Help with regsvr /i flash10c.ocx on Win7 x64

I'm trying to register the Flash ActiveX control on a 64 bit install of Windows 7. In an elevated command prompt I tried regsvr /i flash10c.ocx but get the error message "The module flash10c.ocx was loaded but the call to DllRegisterServer failed with error code 0x80004005." I had to pull the ocx from a 32 bit machine (C:\Windows\System32\Macromed\Flash location) because I couldn't find it on the 64 bit install. What's the proper way to register the ActiveX control?
If this is not possible I've also read about ways to use ActiveX controls without first registering them. Would that work?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

Help with install photoshop cs4 extended in win7 64bit !

im using windows 7 ultimate 64bit, i tried to install photoshop cs4 extended but when it's done with error. So any idea about this issue ?

I'm not a mod but I have the Links.
CS4 Clean Script.

Having a problem with Excessive "modified" memory usage in Win7 x64, upwards of 3.6GB, any suggestions?

I have 6GB of ram, a fresh install of Windows 7 x64, and the screenshot shows what happens after leaving my PC on for a couple days. (3782+MB being used by modified memory ATM).
http://wow.deconstruct.me/images/ExcessiveMemory.jpg
Any ideas on this?
Edit:
Added this after first round of suggestions
http://wow.deconstruct.me/images/NotSoExcessiveMemory.jpg
This is uptime of around 2 hours.
The first image is of uptime of around 3-5 days.

Matthew,
The only reason why these pages are kept on the modified list indefinitely is because the system doesn't have any available pagefile space left. If you increase the size of the pagefile the system will write most of these pages to disk and then move them from the modified list to the standby list. Standby pages are considered part of "available memory", because they can be reused for some other purpose if necessary.
Whether this would "fix" the problem or not depends on what the actual problem is. If it's an unbound memory leak then increasing the size of the pagefile will simply allow the system to run longer before it eventually hits the maximum pagefile size limit, or runs out of disk space. On the other hand, if it's a case of some application allocating a lot of memory and not using it for a long time, then increasing the pagefile might be a perfectly valid solution.
Allowing the system to manage the size of the pagefile actually works well in most cases. Pagefile fragmentation (at the filesystem level) can only occur when the initially chosen size is not large enough and the system has to extend it at run time. For win7 we have telemetry data that shows that even for systems with 1 GB of RAM, less than 0.1% of all boot sessions end up having to extend the pagefile, and this number is even lower for larger amounts of RAM. If you think you are in that 0.1% and your pagefile might be getting fragmented, you can manually increase its minimum size such that the total system commit charge stays below 80% even if you run all your apps at once (80% is the threshold at which the pagefile is automatically extended). This will make sure the pagefile is created once and then stays at the same size forever, so it can't fragment. The maximum size can either be set to the same value as the minimum, or you can make it larger so that the system is more resilient to memory leaks or unexpectedly high loads.
By the way, Windows doesn't use pagefiles as "extra memory", it uses them as a backing store for private pages, just like regular files are used as a backing store for EXEs/DLLs and memory mapped files. So if the system really has more than enough RAM (like in your second screenshot, where you have 3.6 GB of free pages) you shouldn't see any reads from the pagefile. You can verify this by going to the Disk tab in the resource monitor and looking for any disk IO from pagefile.sys. On smaller systems that don't have an excess of free pages you may see periodic reads from the pagefile, and this is expected because the total amount of data referenced by the OS/drivers/processes is larger than the total RAM. Forcefully keeping all pagefile-backed pages in memory (which is what disabling the pagefile does) would simply mean some other pages (memory mapped files, DLL code or data etc) would have to be paged out.
Regarding further troubleshooting steps: If the system runs fine with a larger pagefile (commit charge stabilizes well below 80%, and you no longer see gigabytes of modified pages accumulating in memory) then you don't really need to do anything. If the problem persists, you can check for any processes with an abnormally high commit charge, and also check kernel memory usage in task manager. If it's a kernel leak you can usually narrow it down to a particular driver using poolmon.exe or kernel debugger.

Need help with System.setClipboard error

SDK version: 3.3.0.4589
Requires flash 10.0.12 or higher
Code:
private function sendTextToClipboard():void
System.setClipboard("User Name: " + uname + "\n" + "Password: " + pword);
I am using the System.setClipboard function in my application and have incountered an interesting problem.
When the call is made on a windows box (XP and Vista) IE crashes.
The following is the Vista IE error that is being thrown:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.6001.18865
Application Timestamp: 4b077416
Fault Module Name: Flash10c.ocx
Fault Module Version: 10.0.32.18
Fault Module Timestamp: 4a613d79
Exception Code: c0000005
Exception Offset: 0016f1f2
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
The following is the XP SP3 IE error:
Internet Explorer has encountered a problem with an add-on and needs to close.
The following add-on was running when this problem occured:
File: FlDbg10b.ocx
iexplore.exe - Application Error
The instruction "0x052bee0e" referenced memory at "0x00000018". The memory could not be read.
Any help would be greatly apprieciated.

Try the example in the docs and see if that works.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

Msi 990fxa-gd65 setting up raid 1 with os win7 x64 on ssd

Ok, I just built my first computer and am trying to set up win7 x64 on my 120g SSD while running two 2 TB wd hard drives in raid 1. I have tried everything and am at wits end! please help
i set up raid in the bios, then set up a LD with the two 2 TB hard drives however when I go to install win7 it says its missing a driver and wont proceed.

If the SSD is connected to a SATA-3 port you may need drivers to make Windows know about it.
Same for the RAID, but that one can be loaded after Windows is installed.

Flash10c.ocx is giving errors and is nowhere to be found.

I keep getting an error "Component 'Flash8b.ocx' or one of its dependencies not correctly registered: a file is missing or invalid". When it says "Flash8b.ocx" I am guessing it means there is a problem with Flash10c.ocx.
I decided that I was going to reinstall flash to try and solve the problem. I completely wiped out all traces of flash (or so I thought) using Revo and CCleaner and I also went through the registry myself to see if there was anything left behind. Then I installed a brand new version of flash and I got the same error. I went to windows\system32\macromed\flash\ and I couldn't find flash10c.ocx anywhere or any .ocx file for that matter. Then I did a search and I couldn't find it either.
Did the name of the file change in this newer version or something? I want to register or fix whichever .ocx file is responsible for the error I recieved but I don't know where it is.... Could someone please give me a hand? Thanks.

Do not manually "uninstall" Flash Player by deleting files and registry entries, but uninstall it correctly by using the uninstaller from http://www.adobe.com/go/tn_14157. If you just delete OCX files without unregistering them, you may expect probles later on.
In order to get Flash10c.ocx installed, you need to run the online installer on Internet Explorer, or the offline ActiveX installer http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe

Please help with RAID driver update.

I need a little help with updating my RAID drivers. I have P55-GD65 motherboard and some SATA2 hard drives connected in RAID arrays. I am running Win7 64bit.
I already downloaded and installed:
“Intel P55 AHCI / RAID Drivers Ver: 8.9.0.1023”
from the MSI support web page. The setup file installed the “Matrix Storage Manager” and the “Matrix Storage Console”
On the same web page I see another download link:
“Intel Matrix Storage Manager Driver Ver: 9.5.0.1037”
It looks like I already installed the manager with the previous driver. Do I need to install this one too? What is the difference between both?
Also when I open the “Intel Matrix Storage Manager Driver Ver: 9.5.0.1037” I see 2 executable files:
“iata_cd.exe” and “iata_enu.exe”
I read the “Readme.txt” provided, but I couldn't find information on what is the difference between the EXE files and which one I should use.

Quote
I read the “Readme.txt” provided, but I couldn't find information on what is the difference between the EXE files and which one I should use.
Use either one. It doesn't matter in a functional way.

Interlacing in capture from miniDV now occurs with upgrade to Win7 x64

Hi there...
this is my first attempt to post a question on the forum, so thankyou in advance for any help or advice.
I used to run Prem Pro CS4 on a Windows XP (32bit) system with no problems at all.
I since upgraded my OS to Win7 x64 and a perculiar thing happened - when capturing from MiniDV the capture preview is very interlaced -with camera motion. With capture complete and clips placed in the timeline, the interlacing is not at all evident. - it is only apparent at the capture stage.
Thinking it was my Nvidia 8600GT graphics card, I upgraded to Nvidia 9800GT (1GB) - still the same problem. RAM was also give an upgrade to 8GB.
I understand the concept behind interlacing - what has me puzzled is why with win7 this capture interlacing has happened and for the sake of clarity would love to have it rectified.
Otherwise Premiere runs smooth as silk.
Any thoughts or advide would be greatly appreciated
Cheers
Matt
Gigabyte GA-P35-DS3P (rev 2.1)
Intel Q6600 Quad core
DDR2 - 8GB
Video: ASUS EN9800GT (1Gb)
HDD: sys.150GB + 2 x editing / authoring

Can't tell you why it happens. Can only suggest it's not really an issue. Ignore it and keep on editing.

Need help with pop-up

Need help with this one. All of a sudden I keep getting a
pop-up saying "cannot locate file flash.ocx". What the heck is it
and how do I get rid of it. It is QUITE annoying. Any help would be
appreciated.

I am glad to hear that changing or disabling the screensaver
seems to fix this problem for most of us. Certainly, screensavers
are pretty antiquated and pointless on the newer computers out
there, but there are still some uses. Ever since I turned mine off
on one computer and switched to an older screensaver on my oldest
computer, I have not had this problem. And, unfortunately, I think
the problem is isolated to such a small fraction of screensavers
that adobe is just going to let those distributors take care of the
problem rather than spending the time to fix whatever glitch is
affecting them. The only downside is that once you figure out the
problem, which can take time and effort, you could lose a pretty
cool screensaver. All in all, that isn't much in the long run,
certainly not enough to get adobe involved.

Help with flash installation

I have tried everyway i can find to install the latest 'flash
player' and for some reason once the installation dialogue box
appears and i click "install" nothing happends. ive been trying
from links aswell as directly from the official page and it still
does not work. I am able to install other programs and such just
not 'flash player'
can anyone help with this problem as im highly confused.
cheers
Richie

loysi wrote:
> Hi!
> I have a problem with the installation of Flash player 9
ActiveX.
> When I have completed the installation, a pop-up shows
up, which says "Error!
> Can't install
C:\WINDOWS\system32\Macromed\Flash\Flash9.ocx, please contact
> supporter" And that's what brings me to the question,
what is the problem and
> how do i fix it? Please answer!!!
go to adobe.com/support/flash
and look for installation troubleshooting
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Help with X-Fi Titanium

Hi, guys
I am on a Win7 OS & have just installed the X-fi Titanium.
Installed all drivers & software, connected my PC to my home surround system via digital out.
Here is my problem, when I switch my settings to DTS connect or Dolby Digital Li've, I am able to get sound thru the Creative speaker set up & I also get system sound thru, but I can't get sound playing video/audio files. When I turn DTS connect or Dolby Digital Li've off, I get sound thru, but obviously as PSM.
Is there anybody out there that can give me some help with my problem?
Thanks in advance,

To be honest with you Boon2 I have gotten the best results by installing in safemode & cleanboot state. I have tried installing the regular way from the desktop, but had no luck at all, that is why I'm here now because I couldn't install the software normal way. I've tried the install method suggested by creative T/S which was to install in a cleanboot state and delete the previous install in cleanboot & reinstall while in cleanboot I had no luck, I have also used Dri'vesweeper to delete all creative drivers while in safemode & regular way from the desktop.
The problem I think is the soundcard? is not being recognized, because when I finally got everything to install, software wise, when I reboot I would?get found new hardware (AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS) and in my device manager, I have a yellow (!) by OTHER DEVICES: AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS? And under the SOUND, VIDEO GAMING CONTROLS I have the following listed: AUDIO CODECS, LEGACY AUDIO DRIVER, LEGACY VIDEO CAPTURE DEVICES, MEDIA CONTROL DEVICES & VIDEO CODECS.
New if I try and delete the MS UAA BUS DRIVER from System Devices, then that would get ride of the AUDIO DEVICE ON HIGH DEFINITION AUDIO BUS? and I can install the latest CreativeDriver XFTI PCDRV LB 2 7 0006. But as soon as I reboot I get FOUND NEW HARDWARE WIZARD for MS UAA BUS DRIVER the driver installs for it and this also puts the AUDIO DEVICE ON HIGH DEFINITION BACK in my device manager.
How can I permanently get ride of the MS UAA BUS DRIVER?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Help with regsvr /i flash10c.ocx on Win7 x64

Similar Messages

Maybe you are looking for