Help with solman version and agents

We configured RCA in Solution Manager and would like to verify the agent versions we've installed if they are ok. Please note
The following installations in Solution Manager
Solution Manager v7.01 sp23 ehp1 sp06
Wiley EM 8.0.2
ISAGENT 8 SP2 (8.2.2.0.20100713084111) /LM-SERVICE 7.01 SP7
Diagnostic Agents 7.11
Following installations in managed systems
Version of most managed systems NW7.01
Diagnostic Agent 7.11
ISAGENT 8 SP2 (8.2.2.0.20100713084111) (as seen in Agent admin)
Are these versions correct? I've looked at numerous notes and they seem ok.
We've tested and almost all features are working. We did not install saphostagent and i was told by SAP it is absolutely required for NW7.11.
If we decide not to install the hostagents at our current version, would all RCA functionality work?
Thanks and appreciate your assistance on this.

Hello
The following installations in Solution Manager
Solution Manager v7.01 sp23 ehp1 sp06 = OK
Wily EM 8.0.2 --> I would update to 8.2.2.0 I'm not sure on your Wily vs ISAGENT versioning. The installation guide of Wily Introscope sais connecting a newer agent to an older version of Wily EM doesn't work properly, it doesn't specify if they mean ISAGENT 8 to Wily EM 7 or also ISAGENT 8.2.2 to EM 8.0.2 so I would update Wily EM to 8.2.2 to be sure
ISAGENT 8 SP2 (8.2.2.0.20100713084111) /LM-SERVICE 7.01 SP7 = OK
Diagnostic Agents 7.11 = OK
Following installations in managed systems
Version of most managed systems NW7.01
Diagnostic Agent 7.11 = OK
ISAGENT 8 SP2 (8.2.2.0.20100713084111) (as seen in Agent admin) = OK
Install the SAPHost Agents to make sure you have all relevant data available, make sure you check the SAP note concerning running SAPosCol as a service under the SAPHostAgent
Also make sure you implement the dispatcher in diagnostics (SAP note available to get dispatcher in diagnostics metrics) and a dashboard is also available to implement in Wily
Kind regards
Tom
Edited by: Tom Cenens on Nov 30, 2010 9:16 AM

Similar Messages

HELP WITH CS3 VERSION AND WINDOWS 8.1

I have just purchased Photoshop CS3 on Ebay. Unfortunately, I had no idea that it might not be compatible with windows 8.1. Before I open the package and have no way to return this product, can anyone tell me if they have been successful in uploading this program with Windows 8.1. I did find Adobe note saying that there were no known major issues ... but have read some other reviews that conflict with this information. Thanks so much for any help you could pass on. I do not want to "pay as you go" month to month for Photoshop ... would rather own an older version I am quite happy with. Thanks

Ok it's like the serial number model in that you download the actual Photoshop programs to your PC (you can install on up to two PCs or Macs for your own use). But instead of a serial number, you set up a recurring charge account, and you sign in to activate the program.
Your work can be saved anywhere on your computer just like the older serial number type. You keep your files even if you discontinue the subscription. Your files can still be opened by other programs, but if there was a feature exclusive to CC or CC 2014 you won't be able to edit it. But to answer your questions your files stay with you, Adobe doesn't see or possess any copies.
If you decide to stay on, what you get is upgrades and new versions as soon as they are released. No more upgrade fees. You get the Extended version of Photoshop with 3D and video editing features. Not bad for $10 a month.
You do get cloud storage, but only 2 GB and nothing goes there unless you upload it.
Think of it as a holding place for the files you wish to share with others.
You can get Bridge CC with the latest Adobe Camera Raw, and Lightroom for managing and editing large amounts of digital Photos.
Typekit if you want to add new fonts.
That's the short story, here are the ddetails and of course you can try before you buy.
Creative Cloud Photography plan | Adobe Creative Cloud
If you are heavy into Design, you might want the full Creative Cloud for $50/month with all the web, video, and publishing tools you want.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
So check it out and see what you think.
Gene

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

HT4550 Why does my Safari open with American version and home page with Apple iPhone 5 advert even though I have changed them in preference

Why does my Safari open with American version, and home page with Apple iPhone 5 advert even though I have changed them in preferences, it happens every time no matter how many times I change them, when I open Safari its back to the USA and Apple home page.

Try this.
Hold the shift key down and launch Safari.
Best.

Help with photoshop quitting and AMD graphics

help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

Hi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Hello I have a few questions and I need some help with my iTunes and iPod

Hello iTunes people.
I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
" The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
help !!
PROTEUS

*What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

Help with computer setup and PP settings for faster/better previews

I have been using Cyberlink PowerDirector software for video editing. It is very easy to use and can do quite a bit. It was also accelerated by Intel HD graphics built into my system, so I could see a lot of my work at a pretty high resolution in real time.
However, I wanted to see what PP was capable of, specifically the Warp Stabilizer.
So I downloaded PP and have been trying to use it, but it was just slow as heck to preview anything (chop stop chop stop...), with render times being insanely long (12 hours for five minutes of footage vs. about 30 minutes with PowerDirector).
Thinking it was a problem with my system and I needed to get a real graphics card, I got an EVGA GTX 670 (FTW) for $400, and popped it in. I modified the text file so PP would see it as a compatible card, opened up PP and changed the engine to the new card.
Things are faster, but I was expecting a lot more. Here's what I'm doing:
1. Shooting Canon 5D mark II (now III) clips 20-60 seconds long, 1080p.
2. Import to PP and sequence them.
3. Adding effects:
     A. Top adjustment layer for fast color correction (white balance)
     B. Next adjustment layer: 3-way color, shadow/highlight, unsharp mask, fast blur
     C. Video 1 layer has the clips with warp stabilizer applied to each, and dissolves.
My final output will be 720p. ( I shoot 1080p so the Warp Stabilizer will have more to work with, and I can crop without feeling like I'm degrading quality).
My system: i7 2600k, 16GB RAM, GTX 670 graphics, 120GB SSD "Max IOPS", 2TB 7200rpm internal, 2TB 7200rpm external (USB 2.0, backup drive).
I can currently preview at 1/4 res in realtime. I would really like to be able to get to 1/2 res (of course full would be great). One thing that worries me is that GPU-Z indicates that my GPU is only running at about 2% while previewing, while CPU usage is at around 50%. I was under the impression that the Mercury thing would use GPU/CUDA to process previews and effects that are supported (that includes Warp Stabilizer).
I've looked at Sequence Settings and fiddled with Preview File Format and size, but that doesn't seem to do anything. I'm currently looking around at codecs (Cineform, DNxHD), but don't know if those can help.
What settings should I alter to get better previews?

Well I'm still pretty clueless about this, but for anyone who is looking at this and wondering, here's what I've gleaned:
1. After Effects, especially CS6, makes much more and better use of graphics cards than does Premiere Pro. I'm guessing that PP will, in future versions, make better use of them. For now, no need to spend more than a couple hundred bucks on one.
2. Update the software. PP and AE both performed substantially better after installing the .01 update from adobe. After you install the update, be sure to re-do the CUDA hack, if necessary.
3. As it stands, money for a PP system is best spent on a processor, as in the newest Intel (currently Ivy Bridge), and overclocked. This is where performance happens. I'd say on a 2012 system, 16 GB RAM should be considered a minimum for video editing, and 24 or 32 if you can afford it. More than that probably won't be utilized. Hard disks can affect performance, but I don't think it's a bottleneck unless you're doing something that requires VERY fast/large reads and writes (4k source?). Most people who have high-end editing stations also have a bunch of drives in RAID, but if you look at the performance chart, the SECOND highest scoring tester did not use RAID (though did use a presumably fast and large SSD).
Keep in mind that all of this has to do with RENDER speeds. I still don't know what the bottleneck is for PREVIEWS, but I'm just going to assume it's the same.

Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

Hi there,
So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
Here's my current system profile:
iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
MacOS 10.6.1 Never updated.
3.06 Ghz Intel Core2 Duo
4Gb RAM
LaCie Big Disk via FireWire 800
Internet access via Ethernet port (cable)
And here's The Issues Log:
– Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
– 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
– After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
– 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
– Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.
As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
4. Replace HD for a brand new one and either step 1 or 3.
5. As a complement, I'm thinking of adding more RAM.
Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
And if it fits best in any other forum, please also let me know.
Cheers and thanks in advantage.

You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Help with Conditional Display and Validation

Version 4.1.1.00.23
Hello,
I'm having a difficult time with a conditional display and validation I'm hoping someone can help with.
Requirements:
When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox)
If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL)
What I've tried
Create a Dynamic Action on the Start Date
Event: Change
Selection Type:Item(s)
Items(s): P51_START_DATE
Condition: none
True Action Section:
Action: Show
Fire on Page Load: Checked
Show all page items on the same line: No
Affected Items Section:
Selection Type:Item(s)
Item(s): P51_CHANGE_REASON,P51_CHANGE_DESC
I've also created a Dynamic Action with similar settings for the P51_END_DATE.
I created a Validation for the P51_CHANGE_REASON as Function Returning Error Text:
DECLARE
    v_start_date    work_items.start_date%TYPE;
    v_end_date      work_items.end_date%TYPE;
BEGIN
    SELECT start_date
          ,end_date
    INTO   v_start_date
          ,v_end_date
    FROM   work_items
    WHERE work_items_id = :P51_WORK_ITEMS_ID;
    IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
          :P51_CHANGE_REASON IS NULL ) THEN
        RETURN 'Change Reason must have a value';
    END IF;
END;
The Issue
I tried to create another Dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields on page load, but when either of the date fields are changed and the validation is fired the P51_CHANGE_REASON and P51_CHANGE_DESC are hidden again.
There are two buttons to submit the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will submit the page and branch to the previous page (which is a report with EDIT buttons to edit the record).
I can't get the page load Dynamic Action to NOT fire when the validation is fired.
I hope this is clear and if not what information can I provide?
Thanks,
Joe

Phil,
Thank you for looking at this.
Yes if the Change Reason is NULL when the edit page is displayed then the Change Reason and Change Description fields are hidden. If the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox). If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL).
The problem I'm having is that if no Change Reason is entered and the page is saved thereby firing the validation the Change Reason and Change Description fields are hidden again (because of the On-Load Dynamic Action to hide them). So now the user can't put in a Change Reason...unless they change one of the date fields again which isn't going to be accepted.
Is there a way to determine if a validation error was fired and be able to use that on the On-Load Dynamic Action to hide the two fields? Something like...If the validation fired then don't run?
Please let me know if I'm still confusing you.
Thanks,
Joe

Help with colour profiles and wide gamut monitor

Hi there,
I know this issue must crop up a lot due to its confusing nature but I would really appreciate it if someone could explain what settings I should be using in Photoshop to get accurate colours. I had a look around and couldn't find any other discussions that answered this exactly.
My set up is a Dell 2408WFP monitor which is wide-gamut. I have calibrated this using a huey Pro calibrator (therefore have an accurate system colour profile). My photos are in Canon sRGB space, set by Digital Photo Professional (obviously easily changed if need be).
What I would like is to be able to preview what my photos will look like on a standard sRGB display. When I open a photo in Photoshop with all the settings on their default it looks extremely washed out, very low contrast and saturation. This is nothing like what the photos look like outside of Photoshop, and also not what the photos look like on other (normal gamut) displays. I have tried using the "proof colours" settings. When I have "proof setup" set to Internet Standard sRGB the colours look dreadful, oranges become blood-red, definitely not what I am getting when I view the image on a standard monitor. If I have it set to Monitor RGB then I get colours that look like my monitor outside of Photoshop -- this is the closest out of the three to the result I am actually getting on standard gamut displays. However I know it is not accurate because I know my monitor is wide gamut and therefore more has more contrast (and this is the case).
So what combination of photo colour space, proof colour space, and proof colours settings should I be using? My main priority is just the Joe Average using his TN panel monitor on facebook, I accept that on my monitor they will look slightly different. Settings for print don't concern me at the moment.
Thanks for the help. To anyone who will suggest that I read up on colour profiles... I have, and I understand them to an extent, but there are so many variables here that I am getting lost (monitor profile, photo profile, photoshop settings, DPP settings, faststone viewer's settings, browser's lack of awareness...)
Andrew

function(){return A.apply(null,[this].concat($A(arguments)))}
thekrimsonchin wrote:
I know this issue must crop up a lot due to its confusing nature
You have no idea.
What I'm reading is that you want Photoshop, with its color management enabled, to display your sRGB photos as they would be seen on a true sRGB monitor - i.e., accurately.
Something to always keep in mind, when everything's set right and working properly: Your sRGB image displayed on your wide gamut monitor without color management (e.g., by Internet Explorer) will look bolder and brighter (more color-saturated) than the same image displayed in Photoshop with color-management. There is no getting around this, because the sRGB profile is not equivalent to the monitor profile. Do not expect them to look the same.
It's hard, without being there and seeing what you're seeing, to judge whether your sRGB images are undersaturated compared to what's seen on other monitors. I do know, as one with sRGB monitors myself, that images can look quite vibrant and alive in the sRGB color space.
What we can't know is whether your judgment that your color-managed sRGB images are undersaturated is correct in an absolute sense, or whether you're just feeling the difference between seeing them on your monitor in non-color-managed apps and Photoshop.
Photoshop normally does its color management like this: It combines the information from the color profile in your document with the color profile of the monitor, which it retrieves from a standard place in Windows, and creates a transform used to display the colors.
To have it do this you would NOT want the Proof Colors setting enabled. It is the default behavior.
-Noel
P.S., I don't recall whether DPP is color-managed, but you might consider using Photoshop's raw converter, which definitely shows color-managed output, per the settings I described above.
P.P.S., Your calibrator/profiler should have put the monitor profile in the proper place and set all the proper stuff up in Windows. Is it specifically listed as compatible with the version of Windows you're running?

Help with intricate search and results display

Hi All,
I am looking for help with a problem I have, my knowledge on Numbers is limited, I have learnt a lot by trial and error but I do not know where to start on this problem.
What I am trying to do is display result from sheet 1 onto sheet 2 when I enter the letters of the REFERENCE into cell C3. Below is an example of the result I am tring to achieve -
SHEET 2
Reference
AB
Reference
SZone
Parts
LZone
Parts
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB10
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB11
3
75
2
100
AB12
3
75
2
100
AB12
3
75
2
100
AB13
3
75
3
75
AB13
3
75
3
75
AB14
3
75
3
75
AB14
3
75
3
75
AB15
3
75
1
200
AB15
3
75
1
200
AB16
3
75
3
75
AB16
3
75
3
75
AB21
3
75
3
75
AB21
3
75
3
75
AB22
3
75
3
75
I have searched for AB by entering it in cell B3 on Sheet 2, an auotmatic search has been carried out on Sheet 1 and all the columns have been brought into sheet 2 with the corresponding data and placed under the COLUMN HEADERS. I have over 4000 lines on Sheet 1, although the most result that will ever be pulled through will be 150.
When the data is pulled in I will need to do other calculation in the COLUMNS F, G and H so the data need to only be mapped to COLUMNS A to E.
Also I want to be able to use this spreadsheet on my iPad.
Has anybody got an idea/solution that will help.
Thanks in advance.
Ian

Ian,
We've had a recent report of troubles with large tables in the iOS version of Numbers, so you may want to consider ways to accomplish your goals without the full 4000-row set of data.
I re-read the problem statement in your original post and see that I should have known that you were needing a solution for both platforms. But, I'm still not clear on what part you have figured out and what part you still need help with. We often refer to your second table as a "Breakout Table". There are different ways to program it. My favorite is to add a column to the main table that identifies rows that meet the transfer criteria and assigns them a serial number to help determine where they should go in the second table.
Here's an example:
In the new column on the right edge of the table T1, the expression is:
=IF(ISERROR(FIND(T2 :: $A$1, A)), "", COUNT($F$1:F1))
Note that the first cell in the Aux column is seeded with a zero.
The expression in the body cells of the second table, T2, is:
=INDEX(T1, MATCH(ROW()-1, T1 :: $F, 0), COLUMN())
Note that the search term is to be entered into Cell A1 of table T2.
Does this give you a start?
Jerry

Can you help with RoboHelp Version 11: WebHelp Index Keyword Sorting?

I'm new to RoboHelp 11, and I am finding it difficult to alphabetize topics listed under my Index Keywords. When I look at the keyword topics in my RoboHelp HTML editor, they are listed in alphabetical order (see the Tools topic in the first image), but when I generate WebHelp the Tools topics are not in the correct order (second image). I believe that the problem pertains to new entries made to a converted RoboHelp Version 6 WebHelp application. Basically, I have been adding content to several old version 6-generated html files in the new RoboHelp HTML editor.
Another issue that's perplexing is the fact that the Move Up and Move Down icons at the top of the Index editor pod, or whatever it's called, are grayed-out (not functioning). I remember with the Version 6 application, they worked fine.
Can anyone offer any suggestions on how to get the index alphabetized? I appreciate your help.

Hi, pweb248
Just an expansion of what Rick has suggested. Binary index is only used when Microsoft HTML Help "CHM" is your primary layout. So, because WebHelp is your primary layout, Binary should definitely be unchecked. Selecting the Index file (HHK) is fairly standard for WebHelp use and it is sorted numerically and alphabetically by default. The HHK file contains all the Index keywords and their topic associations all tucked into one file, whereas adding Index Keywords using the "Topic" radio button embeds the coded reference right in the topic html file itself.
This online help topic explains a little more about the Sorting options depending on the primary layouts and whether Binary is selected.
Adobe RoboHelp 11 * Edit index keywords
This is the key paragraph:
>>Note: The Sort command is unavailable with a binary index. The sort function is enabled only when the primary layout is HTML Help and the Index is set to Index File with no Binary Index. In all other layouts, the index remains sorted but for HTML output, the sorting of the index can be changed. Sorting enables the up and down keys on Index Pod.<<
As you have noticed, your Index Designer view is apparently working as documented. I share your puzzlement about the out-of-sort listing in the WebHelp output shown in your screenshot. I wonder if there is some left-over crud from the ancient RoboHelp 6 code that is not converted properly and gumming up the works? Also curious if you have more than one Index in your project and if you are selecting the right one in the WebHelp Settings > Content dialog. Maybe Rick, Peter or Willam can shed some light on this?
John

HELP WITH VIDEO FILES AND PUTTING ON ITUNESSS!!!!!!!!!!

hey...i need help with my video ipod and itunes....i recently had sum problem with my ipod and i had to restore it...and when i hooked it up to itunes all the songs got back on it...its just that the videos never got updated with the songs....the videos are converted and were workin fine....now when i select the folder to put it into the itunes it says processing and nuttin happens...this is drivin me crazy anyone know how to fix this ****??
THX
5g ipod video

ok...i just uninstalled itunes and installed the previous version...and it worked fine....

Help with solman version and agents

Similar Messages

Maybe you are looking for