and 2
Panel3.add(Panel1, BorderLayout.NORTH);
Panel3.add(Panel2, BorderLayout.CENTER);
Panel1.add(label3);
Panel2.add(label4);
//Panel 4 Used to Display Student Name, Txt1, Course Number, Combo Box and Radio Buttons
Panel5.add(label1, BorderLayout.NORTH);
Panel5.add(txt1, BorderLayout.CENTER);
Panel6.add(label2, BorderLayout.NORTH);
Panel6.add(Combo1, BorderLayout.CENTER);
Panel7.add(radio1, BorderLayout.NORTH);
Panel7.add(radio2, BorderLayout.CENTER);
Panel4.add(Panel5, BorderLayout.NORTH);
Panel4.add(Panel6, BorderLayout.CENTER);
Panel4.add(Panel7, BorderLayout.SOUTH);
//Panel 8 Used to Display the Buttons
Panel9.add(btn1, BorderLayout.CENTER);
Panel9.add(btn2, BorderLayout.CENTER);
Panel9.add(btn3, BorderLayout.SOUTH);
Panel8.add(Panel9, BorderLayout.CENTER);
//Setting Background, ForeGround and Font of all Text.
Panel1.setBackground(color3);
Panel2.setBackground(color3);
Panel3.setBackground(color3);
Panel4.setBackground(color3);
Panel5.setBackground(color3);
Panel6.setBackground(color3);
Panel7.setBackground(color3);
Panel8.setBackground(color3);
Panel9.setBackground(color3);
Panel10.setBackground(color3);
btn1.setBackground(color3);
btn2.setBackground(color3);
btn3.setBackground(color3);
radio1.setBackground(color3);
radio2.setBackground(color3);
btn1.setFont(font2);
btn2.setFont(font2);
btn3.setFont(font2);
Combo1.setFont(font2);
Combo1.setBackground(color3);
Combo1.setForeground(color1);
label1.setFont(font2);
label2.setFont(font2);
label3.setFont(font1);
label4.setFont(font1);
label1.setForeground(color2);
label2.setForeground(color2);
label3.setForeground(color1);
label4.setForeground(color1);
container.add(Panel10);
//Setting Keyboard Shortcuts to Radio Buttons and Regular Buttons
btn1.setMnemonic('S');
btn2.setMnemonic('D');
btn3.setMnemonic('E');
radio1.setMnemonic('A');
radio2.setMnemonic('C');
//ActionListener
btn1.addActionListener(new ActionListener()) {
public void actionPerformed(ActionEvent evt) {
btn1actions();
private void btn1actions() {
if (radio1.isSelected()){ System.out.println("Radio Button 1 is selected. Button 1")};
if (radio2.isSelected()){ System.out.println("Radio Button 2 is selected. Button 1")};
btn2.addActionListener(new ActionListener()) {
public void actionPerformed(ActionEvent evt) {
btn2actions();
private void btn2actions() {
if (radio1.isSelected()) System.out.println("Radio Button 1 is selected(Button 2).");
if (radio2.isSelected()) System.out.println("Radio Button 2 is selected.Button 2");
btn3.addActionListener(new ActionListener()) {
public void actionPerformed(ActionEvent evt) {
btn1actions();
private void btn3actions() {
txt1.setText("");
txt1.requestFocus();
public static void main(String[] args) {
JavaCollegeTest2 frame = new JavaCollegeTest2();
frame.setTitle("Project 4");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setSize(400, 300);
frame.setLocation(400,400);
frame.setVisible(true);
} -
I still need help with the Dictionary for my Nokia...
I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW. -
OpenSSH 4.4p1 packages with PAM support for Solaris 9, 10
As mentioned in a previous post* , I've compiled OpenSSH packages with PAM support for Solaris 9 and 10. They've since been updated to version 4.4p1, and are compiled against a static zlib (1.2.3) and OpenSSL (0.9.8c). You can find them here:
http://firewallworks.com/downloads/unsupported/Solaris-sparc/
Regards,
Greg
* http://forum.sun.com/jive/thread.jspa?threadID=103378&tstart=105Yes, zlib 1.2.3 is a requirement. In facts, zlib mentions a 2005 vulnerability fix but I found no matching patch in sunsolve. See
http://www.kb.cert.org/vuls/id/JGEI-6E7RC3
I have been wandering whether to replace the official zlib. Linking statically is probably a better idea. Thanks -
HELP HELP HELP with adminstrator password for pavilion dv7 beats audio
Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.
Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP. -
Can anyone help with this error? ;At line 102 of file"C:/Program files (x86)/Macromedia/Dreamweaver
Can anyone help with this error please?;At line 102 of file"C:/Program files (x86)/Macromedia/Dreamweaver 8/Configuration/Objects/Common/Images.js"; TypeError: cmdDOM.parentWindow.setFormItem is not a function
If Dreamweaver shows a message saying "the following JavaScript error(s) occurred", it's usually a sign of a corrupt cache file. The first thing you should always be to delete the file cache. If that doesn't work, delete your personal Configuration folder. Please go through the steps mentioned in thread Deleting a corrupted cache file.
-
Please help with compiling error
Hello, I am currently taking a class in Java Programming and need help with an error. I am working on a Mortgage Calculator and when I compile the code I get this error. I have no idea how to fix this. Can anyone help? Thank you.
'{' expected public class MortgageCalculator
1 error
Tool completed with exit code 1
Here is my code
import java.io.*;//*java input output
import java.util.Date;//Date Utility
import java.util.Formatter;//format Utility
import java.text.NumberFormat;//*format numbers
//class MortgageCalculator
public class MortgageCalculator
public static void main(String[]args);{
Date currentDate=newDate();
DecimalFormat decimalPlaces=newDecimalFormat("0.00");
//declare Variables
final double principalBalance=200000;//*$200,000 Loan
final double monthlyInterest=.06;//*6% interest rate
final double Term=12*30;//*monthly interest rate
final double monthlyInterest=((principalBalance*(monthlyInterest/12))/(1-Math.pow(1+(monthlyInterest/12))-(Term)));
//Display Output
System.out.println("\t\t" + currentDate);
System.out.println("\t\tLoan Amount" + principalBalance);
System.out.println("\t\tInterest Rate" + monthlyInterest);
System.out.println("\t\tTerm of Loan" + Term);
System.out.println("\t\tThe Payment will be:" + monthlyInterest);
System.out.println(decimalPlaces.format(mothlyInterest));
}You need to enclose your class body in { }. You're missing at least one of them
-
Help with Simple Applescript for Midipipe
Hey all, I'm in desperate need of help with some Applescript for use in a program called Midipipe:
http://web.mac.com/nicowald/SubtleSoft/MidiPipe.html
I simply require an Applescript for Midipipe that filters out all OFF notes except for the most recently pressed key, or most recently pressed ON note. So for example, when multiple keys have been pressed, only the most recently pressed key will send an OFF note. I hope that is clear enough, i've had some major issues trying to get this work and my last hope is to hit the forums and find some help .. I've posted on some of the audio forums and i'm hoping someone here knows how to code this.
Thanks so much!! .. Its for an upcomming show next week so i'm hoping someone can get me in the right direction to solving this.
-JesI try to help, but you'll need to apply your brain cells to get it working with what I've already explained (three times with what I offer below). Try something like the following (I am renaming your buttons to ch1,ch2,ch3,ch4,ch5,ch6 so that the same functions can be shared by all buttons...
// this assigns listeners to all 6 buttons
for(var i:uint=1; i<7; i++){
this["ch"+String(i)].addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
// this processes any one of the 6 btns when they are clicked
function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
var btn = event.currentTarget;
var cuePointInstance:Object = vid.findCuePoint(btn.name);
vid.seek(cuePointInstance.time);
resetButtons(); // this makes all buttons go back to normal
btn.upState = btn.overState; // this makes the clicked button change states
function resetButtons():void {
for(var i:uint=1; i<7; i++){
this["ch"+String(i)].upState = this["ch"+String(i)].hitTestState;
For this to work, your buttons need to have the same artwork in the hit frame as they do in the up frame. -
Please help with RMAN dup for RAC db
Happy Holidays!! All,
I need help with the following issue:
Both target and auxiliary databases are:
Database version is 10.2.0.3 with 2-node RAC db
Servers are MS 2003
Oracle Clusterware 10.2.0.3
Oracle ASM for storage
I have run the rman dup from RAC to a single instance db for a while. This is the first time I ran from RAC to RAC. This auxiliary db was refreshed before and was up for a while and was managed by server control tool. Now I am trying to refresh it with new backup files from production. I did the following as people suggested:
1) shutdown instance in the second node.
2) Startup nomount mode in the first node
3) Run RMAN dup
It failed in the same place with slightly different errors. I pasted error messages at the bottom. I already created a TAR with Oracle but would like to know if anybody has any info related to this. Also I have several questions to ask:
1) Should I stop all services related to Oracle in node-2
2) Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
3) Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
4) How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Thanks a lot for your help and have a great holiday season!!!
First time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ====================================================
RMAN-00569: ======= ERROR MESSAGE STACK FOLLOWS ==============
RMAN-00571: =============================================
RMAN-03002: failure of Duplicate Db command at 12/21/2009 20:24:47
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-00610: Internal error code
Second time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ==========
RMAN-00571: ===================================================
RMAN-03002: failure of Duplicate Db command at 12/22/2009 15:53:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-03113: end-of-file on communication channel
Shirley1) Should I stop all services related to Oracle in node-2
No, you just need to stop the second instance.
2) Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
No, you don't need to stop anything. Just have the instance startup nomount.
3) Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
You have not shown enough information. Did the restore succeed ? Did the recover succeed ? What was it doing when it failed ?
4) How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Yes, srvctl remove database is all you need. (unless you also want to remove from listener.ora, tnsnames.ora, oratab etc) -
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name. -
Help with Download error in Creative Cloud Student and Teacher Edition
I have been paying for the Creative Cloud Student and teacher editions of the Adobe suite. I have two laptops. The cloud application installed fine in both, but I could not download the apps into my preferred machine, receiving a "Download Error" for my pains. The other laptop, with its small memory size, was not suitable for the programs and has recently crashed and passed on! So now I'm still left with half of my year's commitment to go and have still not been able to benefit from the programs. i have tried every which way to get them on my main computer, taking advice from the net but to no avail. This is all I get:
Hi Deian,
Are you on a managed network. Please refer the knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
Regards,
Romit Sinha
Maybe you are looking for
-
Connecting and backing up external HDD to a Time Capsule
Hi All, Running a Macbook pro Retina. I would like to do the following things with a Time Capsule: Physically connect an external HDD to the time capsule, put media on this external HDD and access it wirelessly on my macbook Use the time capsule to b
-
I have already verified that we have not exceeded the two allowed activations, yet it seems that the Activation server won't connect. Is there a work around for this?
-
http://www.ronancuanflynn.com Hi im trying to get my menu to stretch across the logo. I have done this using the following method but it only works in Safari from what i can tell. <div id="menu"> <ul> <li><a href="#">Menu item 1</a></li> <l
-
Different download locations for podcasts/videos?
I primarily use a MBP, so I have to think about limited HD space. Does anyone know of a way to set iTunes to download podcasts to an external drive, without having to change my iTunes library location? It seems like it would be a really good idea for
-
How to run exe file using oracles procedure (ASAP) ?
i am finding difficulties in running an exe file using an oracle procedure.I need this for a pure .NET application